AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK, CYLINDER HEAD AND VALVE MECHANISM--Part 2 of 2 D9G TRACK-TYPE TRACTOR


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
PISTON & ROD GP
CRANKSHAFT GP
ELECTRICAL AND STARTING SYSTEM
STARTING AR

TRACK-TYPE TRACTOR D9G TRACK-TYPE TRACTOR 66A
 D9G TRACTOR / POWER SHIFT / 66A00001-03265 (MACHINE) UE036003 D9G 66A   (1961)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
4M-7000 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
 

#UE0360030160
 

CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM

CYLINDER BLOCK, CYLINDER HEAD AND VALVE MECHANISM--Part 2 of 2
c82657 UE036003
None CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4B-7264 [2] VALVE (EXHAUST)  
  1F-2254 [4] BUSHING  
  0L-0659 [4] STUD (1.375" LONG)  
  2A-5349 [4] STUD (1.562" LONG)  
  3B-0623 [2] PLUG  
  [14] BOLT  
  3B-4505 [14] LOCKWASHER  
  8F-5061 [1] COVER  
  3H-6194 [1] GASKET  
  5M-5827 [1] BEARING (OUTER)  
  8F-6868 [1] BUSHING (INNER)  
    (PARTS OF BLOCK ASSEM. 9H6199)
  9H-6199 [1] BLOCK ASSEM.  
  7M-6027 [1] GUIDE  
  9F-7674 [1] DOWEL  
  2A-3630 [2] DOWEL  
    (PARTS OF BLOCK ASSEM. 9H6199)
  8F-5112 [2] STUD (SHORT)  
  8F-5113 [2] STUD (LONG)  
  4B-7263 [2] VALVE (INTAKE)  
  2A-5349 [4] STUD  
    (PART OF BLOCK ASSEM. 9H6199)
  [2] PLUG  
    (PART OF BLOCK ASSEM. 9H6199)
  1A-4672 [2] PLUG  
    (PART OF BLOCK ASSEM. 9H6199)
  8F-3854 [4] SPRING  
  4B-7361 [4] RETAINER  
  2A-4429 [8] LOCK  
  1H-7641 [4] LIFTER ASSEM.  
  6H-4077 [1] DOWEL  
  2A-2352 [1] DOWEL  
  2A-5684 [1] STUD  
  5B-5812 [2] DOWEL  
  0L-0659 [4] STUD  
  1A-2223 [2] DOWEL  
    (PARTS OF BLOCK ASSEM. 9H6199)
 

#UE0360030161
 

CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM

CYLINDER BLOCK, CYLINDER HEAD AND VALVE MECHANISM--Part 1 of 2
Effective with Serial No. 66A1778-Up and Starting Engine Block No. F856-Up
c77618 UE036003
None CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9M-3266 [1] GAUGE ASSEM.  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  8M-4402 [1] COVER  
  8M-4403 [1] GASKET  
  9M-7742 [1] HOUSING ASSEM.  
  9F-2247 [1] PLUG (PIPE)  
    (PART OF HOUSING ASSEM. 9M7742)
  0T-0065 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  8M-7753 [1] BEARING  
  1M-0986 [1] BEARING  
    (PARTS OF HOUSING ASSEM. 9M7742)
  0S-1571 [3] BOLT (1.75" LONG)  
  0L-1143 [3] BOLT (2.50" LONG)  
  3B-4506 [6] LOCKWASHER  
  9M-3297 [1] GASKET  
  8M-9321 [1] BEARING  
    (PART OF HOUSING ASSEM. 9M7742)
  2H-3755 [4] BOLT  
  8F-5104 [1] SCREEN ASSEM.  
  6H-3083 [1] GASKET  
  8F-5105 [2] LOCK  
  0L-1352 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  7H-3171 [1] PLUG  
  5H-4211 [1] BUSHING  
    (PARTS OF PAN ASSEM. 9M7741)
  5H-4212 [1] PLUG (DRAIN)  
  4F-5192 [3] BOLT  
  1D-4707 [7] BOLT  
  9M-2848 [1] HEAD  
  8M-4306 [1] GASKET  
  2B-2695 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
  9M-9116 [1] COVER ASSEM.  
  8M-5014 [1] GASKET  
  8M-4420 [1] GASKET  
  0L-2070 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2A-2352 [1] DOWEL  
    (PART OF PAN ASSEM. 9M7741)
  0S-1571 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  0L-1143 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  9M-7741 [1] PAN ASSEM.  
  2B-7408 [1] PLUG  
  8M-5039 [1] TUBE  
  0L-1022 [2] PLUG (CORE)  
    (PARTS OF PAN ASSEM. 9M7741)
  4B-6074 [4] NUT  
  3B-4611 [4] COTTER PIN  
  3H-4190 [1] PLUG (MAGNETIC)  
  5B-5947 [1] GASKET  
 

#UE0360030162
 

CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM

CYLINDER BLOCK, CYLINDER HEAD AND VALVE MECHANISM--Part 2 of 2
Effective with Serial No. 66A1778-Up and Starting Engine Block No. F856-Up
c110558 UE036003
None CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9M-3265 [1] GUIDE  
  4F-1450 [6] STUD  
  2B-7408 [1] PLUG  
  8M-7874 [1] BEARING  
    (PARTS OF BLOCK ASSEM. 9M7733)
  8M-7867 [1] BUSHING  
  8F-6868 [1] BEARING  
    (PARTS OF BLOCK ASSEM. 9M7733)
  8M-4336 [1] BEARING  
  9F-2247 [1] PLUG (PIPE)  
  6F-0698 [1] DOWEL  
    (PARTS OF BLOCK ASSEM. 9M7733)
  2A-3630 [2] DOWEL  
    (PART OF BLOCK ASSEM. 9M7733)
  9F-7674 [1] DOWEL  
    (PART OF 9M7733 ASSEM.)
  8M-5017 [2] STUD  
    (PART OF BLOCK ASSEM. 9M7733)
  9M-7733 [1] BLOCK ASSEM.  
  9S-1343 [2] PLUG (CORE TOP)  
    (PART OF BLOCK ASSEM. 9M7733)
  8M-2553 [2] VALVE (INTAKE)  
  8M-2552 [2] VALVE (EXHAUST)  
  4F-1450 [2] STUD  
  8M-7559 [4] BUSHING  
    (PARTS OF BLOCK ASSEM. 9M7733)
  8F-3854 [4] SPRING  
  2A-4429 [8] LOCK  
  4B-7361 [4] RETAINER  
  1H-7640 [4] SCREW  
    (1 IN EACH LIFTER ASSEM. 8M2559)
  9M-4202 [1] PLUG  
  4B-8407 [1] GASKET  
  8M-2559 [4] LIFTER ASSEM.  
  0L-0659 [4] STUD  
    (PART OF BLOCK ASSEM. 9M7733)
  2F-0194 [1] STUD  
    (PART OF BLOCK ASSEM. 9M7733)
  5B-5812 [2] DOWEL  
    (PART OF BLOCK ASSEM. 9M7733)
  2A-2352 [1] DOWEL  
    (PART OF 9M7733 ASSEM.)
  6H-4077 [1] DOWEL  
  1A-2223 [2] DOWEL  
  8F-5113 [2] STUD  
    (PARTS OF BLOCK ASSEM. 9M7733)
 

#UE0360030163
 

9H-6218: CRANKSHAFT

CRANKSHAFT (9H6218 N/S)
Serial No. 66A1 to 66A1777 inclusive
c135289 UE036003
9H6218 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6H-9739 [1] GEAR (31 TEETH)  
  1B-8714 [1] KEY  
  8F-3852 [1] BEARING (STANDARD)  
  7H-1927 [1] BEARING (.020" U'' SIZE)  
  1H-2754 [1] BEARING (.030" U'' SIZE)  
  8F-5101 [1] WASHER  
  6F-7043 [1] NUT  
  3B-4618 [1] COTTER PIN  
  7M-4671 [1] CRANKSHAFT  
  8H-2064 [1] GEAR (86 TEETH)  
    (PART OF ASSEM. 3H5024)
  6F-7030 [12] BOLT  
  3H-6741 [1] LOCK  
  3H-5024 [1] FLYWHEEL ASSEM.  
  8M-4499 [1] BEARING (STANDARD)  
  9M-1119 [1] BEARING (.020" U'' SIZE)  
  9M-0415 [1] BEARING (.030" U'' SIZE)  
 

#UE0360030164
 

8F-2738: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (8F2738 N/S)--2 Required
Serial No. 66A1 to 66A1777 inclusive
c58599 UE036003
8F2738 CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9H-1407 RING GRP. (STD.)  
  9H-1408 RING GRP. (.010" O'' SIZE)  
  9H-1409 RING GRP. (.020" O'' SIZE)  
  9H-1410 RING GRP. (.030" O SIZE)  
  9H-1411 RING GRP. (.040" O'' SIZE)  
  9H-1412 RING GRP. (.060" O'' SIZE)  
    (EACH GRP. CONSISTS OF A COMPLETE SET OF RINGS FOR ONE PISTON.)
  1H-3502 [2] RING (STD. COMP.)  
  6H-3103 RING (.010" O'' SIZE)  
  6H-3104 RING (.020" O'' SIZE)  
  6H-3105 RING (.030" O'' SIZE)  
  6H-3106 RING (.040" O'' SIZE)  
  6H-3107 RING (.060" O'' SIZE)  
  3B-6806 [1] RING (STD. OIL REG)  
  4B-8819 RING (.010" O'' SIZE)  
  4B-8820 RING (.020" O'' SIZE)  
  4B-8821 RING (.030" O'' SIZE)  
  4B-8822 RING (.040" O'' SIZE)  
  5H-1414 RING (.060" O'' SIZE)  
  8F-2944 [1] ROD ASSEM.  
  4B-7463 [2] BEARING (STD.)  
  5B-4317 [2] BEARING (.020" U'' SIZE)  
  1H-2751 [2] BEARING (.030" U'' SIZE)  
  4B-6072 [2] NUT  
  3B-4611 [2] COTTER PIN  
    (PARTS OF ROD ASSEM.)
  5B-4581 [2] BOLT  
  8F-9561 [1] BUSHING  
    (PARTS OF ROD ASSEM.)
  1H-3024 [1] PISTON (STD.)  
  6H-3100 PISTON (.020" O'' SIZE)  
  6H-3101 PISTON (.040" O'' SIZE)  
  6H-3102 PISTON (SEMI-FINISHED)  
    (SEMI-FINISHED PISTON MAY BE FINISHED UP TO .060" OVERSIZE)
  8B-9421 [2] RETAINER  
  1C-0002 [1] PIN (STD.)  
  1C-2235 [1] PIN (.007" O'' SIZE)  
 

#UE0360030165
 

CRANKSHAFT

CRANKSHAFT
Effective with Serial No. 66A1778-Up and Starting Engine Block No. F856-Up
c105227 UE036003
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-4410 [1] GEAR (25 TEETH)  
  1B-8714 [1] KEY  
  4H-5232 [2] PIN  
  8F-3852 [1] BEARING (STANDARD)  
  7H-1927 [1] BEARING (.020" U'' SIZE)  
  1H-2754 [1] BEARING (.030" U'' SIZE)  
  8M-4430 [1] WASHER  
  2S-0115 [1] WASHER  
  6F-7043 [1] NUT  
  3B-4618 [1] COTTER PIN  
  4S-5352 [1] CRANKSHAFT  
  8F-5027 [1] GEAR (86 TEETH)  
    (PART OF FLYWHEEL ASSEM. 3H5024)
  6F-7030 [12] BOLT  
  3H-6741 [1] LOCK  
  3H-5024 [1] FLYWHEEL ASSEM.  
  8M-4499 [1] BEARING (STANDARD)  
  9M-1119 [1] BEARING (.020" U'' SIZE)  
  9M-0415 [1] BEARING (.030" U'' SIZE)  
 

#UE0360030166
 

CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON--2 Required
Effective with Serial No. 66A1778-Up and Starting Engine Block No. F856-Up
c87666 UE036003
None CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9H-1407 RING GROUP (STANDARD)  
  9H-1408 RING GROUP (.010" OVERSIZE)  
  9H-1409 RING GROUP (.020" OVERSIZE)  
  9H-1410 RING GROUP (.030" OVERSIZE)  
  9H-1411 RING GROUP (.040" OVERSIZE)  
    (EACH GROUP CONSISTS OF A COMPLETE SET OF RINGS FOR ONE PISTON)
  1H-3502 [2] RING  
    (STANDARD COMPRESSION)
  6H-3103 RING (.010" OVERSIZE)  
  6H-3104 RING (.020" OVERSIZE)  
  6H-3105 RING (.030" OVERSIZE)  
  6H-3106 RING (.040" OVERSIZE)  
  3B-6806 [1] RING (STANDARD OIL)  
  4B-8819 RING (.010" OVERSIZE)  
  4B-8820 RING (.020" OVERSIZE)  
  4B-8821 RING (.030" OVERSIZE)  
  4B-8822 RING (.040" OVERSIZE)  
  8M-2549 [1] ROD ASSEM.  
  4B-7463 [2] BEARING (STANDARD)  
  5B-4317 [2] BEARING  
    (.020" UNDERSIZE)
  1H-2751 [2] BEARING  
    (.030" UNDERSIZE)
  4B-6072 [2] NUT  
  3B-4610 [2] COTTER PIN  
    (PARTS OF ROD ASSEM. 8M2549)
  5B-4581 [2] BOLT  
  8M-2551 [1] BEARING  
    (PARTS OF ROD ASSEM.8M2549)
  8M-4301 [1] PISTON (STANDARD)  
  9M-0570 PISTON (.020" OVERSIZE)  
  9M-0571 PISTON (.040" OVERSIZE)  
  8B-9514 [2] RETAINER  
  8M-4323 [1] PIN (STANDARD)  
 

#UE0360030167
 

CAMSHAFT AND GOVERNOR

CAMSHAFT AND GOVERNOR
Serial No. 66A1778 to 66A1865 inclusive and Starting Engine Block No. F856 to F1612 inclusive
c73183 UE036003
None CAMSHAFT AND GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-6045 [1] SPRING  
  9M-3142 [1] LEVER ASSEM.  
  2A-0762 [1] BOLT  
  1B-8735 [1] KEY  
  9M-9922 [1] YOKE  
  1B-8705 [1] KEY  
  5H-4495 [1] PINION (22 TEETH)  
  1B-8706 [1] KEY  
  8M-4361 [1] SHAFT  
  8M-4401 [1] GEAR (25 TEETH)  
  0L-1351 [1] BOLT  
  8M-4334 [1] LOCK  
  7H-1642 [1] WASHER  
  1B-8714 [1] KEY  
  8M-4338 [1] WASHER  
  1A-2029 [1] BOLT  
  8M-7640 [1] LOCKWASHER  
  1M-7224 [1] DRIVER  
  8M-4386 [1] GEAR (22 TEETH)  
  4B-9786 [3] BALL  
  9M-4100 [1] GEAR (50 TEETH)  
  9M-0011 [1] RAMP  
  8M-4396 [1] GEAR (22 TEETH)  
  1H-3781 [1] SCREW  
  1B-4202 [1] NUT  
  1A-8285 [1] NUT  
  8M-7536 [1] WASHER  
  6F-6204 [1] LOCK  
  2A-0762 [2] BOLT  
  8M-4404 [1] CAMSHAFT  
  8B-1312 [1] DOWEL  
  7M-3956 [1] SEAL  
 

#UE0360030168
 

CAMSHAFT AND GOVERNOR

CAMSHAFT AND GOVERNOR
Effective with Serial No. 66A1866-Up and Starting Engine Block No. F1613-Up
c89372 UE036003
None CAMSHAFT AND GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-6045 [1] SPRING  
  9M-3142 [1] LEVER ASSEM.  
  2A-0762 [1] BOLT  
  1B-8735 [1] KEY  
  9M-9922 [1] YOKE  
  1B-8705 [1] KEY  
  5H-4495 [1] PINION  
    (22 TEETH)
  1B-8706 [1] KEY  
  8M-4361 [1] SHAFT  
  8M-4401 [1] GEAR (25 TEETH)  
  0L-1351 [1] BOLT  
  8M-4334 [1] LOCK  
  7H-1642 [1] WASHER  
  1B-8714 [1] KEY  
  8M-4338 [1] WASHER  
  1A-2029 [1] BOLT  
  8M-7640 [1] LOCKWASHER  
  1M-7224 [1] DRIVER  
  8M-4386 [1] GEAR (22 TEETH)  
  4B-9786 [3] BALL  
  9M-4100 [1] GEAR (50 TEETH)  
  9M-0011 [1] RAMP  
  8M-4396 [1] GEAR (22 TEETH)  
  1S-0260 [1] BOLT  
  5B-3180 [1] NUT  
  5B-3180 [1] NUT  
  8M-7536 [1] WASHER  
  6F-6204 [1] LOCK  
  2A-0762 [2] BOLT  
  8M-4404 [1] CAMSHAFT  
  8B-1312 [1] DOWEL  
  7M-3956 [1] SEAL  
 

#UE0360030169
 

CAMSHAFT AND GOVERNOR

CAMSHAFT AND GOVERNOR
c67230 UE036003
None CAMSHAFT AND GOVERNOR Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9H-6163 [1] PINION ASSEM.  
  5H-4495 [1] GEAR (22 T.)  
  1B-8706 [1] KEY  
    (PARTS OF ASSEM. 9H6163)
  9H-6164 [1] GEAR (31 T.)  
  1B-8705 [1] KEY  
  0L-1351 [1] BOLT  
  [1] LOCK  
  7H-1642 [1] WASHER  
  1B-8714 [1] KEY  
  2A-0762 [1] BOLT  
  7H-1698 [1] WASHER (FELT)  
  1M-5927 [1] WASHER (STEEL)  
  7M-6045 [1] SPRING  
  7M-6040 [1] LEVER ASSEM.  
  1B-8735 [1] KEY  
  4M-6341 [1] CAMSHAFT  
  7H-0521 [1] YOKE  
  1M-7224 [1] DRIVER  
  4B-9786 [3] BALL  
  7H-0506 [1] RAMP ASSEM.  
  7H-0573 [1] GEAR (62T.)  
  1H-3781 [1] SCREW  
  1B-4202 [1] NUT  
  1A-8285 [1] NUT  
  2A-0762 [2] BOLT  
  7H-3277 [1] WASHER  
  6F-6204 [1] LOCK  
 

Information:

Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 7N4013 Or 7N6342 Cylinder Block Service Group And 7N4134 Hardware Kit{1201}
Installation Of 7N4013 Or 7N6342 Cylinder Block Service Group And 7N4134 Hardware Kit{1201}
Use Of 5P8595 Honing Tool Group{1216}
Use Of 5P8595 Honing Tool Group{1216}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Magazine
New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
1980/03/31
Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks{1217,1201}
1981/03/09
Improved Head Gasket Has Larger Fire Ring To Decrease Fretting {1101,1201}
1981/10/26
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
1982/01/11
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates{1217,1201,0664}
1982/07/05
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Cylinder Block With Spacer Plate Used With New Cylinder Heads, Cylinder Head Gaskets, Cylinder Liners And Timing Gear Housing{1101,1162,1201,1216}
1977/05/02
Improved Keystone Piston Assembly{1214,1216}
1977/05/02
Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons{0664,1214,1216}
1977/07/04
New Inserts To Repair Cylinder Liner Seats On D353 Engine Blocks{1201,1216,1217,0663,0653}
1977/07/11
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Cylinder Head Gasket Has Smaller Diameter Cylinder Openings To Improve Location Of Combustion Seal Ring{1101,1201}
1979/08/13
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel{1217,1201,0663}
1979/10/01
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D9G :

CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
WATER LINES GROUP
9M-7895 WATER LINES GROUP
OIL GAUGE FUEL GAUGE AND HEAT INDICATOR
OIL GAUGE FUEL GAUGE AND HEAT INDICATOR
WATER LINES GROUP
4M-3304 WATER LINES GROUP
OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR
5M-6580 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR
TORQUE CONVERTER OIL COOLER AND LINES GROUP
9S-3190 TORQUE CONVERTER OIL COOLER AND LINES GROUP
TORQUE CONVERTER AND ENGINE OIL COOLER
TORQUE CONVERTER AND ENGINE OIL COOLER
OIL LINES
OIL LINES
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK CYLINDER HEAD AND VALVE MECHANISM
CRANKSHAFT
9H-6218 CRANKSHAFT
CONNECTING ROD AND PISTON
8F-2738 CONNECTING ROD AND PISTON
CRANKSHAFT
CRANKSHAFT
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
CAMSHAFT AND GOVERNOR
CAMSHAFT AND GOVERNOR
CAMSHAFT AND GOVERNOR
CAMSHAFT AND GOVERNOR

Truck sale:

Caterpillar D9G
 
Caterpillar D9G
- Crawler dozers
HOLT CAT
Caterpillar D9G, Crawler dozers, Construction
 
Caterpillar D9G, Crawler dozers, Construction
- Crawler dozers
WILLIAM ADAMS PTY. LTD.
 
26.828 
Caterpillar D9G, Bulldozer, Bau-Und Bergbauausrüstung


1971 CAT D9G
USD $14,900 
1971 CAT D9G

Binkley Equipment
Rochester, Minnesota
1970 CAT D9G
Call 
1970 CAT D9G

Auto Express
RICH CREEK, Virginia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.