AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S5098 CYLINDER BLOCK ASSEMBLY Serial No. 46B4562 to 46B6422 inclusive Part of Cylinder Block and Covers shown on Pages 26F & 26H D353C


BASIC ENGINE
CYLINDER BLOCK GP
PAN GP-OIL
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

INDUSTRIAL ENGINE D353C INDUSTRIAL ENGINE 46B
 D353 ENGINE 46B01558-UP UE036088 D353C 46B   (1964)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK ASSEMBLY
5S-5098 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
5S-5098 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
5S-5098 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
7N-2053 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
7N-1497 CYLINDER BLOCK AS
 

#UE0360880090
 

5S-5098: CYLINDER BLOCK ASSEMBLY

5S5098 CYLINDER BLOCK ASSEMBLY
Serial No. 46B4562 to 46B6422 inclusive
Part of Cylinder Block and Covers shown on Pages 26F & 26H
c161723 UE036088
5S5098 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-2213 [1] TUBE  
  3H-9806 [38] STUD  
  5H-2214 [1] TUBE  
  9F-2247 C [1] PLUG  
  2H-7878 [1] BUSHING  
  4B-8945 [2] PIN  
  2H-2329 [3] BEARING  
  5M-6213 [7] PLUG  
  3J-5390 [1] PLUG  
  7B-2335 [3] STUD  
  1P-4337 [4] CAP  
    (INTERMEDIATE)
  5B-5812 [1] DOWEL  
  1P-4322 [2] CAP  
    (CENTER AND REAR)
  1P-0668 C [14] STUD  
  1A-1935 [14] NUT  
  8F-6575 [1] PLUG  
  3H-7935 [2] DOWEL  
  1T-0068 [4] PIN  
  7M-4249 [2] STUD  
  5M-6214 [4] PLUG  
  1A-2223 [4] DOWEL  
  2H-2330 [6] BEARING  
  0L-2288 [1] PLUG  
  5H-2212 [1] TUBE  
  0T-0398 [4] STUD  
  3B-0342 [1] PLUG  
  3H-3130 [2] DOWEL  
  8F-9635 [2] STUD  
  1H-0974 [2] DOWEL  
  1A-1593 [2] STUD  
  5H-1029 [1] TUBE ASSEM.  
  1P-4298 [1] CAP (FRONT)  
  0S-1621 [2] BOLT  
  2B-1738 [2] LOCK  
  C   INDICATES CHANGE
 

#UE0360880091
 

7N-2053: CYLINDER BLOCK ASSEMBLY

7N2053 CYLINDER BLOCK ASSEMBLY
Serial No. 46B6422 to 46B6446 inclusive
Part of 7L5469 Cylinder Block and Covers Group shown on Page 27A
c165723 UE036088
7N2053 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 C [1] PLUG  
2. 2H-7878 [1] BUSHING  
3. 5M-6214 C [4] PLUG  
4. 2H-2330 [6] BEARING  
5. 5H-2213 [1] TUBE  
6. 3H-9806 [35] STUD  
7. 1T-0068 [4] PIN (spring-slotted)  
  3H-7935 [2] DOWEL  
8. 1A-2223 [4] DOWEL  
9. 5H-2214 [1] TUBE  
10. 5M-6213 [7] PLUG  
11. 0L-2288 [1] 0LUG  
12. 3J-5390 [1] PLUG  
13. 5H-2212 [1] TUBE  
14. 1H-0974 [2] DOWEL  
15. 3B-0342 [1] PLUG  
16. 1P-4298 [1] CAP (front)  
17. 3H-3130 [2] DOWEL  
18. 0S-1621 [2] BOLT  
  2B-1738 [2] LOCK  
19. 5H-1029 [1] TUBE ASSEM.  
20. 8F-6575 [1] PLUG  
21. 1P-0668 [14] STUD  
  1A-1935 [14] NUT  
22. 1P-4322 [2] CAP (center & rear)  
23. 0T-0398 [4] STUD  
24. 2H-2329 [3] BEARING  
25. 1P-4337 [4] CAP  
26. 4B-8945 [2] DOWEL  
27. 5B-5812 [1] DOWEL  
28. 7B-2335 [3] STUD  
  C   INDICATES CHANGE
 

#UE0360880092
 

7N-1497: CYLINDER BLOCK AS

7N1497 CYLINDER BLOCK ASSEMBLY
Serial No. 46B6447-Up
Part of 7N3041 Cylinder Block and Covers and 7N4013 Cylinder Block Groups shown on Pages 27E, 27H and 28-1
c213377 UE036088
7N1497 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [ 1] PLUG  
2. 2H-7878 [ 1] BUSHING  
3. 5M-6214 [ 4] PLUG  
4. 2H-2330 [ 6] BEARING  
5. 5H-2213 [ 1] TUBE  
6. 1S-9540 [ 2] DOWEL  
7. 1A-2610 [ 4] DOWEL  
8. 7H-3171 [ 1] PLUG  
9. 5H-2214 [ 1] TUBE  
10. 5M-6213 [ 1] PLUG  
11. 0L-2288 [ 1] PLUG  
12. 3J-5390 [ 1] PLUG  
13. 5H-2212 [ 1] TUBE  
14. 1H-0974 [ 1] DOWEL  
15. 1B-5170 [ 1] PLUG  
16. 1P-4298 [ 1] CAP (front)  
17. 3H-3130 [ 2] DOWEL  
18. 0S-1621 [ 2] BOLT  
  2B-1738 [ 2] LOCK  
19. 5H-1029 [ 1] TUBE ASSEM.  
20. 8F-6575 [ 1] PLUG  
21. 1P-0668 [ 14] STUD  
  1A-1935 [ 14] NUT  
22. 1P-4322 [ 2] CAP (center & rear)  
23. 0T-0398 [ 4] STUD  
24. 2H-2329 [ 3] BEARING  
25. 1P-4337 [ 4] CAP  
26. 4B-8945 [ 2] DOWEL  
27. 5B-5812 [ 1] DOWEL  
28. 7B-2335 [ 3] STUD  
 

#UE0360880093
 

2L-3512: PAN GP-OIL

2L3512 OIL PAN GROUP
Refer also to Page 153 for special parts.
c91725 UE036088
2L3512 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8F-4103 [1] COVER ASSEM.  
  7H-3460 [1] CABLE ASSEM.  
  2L-4351 [1] PLUNGER ASSEM.  
  0S-1587 [10] BOLT  
  3L-5686 [2] LOCK  
  2L-3451 [1] GASKET  
  9M-5251 [1] PAN  
  8F-8804 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  0S-1573 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  0S-1585 [44] BOLT  
  3B-4508 [44] LOCKWASHER  
  6L-5038 [1] GASKET  
  2B-7411 [2] PLUG  
  8F-4102 [1] PLATE  
  5B-5980 [1] GASKET  
  8F-4099 [1] GASKET  
  3B-4615 [1] COTTER PIN  
  1L-9138 [1] ADAPTER  
  6L-2504 [1] COVER ASSEM.  
  7F-9396 [1] TUBE  
    (PART OF COVER ASSEM.6L2504)
  2L-3549 [1] GASKET  
  2L-3426 [1] PAN  
  2L-3548 [1] COVER  
  2L-3549 [1] GASKET  
  0S-0509 [34] BOLT  
  038-4506 [34] LOCKWASHER  
 

#UE0360880094
 

CRANKSHAFT

CRANKSHAFT
Serial No. 77B1 to 77B121 inclusive
Refer also to Page 158 for special parts
c88874 UE036088
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-2059 [1] RING  
  9M-3894 [4] BEARING  
  4M-8133 [1] THROWER  
  4M-8010 [6] RING  
  0L-1024 [6] PLUG  
    (PARTS OF CRANKSHAFT ASSEM.1M2800)
  9M-3896 [1] BEARING  
  1M-2800 [1] CRANKSHAFT ASSEM.  
  5M-2632 [1] DAMPER  
  9M-3895 [1] BEARING  
  6H-5844 [1] RING  
  7H-3482 [1] THROWER  
  9M-3893 [1] BEARING  
  0S-1626 [8] BOLT  
  3K-3008 [3] LOCK  
  5M-3351 [1] LOCK  
 

#UE0360880095
 

CRANKSHAFT

CRANKSHAFT
SERIAL NO. 46B1558 TO 46B1855 INCLUSIVE AND 77B122 TO 77B130 INCLUSIVE
REFER ALSO TO PAGE 158 FOR SPECIAL PARTS
c91047 UE036088
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1594 [12] BOLT  
  7H-3070 [6] LOCK  
  9M-3894 [4] BEARING  
  1S-8607 [1] BAFFLE  
  5H-2669 [1] GASKET  
  2S-2059 [1] RING  
  2S-2430 [1] THROWER  
  4M-8010 [6] RING  
  0L-1024 [6] PLUG  
    (PARTS OF CRANKSHAFT ASSEM.1M2800)
  9M-3896 [1] BEARING  
  1M-2800 [1] CRANKSHAFT ASSEM.  
  5M-2632 [1] DAMPER  
  9M-3895 [1] BEARING  
  6H-5844 [1] RING  
  7H-3482 [1] THROWER  
  9M-3893 [1] BEARING  
  0S-1626 [8] BOLT  
  3K-3008 [3] LOCK  
  5M-3351 [1] LOCK  
 

#UE0360880096
 

CRANKSHAFT

CRANKSHAFT
SERIAL NO. 46B1856 TO 46B2275 INCLUSIVE AND 77B131 TO 77B235 INCLUSIVE
REFER ALSO TO PAGE 158 FOR SPECIAL PARTS
c95684 UE036088
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1594 [12] BOLT  
  7H-3070 [6] LOCK  
  9M-3894 [4] BEARING  
  1S-8607 [1] BAFFLE  
  5H-2669 [1] GASKET  
  2S-2059 [1] RING  
  2S-2430 [1] THROWER  
  9M-3896 [1] BEARING  
  0L-1024 [6] PLUG  
    (2.25" DIAMETER)
    -OR-
  1A-2358 [6] PLUG  
    (2.375" DIAMETER)
  4M-8010 [6] RING  
    (2.393" INSIDE DIAMETER)
    -OR-
  1S-0554 [6] RING  
    (2.523" INSIDE DIAMETER)
    (PARTS OF CRANKSHAFT ASSEM. 1M2800)
  6L-6595 [1] DAMPER  
  9M-3895 [1] BEARING  
  6H-5844 [1] RING  
  7H-3482 [1] THROWER  
  9M-3893 [1] BEARING  
  0S-1626 [8] BOLT  
  3K-3008 [3] LOCK  
  5M-3351 [1] LOCK  
  1M-2800 [1] CRANKSHAFT ASSEM.  
 

#UE0360880097
 

7L-5468: CRANKSHAFT GP

CRANKSHAFT (7L5468 N/S)
Serial No. 46B2276 to 46B3674 inclusive and 77B236-Up
Refer also to Page 158 for special parts
c120668 UE036088
7L5468 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1594 [12] BOLT  
  7H-3070 [6] LOCK  
  7S-8293 [4] BEARING  
  1S-8607 [1] BAFFLE  
  5H-2669 [1] GASKET  
  7S-0662 [1] RING  
  2S-2430 [1] THROWER  
  7S-8295 [1] BEARING  
  0L-1024 [6] PLUG  
    (2.25" DIAMETER)
    -OR-
  1A-2358 [6] PLUG  
    (2.375" DIAMETER)
  4M-8010 [6] RING  
    (2.393" INSIDE DIAMETER)
    -OR-
  1S-0554 [6] RING  
    (2.523" INSIDE DIAMETER)
    (PARTS OF CRANKSHAFT ASSEM. 1M2800)
  6L-6595 [1] DAMPER  
  7S-8294 [1] BEARING  
  6H-5844 [1] RING  
  7H-3482 [1] THROWER  
  7S-8292 [1] BEARING  
  0S-1626 [8] BOLT  
  3K-3008 [3] LOCK  
  5M-3351 [1] LOCK  
  1M-2800 [1] CRANKSHAFT ASSEM.  
 

#UE0360880098
 

7L-5468: CRANKSHAFT GP

7L5468 CRANKSHAFT GROUP
Serial No. 46B3675-Up
Refer also to Page 158 for special parts
c133898 UE036088
7L5468 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [12] BOLT  
  [6] LOCK  
  [4] BEARING  
  [1] BAFFLE  
  [1] GASKET  
  [1] RING  
  [1] THROWER  
  [1] BEARING  
  [1] DAMPER  
  [1] BEARING  
  [1] RING  
  [1] THROWER  
  [1] BEARING  
  [8] BOLT  
  [3] LOCK  
  [1] LOCK  
  [1] CRANKSHAFT  
 

#UE0360880099
 

GASKET KITS

GASKET KITS
FOR USE WITH 7N3199 ENGINE ARRANGEMENT
Serial No. 46B6447-Up
UE0360880099 UE036088
  For full view, you need register

Parts for your D353C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-8964 VALVE GRINDING COMPLETE  
  5P-8965 VALVE GRINDING SINGLE HEAD  
  5P-8969 CENTRAL AND LOWER STRUCTURE  
  5P-8970 LINER SINGLE CYLINDER  
  5P-8971 FRONT STRUCTURE  
  5P-8972 REAR STRUCTURE  
  5P-8977 AFTERCOOLER  
  5P-8981 OIL LINES  
  5P-8982 FUEL SYSTEM  
  5P-8966 WATER COOLED MANIFOLD  
  5P-8968 DRY MANIFOLD  
  5P-8974 WATER PUMP  
  5P-8975 TURBOCHARGER  
  5P-8980 OIL COOLER  
 

Information:

Engine News
Information About The Use Of Earlier Cylinder Heads And Liners With Spacer Plate Cylinder Blocks; List Of Earlier Articles
1979/03/14
New Filler Bands Give A Better Seal Between The Cylinder Liners And Cylinder Block
1979/05/23
New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel
1979/09/19
New Cylinder Liner Has Improved Design To Keep Liner Temperatures Lower
1980/02/06
New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks
1981/04/01
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life
1981/04/22
6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10
New Liner Seat Insert With O-Ring Seal Available
1982/02/10
Inspection Marks On Bearings
1982/05/12
Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates
1982/08/25
New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/10/20
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Improved Cylinder Block With Spacer Plate Used With New Cylinder Heads, Cylinder Head Gaskets, Cylinder Liners And Timing Gear Housing
1977/05/03
Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons
1977/06/29
New Inserts To Repair Cylinder Liner Seats On D353 Engine Blocks
1977/07/13
Use Only The Larger Size Inserts To Make A Repair To Cylinder Block Counterbores For Cylinder Liners
1977/09/28
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates
1978/05/24
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of 7N4013 Or 7N6342 Cylinder Block Service Group And 7N4134 Hardware Kit{1201}
Installation Of 7N4013 Or 7N6342 Cylinder Block Service Group And 7N4134 Hardware Kit{1201}
Use Of 5P8595 Honing Tool Group{1216}
Use Of 5P8595 Honing Tool Group{1216}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Installation Of 1W6265, 1W6266 And 1W6267 Insert For Cylinder Liner Seat{1217}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Reconditioning Of Cylinder Heads For Use On Spacer Plate Cylinder Blocks{1101}
Reconditioning Of Cylinder Heads For Use On Spacer Plate Cylinder Blocks{1101}
Installation Of 8N6938 Or 8N6939 Inserts{1217}
Installation Of 8N6938 Or 8N6939 Inserts{1217}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Specifications
Cylinder Block<BR> (With Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES
Cylinder Block<BR> (Without Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES
Cylinder Liner
D353 INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection<BR> (With Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection<BR> (Without Spacer Plate)
D353 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Disassembly and Assembly
Piston Cooling Tubes
D353 INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
D353 INDUSTRIAL & MARINE ENGINES
Spacer Plate
D353 INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
D353 INDUSTRIAL & MARINE ENGINES
Cylinders Liners (Earlier)
D353 INDUSTRIAL & MARINE ENGINES
Cylinder Liners (Later)
D353 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Cylinder Liner Has Improved Design To Keep Liner Temperatures Lower{1216}
1980/02/04
New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
1980/03/31
Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks{1217,1201}
1981/03/09
New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/06
Improved Head Gasket Has Larger Fire Ring To Decrease Fretting {1101,1201}
1981/10/26
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
1982/01/11
New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group{0622,1217}
1982/01/25
New Liner Seat Insert With O-Ring Seal Available{1217,1216}
1982/01/25
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates{1217,1201,0664}
1982/07/05
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Cylinder Block With Spacer Plate Used With New Cylinder Heads, Cylinder Head Gaskets, Cylinder Liners And Timing Gear Housing{1101,1162,1201,1216}
1977/05/02
Improved Keystone Piston Assembly{1214,1216}
1977/05/02
Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons{0664,1214,1216}
1977/07/04
New Inserts To Repair Cylinder Liner Seats On D353 Engine Blocks{1201,1216,1217,0663,0653}
1977/07/11
Use Only The Larger Size Inserts To Make A Repair To Cylinder Block Counterbores For Cylinder Liners{1201,1216,1217}
1977/10/10
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Information About The Use Of Earlier Cylinder Heads And Liners With Spacer Plate Cylinder Blocks; List Of Earlier Articles{0600,1101,1162,1201,1216,1221}
1979/03/26
New Filler Bands Give A Better Seal Between The Cylinder Liners And Cylinder Block{1201,1216}
1979/05/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Cylinder Head Gasket Has Smaller Diameter Cylinder Openings To Improve Location Of Combustion Seal Ring{1101,1201}
1979/08/13
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel{1217,1201,0663}
1979/10/01
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D353C :

CYLINDER BLOCK ASSEMBLY
5S-5098 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
5S-5098 CYLINDER BLOCK ASSEMBLY
ENGINE MOUNTING GROUP
8N-9566 ENGINE MOUNTING GROUP
CYL HEAD A
7N-3630 CYL HEAD A
7N-4013 CYLINDER BLOCK GP
CYLINDER BLOCK ASSEMBLY
4M-7000 CYLINDER BLOCK ASSEMBLY
BLOCK GP
7N-3041 BLOCK GP
BLOCK GP
7N-3041 BLOCK GP
CYLINDER BLOCK ASSEMBLY
7N-2053 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
7N-1497 CYLINDER BLOCK AS
PAN GP-OIL
2L-3512 PAN GP-OIL
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT GP
7L-5468 CRANKSHAFT GP
CRANKSHAFT GP
7L-5468 CRANKSHAFT GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.