FINAL DRIVE--Lower Half Part 2 of 2 Serial No. 66A5827 to 66A6154 inclusive Note: Quantities shown are those required for both R.H. and L.H. sides 3P5718 Snow and Mud Sprocket Segment Group, consisting of: 9--3P5717 Segment is available D9G

POWER TRAIN

DRIVE GP-FINAL

0. FINAL DRIV
1. FINAL DRIV
2. FINAL DRIV

UNDERCARRIAGE

IDLER GP

3. FRONT IDLE
4. FRONT IDLE
5. FRONT IDLE
6. FRONT IDLE
7. 4M-3835 FRONT IDLE
8. 4M-3835 FRONT IDLE
9. 4M-3835 FRONT IDLE
0. INFORMATION

TRACK-TYPE TRACTOR D9G TRACK-TYPE TRACTOR 66A
D9G TRACTOR / POWER SHIFT / 66A03266-09417 (MACHINE) UE036156 D9G 66A (1961)

POWER TRAIN

DRIVE GP-FINAL

FINAL DRIVE

#UE0361560330

FINAL DRIVE

FINAL DRIVE--Lower Half Part 2 of 2
Serial No. 66A5827 to 66A6154 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
3P5718 Snow and Mud Sprocket Segment Group, consisting of: 9--3P5717 Segment is available

c138803 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-2961	[6]	GEAR (24 TEETH)
2M-5588	[2]	GEAR (86 TEETH)
2M-4550	[12]	PLATE
9M-5895	[6]	ROLLER GROUP
0S-0484	[40]	BOLT
1B-4205	[40]	NUT
2A-4465	[40]	LOCK
2M-4454	[40]	PLATE
3B-8927	[2]	DOWEL
2M-2062 R	[2]	HUB
0L-1026	[2]	PLUG
3F-1953	[2]	DOWEL
2M-1131	[2]	INNER RACE AND ROLLER ASSEM.
2M-1149	[2]	RACE (OUTER)
8M-3393	[16]	BOLT
8M-3830	[16]	WASHER
8M-2882	[8]	LOCK
4F-7387	[2]	SEAL
2M-0504	[2]	SHAFT
2M-1131	[2]	INNER RACE AND ROLLER ASSEM.
2M-1149	[2]	RACE (OUTER)
1A-8063	[6]	BOLT
1D-4625	[12]	BOLT
2M-4551	[6]	DOWEL
		(1/2 OF EACH IN EACH HUB ASSEM. 2M5718)
2M-4483	[6]	LOCK
2M-5718	[2]	HUB ASSEM.
2M-2962	[2]	GEAR (75 TEETH)
6H-1717	[48]	BOLT
2A-4465	[24]	LOCK
2M-8766	[24]	PLATE
2A-1538	[66]	BOLT
3B-4512	[66]	LOCKWASHER
3S-7455	[1]	CASE (RIGHT HAND)
3S-7456	[1]	CASE (LEFT HAND)
1S-0429	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
2M-4478	[2]	RETAINER
0L-1026	[2]	PLUG
2M-2105	[6]	HUB
5M-7372	[4]	GUARD
5M-7373	[4]	GUARD
		(2 IN EACH HUB ASSEM. 3S7458)
5M-7294	[4]	SEAL GROUP
4M-0736	[8]	SEAL
		(2 IN EACH SEAL GROUP 5M7294)
4M-4823	[32]	RIVET
		(16 IN EACH HUB ASSEM. 3S7458)
0S-0509	[36]	BOLT
3B-4506	[36]	LOCKWASHER
7S-1579	[2]	NUT
7S-7646	[2]	LOCK
3S-7454	[2]	SUPPORT
2K-2834	[2]	KEY
2M-2150	[2]	NUT
2M-4450	[2]	LOCK
1B-3942	[2]	CUP
4M-2552	[2]	CONE
5F-2465	[2]	CUP
7M-5334	[2]	CONE
2B-7558	[4]	CORK
3F-5920	[2]	CUP
4M-1552	[2]	CONE
0S-0509	[8]	BOLT
0L-0364	[8]	LOCK
2M-1126	[2]	SEAL
2M-1129	[2]	CAP
2M-2941	[2]	NUT
2M-4470	[2]	LOCK
1A-1135	[16]	BOLT
3B-4510	[16]	LOCKWASHER
0S-0509	[8]	BOLT
7S-1581	[4]	LOCK
2M-1156	[2]	INNER RACE AND ROLLER ASSEM.
2M-1157	[2]	RACE (OUTER)
2M-4488	[2]	WASHER
7S-6104 C	[2]	GEAR (27 TEETH)
3S-7459	[2]	SPROCKET GROUP
3S-7458	[1]	HUB ASSEM.
3S-7461	[27]	BOLT
2M-5656	[27]	NUT
5S-0055	[1]	SEGMENT GROUP
3S-7460	[9]	SEGMENT
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#UE0361560331

FINAL DRIVE

FINAL DRIVE--Upper Half Part 1 of 2
Effective with Serial No. 66A6155
Note: Quantities shown are those required for both R.H. and L.H. sides

c127259 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8H-4129	[2]	NUT
9F-8216	[2]	GASKET
2M-6984	[2]	DRUM
9H-6864	[32]	BOLT
3B-4510	[32]	LOCKWASHER
2B-1459	[2]	PLUG
6H-0993	[2]	LOCK
0S-1589	[12]	BOLT
2S-7593	[12]	WASHER
1H-0525	[2]	DOWEL
9F-8072	[2]	OUTER RACE AND ROLLER ASSEM.
3S-7307	[2]	CAGE
		USE 7M7260 GASKET SOLUTION
9F-8073	[2]	RACE
4S-5001	[2]	SEAL GROUP
3S-4672	[4]	RING
		(2 IN EACH SEAL GROUP 4S5001)
3S-7305	[2]	FLANGE
0L-1026	[2]	PLUG
8M-3735	[2]	DOWEL
4M-1653	[2]	DOWEL
2M-8838	[2]	RACE
1M-3041	[2]	OUTER RACE AND ROLLER ASSEM.
2M-5589	[2]	PINION (18 TEETH)

#UE0361560332

FINAL DRIVE

FINAL DRIVE--Lower Half Part 2 of 2
Effective with Serial No. 66A6155
Note: Quantities shown are those required for both R.H. and L.H. sides
3P5718 Mud and Snow Sprocket Segment Group, consisting of: 9--3P5717 Segment is available

c138804 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-2961	[6]	GEAR (24 TEETH)
2M-5588	[2]	GEAR (86 TEETH)
2M-4550	[12]	PLATE
9M-5895	[6]	ROLLER GROUP
0S-0484	[40]	BOLT
1B-4205	[40]	NUT
2A-4465	[40]	LOCK
2M-4454	[40]	PLATE
3B-8927	[2]	DOWEL
2M-2062 R	[2]	HUB
0L-1026	[2]	PLUG
3F-1953	[2]	DOWEL
2M-1131	[2]	INNER RACE AND ROLLER ASSEM.
2M-1148	[2]	RACE (OUTER)
8M-3393	[16]	BOLT
8M-3830	[16]	WASHER
8M-2882	[8]	LOCK
2M-0504	[2]	SHAFT
4F-7387	[2]	SEAL
2M-1131	[2]	INNER RACE AND ROLLER ASSEM.
2M-1149	[2]	RACE (OUTER)
1A-8063	[6]	BOLT
1D-4625	[12]	BOLT
2M-4551	[6]	DOWEL
		(1/2 OF EACH IN EACH HUB ASSEM. 2M5718)
2M-4483	[6]	LOCK
2M-5718	[2]	HUB ASSEM.
2P-1554 C	[2]	GEAR (75 TEETH)
6H-1717	[48]	BOLT
2A-4465	[24]	LOCK
2M-8766	[24]	PLATE
2A-1538	[66]	BOLT
2S-0115	[66]	WASHER
3S-7455	[1]	CASE (RIGHT HAND)
3S-7456	[1]	CASE (LEFT HAND)
7S-7975	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
2M-4478	[2]	RETAINER
0L-1026	[2]	PLUG
2M-2105	[6]	HUB
5M-7372	[4]	GUARD
5M-7373	[4]	GUARD
		(2 IN EACH HUB ASSEM. 2P282)
5M-7294	[4]	SEAL GROUP
4M-0736	[8]	SEAL
		(2 IN EACH SEAL GROUP 5M7294)
4M-4823	[32]	RIVET
		(16 IN EACH HUB ASSEM. 2P282)
0S-0509	[36]	BOLT
3B-4506	[36]	LOCKWASHER
7S-1579	[2]	NUT
7S-7646	[2]	LOCK
3S-7454	[2]	SUPPORT
2K-2834	[2]	KEY
2M-2150	[2]	NUT
2M-4450	[2]	LOCK
1B-3942	[2]	CUP
4M-2552	[2]	CONE
5F-2465	[2]	CUP
7M-5334	[2]	CONE
2B-7558	[4]	CORK
3F-5920	[2]	CUP
4M-1552	[2]	CONE
0S-0509	[8]	BOLT
0L-0364	[8]	LOCK
2M-1126	[2]	SEAL
2M-1129	[2]	CAP
2M-2941	[2]	NUT
2M-4470	[2]	LOCK
1A-1135	[16]	BOLT
3B-4510	[16]	LOCKWASHER
0S-0509	[8]	BOLT
7S-1581	[4]	LOCK
2M-1156	[2]	INNER RACE AND ROLLER ASSEM.
2M-1157	[2]	RACE (OUTER)
2M-4488	[2]	WASHER
7S-6104	[2]	GEAR (27 TEETH)
8S-3004 C	[2]	SPROCKET GROUP
2P-0282	[1]	HUB ASSEM.
9S-2728	[27]	BOLT
2M-5656	[27]	NUT
5S-0055	[1]	SEGMENT GROUP
		(CONSISTS OF 9 SEGMENTS)
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#UE0361560333

FRONT IDLER

FRONT IDLER--Part 1 of 2
Serial No. 66A3266 to 66A7862 inclusive

c110549 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 2S5929)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
0S-1575	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
5S-1532	[2]	IDLER ASSEM.
4M-1605	[2]	YOKE ASSEM.
2S-5929	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM.
4B-1398	[12]	PLATE
1A-8063	[8]	BOLT
3B-4512	[12]	LOCKWASHER
4B-4283	[8]	WASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
1H-6382	[4]	PIN
1B-4432	[4]	NUT
3B-4508	[4]	LOCKWASHER
9S-1322	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP

#UE0361560334

FRONT IDLER

FRONT IDLER--Part 2 of 2
Serial No. 66A3266 to 66A7862 inclusive

c102168 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-6085	[2]	SPRING (OUTER)
8H-1350	[2]	PLATE
5H-6729	[2]	BOLT
0S-1624	[2]	BOLT
0L-0695	[2]	WASHER
8H-3390	[2]	NUT
5M-6666	[2]	RACE
5H-6730	[2]	SPRING (INNER)
5H-6727	[2]	PIPE ASSEM.
1M-0142	[4]	BUSHING (INNER)
		(1 IN EACH BUSHING ASSEM. 8H5634)
2H-3935	[4]	SEAL
1A-1460	[24]	BOLT
8H-5644	[12]	LOCK
2H-3931	[4]	SEAL
9H-6981	[2]	BEARING
		(R.H. OUTER - L.H. INNER)
2S-1731	[2]	PLUG
4M-2623	[2]	GUIDE
		(R.H. OUTER - L.H. INNER)
5M-1667	[2]	SHAFT
2M-3510	[64]	SHIM
1M-8748 R	[4]	SEAL GROUP
6H-1309	[8]	SEAL (RUBBER)
		(2 IN EACH SEAL GROUP 1M8748)
8H-5634	[4]	BUSHING ASSEM.
9B-2289	[8]	PIN
		(2 IN EACH BUSHING ASSEM. 8H5634)
5S-1537	[2]	GUIDE ASSEM.
		(R.H. OUTER - L.H. INNER)
6H-6270	[4]	RING
5H-6732	[2]	COVER
5H-6733	[2]	SEAL
0S-1594	[12]	BOLT
3B-4506	[12]	LOCKWASHER
5M-3374	[2]	SEAL
5M-3373	[2]	RING
2D-0830	[2]	RING
4M-4932	[2]	PISTON
2S-5865	[2]	PACKING
8H-5497	[2]	WASHER
5H-6740	[2]	BUSHING
2K-5965	[2]	RING
		(1 OF EACH IN EACH COVER ASSEM. 2M6914)
5H-6731	[2]	PLUG
5M-4454	[2]	SEAL
2M-6914	[2]	COVER ASSEM.
2M-6074	[2]	PILOT
1D-4612	[8]	BOLT
3B-4512	[8]	LOCKWASHER
2M-3509	[28]	SHIM
9H-6982	[2]	BEARING
		(R.H. INNER-L.H. OUTER)
4M-2624	[2]	GUIDE
		(R.H. INNER-L.H. OUTER)
9H-2036	[4]	PLATE ASSEM.
9H-0372	[12]	PIN
		(3 IN EACH PLATE ASSEM. 9H2036)
5M-0519	[4]	STRIP
		(1 IN EACH GUIDE ASSEM. 5S1537 AND 5S1538)
5S-1538	[2]	GUIDE ASSEM.
		(RH INNER-L.H. OUTER)
R		REMFG PART MAY BE AVAILABLE

#UE0361560335

FRONT IDLER

FRONT IDLER--Part 1 of 2
Serial No. 66A7863 to 66A8245 inclusive

c110550 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 2S5929)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
0S-1575	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
9S-1613 C	[1]	GUARD (RIGHT HAND)
9S-1614 C	[1]	GUARD (LEFT HAND)
5S-1532	[2]	IDLER ASSEM
4M-1605	[2]	YOKE ASSEM
2S-5929	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM.
4B-1398	[12]	PLATE
3B-2968 C	[8]	BOLT
3B-4512	[12]	LOCKWASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
1H-6382	[4]	PIN
1B-4432	[4]	NUT
3B-4508	[4]	LOCKWASHER
9S-1322	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP
C		INDICATES CHANGE FROM PREVIOUS

#UE0361560336

FRONT IDLER

FRONT IDLER--Part 2 of 2
Serial No. 66A7863 to 66A8245 inclusive

c127964 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-6085	[2]	SPRING (OUTER)
8H-1350	[2]	PLATE
5H-6729	[2]	BOLT
0S-1624	[2]	BOLT
0L-0695	[2]	WASHER
8H-3390	[2]	NUT
5M-6666	[2]	RACE
5H-6730	[2]	SPRING (INNER)
5H-6727	[2]	PIPE ASSEM.
1M-0142	[4]	BUSHING (INNER)
		(1 IN EACH BUSHING ASSEM. 8H5634)
2H-3935	[4]	SEAL
1A-1460	[24]	BOLT
8H-5644	[12]	LOCK
2H-3931	[4]	SEAL
9H-6981	[2]	BEARING
		(R.H. OUTER - L.H. INNER)
2S-1731	[2]	PLUG
4M-2623	[2]	GUIDE
		(R.H. OUTER-L.H. INNER)
5M-1667	[2]	SHAFT
9S-1612 C	[128]	SHIM
1M-8748 R	[4]	SEAL GROUP
6H-1309	[8]	SEAL (RUBBER)
		(2 IN EACH SEAL GROUP 1M8748)
8H-5634	[4]	BUSHING ASSEM.
9B-2289	[8]	PIN
		(2 IN EACH BUSHING ASSEM. 8H5634)
9S-1617 C	[2]	GUIDE ASSEM.
		(R.H. OUTER - L.H. INNER)
5H-6732	[2]	COVER
5H-6733	[2]	SEAL
0S-1594	[12]	BOLT
3B-4506	[12]	LOCKWASHER
5M-3374	[2]	SEAL
5M-3373	[2]	RING
2D-0830	[2]	RING
4M-4932	[2]	PISTON
2S-5865	[2]	PACKING
8H-5497	[2]	WASHER
5H-6740	[2]	BUSHING
2K-5965	[2]	RING
		(1 OF EACH IN EACH COVER ASSEM. 2M6914)
5H-6731	[2]	PLUG
5M-4454	[2]	SEAL
2M-6914	[2]	COVER ASSEM.
2M-6074	[2]	PILOT
1D-4612	[8]	BOLT
3B-4512	[8]	LOCKWASHER
2M-3509	[28]	SHIM
9H-6982	[2]	BEARING
		(R.H. INNER-L.H. OUTER)
4M-2624	[2]	GUIDE
		(R.H. INNER-L.H. OUTER)
9H-2036	[4]	PLATE ASSEM.
9H-0372	[12]	PIN
		(3 IN EACH PLATE ASSEM. 9H2036)
5M-0519	[4]	STRIP
		(1 IN EACH GUIDE ASSEM. 9S1617 AND 9S1618
9S-1618 C	[2]	GUIDE ASSEM.
		(R.H. INNER-L.H. OUTER)
C		INDICATES CHANGE FROM PREVIOUS
R		REMFG PART MAY BE AVAILABLE

#UE0361560337

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 1 of 2
Serial No. 66A8246 to 66A9252 inclusive

c110551 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 2S5929)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
0S-1575	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
9S-1613	[1]	GUARD (RIGHT HAND)
9S-1614	[1]	GUARD (LEFT HAND)
5S-1532	[2]	IDLER ASSEM
4M-1605	[2]	YOKE ASSEM
2S-5929	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM.
4B-1398	[12]	PLATE
3B-2968	[8]	BOLT
3B-4512	[12]	LOCKWASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
1B-2886	[4]	BOLT
3B-4508	[4]	LOCKWASHER
1S-3513	[4]	LOCK
9S-1322	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP

#UE0361560338

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 2 of 2
Serial No. 66A8246 to 66A9252 inclusive

c158206 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2M-6085	[2]	SPRING (OUTER)
8H-1350	[2]	PLATE
9S-8218 C	[2]	BOLT
0S-1624	[2]	BOLT
0L-0695	[2]	WASHER
9S-8216 C	[2]	NUT
5M-6666	[2]	RACE
5H-6730	[2]	SPRING (INNER)
5H-6727	[2]	PIPE ASSEM.
1M-0142	[4]	BUSHING (INNER)
		(1 IN EACH BUSHING ASSEM. 8H5634)
2H-3935	[4]	SEAL
1A-1460	[24]	BOLT
3B-4508	[24]	LOCKWASHER
2H-3931	[4]	SEAL
1S-3511 C	[2]	BEARING
		R.H. INNER-L.H. OUTER)
2S-1731	[2]	PLUG
4M-2623	[2]	GUIDE
		(R.H. INNER-L.H. OUTER)
1S-3514 C	[2]	SHAFT
9S-1612	[128]	SHIM
1M-8748 R	[4]	SEAL GROUP
6H-1309	[8]	SEAL (RUBBER)
		(2 IN EACH SEAL GROUP 1M8748)
8H-5634	[4]	BUSHING ASSEM.
9B-2289	[8]	PIN
		(2 IN EACH BUSHING ASSEM. 8H5634)
9S-1617	[2]	GUIDE ASSEM.
		(R.H. OUTER-L.H. INNER)
6H-6270	[4]	RING
5H-6732	[2]	COVER
5H-6733	[2]	SEAL
0S-1594	[12]	BOLT
3B-4506	[12]	LOCKWASHER
5M-3374	[2]	SEAL
5M-3373	[2]	RING
2D-0830	[2]	RING
4M-4932	[2]	PISTON
1P-4880	[2]	SEAL
1P-3358 C	[2]	BEARING
2K-5965	[2]	RING
		(1 OF EACH IN EACH COVER ASSEM. 2M6914)
5H-6731	[2]	PLUG
5M-4454	[2]	SEAL
2M-6914	[2]	COVER ASSEM.
2M-6074	[2]	PILOT
7F-5227 C	[8]	BOLT
3B-4512	[8]	LOCKWASHER
2M-3509	[28]	SHIM
1S-3512 C	[2]	BEARING
		(R.H. OUTER-L.H. INNER)
4M-2624	[2]	GUIDE
		(R.H. OUTER-L.H. INNER)
9H-2036	[4]	PLATE ASSEM
9H-0372	[12]	PIN
		(3 IN EACH PLATE ASSEM. 9H2036)
5M-0519	[4]	STRIP
		(1 IN EACH GUIDE ASSEM 9S1617 AND 9S1618
9S-1618	[2]	GUIDE ASSEM
		(RH INNER - L.H. OUTER)
C		INDICATES CHANGE FROM PREVIOUS
R		REMFG PART MAY BE AVAILABLE

#UE0361560339

4M-3835: FRONT IDLER

FRONT IDLER

FRONT IDLER (4M3835 N/S)--Part 1 of 2
Effective with Serial No. 66A9253

c110551 UE036156

For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-5242	[2]	PLATE
7B-3028	[8]	SCREW
2S-5927	[2]	PLATE
7B-3028	[8]	SCREW
		(1/2 OF EACH IN EACH ROD GROUP 2S5929)
2S-5926	[2]	VALVE
5M-6708	[2]	WASHER
2S-5925	[2]	VALVE
5M-6708	[2]	WASHER
1D-4625	[16]	BOLT
3B-4514	[16]	LOCKWASHER
5M-7701	[2]	CYLINDER
0S-1575	[12]	BOLT
1B-4207	[12]	NUT
3B-4512	[12]	LOCKWASHER
9S-1613	[1]	GUARD (RIGHT HAND)
9S-1614	[1]	GUARD (LEFT HAND)
5S-1532	[2]	IDLER ASSEM
4M-1605	[2]	YOKE ASSEM
2S-5929	[2]	ROD GROUP
1D-4635	[2]	BOLT
5H-6737	[2]	WASHER
4F-5003	[12]	SPRING ASSEM.
4B-1398	[12]	PLATE
3B-2968	[8]	BOLT
3B-4512	[12]	LOCKWASHER
1D-4609	[4]	BOLT
1H-8501	[4]	SPACER
1J-6775	[8]	BOLT
3B-4520	[8]	LOCKWASHER
1B-2886	[4]	BOLT
3B-4508	[4]	LOCKWASHER
1S-3513	[4]	LOCK
9S-1322	[16]	BOLT
3B-4514	[16]	LOCKWASHER
4M-5023	[8]	STRIP

Information:

POWER TRAIN

DRIVE GP-FINAL

Special Instruction

Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}

Installation Of 8P7639 Planet Gears{4050}
Installation Of 8P7639 Planet Gears{4050}

Installation Of 3T9446 Final Drive Lubrication Reservoir{4050}
Installation Of 3T9446 Final Drive Lubrication Reservoir{4050}

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Caterpillar Track Type Tractor (D9 - D11) Technician Checklist<BR>Final Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}
Caterpillar Track Type Tractor (D9 - D11) Technician Checklist
Final Drive, Steering Clutch, and Brake Removal and Installation{0372, 0374, 4050, 4050, 4101, 4101, 4251, 4251}

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}

Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}

Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}

Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Magazine

Improved Final Drive Lubrication Reservoir Assembly{4050,4070}
1982/06/14

New Bearing Used For Planet Gear In Final Drive Group-Revision Of Article With The Same Title In The Service Magazine July 12, 1976, Page 11{4050}
1977/08/08

Magnetic Plug Gives A Visual Indication Of Possible Final Drive Damage{4059}
1978/09/25

Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D9G :

FINAL DRIVE

FRONT IDLER

4M-3835 FRONT IDLER

Truck sale:

Caterpillar D9G
- Crawler dozers
HOLT CAT

Caterpillar D9G, Crawler dozers, Construction
- Crawler dozers
WILLIAM ADAMS PTY. LTD.

26.828

Caterpillar D9G, Bulldozer, Bau-Und Bergbauausrüstung

USD $14,900

1971 CAT D9G

Binkley Equipment
Rochester, Minnesota

Call

1970 CAT D9G

Auto Express
RICH CREEK, Virginia