FINAL DRIVE--Upper Half--Part 1 of 2 Serial No. 36A4469 to 36A4648 inclusive Note: Quantities shown are those required for both R.H. and L.H. sides Refer also to Page 148B for special parts D8H

POWER TRAIN

DRIVE GP-FINAL

0. FINAL DRIV
1. FINAL DRIV
2. FINAL DRIV
3. FINAL DRIV
4. FINAL DRIV
5. FINAL DRIV
6. FINAL DRIV
7. FINAL DRIV
8. FINAL DRIV
9. FINAL DRIV
0. INFORMATION

TRACK-TYPE TRACTOR D8H TRACK-TYPE TRACTOR 36A
D8 TRACTOR / DIRECT DRIVE / 36A04469-05328 (MACHINE) UE036169 D8H 36A (1958)

POWER TRAIN

DRIVE GP-FINAL

FINAL DRIVE LUBRICATION SYSTEM

8H-3825 OIL SYSTEM GP-FINAL DRIVE

FINAL DRIVE

#UE0361690270

FINAL DRIVE

FINAL DRIVE--Upper Half--Part 1 of 2
Serial No. 36A4469 to 36A4648 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
Refer also to Page 148B for special parts

c87958 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-6864	[24]	BOLT
3B-4510	[24]	LOCKWASHER
8H-1053	[2]	FLANGE
8H-2521	[2]	GASKET
7B-3235	[14]	BOLT
3B-4508	[14]	LOCKWASHER
3F-1953	[2]	DOWEL
8B-4455	[2]	OUTER RACE AND ROLLER ASSEM.
8B-4454	[2]	RACE (INNER)
8H-2434	[2]	DRUM
5M-5016	[2]	NUT
8H-1105	[2]	LOCK
1M-0380	[2]	GASKET
0S-1620	[2]	BOLT
1S-8816	[2]	SEAL
8H-1234	[2]	CAGE
4M-0680	[2]	GASKET
4H-0254	[2]	DOWEL
4M-0679	[2]	CAGE
9F-8073	[2]	RACE (INNER)
9F-8072	[2]	OUTER RACE AND ROLLER ASSEM.
8H-3375	[2]	GASKET
0L-1026	[2]	PLUG
4H-6534	[2]	DOWEL
1A-1135	[60]	BOLT
3B-4510	[60]	LOCKWASHER
2D-6421	[2]	OUTER RACE AND ROLLER ASSEM.
1M-1604	[2]	RACE (INNER)
8H-1034	[2]	PINION (12 TEETH)
8M-0325	[1]	CASE (RIGHT HAND)
8M-0326	[1]	CASE (LEFT HAND)
2A-0309	[6]	DOWEL (2" LONG)
0L-1026	[2]	PLUG
1H-0525	[2]	DOWEL
9F-8089	[2]	RACE (INNER)
9F-8074	[2]	OUTER RACE AND ROLLER ASSEM.
0S-1585	[16]	BOLT
4M-0706	[8]	LOCK
4M-0602	[2]	PINION
		(45 AND 12 TEETH)

#UE0361690271

FINAL DRIVE

FINAL DRIVE--Lower Half--Part 2 of 2
Serial No. 36A4469 to 36A4648 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides

c94410 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-5093	[2]	GEAR (55 TEETH)
9F-7975	[4]	GUARD
0S-0509	[56]	BOLT
3B-4506	[56]	LOCKWASHER
4M-0656	[4]	RETAINER
4M-0661	[4]	SEAL
4M-0660	[8]	RING
		(2 IN EACH SEAL GROUP 5M1177)
7M-5123	[12]	PIN
		(3 IN EACH RETAINER ASSEM. 4M658)
4M-0658	[4]	RETAINER ASSEM.
5M-1177 R	[4]	SEAL GROUP
1M-9015	[4]	SEAL
8H-0992	[2]	TRUNNION
0L-1026	[2]	PLUG
8H-1130	[2]	DOWEL
8H-2046	[2]	RING
8M-3392	[12]	BOLT
8M-2881	[6]	LOCK
8M-3832	[12]	WASHER
8H-6812	[2]	SHAFT ASSEM.
8H-2435	[2]	RING
8H-0891	[2]	INNER RACE AND ROLLER ASSEM.
8H-0892	[2]	RACE (OUTER)
8M-3392	[16]	BOLT
8H-1310	[8]	LOCK
8M-3832	[16]	WASHER
9H-5094 R	[2]	HUB
0S-1601	[24]	BOLT
1B-4206	[24]	NUT
2A-4462	[24]	LOCK
9F-7960	[24]	PLATE
2K-0744	[2]	PLUG
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
4B-4342	[28]	RIVET
		(14 IN EACH SPROCKET GROUP 3S6068 AND SPROCKET ASSEM. 8M5669)
9F-7978	[4]	GUARD
		(2 IN EACH SPROCKET GROUP 3S6068 AND SPROCKET ASSEM. 8M5669)
1S-0877	[2]	GUARD
2A-0197	[6]	PIN (2.3125" LONG)
		(3 IN EACH SPROCKET GROUP 3S6068)
7M-5130	[12]	PIN
		(6 IN EACH SPROCKET ASSEM. 8M5669)
2S-2172	[2]	SUPPORT
1B-8743	[2]	KEY
8H-0922	[2]	SPACER
8H-0908	[2]	SPACER
8H-0931	[2]	SHIM
8F-9372	[20]	BOLT
3B-4508	[20]	LOCKWASHER
8H-0901	[6]	CUP
8H-0902	[6]	CONE
3S-6989	[2]	NUT
2S-1719	[2]	LOCK
8M-7999	[2]	CAGE
1B-8745	[2]	KEY
5M-5017	[2]	NUT
8H-0984	[2]	CAP
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
8H-0889	[2]	LOCK
0S-1614	[8]	BOLT
7F-2836	[8]	LOCK
2B-7557	[4]	CORK
8H-0871	[2]	SEAL
1M-0638	[2]	SPACER
		(1 IN EACH SHAFT ASSEM. 8H6812)
3S-6068	[2]	SPROCKET GROUP (STANDARD)
		NOTE: 1S8725 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM
		-OR-
8M-5669	[2]	SPROCKET ASSEM. (SNOW)
		NOTE: 1M3864 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM
R		REMFG PART MAY BE AVAILABLE

#UE0361690272

FINAL DRIVE

FINAL DRIVE--Upper Half--Part 1 of 2
Serial No. 36A4649 to 36A4749 inclusive. Refer also to Page 148D for special parts

c111181 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-6864	[24]	BOLT
3B-4510	[24]	LOCKWASHER
3S-7306	[2]	FLANGE
7B-3235	[14]	BOLT
2M-0849	[14]	WASHER
5S-4033	[2]	DOWEL
4S-9782	[2]	OUTER RACE AND ROLLER ASSEM.
4S-9783	[2]	RACE (INNER)
8H-2434	[2]	DRUM
5M-5016	[2]	NUT
8H-1105	[2]	LOCK
1M-0380	[2]	GASKET
1K-6705	[2]	BOLT
1P-7249	[2]	SEAL GROUP
1P-7239	[4]	RING
		(2 EACH IN SEAL GROUP 1P7249)
3S-7308	[2]	CAGE
3B-8852	[2]	DOWEL
9S-4829	[2]	RACE (INNER)
5S-0135	[2]	CAGE
3S-9669	[2]	OUTER RACE AND ROLLER ASSEM.
		USE GASKET SOLUTION 7M7260
0L-1026	[2]	PLUG
4H-6534	[2]	DOWEL
1A-1135	[60]	BOLT
2S-7593	[60]	WASHER
2D-6421	[2]	OUTER RACE AND ROLLER ASSEM.
1M-1604	[2]	RACE (INNER)
2S-4357	[2]	PINION (12 TEETH)
5S-0009	[1]	CASE (RIGHT HAND)
5S-0010	[1]	CASE (LEFT HAND)
2A-0309	[6]	DOWEL (2" LONG)
0L-1026	[2]	PLUG
4B-8265	[2]	DOWEL
9S-5360	[2]	RACE (INNER)
4S-9780	[2]	OUTER RACE AND ROLLER ASSEM.
0S-1585	[16]	BOLT
4M-0706	[8]	LOCK
5S-0136	[2]	PINION
		(45 AND 12 TEETH)

#UE0361690273

FINAL DRIVE

FINAL DRIVE--LOWER HALF--PART 2 OF 2
SERIAL NO. 36A4649 TO 36A4749 INCLUSIVE

c122479 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5S-0088	[2]	GEAR (55 TEETH)
9F-7975	[4]	GUARD
0S-0509	[56]	BOLT
3B-4506	[56]	LOCKWASHER
4M-0660	[8]	RING
		(2 EACH IN SEAL GROUP 5M1177)
5M-1177 R	[4]	SEAL GROUP
8H-0992	[2]	TRUNNION
0L-1026	[2]	PLUG
8H-1130	[2]	DOWEL
8H-2046	[2]	RING
8M-3392	[12]	BOLT
8M-2881	[6]	LOCK
8M-3832	[12]	WASHER
8H-6812	[2]	SHAFT ASSEM.
8H-2435	[2]	RING
4S-9326	[2]	INNER RACE AND ROLLER ASSEM.
4S-9325	[2]	RACE (OUTER)
8M-3392	[16]	BOLT
8M-3831	[8]	LOCK
8M-3832	[16]	WASHER
9H-5094 R	[2]	HUB
0S-1601	[24]	BOLT
1B-4206	[24]	NUT
2A-4462	[24]	LOCK
9F-7960	[24]	PLATE
2K-0744	[2]	PLUG
1S-0877	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
3S-7902	[2]	SUPPORT
1B-8743	[2]	KEY
8H-0922	[2]	SPACER
8H-0908	[2]	SPACER
8H-0931	[2]	SHIM
8F-9372	[20]	BOLT
3B-4508	[20]	LOCKWASHER
8H-0901	[6]	CUP
8H-0902	[6]	CONE
3S-6989	[2]	NUT
2S-1719	[2]	LOCK
8M-7999	[2]	CAGE
1B-8745	[2]	KEY
5M-5017	[2]	NUT
8H-0984	[2]	CAP
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
8H-0889	[2]	LOCK
0S-1614	[8]	BOLT
5S-1492	[4]	LOCK
2B-7557	[4]	CORK
8H-0871	[2]	SEAL
1M-0638	[2]	SPACER
		(1 IN EACH SHAFT ASSEM. 8H6812)
9F-7978	[4]	GUARD
4B-4342	[28]	RIVET
		(1/2 EACH IN HUB ASSEM. 3S7833)
3S-7834	[2]	SPROCKET GROUP
3S-7833	[1]	HUB ASSEM.
3S-7837	[27]	BOLT
7H-3609	[27]	NUT
5S-0054	[1]	SEGMENT GROUP
		(CONSISTING OF 9 SEGMENTS)
R		REMFG PART MAY BE AVAILABLE

#UE0361690274

FINAL DRIVE

FINAL DRIVE--Upper Half--Part 1 of 2
Serial No. 36A4750 to 36A5022 inclusive. Refer also to Page 148D for special parts

c111181 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-6864	[24]	BOLT
3B-4510	[24]	LOCKWASHER
3S-7306	[2]	FLANGE
7B-3235	[14]	BOLT
2M-0849	[14]	WASHER
5S-4033	[2]	DOWEL
4S-9782	[2]	OUTER RACE AND ROLLER ASSEM.
4S-9783	[2]	RACE (INNER)
8H-2434	[2]	DRUM
5M-5016	[2]	NUT
8H-1105	[2]	LOCK
1M-0380	[2]	GASKET
1K-6705	[2]	BOLT
1P-7249	[2]	SEAL GROUP
1P-7239	[4]	RING
		(2 EACH IN SEAL GROUP 1P7249)
3S-7308	[2]	CAGE
3B-8852	[2]	DOWEL
9S-4829	[2]	RACE (INNER)
5S-0135	[2]	CAGE
3S-9669	[2]	OUTER RACE AND ROLLER ASSEM.
		USE GASKET SOLUTION 7M7260
0L-1026	[2]	PLUG
4H-6534	[2]	DOWEL
1A-1135	[60]	BOLT
2S-7593	[60]	WASHER
2D-6421	[2]	OUTER RACE AND ROLLER ASSEM.
1M-1604	[2]	RACE (INNER)
2S-4357	[2]	PINION (12 TEETH)
5S-0009	[1]	CASE (RIGHT HAND)
5S-0010	[1]	CASE (LEFT HAND)
2A-0309	[6]	DOWEL (2" LONG)
0L-1026	[2]	PLUG
4B-8265	[2]	DOWEL
9S-5360	[2]	RACE (INNER)
4S-9780	[2]	OUTER RACE AND ROLLER ASSEM.
0S-1585	[16]	BOLT
4M-0706	[8]	LOCK
5S-0136	[2]	PINION
		(45 AND 12 TEETH)

#UE0361690275

FINAL DRIVE

FINAL DRIVE--Lower Half--Part 2 of 2
Serial No. 36A4750 to 36A5022 inclusive

c121972 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-5093	[2]	GEAR (55 TEETH)
9F-7975	[4]	GUARD
0S-0509	[56]	BOLT
3B-4506	[56]	LOCKWASHER
4M-0660	[8]	RING
		(2 EACH IN SEAL GROUP 5M1177)
5M-1177 R	[4]	SEAL GROUP
5S-6879	[2]	TRUNNION
6F-0542	[2]	SCREW
5S-6878	[2]	LOCK
8H-2046	[2]	RING
8M-3392	[12]	BOLT
8M-2881	[6]	LOCK
8M-3832	[12]	WASHER
8H-6812	[2]	SHAFT ASSEM.
8H-2435	[2]	RING
4S-9326	[2]	INNER RACE AND ROLLER ASSEM.
4S-9325	[2]	RACE (OUTER)
8M-3392	[16]	BOLT
8M-3831	[8]	LOCK
8M-3832	[16]	WASHER
9H-5094 R	[2]	HUB
0S-1601	[24]	BOLT
1B-4206	[24]	NUT
2A-4462	[24]	LOCK
9F-7960	[24]	PLATE
2K-0744	[2]	PLUG
7S-7974	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
3S-7902	[2]	SUPPORT
1B-8743	[2]	KEY
8H-0922	[2]	SPACER
8H-0908	[2]	SPACER
8H-0931	[2]	SHIM
8F-9372	[20]	BOLT
3B-4508	[20]	LOCKWASHER
8H-0901	[6]	CUP
8H-0902	[6]	CONE
3S-6989	[2]	NUT
5S-6921	[2]	LOCK
8M-7999	[2]	CAGE
1B-8745	[2]	KEY
5M-5017	[2]	NUT
8H-0984	[2]	CAP
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
8H-0889	[2]	LOCK
0S-1614	[8]	BOLT
5S-1492	[4]	LOCK
2B-7557	[4]	CORK
8H-0871	[2]	SEAL
1M-0638	[2]	SPACER
		(1 IN EACH SHAFT ASSEM. 8H6812)
9F-7978	[4]	GUARD
4B-4342	[28]	RIVET
		(1/2 EACH IN HUB ASSEM. 3S7833)
3S-7834	[2]	SPROCKET GROUP
3S-7833	[1]	HUB ASSEM.
3S-7837	[27]	BOLT
7H-3609	[27]	NUT
5S-0054	[1]	SEGMENT GROUP
		(CONSISTS OF 9 SEGMENTS)
R		REMFG PART MAY BE AVAILABLE

#UE0361690276

FINAL DRIVE

FINAL DRIVE--Upper Half--Part 1 of 2
Serial No. 36A5023 to 36A5031 inclusive. Refer also to Page 148D for special parts

c111181 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-6864	[24]	BOLT
3B-4510	[24]	LOCKWASHER
3S-7306	[2]	FLANGE
7B-3235	[14]	BOLT
2M-0849	[14]	WASHER
5S-4033	[2]	DOWEL
4S-9782	[2]	OUTER RACE AND ROLLER ASSEM.
4S-9783	[2]	RACE (INNER)
8H-2434	[2]	DRUM
5M-5016	[2]	NUT
8H-1105	[2]	LOCK
1M-0380	[2]	GASKET
1K-6705	[2]	BOLT
1P-7249	[2]	SEAL GROUP
1P-7239	[4]	RING
		(2 EACH IN SEAL GROUP 1P7249)
3S-7308	[2]	CAGE
3B-8852	[2]	DOWEL
9S-4829	[2]	RACE (INNER)
5S-0135	[2]	CAGE
3S-9669	[2]	OUTER RACE AND ROLLER ASSEM.
		USE GASKET SOLUTION 7M7260
0L-1026	[2]	PLUG
4H-6534	[2]	DOWEL
1A-1135	[60]	BOLT
2S-7593	[60]	WASHER
2D-6421	[2]	OUTER RACE AND ROLLER ASSEM.
1M-1604	[2]	RACE (INNER)
2S-4357	[2]	PINION (12 TEETH)
5S-0009	[1]	CASE (RIGHT HAND)
5S-0010	[1]	CASE (LEFT HAND)
2A-0309	[6]	DOWEL (2" LONG)
0L-1026	[2]	PLUG
4B-8265	[2]	DOWEL
9S-5360	[2]	RACE (INNER)
4S-9780	[2]	OUTER RACE AND ROLLER ASSEM.
0S-1585	[16]	BOLT
4M-0706	[8]	LOCK
5S-0136	[2]	PINION
		(45 AND 12 TEETH)

#UE0361690277

FINAL DRIVE

FINAL DRIVE--Lower Half--Part 2 of 2
Serial No. 36A5023 to 36A5031 inclusive

c124164 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-5093	[2]	GEAR (55 TEETH)
9F-7975	[4]	GUARD
0S-0509	[56]	BOLT
3B-4506	[56]	LOCKWASHER
4M-0660	[8]	RING
		(2 EACH IN SEAL GROUP 5M1177)
5M-1177 R	[4]	SEAL GROUP
5S-6879	[2]	TRUNNION
6F-0542	[2]	SCREW
5S-6878	[2]	LOCK
8H-2046	[2]	RING
8M-3392	[12]	BOLT
8M-2881	[6]	LOCK
8M-3832	[12]	WASHER
8H-6812	[2]	SHAFT ASSEM.
8H-2435	[2]	RING
4S-9326	[2]	INNER RACE AND ROLLER ASSEM.
4S-9325	[2]	RACE (OUTER)
8M-3392	[16]	BOLT
8M-3831	[8]	LOCK
8M-3832	[16]	WASHER
9H-5094 R	[2]	HUB
0S-1601	[24]	BOLT
1B-4206	[24]	NUT
2A-4462	[24]	LOCK
9F-7960	[24]	PLATE
2K-0744	[2]	PLUG
7S-7974	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
3S-7902	[2]	SUPPORT
1B-8743	[2]	KEY
8H-0922	[2]	SPACER
8H-0908	[2]	SPACER
8H-0931	[2]	SHIM
8F-9372	[20]	BOLT
3B-4508	[20]	LOCKWASHER
8H-0901	[6]	CUP
8H-0902	[6]	CONE
3S-6989	[2]	NUT
5S-6921	[2]	LOCK
8M-7999	[2]	CAGE
1B-8745	[2]	KEY
5M-5017	[2]	NUT
8H-0984	[2]	CAP
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
8H-0889	[2]	LOCK
0S-1614	[8]	BOLT
5S-1492	[4]	LOCK
2B-7557	[4]	CORK
8H-0871	[2]	SEAL
1M-0638	[2]	SPACER
		(1 IN EACH SHAFT ASSEM. 8H6812)
9F-7978	[4]	GUARD
4B-4342	[28]	RIVET
		(1/2 EACH IN HUB ASSEM. 8S3018)
8S-3019	[2]	SPROCKET GROUP
8S-3018	[1]	HUB ASSEM.
9S-2727	[27]	BOLT
7H-3609	[27]	NUT
5S-0054	[1]	SEGMENT GROUP
		(CONSISTS OF 9 SEGMENTS)
R		REMFG PART MAY BE AVAILABLE

#UE0361690278

FINAL DRIVE

FINAL DRIVE--Upper Half--Part 1 of 2
Effective with Serial No. 36A5032. Refer also to Page 148D for special parts

c111181 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-6864	[24]	BOLT
3B-4510	[24]	LOCKWASHER
3S-7306	[2]	FLANGE
7B-3235	[14]	BOLT
2M-0849	[14]	WASHER
5S-4033	[2]	DOWEL
4S-9782	[2]	OUTER RACE AND ROLLER ASSEM.
4S-9783	[2]	RACE (INNER)
8H-2434	[2]	DRUM
5M-5016	[2]	NUT
8H-1105	[2]	LOCK
1M-0380	[2]	GASKET
1K-6705	[2]	BOLT
1P-7249	[2]	SEAL GROUP
1P-7239	[4]	RING
		(2 EACH IN SEAL GROUP 1P7249)
3S-7308	[2]	CAGE
3B-8852	[2]	DOWEL
9S-4829	[2]	RACE (INNER)
5S-0135	[2]	CAGE
3S-9669	[2]	OUTER RACE AND ROLLER ASSEM.
		USE GASKET SOLUTION 7M7260
0L-1026	[2]	PLUG
4H-6534	[2]	DOWEL
1A-1135	[60]	BOLT
2S-7593	[60]	WASHER
2D-6421	[2]	OUTER RACE AND ROLLER ASSEM.
1M-1604	[2]	RACE (INNER)
2S-4357	[2]	PINION (12 TEETH)
5S-0009	[1]	CASE (RIGHT HAND)
5S-0010	[1]	CASE (LEFT HAND)
2A-0309	[6]	DOWEL (2" LONG)
0L-1026	[2]	PLUG
4B-8265	[2]	DOWEL
9S-5360	[2]	RACE (INNER)
4S-9780	[2]	OUTER RACE AND ROLLER ASSEM.
0S-1585	[16]	BOLT
4M-0706	[8]	LOCK
5S-0136	[2]	PINION
		(45 AND 12 TEETH)

#UE0361690279

FINAL DRIVE

FINAL DRIVE--Lower Half--Part 2 of 2
Effective with Serial No. 36A5032

c124363 UE036169

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-5093	[2]	GEAR (55 Teeth)
9F-7975	[4]	GUARD
0S-0509	[56]	BOLT
3B-4506	[56]	LOCKWASHER
5M-1177 R	[4]	SEAL GROUP
4M-0660	[8]	RING
		(2 in each 5M1177 Seal Group)
6F-0542	[2]	SCREW
5S-6878	[2]	LOCK
8M-3393 C	[16]	BOLT
8S-1197 C	[8]	RETAINER
8H-2046	[2]	SEAL
8S-1194 C	[2]	SHAFT
2M-1131 C	[2]	INNER RACE AND ROLLER ASSEM.
2M-1149 C	[2]	RACE (Outer)
8S-1198 RC	[2]	HUB
0S-1601	[24]	BOLT
1B-4206	[24]	NUT
2A-4462	[24]	LOCK
9F-7960	[24]	PLATE
2K-0744	[2]	PLUG
7S-7974	[2]	GUARD
1S-0454	[12]	BOLT
3B-4514	[12]	LOCKWASHER
8S-2924 C	[2]	SUPPORT
1B-8743	[2]	KEY
8S-2126 C	[2]	SPACER
8S-2123 C	[2]	CAGE
8H-0908	[2]	SPACER
3S-6989	[2]	NUT
5S-6921	[2]	LOCK
0S-1587 C	[20]	BOLT
3B-4508	[20]	LOCKWASHER
8H-0901 C	[2]	CUP
8H-0902 C	[2]	CONE
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
8H-0889	[2]	LOCK
1B-8745	[2]	KEY
5M-5017	[2]	NUT
1M-0638 C	[2]	SPACER
8H-0984	[2]	CAP
0S-1614	[8]	BOLT
5S-1492	[4]	LOCK
8H-0871	[2]	SEAL
2B-7557	[4]	CORK
8H-0931	[2]	SHIM
8S-2125 C	[4]	CUP
8S-2127 C	[4]	CONE
4B-4342	[28]	RIVET
9F-7978	[4]	GUARD
		(1/2 each in 8S3018 Hub Assem.)
8S-3019	[2]	SPROCKET GROUP
8S-3018	[1]	HUB ASSEM.
9S-2727 C	[27]	BOLT
7H-3609	[27]	NUT
5S-0054	[1]	SEGMENT GROUP
C		INDICATES CHANGE FROM PREVIOUS
R		REMFG PART MAY BE AVAILABLE

Information:

POWER TRAIN

DRIVE GP-FINAL

Special Instruction

Using the 1U9696 Axle Test Group{4050, 4058}
Using the 1U9696 Axle Test Group{4050, 4058}

Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}

Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}

Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Magazine

Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D8H :

8H-3825 OIL SYSTEM GP-FINAL DRIVE

FINAL DRIVE LUBRICATION SYSTEM

2S-8408 VALVE GP-STEERING CLUTCH

9H-5365 STEERING CLUTCH HYDRAULIC CONTROL

FINAL DRIVE

Truck sale:

22,300 USD

Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.

26,000

Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.

CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo

CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064

Call

CAT D8H

Walker Machinery