AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

561 PIPELAYER 62A00205-00387 (MACHINE) UNDERCARRIAGE Caterpillar SIS



PIPELAYER 561B PIPELAYER 62A
 561 PIPELAYER 62A00205-00387 (MACHINE) UE036198 561B 62A   (1959)

Parts group 561B:

  For full view, you need register
UNDERCARRIAGE
IDLER GP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 62A205 to 62A224 inclusive
Note: Quantities shown are those required for both R.H. AND L.H. sides
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
2M3035 FRONT IDLER GROUP--Part 2 of 2
Serial No. 62A205 to 62A224 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 62A225 to 62A233 inclusive
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
2M3035 FRONT IDLER GROUP--Part 2 of 2
Serial No. 62A225 to 62A233 inclusive
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 62A234-Up
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
2M3035 FRONT IDLER GROUP--Part 2 of 2
Serial No. 62A234-Up
ROLLER GP
TRACK ROLLER FRAME GUARD
TRACK ROLLER FRAME GUARD
TRACK ROLLER FRAME GUARD
SERIAL NO. 62A205 TO 62A233 INCLUSIVE
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. AND L.H. SIDES
TRACK ROLLER FRAME GUARD
TRACK ROLLER FRAME GUARD
TRACK ROLLER FRAME GUARD
EFFECTIVE WITH SERIAL NO. 62A234
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. AND L.H. SIDES
TRACK ROLLER GROUP
1M-3827 TRACK ROLLER GROUP
1M3826 TRACK ROLLER GROUP--Single Flange--4 Groups Required
1M3827 TRACK ROLLER GROUP--Double Flange--8 Groups Required
TRACK CARRIER ROLLER GROUP
5M-8631 TRACK CARRIER ROLLER GROUP
5M8631 TRACK CARRIER ROLLER GROUP--4 REQUIRED
TRACK ROLLER DIRT GUARD GROUP
8B-2868 TRACK ROLLER DIRT GUARD GROUP
8B2868 TRACK ROLLER DIRT GUARD GROUP
Reinforced for extremely rough usage
TRACK GP
TRACK GROUP
2S-7586 TRACK GROUP
2S7586 TRACK GROUP--18" GROUSER SHOE--2 REQUIRED
SERIAL NO. 62A205 TO 62A282 INCLUSIVE
8M7476 TRACK PIN AND BUSHING GROUP, CONSISTING OF A COMPLETE SET
OF PINS AND BUSHINGS FOR ONE TRACK, IS AVAILABLE
REFER ALSO TO PAGES 141 AND 142 FOR SPECIAL PARTS
TRACK GROUP
4S-7945 TRACK GROUP
4S7945 TRACK GROUP--18" GROUSER SHOE--2 REQUIRED
EFFECTIVE WITH SERIAL NO. 62A283
8M7476 TRACK PIN AND BUSHING GROUP, CONSISTING OF A COMPLETE SET
OF PINS AND BUSHINGS FOR ONE TRACK, IS AVAILABLE
REFER ALSO TO PAGES 141 AND 142 FOR SPECIAL PARTS
TRACK GROUP
5S-0827 TRACK GROUP
5S827 TRACK GROUP--16" GROUSER SHOE--2 REQUIRED
FOR USE WITH 6.906 INCH PITCH SPROCKET
NOTE: 7S6160 TRACK PIN AND BUSHING GROUP, CONSISTING OF A
COMPLETE SET OF PINS AND BUSHINGS FOR ONE TRACK, IS AVAILABLE
TRACK GROUPS
TRACK GROUPS
TRACK GROUPS--2 Groups Required
STREET PLATE GROUP
8B-3146 STREET PLATE GROUP
8B3146 STREET PLATE GROUP--Alternate Shoe
4F2258 STREET PLATE GROUP--Full Set

Information:

(For parts list, see above)

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Service Magazine
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Service Magazine
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Service Magazine
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Service Magazine
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

1966 CAT 561B
USD $18,306 
1966 CAT 561B

Conquest Equipment
Oxbow, Saskatchewan, Canada
1966 CAT 561B
Call 
1966 CAT 561B

Terra Point LLC
Dallas, Texas
1974 CAT 561B
Call 
1974 CAT 561B

Terra Point LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.