AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FINAL DRIVE--Lower Half--Part 2 of 2 Note: Quantities shown are those required for both R.H. and L.H. sides 561B


POWER TRAIN
DRIVE GP-FINAL
UNDERCARRIAGE
IDLER GP
FRAME AND BODY
DRAWBAR GP
SUPPORT GP
FRAME GP

PIPELAYER 561B PIPELAYER 62A
 561 PIPELAYER 62A00205-00387 (MACHINE) UE036198 561B 62A   (1959)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE
FINAL DRIVE
FINAL DRIVE
FINAL DRIVE
 

#UE0361980080
 

FINAL DRIVE

FINAL DRIVE--Lower Half--Part 2 of 2
Note: Quantities shown are those required for both R.H. and L.H. sides
c77778 UE036198
None FINAL DRIVE Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7M-5060 [12] PIN  
    (.375" SHOULDER DIAMETER)
    -OR-
  9M-4502 [12] PIN  
    (.328" SHOULDER DIAMETER)
    (3 IN EACH RETAINER ASSEM. 7M476)
  1A-2029 [16] BOLT  
  3B-4506 [16] LOCKWASHER  
  7B-7274 [2] GASKET  
  2F-7576 [2] SHAFT  
  8H-3326 [2] NUT  
  2B-8093 [2] PIN  
  2B-8092 [2] RING  
  2B-8162 [4] DOWEL  
  5B-7267 [4] CORK  
  7B-0358 [2] CONE  
  7B-4956 [2] CUP  
  7M-0481 R [4] SEAL GROUP  
  7M-0475 [8] RING  
    (2 IN EACH SEAL GROUP 7M481)
  7M-0476 [4] RETAINER ASSEM.  
  6B-4598 [28] BOLT  
  6B-6682 [28] NUT  
  1H-2433 [6] LOCK (6.75" LONG)  
  5M-5241 [8] LOCK (4" LONG)  
  5M-5242 [2] GEAR (49T.)  
  0S-1585 [40] BOLT  
  3B-4508 [40] LOCKWASHER  
  8H-2247 [2] GASKET  
  8M-6634 [2] CASE  
  3B-0551 [4] PLUG  
  7M-0479 [4] RETAINER  
  8H-0707 [12] SCREW  
  3B-4504 [12] LOCKWASHER  
  4F-7388 [4] SEAL  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  8M-6960 [2] EXTENSION  
  1A-4073 [2] GUARD  
  1H-8278 [4] SEAL  
  4F-6070 [4] GUARD  
    (2 IN EACH ASSEM. 8M6041&8M6040)
  4B-4340 [18] RIVET  
    (9 IN EACH ASSEM. 8M6041 & 8m6040)
  7M-0477 [2] NUT  
  4H-9040 [2] NUT  
  3F-1960 [2] LOCK  
  3F-1962 [2] GASKET  
  8M-6041 [2] SPROCKET ASSEM. (STD)  
    -OR-
  8M-6040 [2] SPROCKET ASSEM. (SNOW)  
  3H-2643 [1] RIM (STD)  
  4H-5679 [1] RIM (SNOW)  
    (TRACK SPROCKET REPLACEMENT)
  3F-1958 [2] GUARD  
  0S-0509 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  3F-1547 [2] SEAL  
  4B-5006 [2] FITTING  
  2S-1035 [2] SUPPORT ASSEM.  
  2B-7408 [2] PIPE PLUG  
  1F-1006 [2] DOWEL  
    (1 IN EACH ASSEM. 2S1477)
  5M-5244 R [2] HUB  
  3F-1972 [2] RETAINER ASSEM.  
  8B-6343 [2] CUP  
  3F-1396 [2] CONE  
  1B-8742 [2] KEY  
  3H-2617 [4] PIN (ROLL)  
    (2 IN EACH ASSEM. 3F1972)
  2F-2815 [2] LOCK  
  2S-4366 [8] SHIM  
  1A-3585 [2] NUT  
  3F-1956 [2] CAP  
  8B-1312 [4] PIN  
    (2 IN EACH ASSEM. 2S1477)
  2M-0122 [4] DOWEL  
  3F-1965 [2] BUSHING  
    (1 IN EACH ASSEM. 2S1035)
  1A-2469 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3F-1955 [2] GASKET  
  4B-1281 [16] MACH. SCREW  
  3F-1954 [2] RETAINER  
  8M-0476 [2] CAGE  
  2S-1477 [2] HOLDER ASSEM.  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  9H-3439 [2] LOCK  
  1F-4583 [2] SEAL  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0361980081
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 62A205 to 62A224 inclusive
Note: Quantities shown are those required for both R.H. AND L.H. sides
c123892 UE036198
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-6707 [2] VALVE  
  5M-6708 [4] WASHER  
  5M-6709 [2] BALLCHECK ASSEM.  
  6H-9049 [2] FITTING  
  7H-2445 [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  5M-8629 [2] ROD ASSEM.  
  0V-0459 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1F-9489 [8] WASHER  
  2H-6844 [8] LOCK  
  1S-4922 [2] PLATE  
    (CAUTION)
  1S-4932 [2] PLATE  
    (WARNING)
  7B-3028 [8] SCREW  
  4B-1382 [8] PLATE  
  7F-2022 [4] PIN  
  1B-4205 [4] NUT  
  3B-4508 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  1M-3935 [2] IDLER ASSEM.  
 

#UE0361980082
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 2 of 2
Serial No. 62A205 to 62A224 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
c123894 UE036198
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-2424 [2] SLEEVE  
  7H-2438 [2] BOLT  
  1B-4210 [2] NUT  
  2S-1654 [2] WASHER  
  0S-1620 [2] BOLT  
  2M-2414 [2] BEARING  
    (RIGHT HAND INNER-LEFT HAND OUTER)
  1M-3094 [4] BUSHING ASSEM.  
  9B-2289 [8] PIN  
    (2 IN EACH BUSHING ASSEM. 1M3094)
  2S-1731 [2] PLUG  
  2M-2858 R [4] SEAL GROUP  
  5M-1913 [2] SHAFT  
  7F-8267 [4] RING  
  1M-3097 [8] SEAL (RUBBER)  
    (2 IN EACH SEAL GROUP 2M2858)
  1A-2029 [24] BOLT  
  7B-9457 [12] LOCK  
  4M-8292 [4] BUSHING  
    (1 IN EACH BUSHING ASSEM. 1M3094)
  5F-3092 [2] SEAL  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  2S-5866 [2] PACKING  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  4M-7021 [2] SEAL  
  4M-7022 [2] RING  
  9H-7669 [2] WASHER  
  7H-2423 [4] RING  
  8M-6676 [2] CYLINDER  
  1S-6422 [2] PILOT ASSEM.  
  0S-1585 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  2M-2413 [2] BEARING  
    (RIGHT HAND-OUTER-LEFT HAND INNER)
  0S-1573 [16] BOLT  
  1D-4719 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  2M-3508 [24] SHIM  
  7M-9398 [4] PLATE  
  1F-8875 [4] PLATE ASSEM.  
  6B-6022 [8] PIN  
    (2 IN EACH PLATE ASSEM. 1F8875)
  1H-6227 [4] RING  
  7M-5050 [4] COLLAR  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0361980083
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 62A225 to 62A233 inclusive
c123895 UE036198
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-6707 [2] VALVE  
  5M-6708 [4] WASHER  
  5M-6709 [2] BALLCHECK ASSEM.  
  6H-9049 [2] FITTING  
  7H-2445 [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  5M-8629 [2] ROD ASSEM.  
  1M-3935 [2] IDLER ASSEM.  
  0V-0459 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1F-9489 [8] WASHER  
  2H-6844 [8] LOCK  
  1S-4922 [2] PLATE  
    (CAUTION)
  1S-4932 [2] PLATE  
    (WARNING)
  7B-3028 [8] SCREW  
  0L-1329 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-1382 [8] PLATE  
  7F-2022 [4] PIN  
  1B-4205 [4] NUT  
  3B-4508 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  3S-2445 [2] ARM  
    (R.H. OUTER-L.H. INNER)
  3S-2446 [2] ARM  
    (R.H. INNER-L.H. OUTER)
 

#UE0361980084
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 2 of 2
Serial No. 62A225 to 62A233 inclusive
c123896 UE036198
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-2424 [2] SLEEVE  
  7H-2438 [2] BOLT  
  1B-4210 [2] NUT  
  2S-1654 [2] WASHER  
  0S-1620 [2] BOLT  
  3S-2447 [4] BEARING  
  1M-3094 [4] BUSHING ASSEM.  
  9B-2289 [8] PIN  
    (2 IN EACH BUSHING ASSEM. 1M3094)
  2S-1731 [2] PLUG  
  2M-2858 R [4] SEAL GROUP  
  5M-1913 [2] SHAFT  
  7F-8267 [4] RING  
  1M-3097 [8] SEAL (RUBBER)  
    (2 IN EACH SEAL GROUP 2M2858)
  1A-2029 [24] BOLT  
  7B-9457 [12] LOCK  
  4M-8292 [4] BUSHING  
    (1 IN EACH BUSHING ASSEM. 1M3094)
  5F-3092 [2] SEAL  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  4M-7021 [2] SEAL  
  4M-7022 [2] RING  
  2S-5867 [2] SEAL  
  7H-2423 [4] RING  
  8M-6676 [2] CYLINDER  
  1S-6422 [2] PILOT ASSEM.  
  0S-1585 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  0S-1573 [16] BOLT  
  1D-4719 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  2M-3508 [24] SHIM  
  7M-9398 [4] PLATE  
  1F-8875 [4] PLATE ASSEM.  
  6B-6022 [8] PIN  
    (2 IN EACH PLATE ASSEM. 1F8875)
  1H-6227 [4] RING  
  7M-5050 [4] COLLAR  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0361980085
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 62A234-Up
c123897 UE036198
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-5926 [2] VALVE  
  2S-5925 [2] VALVE  
  5M-6708 [4] WASHER  
  1S-5252 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
  7H-2445 [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  3S-0311 [2] ROD GROUP  
  8S-2560 [2] IDLER ASSEM.  
  0V-0459 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1F-9489 [8] WASHER  
  2H-6844 [8] LOCK  
  2S-5927 [2] PLATE  
    (CAUTION)
  7B-3028 [8] SCREW  
    (1/2 EACH IN 3S311 ROD GROUP)
  0L-1329 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-1382 [8] PLATE  
  7F-2022 [4] PIN  
  1B-4205 [4] NUT  
  3B-4508 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  3S-2445 [2] ARM  
    (R.H. OUTER - L.H. INNER)
  3S-2446 [2] ARM  
    (R.H. INNER - L.H. OUTER)
 

#UE0361980086
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 2 of 2
Serial No. 62A234-Up
c123896 UE036198
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-2424 [2] SLEEVE  
  7H-2438 [2] BOLT  
  1B-4210 [2] NUT  
  2S-1654 [2] WASHER  
  0S-1620 [2] BOLT  
  3S-2447 [4] BEARING  
  1M-3094 [4] BUSHING ASSEM.  
  9B-2289 [8] PIN  
    (2 IN EACH BUSHING ASSEM. 1M3094)
  2S-1731 [2] PLUG  
  2M-2858 R [4] SEAL GROUP  
  5M-1913 [2] SHAFT  
  7F-8267 [4] RING  
  1M-3097 [8] SEAL (RUBBER)  
    (2 IN EACH SEAL GROUP 2M2858)
  1A-2029 [24] BOLT  
  7B-9457 [12] LOCK  
  4M-8292 [4] BUSHING  
    (1 IN EACH BUSHING ASSEM. 1M3094)
  5F-3092 [2] SEAL  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  4M-7021 [2] SEAL  
  4M-7022 [2] RING  
  2S-5867 [2] SEAL  
  7H-2423 [4] RING  
  8M-6676 [2] CYLINDER  
  1S-6422 [2] PILOT ASSEM.  
  0S-1585 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  0S-1573 [16] BOLT  
  1D-4719 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  2M-3508 [24] SHIM  
  7M-9398 [4] PLATE  
  1F-8875 [4] PLATE ASSEM.  
  6B-6022 [8] PIN  
    (2 IN EACH PLATE ASSEM. 1F8875)
  1H-6227 [4] RING  
  7M-5050 [4] COLLAR  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0361980087
 

5H-0086: DRAWBAR GP

5H86 DRAWBAR GROUP--Fixed
Refer also to Page 133 for special parts
c42358 UE036198
5H0086 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1B-4209 [6] NUT  
  3B-4516 [6] LOCKWASHER  
  5H-0085 [1] SUPPORT ASSEM.  
  8F-6124 [3] BOLT  
  1B-4209 [3] NUT  
  3B-4516 [3] LOCKWASHER  
  5H-0081 [1] PLATE ASSEM.  
  7B-0863 [1] LATCH  
  7B-0899 [1] BOLT  
  1B-4441 [1] NUT  
  3B-4611 [1] COTTER PIN  
  7F-9547 [1] PIN ASSEM.  
  7F-9543 [1] COLLAR  
    (PART OF ASSEM. 7F9547)
  5H-0080 [1] PLATE ASSEM.  
 

#UE0361980088
 

MAIN FRAME SUPPORT

MAIN FRAME SUPPORT
c77749 UE036198
None MAIN FRAME SUPPORT Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1577 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1D-4626 [16] BOLT  
  3B-4514 [16] LOCKWASHER  
  8B-5144 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  2S-9724 [1] SUPPORT ASSEM.  
  1D-4626 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
  2M-2992 [4] SHIM (.0598" THICK)  
  2M-2993 [8] SHIM (.0299" THICK)  
  2M-2991 [8] BAR  
 

#UE0361980089
 

TRACK ROLLER FRAME

TRACK ROLLER FRAME
Note: Quantities shown are those required for both R.H. and L.H. sides
c77747 UE036198
None TRACK ROLLER FRAME Parts scheme
  For full view, you need register

Parts for your 561B PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4585 [4] BOLT  
2. 3B-4510 [46] LOCKWASHER  
3. 1A-1135 [8] BOLT  
  9H-1024 [8] WASHER  
  5M-4667 [16] SHIM  
4. 2S-9618 [2] BRACKET ASSEM.  
5. 3S-1639 [2] DOWEL  
6. 0S-1589 [24] BOLT  
7. 1M-7921 [2] BRACKET  
8. 7B-6442 [2] STRIP  
9. 2S-8275 [1] FRAME ASSEM. (Right Hand)  
  2S-8276 [1] FRAME ASSEM. (Left Hand)  
10. 6B-7697 [4] PLATE  
11. 7B-6003 [2] PLATE  
12. 4F-0325 [12] PLATE  
13. 7B-5994 [4] PLATE  
14. 7B-5985 [12] PLATE  
15. 1M-9532 [2] PLATE  
16. 2K-2879 [4] GUSSET  
17. 7B-5995 [4] STRIP ASSEM.  
    (1/2 of each in 2S8275 and 2S8276 Frame Assem.)
18. 7B-5997 [4] STRIP  
19. 4B-4418 [20] RIVET  
    (1/4 of each in each 7B5995 Strip Assem.)
20. [8] BOLT  
21. 0S-1566 [6] BOLT  
22. 2B-7558 [30] CORK  
23. 2M-7207 [2] BRACKET  
24. 7B-6444 [4] STRIP  
25. 7B-6443 [2] STRIP  
26. 0S-1625 [4] BOLT  
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Higher Capacity Bearing Used On Final Drive Pinion{4091}
1978/10/30
Torque Turn Adjustment Of Final Drive Hub Bearings{0654,4050}
1979/05/07
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog 561B :

FINAL DRIVE
FINAL DRIVE
BRAKE BAND ASSEMBLIES
BRAKE BAND ASSEMBLIES
BRAKES
BRAKES
STEERING CLUTCH GROUP
7H-2076 STEERING CLUTCH GROUP
STEERING CLUTCH CONTROL
STEERING CLUTCH CONTROL
STEERING CLUTCH HYDRAULIC CONTROL MECHANISM
STEERING CLUTCH HYDRAULIC CONTROL MECHANISM
STEERING CLUTCH HYDRAULIC CONTROL MECHANISM
STEERING CLUTCH HYDRAULIC CONTROL MECHANISM
TRANSMISSION CASE AND COVERS GROUP
2S-9615 TRANSMISSION CASE AND COVERS GROUP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
FRONT IDLER GROUP
2M-3035 FRONT IDLER GROUP
DRAWBAR GP
5H-0086 DRAWBAR GP
MAIN FRAME SUPPORT
MAIN FRAME SUPPORT

Truck sale:

1966 CAT 561B
USD $18,306 
1966 CAT 561B

Conquest Equipment
Oxbow, Saskatchewan, Canada
1966 CAT 561B
Call 
1966 CAT 561B

Terra Point LLC
Dallas, Texas
1974 CAT 561B
Call 
1974 CAT 561B

Terra Point LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.