AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4J9006 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part 1--Type 1 Part of 9J4477 Bulldozer Arrangement and 5J461 Hydraulic Control Group listed on Pages 12B-1 and 74 824S


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC

BULLDOZER 824S BULLDOZER 35G
 824 & 834 TRACTORS 824B, 825B, 834 & 835 COMPACTORS 826B LAN 35G00001-UP UE070008 824S 35G   (1978)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
HYDRAULIC SWIVEL JOINT GROUP
3J-9519 HYDRAULIC SWIVEL JOINT GROUP
HYDRAULIC SWIVEL JOINT GROUP
3J-9519 HYDRAULIC SWIVEL JOINT GROUP
HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
 

#UE0700080250
 

4J-9006: HYDRAULIC LINES GROUP

4J9006 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part 1--Type 1
Part of 9J4477 Bulldozer Arrangement and 5J461 Hydraulic Control Group listed on Pages 12B-1 and 74
c77248 UE070008
4J9006 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1566 [1] BOLT  
2. 3B-4510 [1] LOCKWASHER  
3. 4B-5275 [1] WASHER  
4. 1H-3305 [4] FLANGE  
5. 4J-0520 [2] SEAL  
6. 5J-0535 [1] HOSE ASSEM. (34" long overall)  
    (Ref. No. 37 to Tilt & Tip Cylinder)
7. 0S-1588 [8] BOLT  
8. 3B-4506 [9] LOCKWASHER  
9. 1D-4556 [4] BOLT  
10. 3B-4507 [16] LOCKWASHER  
11. 4K-2497 [1] CLAMP  
12. 5J-2007 [1] TUBE ASSEM. (38.68" long overall)  
    (Ref. No. 33 to Ref. No. 37)
13. 0S-1595 [2] BOLT  
14. 3B-4508 [8] LOCKWASHER  
15. 4B-5273 [2] WASHER  
16. 3H-3667 [2] FLANGE  
17. 4J-0522 [5] SEAL  
18. 0T-0768 [8] BOLT  
19. 4J-4712 [1] TUBE ASSEM. (35.07" long overall)  
    (Hydraulic Tank to Swivel Joint)
20. 1B-2886 [2] BOLT (3.75" long)  
21. 0S-1587 [2] BOLT (1.75" long)  
22. 4J-0524 [2] SEAL  
23. 4J-4714 [1] TUBE ASSEM. (34.34" long overall)  
    (Hydraulic Tank to Swivel Joint)
24. 3B-8991 [1] FITTING  
25. 1F-1344 [2] NUT  
    (Part of 3B8991 Fitting)
26. 0S-0509 [1] BOLT  
27. 4J-8831 [1] TUBE (Oil Drain)  
    (22.78" long)
28. [1] CLIP  
29. 3D-2023 [1] GROMMET  
30. 3B-8998 [1] FITTING  
31. 1F-1344 [1] NUT  
    (Part of 3B8998 Fitting)
32. 4J-5603 [1] TUBE (8.19" long)  
    (Swivel Joint to Ref. No. 27)
33. 4K-2592 [1] HOSE ASSEM. (41.32" long overall)  
    (Swivel Joint to Ref. No. 12)
34. 0T-0772 [4] BOLT  
35. 0L-1329 [2] BOLT  
36. 1D-4619 [2] NUT  
37. 5J-0295 [1] TUBE ASSEM. (16.86" long overall)  
    (Ref. No. 12 to Ref. No. 6)
 

#UE0700080251
 

4J-9006: HYDRAULIC LINES GROUP

4J9006 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part 2--Type 1
Part of 9J4477 Bulldozer Arrangement and 4J461 Hydraulic Control Group listed on Page 12B-1 and 74
3J9519 Swivel Joint parts are shown on Pages 62 and 62A
c77249 UE070008
4J9006 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5368 [3] BOLT  
2. 3B-4507 [11] LOCKWASHER  
3. 8B-9725 [6] WASHER  
4. 0S-1585 [3] BOLT  
5. 3B-4508 [7] LOCKWASHER  
6. 4K-1111 [3] BRACKET  
7. 3J-9519 Y [1] SWIVEL JOINT GROUP  
    (See Separate Illustration)
8. 4K-2591 [1] HOSE ASSEM. (37.77" long overall)  
    (Ref. No. 7 to Ref. No. 33)
9. 4J-0522 [3] SEAL  
10. 3H-3667 [2] FLANGE  
11. 0T-0772 [4] BOLT  
12. 0S-1595 [2] BOLT  
13. 4B-5273 [2] WASHER  
14. 0L-1329 [2] BOLT  
15. 1D-4719 [2] NUT  
16. 1D-4556 [4] BOLT  
17. 0S-1588 [4] BOLT  
18. 3B-4506 [9] LOCKWASHER  
19. 1H-3305 [2] FLANGE  
20. 4J-0520 [3] SEAL  
21. 0S-1566 [1] BOLT  
22. 4B-4510 [1] LOCKWASHER  
23. 4B-5275 [1] WASHER  
24. 5J-0536 [1] HOSE ASSEM. (34" long overall)  
    (Ref. No. 31 to Tilt & Tip Cylinder)
25. 1A-2029 [1] BOLT  
26. 1D-4717 [1] NUT  
27. 4B-5271 [2] WASHER  
28. 5J-0284 [1] TUBE ASSEM. (32.77" long overall)  
    (5J535 Hose Assem. to Tilt & Tip Cylinder)
29. 0L-1143 [2] BOLT (2.50" long)  
30. 0S-1571 [2] BOLT (1.75" long)  
31. 5J-0296 [1] TUBE ASSEM. (16.86" long overall)  
    (Ref. No. 33 to Ref. No. 24)
32. 4K-2497 [1] CLAMP  
33. 5J-2008 [1] TUBE ASSEM. (54.50" long overall)  
    (Ref. No. 8 to Ref. No. 31)
  Y   SEPARATE ILLUSTRATION
 

#UE0700080252
 

4J-9006: HYDRAULIC LINES GROUP

4J9006 HYDRAULIC LINES GROUP--Part 1--Type 2
Part of 9J4477 Bulldozer Arrangement, 5J461 Hydraulic Control Group, 8S2419 and 8S7085
Hydraulic Control Arrangements listed on Pages 12B-1, 74, 74A and 74B
c142719 UE070008
4J9006 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1566 [1] BOLT  
2. 3B-4510 [1] LOCKWASHER  
3. 4B-5275 [1] WASHER  
4. 1H-3305 [4] FLANGE  
5. 4J-0520 [2] SEAL  
6. 8S-8271 C [1] HOSE ASSEM.  
  8S-9355 H HOSE 28.9 in.  
7. 3S-7252 [2] SLEEVE  
8. 3S-8503 [1] STEM ASSEM. (90 degrees)  
  3S-8499 [1] STEM ASSEM. (45 degrees)  
9. 1D-4556 [4] BOLT  
10. 3B-4507 [16] LOCKWASHER  
11. 4K-2497 [1] CLAMP  
12. 5J-2007 [1] TUBE ASSEM.  
13. 0S-1595 [2] BOLT  
14. 3B-4508 [8] LOCKWASHER  
15. 4B-5273 [2] WASHER  
16. 3H-3667 [2] FLANGE  
17. 4J-0522 [5] SEAL  
18. 0T-0768 [8] BOLT  
19. 4J-4712 [1] TUBE ASSEM.  
20. 1B-2886 [2] BOLT (3.75 in. long)  
21. 0S-1587 [2] BOLT (1.75 in. long)  
22. 4J-0524 [2] SEAL  
23. 4J-2184 [1] FITTING  
  4J-2207 [1] NUT  
  4J-2208 [1] SLEEVE  
  3J-7354 [1] SEAL  
24. 5S-1759 STRAPPING 2 ft.  
  4K-6633 [4] STUD  
25. 6J-1335 [1] TUBE  
26. 4J-4714 [1] TUBE ASSEM.  
27. 3B-8991 [1] FITTING  
  1F-1344 [2] NUT  
28. 6J-1337 [1] TUBE  
29. 3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
30. 8S-8279 C [1] HOSE ASSEM.  
  8S-9348 H HOSE 36.2 in.  
  3S-8567 [1] STEM ASSEM. (Straight)  
31. 3S-7116 [2] SLEEVE  
32. 3S-8569 [1] STEM ASSEM. (30 degrees)  
33. 0T-0772 [4] BOLT  
34. 0L-1329 [2] BOLT  
35. 1D-4619 [2] NUT  
36. 5J-0295 [1] TUBE ASSEM.  
37. 0S-1588 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#UE0700080253
 

4J-9006: HYDRAULIC LINES GROUP

4J9006 HYDRAULIC LINES GROUP--Part 2--Type 2
Part of 9J4477 Bulldozer Arrangement, 5J461 Hydraulic Control Group, 8S2419 and 8S7085
Hydraulic Control Arrangements listed on Pages 12B-1, 74, 74A and 74B
3J9519 Swivel Joint parts are shown on Pages 62 and 62A
c142720 UE070008
4J9006 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5368 [3] BOLT  
2. 3B-4507 [11] LOCKWASHER  
3. 8B-9725 [6] WASHER  
4. 0S-1585 [3] BOLT  
5. 3B-4508 [7] LOCKWASHER  
6. 4K-1111 [3] BRACKET  
7. 3J-9519 Y [1] SWIVEL JOINT GROUP  
    (Separate Illustration)
8. 8S-8273 C [1] HOSE ASSEM.  
  8S-9348 H HOSE 32.9 in.  
9. 3S-6632 [2] STEM ASSEM.  
10. 3S-7116 [2] SLEEVE  
11. 3H-3667 [2] FLANGE  
12. 4J-0522 [3] SEAL  
13. 0T-0772 [4] BOLT  
14. 0S-1595 [2] BOLT  
  4B-5273 [2] WASHER  
15. 0L-1329 [2] BOLT  
  1D-4719 [2] NUT  
16. 1D-4556 [4] BOLT  
17. 0S-1588 [4] BOLT  
18. 3B-4506 [9] LOCKWASHER  
19. 1H-3305 [2] FLANGE  
20. 4J-0520 [3] SEAL  
21. 0S-1566 [1] BOLT  
22. 3B-4510 [1] LOCKWASHER  
23. 4B-5275 [1] WASHER  
24. 8S-8270 C [1] HOSE ASSEM.  
  8S-9355 H HOSE 28.90 in.  
25. 3S-7252 [2] SLEEVE  
26. 3S-8499 [1] STEM ASSEM. (45 degrees)  
  3S-8503 [1] STEM ASSEM. (90 degrees)  
27. 1A-2029 [1] BOLT  
28. 1D-4717 [1] NUT  
29. 4B-5271 [2] WASHER  
30. 5J-0284 [1] TUBE ASSEM.  
31. 0L-1143 [2] BOLT (2.50 in. long)  
32. 0S-1571 [2] BOLT (1.75 in. long)  
33. 5J-0296 [1] TUBE ASSEM.  
34. 4K-2497 [1] CLAMP  
35. 5J-2008 [1] TUBE ASSEM.  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UE0700080254
 

4J-9006: HYDRAULIC LINES GROUP

4J9006 HYDRAULIC LINES GROUP--Part 1--Type 3
Part of 9J4477 Bulldozer Arrangement, 5J461 Hydraulic Control Group, 8S2419
and 8S7085 Hydraulic Control Arrangements listed on Pages 12B-1, 74, 74A and 74B
c142721 UE070008
4J9006 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1566 [1] BOLT  
2. 3B-4510 [1] LOCKWASHER  
3. 4B-5275 [1] WASHER  
4. 1P-4577 C [4] FLANGE  
5. 4J-0520 [2] SEAL  
6. 8S-8271 [1] HOSE ASSEM.  
  8S-9355 H HOSE 28.9 in.  
7. 3S-7252 [2] SLEEVE  
8. 3S-8503 [1] STEM ASSEM. (90 degrees)  
  3S-8499 [1] STEM ASSEM. (45 degrees)  
9. 1D-4556 [4] BOLT  
10. 3B-4507 C [12] LOCKWASHER  
11. 4K-2497 [1] CLAMP  
12. 5J-2007 [1] TUBE ASSEM.  
13. 0S-1595 [2] BOLT  
14. 3B-4508 [8] LOCKWASHER  
15. 4B-5273 [2] WASHER  
16. 1P-4578 C [4] FLANGE  
17. 4J-0522 [5] SEAL  
18. 0T-0768 [8] BOLT  
19. 4J-4712 [1] TUBE ASSEM.  
20. 1B-2886 [2] BOLT (3.75 in. long)  
21. 0S-1587 [2] BOLT (1.75 in. long)  
22. 4J-0524 [2] SEAL  
23. 4J-2184 [1] FITTING  
  4J-2207 [1] NUT  
  4J-2208 [1] SLEEVE  
  3J-7354 [1] SEAL  
24. 6K-0806 C [2] STRAP  
25. 6J-1335 [1] TUBE  
26. 4J-4714 [1] TUBE ASSEM.  
27. 3B-8991 [1] FITTING  
  1F-1344 [2] NUT  
28. 6J-1337 [1] TUBE  
29. 3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
30. 8S-8279 [1] HOSE ASSEM.  
  8S-9348 H HOSE 36.2 in.  
  3S-8567 [1] STEM ASSEM. (Straight)  
31. 3S-7116 [2] SLEEVE  
32. 3S-8569 [1] STEM ASSEM. (30 degrees)  
33. 0T-0772 C [8] BOLT  
34. 0L-1329 [2] BOLT  
35. 1D-4619 [2] NUT  
36. 5J-0295 [1] TUBE ASSEM.  
37. 0S-1588 [8] BOLT  
  C   INDICATES CHANGE
  H   ORDER BY THE INCH
 

#UE0700080255
 

4J-9006: HYDRAULIC LINES GROUP

4J9006 HYDRAULIC LINES GROUP--Part 2--Type 3
Part of 9J4477 Bulldozer Arrangement, 5J461 Hydraulic Control Group, 8S2419 and 8S7085
Hydraulic Control Arrangements listed on Pages 12B-1, 74, 74A and 74B
3J9519 Swivel Joint parts are shown on Pages 62 and 62A
c142722 UE070008
4J9006 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5368 [3] BOLT  
2. 3B-4507 C [8] LOCKWASHER  
3. 8B-9725 [6] WASHER  
4. 0S-1585 [3] BOLT  
5. 3B-4508 [7] LOCKWASHER  
6. 4K-1111 [3] BRACKET  
7. 3J-9519 Y [1] SWIVEL JOINT GROUP  
    (Separate Illustration)
8. 8S-8273 [1] HOSE ASSEM.  
  8S-9348 H HOSE 32.9 in.  
9. 3S-6632 [2] STEM ASSEM.  
10. 3S-7116 [2] SLEEVE  
11. 1P-4578 C [4] FLANGE  
12. 4J-0522 [3] SEAL  
13. 0T-0320 C [8] BOLT  
14. 0S-1595 [2] BOLT  
  4B-5273 [2] WASHER  
15. 0L-1329 [2] BOLT  
  1D-4719 [2] NUT  
16. 1D-4556 [4] BOLT  
17. 0S-1588 C [8] BOLT  
18. 3B-4506 C [5] LOCKWASHER  
19. 1P-4577 C [4] FLANGE  
20. 4J-0520 [3] SEAL  
21. 0S-1566 [1] BOLT  
22. 3B-4510 [1] LOCKWASHER  
23. 4B-5275 [1] WASHER  
24. 8S-8270 [1] HOSE ASSEM.  
  8S-9355 H HOSE 28.90 in.  
25. 3S-7252 [2] SLEEVE  
26. 3S-8499 [1] STEM ASSEM. (45 degrees)  
  3S-8503 [1] STEM ASSEM. (90 degrees)  
27. 1A-2029 [1] BOLT  
28. 1D-4717 [1] NUT  
29. 4B-5271 [2] WASHER  
30. 5J-0284 [1] TUBE ASSEM.  
31. 0L-1143 [2] BOLT (2.50 in. long)  
32. 0S-1571 [2] BOLT (1.75 in. long)  
33. 5J-0296 [1] TUBE ASSEM.  
34. 4K-2497 [1] CLAMP  
35. 5J-2008 [1] TUBE ASSEM.  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UE0700080256
 

4J-9007: HYDRAULIC LINES GROUP

4J9007 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part One
Part of 5J462 Hydraulic Control Group listed on Page 74
c77251 UE070008
4J9007 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1566 [1] BOLT  
2. 3B-4510 [1] LOCKWASHER  
3. 4B-5275 [1] WASHER  
4. 1H-3305 [4] FLANGE  
5. 4J-0520 [2] SEAL  
6. 5J-0535 [1] HOSE ASSEM. (34" long overall)  
    (Ref. No. 37 to Tilt & Tip Cylinder)
7. 0S-1588 [8] BOLT  
8. 3B-4506 [9] LOCKWASHER  
9. 1D-4556 [4] BOLT  
10. 3B-4507 [16] LOCKWASHER  
11. 4K-2497 [1] CLAMP  
12. 5J-2009 [1] TUBE ASSEM. (55.71" long overall)  
    (Ref. No. 33 to Ref. No. 37)
13. 0S-1595 [2] BOLT  
14. 3B-4508 [8] LOCKWASHER  
15. 4B-5273 [2] WASHER  
16. 3H-3667 [2] FLANGE  
17. 4J-0522 [5] SEAL  
18. 0T-0768 [8] BOLT  
19. 4J-4712 [1] TUBE ASSEM. (35.07" long overall)  
    (Hydraulic Tank to Swivel Joint)
20. 1B-2886 [2] BOLT (3.75" long)  
21. 0S-1587 [2] BOLT (1.75" long)  
22. 4J-0524 [2] SEAL  
23. 4J-4714 [1] TUBE ASSEM. (34.34" long overall)  
    (Hydraulic Tank to Swivel Joint)
24. 3B-8991 [1] FITTING  
25. 1F-1344 [2] NUT  
    (Part of 3B8991 Fitting)
26. 0S-0509 [1] BOLT  
27. 4J-8831 [1] TUBE (Oil Drain)  
    (22.78" long)
28. [1] CLIP  
29. 3D-2023 [1] GROMMET  
30. 3B-8998 [1] FITTING  
31. 1F-1344 [1] NUT  
    (Part of 3b8998 Fitting)
32. 4J-5603 [1] TUBE (8.19" long)  
    (Swivel Joint to Ref. No. 27)
33. 4K-2592 [1] HOSE ASSEM. (41.32" long overall)  
    (Swivel Joint to Ref. No. 12)
34. 0T-0772 [4] BOLT  
35. 0L-1329 [2] BOLT  
36. 1D-4619 [2] NUT  
37. 5J-0295 [1] TUBE ASSEM. (16.86" long overall)  
    (Ref. No. 12 to Ref. No. 6)
 

#UE0700080257
 

4J-9007: HYDRAULIC LINES GROUP

4J9007 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part Two
Part of 5J462 Hydraulic Control Group listed on Page 74
3J9519 Hydraulic Swivel Joint Group parts are shown on Page 62
c77252 UE070008
4J9007 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5368 [3] BOLT  
2. 3B-4507 [11] LOCKWASHER  
3. 8B-9725 [6] WASHER  
4. 0S-1585 [3] BOLT  
5. 3B-4508 [7] LOCKWASHER  
6. 4K-1111 [3] BRACKET  
7. 3J-9519 Y [1] SWIVEL JOINT GROUP  
    (See Separate Illustration)
8. 4K-2591 [1] HOSE ASSEM. (37.77" long overall)  
    (Ref. No. 7 to Ref. No. 33)
9. 4J-0522 [3] SEAL  
10. 3H-3667 [2] FLANGE  
11. 0T-0772 [4] BOLT  
12. 0S-1595 [2] BOLT  
13. 4B-5273 [2] WASHER  
14. 0L-1329 [2] BOLT  
15. 1D-4719 [2] NUT  
16. 1D-4556 [4] BOLT  
17. 0S-1588 [4] BOLT  
18. 3B-4506 [9] LOCKWASHER  
19. 1H-3305 [2] FLANGE  
20. 4J-0520 [3] SEAL  
21. 0S-1566 [1] BOLT  
22. 3B-4510 [1] LOCKWASHER  
23. 4B-5275 [1] WASHER  
24. 5J-0536 [1] HOSE ASSEM. (34" long overall)  
    (Ref. No. 31 to Tilt & Tip Cylinder)
25. 1A-2029 [1] BOLT  
26. 1D-4717 [1] NUT  
27. 4B-5271 [2] WASHER  
28. 5J-0284 [1] TUBE ASSEM. (32.77" long overall)  
    (5J535 Hose Assem. to Tilt & Tip Cylinder)
29. 0L-1143 [2] BOLT (2.50" long)  
30. 0S-1571 [2] BOLT (1.75" long)  
31. 5J-0296 [1] TUBE ASSEM. (16.86" long overall)  
    (Ref. No. 33 to Ref. No. 24)
32. 4K-2497 [1] CLAMP  
33. 5J-2010 [1] TUBE ASSEM. (59.15" long overall)  
    (Ref. No. 8 to Ref. No. 31)
  Y   SEPARATE ILLUSTRATION
 

#UE0700080258
 

4J-9007: HYDRAULIC LINES GROUP

4J9007 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part 1--Type 2
Part of 5J462 Hydraulic Control Group, 8S2420 and 8S7084 Hydraulic Control Arrangements listed on Pages 74, 74A & 74B
c142715 UE070008
4J9007 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1566 [1] BOLT  
2. 3B-4510 [1] LOCKWASHER  
3. 4B-5275 [1] WASHER  
4. 1H-3305 [4] FLANGE  
5. 4J-0520 [2] SEAL  
6. 5J-0295 C [1] TUBE ASSEM.  
7. 0S-1588 [8] BOLT  
8. 3B-4506 [9] LOCKWASHER  
9. 1D-4556 [4] BOLT  
10. 3B-4507 [16] LOCKWASHER  
11. 4K-2497 [1] CLAMP  
12. 5J-2009 [1] TUBE ASSEM.  
13. 0S-1595 [2] BOLT  
14. 3B-4508 [8] LOCKWASHER  
15. 4B-5273 [2] WASHER  
16. 3H-3667 [2] FLANGE  
17. 4J-0522 [5] SEAL  
18. 0T-0768 [8] BOLT  
19. 4J-2184 [1] FITTING ASSEM.  
  4J-2207 [1] NUT  
  4J-2208 [1] SLEEVE  
  3J-7354 [1] "O" RING  
20. 4J-4712 [1] TUBE ASSEM.  
21. 1B-2886 [2] BOLT (3.75 in. long)  
22. 0S-1587 [2] BOLT (1.75 in. long)  
23. 4J-0524 [2] SEAL  
24. 4J-4714 [1] TUBE ASSEM.  
25. 4K-6633 [4] STUD  
26. 5S-1759 STRAPPING 2 ft  
27. 3B-8998 [1] FITTING  
28. 1F-1344 [1] NUT  
29. [1] TUBE (Oil Drain)  
30. 3B-8991 [1] FITTING  
31. 1F-1344 [2] NUT  
32. 6J-1335 [1] TUBE  
33. 8S-8279 C [1] HOSE ASSEM.  
  8S-9348 H HOSE 36.2 in.  
  3S-8567 [1] STEM ASSEM. (Straight)  
  3S-8569 [1] STEM ASSEM. (30 degrees)  
34. 3S-7116 [2] SLEEVE  
35. 0T-0772 [4] BOLT  
36. 0L-1329 [2] BOLT  
37. 1D-4619 [2] NUT  
38. 8S-8271 C [1] HOSE ASSEM. (R.H.)  
  8S-9355 H HOSE 28.90 in.  
39. 3S-7252 [2] SLEEVE  
40. 3S-8499 [1] STEM ASSEM. (45 degrees)  
41. 3S-8503 [1] STEM ASSEM. (90 degrees)  
  C   INDICATES CHANGE
 

#UE0700080259
 

4J-9007: HYDRAULIC LINES GROUP

4J9007 HYDRAULIC LINES GROUP--As Viewed from Rear Right Hand Side of Machine--Part 2--Type 2
Part of 5J462 Hydraulic Control Group, 8S2420 and 8S7084 Hydraulic Control Arrangements listed on Pages 74, 74A & 74B
3J9519 Swivel Joint parts are shown on Pages 62 & 62A
c142716 UE070008
4J9007 HYDRAULIC LINES GROUP Parts scheme
  For full view, you need register

Parts for your 824S BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5368 [3] BOLT  
2. 3B-4507 [11] LOCKWASHER  
3. 8B-9725 [6] WASHER  
4. 0S-1585 [3] BOLT  
5. 3B-4508 [7] LOCKWASHER  
6. 4K-1111 [3] BRACKET  
7. 3J-9519 Y [1] SWIVEL JOINT GROUP  
    (Separate Illustration)
8. 8S-8273 C [1] HOSE ASSEM.  
  8S-9348 H HOSE 32.9 in.  
9. 3S-7116 [2] SLEEVE  
  3S-8567 [2] STEM ASSEM.  
10. 4J-0522 [3] SEAL  
11. 3H-3667 [2] FLANGE  
12. 0T-0772 [4] BOLT  
13. 0S-1595 [2] BOLT  
14. 4B-5273 [2] WASHER  
15. 0L-1329 [2] BOLT  
16. 1D-4719 [2] NUT  
17. 1D-4556 [4] BOLT  
18. 0S-1588 [4] BOLT  
19. 3B-4506 [9] LOCKWASHER  
20. 1H-3305 [2] FLANGE  
21. 4J-0520 [3] SEAL  
22. 0S-1566 [1] BOLT  
23. 3B-4510 [1] LOCKWASHER  
24. 4B-5275 [1] WASHER  
25. 5J-2010 C [1] TUBE ASSEM.  
26. 1A-2029 [1] BOLT  
27. 1D-4717 [1] NUT  
28. 4B-5271 [2] WASHER  
29. 5J-0284 [1] TUBE ASSEM.  
30. 0L-1143 [2] BOLT (2.50 in. long)  
31. 0S-1571 [2] BOLT (1.75 in. long)  
32. 5J-0296 [1] TUBE ASSEM.  
33. 4K-2497 [1] CLAMP  
34. 8S-8270 C [1] HOSE ASSEM.  
  8S-9355 H HOSE 28.90 in.  
35. 3S-7252 [2] SLEEVE  
36. 3S-8499 [1] STEM ASSEM. (45 degrees)  
37. 3S-8503 [1] STEM ASSEM. (90 degrees)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 824S :

PUMP GP-VANE
7J-0597 PUMP GP-VANE
HYDRAULIC PUMP ASSEMBLY
5J-1535 HYDRAULIC PUMP ASSEMBLY
HYDRAULIC PUMP ASSEMBLY
5J-1535 HYDRAULIC PUMP ASSEMBLY
PUMP AND MOUNTING GROUP
5J-1556 PUMP AND MOUNTING GROUP
IMPLEMENT PUMP AND MOUNTING GROUP
6J-9860 IMPLEMENT PUMP AND MOUNTING GROUP
PUMP AND MOUNTING GROUP
6J-9861 PUMP AND MOUNTING GROUP
IMPLEMENT PUMP GROUP
8J-3812 IMPLEMENT PUMP GROUP
IMPLEMENT PUMP LINES GROUP
8K-0053 IMPLEMENT PUMP LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
4J-9006 HYDRAULIC LINES GROUP
HYDRAULIC LINES GROUP
4J-9007 HYDRAULIC LINES GROUP
4J-9007 HYDRAULIC LINES GROUP
HYDRAULIC LINES GROUP
4J-9007 HYDRAULIC LINES GROUP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.