AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G398 ENGINE, NATURALLY ASPIRATED 73B00198-00200 ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



GAS ENGINE G398 GAS ENGINE 73B
 G398 ENGINE, NATURALLY ASPIRATED 73B00198-00200 UE070028 G398 73B   (1963)

Parts group G398:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
REGULATOR ASSEMBLY
5L-2591 REGULATOR ASSEMBLY
5L2591 REGULATOR ASSEMBLY
PART OF CARBURETOR SHOWN ON PAGE 16
IGNITION GP
IGNITION SYSTEM
IGNITION SYSTEM
IGNITION SYSTEM
SERIAL NO. 73B92 ONLY
6L2830 MAGNETO ASSEMBLY PARTS ARE SHOWN ON PAGE 59
IGNITION SYSTEM EXPLOSION RESISTANT
IGNITION SYSTEM EXPLOSION RESISTANT
IGNITION SYSTEM EXPLOSION RESISTANT--PART 1 OF 2
SERIAL NO. 73B198 TO 73B200 INCLUSIVE
IGNITION SYSTEM EXPLOSION RESISTANT
IGNITION SYSTEM EXPLOSION RESISTANT
IGNITION SYSTEM EXPLOSION RESISTANT--PART 2 OF 2
SERIAL NO. 73B198 TO 73B200 INCLUSIVE
IGNITION SYSTEM
IGNITION SYSTEM
IGNITION SYSTEM
SERIAL NO. 73B198 TO 73B200 INCLUSIVE
6L2831 MAGNETO ASSEMBLY PARTS ARE SHOWN ON PAGE 60
MAGNETO GP
MAGNETO DRIVE
MAGNETO DRIVE
MAGNETO DRIVE
SERIAL NO. 73B92 ONLY
GOVERNOR AND MAGNETO DRIVE
GOVERNOR AND MAGNETO DRIVE
GOVERNOR AND MAGNETO DRIVE--Part 1 of 2
SERIAL NO. 73B92 ONLY
GOVERNOR AND MAGNETO DRIVE
GOVERNOR AND MAGNETO DRIVE
GOVERNOR AND MAGNETO DRIVE--Part 2 of 2
SERIAL NO. 73B92 ONLY
MAGNETO DRIVE
MAGNETO DRIVE
MAGNETO DRIVE
SERIAL NO. 73B198 TO 73B200 INCLUSIVE
MAGNETO ASSEMBLY
6L-2830 MAGNETO ASSEMBLY
6L2830 MAGNETO ASSEMBLY
PART OF IGNITION SYSTEM SHOWN ON PAGE 55
MAGNETO ASSEMBLY
6L-2831 MAGNETO ASSEMBLY
6L2831 MAGNETO ASSEMBLY
PART OF IGNITION SYSTEM SHOWN ON PAGE 58
STARTING MOTOR GP
AIR STARTING INSTALLATION GROUP
5L-2717 AIR STARTING INSTALLATION GROUP
5L2717 AIR STARTING INSTALLATION GROUP--L.H.--S.A.E. Opposite Engine Rotation
SERIAL NO. 73B92 ONLY
3L9922 WHISTLE VALVE, 1L2073 REGULATING VALVE AND 8F256 OILER PARTS ARE SHOWN ON PAGES 75 AND 76
AIR STARTING MOTOR ASSEMBLY
5L-1749 AIR STARTING MOTOR ASSEMBLY
5L1749 AIR STARTING MOTOR ASSEMBLY--S.A.E. Opposite Engine Rotation
SERIAL NO. 73B92 ONLY
3H3170 AIR MOTOR PARTS ARE SHOWN ON PAGE 73
MOTOR AS-AIR
6L-6731 MOTOR AS-AIR
6L6731 AIR STARTING MOTOR ASSEMBLY--S.A.E. Standard Engine Rotation
PART OF AIR STARTING SHOWN ON PAGE 72
3H3171 AIR MOTOR PARTS ARE SHOWN ON PAGE 74
AIR STARTING
AIR STARTING
AIR STARTING--L.H.--S.A.E. Standard Engine Rotation
SERIAL NO. 73B198 TO 73B200 INCLUSIVE
6L6731 AIR STARTING MOTOR ASSEMBLY, 3L9922 WHISTLE VALVE AND
1L2073 REGULATING VALVE PARTS ARE SHOWN ON PAGES 71 AND 75
MOTOR GP-AIR STARTING
3H-3170 MOTOR GP-AIR STARTING
3H3170 AIR MOTOR--S.A.E. Opposite Engine Rotation
PART OF 5L1749 AIR STARTING MOTOR ASSEMBLY SHOWN ON PAGE 71
LUG
3H-3171 LUG
3H3171 AIR MOTOR--S.A.E. Standard Engine Rotation
PART OF 6L6731 AIR STARTING MOTOR ASSEMBLY SHOWN ON PAGE 71
VALVE GP-WHISTLE
3L-9922 VALVE GP-WHISTLE
3L9922 WHISTLE VALVE
PART OF 5L2717 AIR STARTING INSTALLATION GROUP AND
AIR STARTING SHOWN ON PAGES 70 AND 72
VALVE GP-PRESSURE REDUCING
1L-2073 VALVE GP-PRESSURE REDUCING
1L2073 PRESSURE REDUCING REGULATING VALVE
PART OF 5L2717 AIR STARTING INSTALLATION GROUP AND
AIR STARTING SHOWN ON PAGES 70 AND 72
AIR STARTING OILER
8F-0256 AIR STARTING OILER
8F256 AIR STARTING OILER
PART OF 5L2717 AIR STARTING INSTALLATION GROUP
SHOWN ON PAGE 70
VALVE GP
VALVE GP-PRESSURE REDUCING
1L-2073 VALVE GP-PRESSURE REDUCING
1L2073 PRESSURE REDUCING REGULATING VALVE
PART OF 5L2717 AIR STARTING INSTALLATION GROUP AND
AIR STARTING SHOWN ON PAGES 70 AND 72

Information:

(For parts list, see above)

Special Instruction
Installation Of Thermocouples And Pyrometer{7466}
Installation Of Thermocouples And Pyrometer{7466}
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Engine News
New Regulator And Field Coil Assemblies Used
1981/11/25
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Identification Of External Terminals On Alternators
1987/04/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternators
G379, G398 & G399 ENGINES
Alternator Regulators
G379, G398 & G399 ENGINES
Alternator
30SI Series and 34SI Series Alternator
Systems Operation
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
Testing and Adjusting
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Disassembly and Assembly
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Engine News
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Engine News
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box
1992/10/01
Special Instruction
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Service Magazine
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
Engine News
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box
1992/10/01
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Specifications
Contactor Switches (Water Temperature)
6.25" BORE ENGINE ATTACHMENTS
Overspeed Contactor Switch
6.25" BORE ENGINE ATTACHMENTS
Contactor Switches<BR> (Oil Pressure)
6.25" BORE ENGINE ATTACHMENTS
Service Magazine
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Air Starter Relay Valve Improved{1462}
1991/06/24
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Disassembly and Assembly
Power Resistor And Zener Diode
G379, G398 & G399 ENGINES
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Digital Tachometer Available{7462}
1983/08/15
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Altronic III Ignition Systems Available
1982/10/20
Service Information Available For Altronic Ignition System
1983/09/14
New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System
1986/05/01
Improvements To Attachment Altronic&reg; Ignition Systems
1989/08/01
Spark Plug Gasket Available
1989/12/01
New Spark Plug Used In Ignition Groups
1989/12/01
Guidelines For Electrically Grounding Gas Engines {7423}
1997/08/01
Effects Of Corona On Spark Plugs {1555}
1998/07/01
Fabricated Spark Plug Gapping Tool {0766,1555}
1998/09/01
New Coil Kits Replace Shielded Transformer{1554,1561}
1998/10/01
Guidelines For Maintenance Of Spark Plugs In Gas Engines {1555}
2001/06/01
Recommendations for Gas Engine Spark Plugs {1550, 1555}
2013/08/21
Special Instruction
Service Replacement Of Stitt Plugs With Champion Plugs On G379, G398, &amp; G399 With Shielded Altronic Ignition{1555, 1558}
Service Replacement Of Stitt Plugs With Champion Plugs On G379, G398, & G399 With Shielded Altronic Ignition{1555, 1558}
Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}
Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}
Technical Information Bulletin
Problem With Spark Plugs In G300 Engines{1550, 1555, 1558}
Problem With Spark Plugs In G300 Engines{1550, 1555, 1558}
Specifications
Fairbanks Morse Ignition System
G379, G398 & G399 ENGINES
Pulser Coil - Fairbanks Morse
G379, G398 & G399 ENGINES
Generator Coil - Fairbanks Morse
G379, G398 & G399 ENGINES
Altronic Ignition System
G379, G398 & G399 ENGINES
Spark Plug And Adapters
G379, G398 & G399 ENGINES
Spark Plug And Adapters (Shielded Ignition)
G379, G398 & G399 ENGINES
Disassembly and Assembly
Spark Plugs
G379, G398 & G399 ENGINES
Spark Plug Adapters
G379, G398 & G399 ENGINES
Service Magazine
Preventive Maintenance For Natural Gas Engine Spark Ignition System{1550,1552,1555,1558}
1981/09/21
Altronic III Ignition Systems Available{1560}
1982/10/11
Service Information Available For Altronic Ignition System{1552}
1983/09/05
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System{1558,1555,1552,1408}
1986/04/21
Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}
1986/05/19
Spark Plug Gasket Available{1550,1555}
1989/11/27
New Spark Plug Used In Ignition Groups{1555}
1989/12/11
Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/03/29
Special Instruction
Conversion of Ignition Systems for G398 Engines{1550, 1552}
Conversion of Ignition Systems for G398 Engines{1550, 1552}
Technical Information Bulletin
Problem With Spark Plugs In G300 Engines{1550, 1555, 1558}
Problem With Spark Plugs In G300 Engines{1550, 1555, 1558}
Engine News
New Engine Timing Indicator Group Available
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group
1987/07/01
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}
1986/05/19
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
Glossary
SCSA SOLID STATE MAGNETO
Introduction
SCSA SOLID STATE MAGNETO
Typical Ignition Cycle Per Cylinder
SCSA SOLID STATE MAGNETO
Failure Analysis
SCSA SOLID STATE MAGNETO
Generator Coil Installation
SCSA SOLID STATE MAGNETO
Mechanical Drive Disassembly
SCSA SOLID STATE MAGNETO
Distribution Board Installation (12 Cylinder Magneto)
SCSA SOLID STATE MAGNETO
Distribution Board Installation (6 and 8 Cylinder Magnetos)
SCSA SOLID STATE MAGNETO
Power Resistor Installation
SCSA SOLID STATE MAGNETO
Power Board Installation
SCSA SOLID STATE MAGNETO
Zener Diode Installation
SCSA SOLID STATE MAGNETO
Storage Capacitor Installation
SCSA SOLID STATE MAGNETO
Pulser Coil Installation
SCSA SOLID STATE MAGNETO
Engine News
New Bolts And Plate Used On Governor Drive Group
1983/05/25
New Governor Drive Gears And Weight Assemblies
1983/09/14
New Drive Coupler Kit Used On Altronic Magneto
1985/03/01
New Service Seal Used In Altronic III Magnetos
1992/11/01
Special Instruction
Using the 6I2539 Installation Sleeve{1552}
Using the 6I2539 Installation Sleeve{1552}
Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}
Installation Of Altronic III Ignition Conversion Groups{1550, 1552, 1567}
Conversion of Ignition Systems for G398 Engines{1550, 1552}
Conversion of Ignition Systems for G398 Engines{1550, 1552}
Specifications
Governor Drive Upper Housing<BR> (Woodward Governor)
6.25" BORE ENGINE ATTACHMENTS
Shut-Off Solenoids
6.25" BORE ENGINE ATTACHMENTS
Setting Of The Magneto Timing - Fairbanks Morse
G379, G398 & G399 ENGINES
Generator Coil - Fairbanks Morse
G379, G398 & G399 ENGINES
Magneto Timing - Altronic
G379, G398 & G399 ENGINES
Magneto Drive
G379, G398 & G399 ENGINES
Governor Drive
G379, G398 & G399 ENGINES
Disassembly and Assembly
Governor Drive Housing (Upper) (Woodward Ug-8)
G379, G398 & G399 ENGINES
Governor Drive Housing
G379, G398 & G399 ENGINES
Magneto
G379, G398 & G399 ENGINES
Magneto (Coil And Mechanical Drive)
G379, G398 & G399 ENGINES
Distribution Board
G379, G398 & G399 ENGINES
Magneto Power Board
G379, G398 & G399 ENGINES
Altronic Magneto
SUPPLEMENT FOR ALTRONIC IGNITION SYSTEM
Service Magazine
Preventive Maintenance For Natural Gas Engine Spark Ignition System{1550,1552,1555,1558}
1981/09/21
Altronic III Ignition Systems Available{1560}
1982/10/11
New Bolts And Plate Used On Governor Drive Group{1288,1264}
1983/05/30
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information Available For Altronic Ignition System{1552}
1983/09/05
New Drive Coupler Kit Used On Altronic Magneto{1552}
1985/02/18
New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System{1558,1555,1552,1408}
1986/04/21
Magneto Improvements{1413}
1979/03/12
New Service Seal Used In Altronic III Magnetos{1552}
1992/11/23
General Service Information
Glossary
SCSA SOLID STATE MAGNETO
Introduction
SCSA SOLID STATE MAGNETO
Typical Ignition Cycle Per Cylinder
SCSA SOLID STATE MAGNETO
Failure Analysis
SCSA SOLID STATE MAGNETO
Generator Coil Installation
SCSA SOLID STATE MAGNETO
Mechanical Drive Disassembly
SCSA SOLID STATE MAGNETO
Distribution Board Installation (12 Cylinder Magneto)
SCSA SOLID STATE MAGNETO
Distribution Board Installation (6 and 8 Cylinder Magnetos)
SCSA SOLID STATE MAGNETO
Power Resistor Installation
SCSA SOLID STATE MAGNETO
Power Board Installation
SCSA SOLID STATE MAGNETO
Zener Diode Installation
SCSA SOLID STATE MAGNETO
Storage Capacitor Installation
SCSA SOLID STATE MAGNETO
Pulser Coil Installation
SCSA SOLID STATE MAGNETO
Engine News
Check Valve Added To Hydramechanical Shut-Off
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
&quot;Ugly's Electrical-References&quot; SEBD0983, Now Available
1990/06/01
Air Starter Relay Valve Improved
1991/07/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Service Replacement Of Stitt Plugs With Champion Plugs On G379, G398, &amp; G399 With Shielded Altronic Ignition{1555, 1558}
Service Replacement Of Stitt Plugs With Champion Plugs On G379, G398, & G399 With Shielded Altronic Ignition{1555, 1558}
Using the 6I2539 Installation Sleeve{1552}
Using the 6I2539 Installation Sleeve{1552}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Pressure Switches
6.25" BORE ENGINE ATTACHMENTS
Contactor Switches (Water Temperature)
6.25" BORE ENGINE ATTACHMENTS
Overspeed Contactor Switch
6.25" BORE ENGINE ATTACHMENTS
Shut-Off Valve (Water Temperature)<BR> (4L7108)
6.25" BORE ENGINE ATTACHMENTS
Shut-Off Valve (Air Inlet)<BR> (2N9924, 7L5536)
6.25" BORE ENGINE ATTACHMENTS
Contactor Switches<BR> (Oil Pressure)
6.25" BORE ENGINE ATTACHMENTS
Air Valves For Air Starting System
6.25" BORE ENGINE ATTACHMENTS
Air Starting Motors<BR> (3H3170, 3H3171)
6.25" BORE ENGINE ATTACHMENTS
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Air Starting Motor
6.25" BORE ENGINE ATTACHMENTS
Magneto
G379, G398 & G399 ENGINES
Magneto (Coil And Mechanical Drive)
G379, G398 & G399 ENGINES
Distribution Board
G379, G398 & G399 ENGINES
Magneto Power Board
G379, G398 & G399 ENGINES
Power Resistor And Zener Diode
G379, G398 & G399 ENGINES
Spark Plugs
G379, G398 & G399 ENGINES
Spark Plug Adapters
G379, G398 & G399 ENGINES
Electric Starting Motors
G379, G398 & G399 ENGINES
Altronic Magneto
SUPPLEMENT FOR ALTRONIC IGNITION SYSTEM
Service Magazine
Preventive Maintenance For Natural Gas Engine Spark Ignition System{1550,1552,1555,1558}
1981/09/21
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Altronic III Ignition Systems Available{1560}
1982/10/11
New Coolant Level Switch Used{7470,1354}
1982/10/18
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
New Wire Assemblies And Spark Plug Insulators Improve Service Life Of Ignition System{1558,1555,1552,1408}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}
1986/05/19
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Air Starter Relay Valve Improved{1462}
1991/06/24
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
New Service Seal Used In Altronic III Magnetos{1552}
1992/11/23
Tachometer Drive Shaft Rotation{1085}
1993/08/09
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Magazine
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
New Coolant Level Sensor Available {7422}
2001/02/01
Correction to Troubleshooting , "GSC CID 0190 - FMI 02" {1907}
2002/07/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Specifications
Magnetic Pickup
6.25" BORE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
New Coolant Level Switch Used{7470,1354}
1982/10/18
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New &quot;Two Inch&quot; Gauges, Indicator And Senders Available{7450}
1986/06/02
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Engine News
Check Valve Added To Hydramechanical Shut-Off
1980/11/12
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Specifications
Shut-Off Valve (Water Temperature)<BR> (4L7108)
6.25" BORE ENGINE ATTACHMENTS
Shut-Off Valve (Air Inlet)<BR> (2N9924, 7L5536)
6.25" BORE ENGINE ATTACHMENTS
Shut-Off Solenoids
6.25" BORE ENGINE ATTACHMENTS
Service Magazine
Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tachometer Drive Shaft Rotation{1085}
1993/08/09
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Adjust Bosch Solenoid If Replaced Or Reinstalled
1988/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
New Solenoid Valve for Certain Gas Engines {5479}
New Solenoid Valve for Certain Gas Engines {5479}
Specifications
Starter Solenoids
G379, G398 & G399 ENGINES
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
Tachometer Drive Shaft Rotation{1085}
1993/08/09
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Air Starter Relay Valve Improved{1462}
1991/06/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Air Starting Motor Group Available
1982/08/25
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Air Valves For Air Starting System
6.25" BORE ENGINE ATTACHMENTS
Air Starting Motors<BR> (3H3170, 3H3171)
6.25" BORE ENGINE ATTACHMENTS
Starter Motor
G379, G398 & G399 ENGINES
Starter Solenoids
G379, G398 & G399 ENGINES
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Air Starting Motor
6.25" BORE ENGINE ATTACHMENTS
Electric Starting Motors
G379, G398 & G399 ENGINES
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Air Starting Motor Group Available{1451}
1982/07/19
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
New Start Switch Used {1416,1453}
1986/07/07
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Engine News
New Dual Speed Switch Is Now Available
1981/10/21
New Coolant Level Switch Used
1982/10/20
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
New Start Switch Used
1986/07/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Special Installation Instructions for the 379-3359 Speed Switch Assembly {1400, 1915, 7400, 7426, 7451}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Pressure Switches
6.25" BORE ENGINE ATTACHMENTS
Contactor Switches (Water Temperature)
6.25" BORE ENGINE ATTACHMENTS
Overspeed Contactor Switch
6.25" BORE ENGINE ATTACHMENTS
Contactor Switches<BR> (Oil Pressure)
6.25" BORE ENGINE ATTACHMENTS
Oil Pressure Switches
G379, G398 & G399 ENGINES
Magnetic Switch
G379, G398 & G399 ENGINES
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Coolant Level Switch Used{7470,1354}
1982/10/18
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
New Start Switch Used {1416,1453}
1986/07/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
Engine News
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Tool Operating Manual
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Troubleshooting
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Tools
Starting Motor - Delco 50-MT
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Timing Light Group Helps Adjust Timing for Spark Ignited Engines {0712, 0785}
2004/03/29
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
New Coil Kits Replace Shielded Transformer{1554,1561}
1998/10/01
Specifications
Transformers
G379, G398 & G399 ENGINES
Engine News
A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
2004/07/01
Specifications
Air Valves For Air Starting System
6.25" BORE ENGINE ATTACHMENTS
Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box
1992/10/01
Service Magazine
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Air Starter Relay Valve Improved{1462}
1991/06/24
Relay Replacement Kits Available To Replace Relays In Engine Mounted Junction Box{1423,1422}
1992/11/09
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Horizontally Mounted Jacket Water Heater Now Used
1987/05/01
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/02/16
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Engine News
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Truck sale:

1980 CAT G398
USD $50,000 
1980 CAT G398

Foley Equipment Company
Topeka Area, Kansas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.