9M1662 ELECTRIC STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 2 Effective with Serial No. 61H1933. Part of Starting Motor shown on Page 45 955K

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

0. 9M-1662 ELECTRIC S

SWITCH GP

1. 4M-1812 SWITCH AS-

GLOW PLUG GP

2. 5S-9912 GLOW PLUG

LIGHTING GP

3. 8M-7677 LAMP GP-DA
4. 9M-1305 LAMP GP

BATTERY GP

5. BATTERY AN
6. BATTERY AN
7. BATTERY AN
8. WIRING DIA

SWITCH GP

9. 7H-7290 SWITCH AS-
0. INFORMATION

TRACK LOADER 955K TRACK LOADER 61H
955K TRAXCAVATOR 61H00001-UP (MACHINE) UE070039 955K 61H (1966)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

3S-3572 STARTING MOTOR

9M-1662 ELECTRIC STARTING MOTOR ASSEMBLY

9H-3675 ELECTRIC STARTER GROUP

7M-7783 ELECTRIC STARTING MOTOR ASSEMBLY

#UE0700390060

9M-1662: ELECTRIC STARTING MOTOR ASSEMBLY

ELECTRIC STARTING MOTOR ASSEMBLY

9M1662 ELECTRIC STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 2
Effective with Serial No. 61H1933. Part of Starting Motor shown on Page 45

c113191 UE070039

9M1662 ELECTRIC STARTING MOTOR ASSEMBLY Parts scheme

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
4M-1839	[1]	COIL ASSEM.
3L-3380	[1]	BUSHING
4M-1845	[8]	BRUSH ASSEM.
4B-1220	[2]	SCREW (.312" Long)
2F-2860	[6]	SCREW (.375" Long)
3B-4501	[8]	LOCKWASHER
4B-1221	[3]	SCREW
8H-0878	[3]	LOCKWASHER
7F-3529	[3]	WASHER
2B-4602	[1]	PLUG
9F-2547	[1]	WICK
3S-2398	[1]	BUSHING
7S-9826	[1]	PLUG
		(Parts of Frame Assem. 4M1844)
2L-8166	[1]	WASHER
4M-1847	[1]	BUSHING
4M-1844	[1]	FRAME ASSEM.
7F-3491	[2]	WASHER
8F-9206	[1]	SEAL
4M-1868	[1]	ARMATURE ASSEM.
4M-1840	[1]	INSULATOR
4M-1850	[1]	HOUSING ASSEM.
4M-1828	[1]	RETAINER
2S-4027	[1]	WASHER
4M-1829	[1]	BOOT
8H-1141	[4]	SHOE
9M-7609	[1]	SPRING
4M-1855	[1]	PLUNGER ASSEM.
4M-1827	[1]	RETAINER
2H-3429	[1]	RING
3F-2617	[1]	NUT
4M-1853	[1]	LEVER ASSEM.
4M-1854	[1]	SHAFT
1H-1023	[1]	SEAL (.369" DIAMETER)
2D-6392	[1]	SEAL (.239"DIAMETER)
2H-3429	[1]	RING
8S-8036	[1]	CLUTCH ASSEM.
2B-4602	[1]	PLUG
9F-2547	[1]	WICK
		(PARTS OF HOUSING ASSEM.4M1850)
4M-1851	[1]	GASKET
4M-1833	[5]	SCREW (1.50" LONG)
7M-0336	[1]	SCREW (.86"LONG)
4L-2729	[1]	WASHER
1M-9968	[1]	BUSHING
2F-6678	[1]	SEAL
		(PARTS OF HOUSING ASSEM.4M1850)
1M-9971	[1]	SPACER
4M-0189	[2]	SEAL
1H-2629	[2]	INSULATOR

#UE0700390061

4M-1812: SWITCH AS-SOLENOID

SWITCH AS-SOLENOID

4M1812 SOLENOID SWITCH ASSEMBLY
Part of 9M1662 Electric Starting Motor Assembly
shown on Pages 46, 46B & 46D

c115620 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4M-1816	[1]	TERMINAL ASSEM.
	4M-1834	[1]	PLATE
2.	7F-4907	[1]	STRIP
3.	3H-3681	[2]	NUT
4.	3B-4508	[4]	LOCKWASHER
5.	3H-3680	[2]	NUT
6.	7F-4909	[2]	WASHER
7.	4M-1836	[2]	INSULATOR
8.	4M-1837	[2]	BUSHING
9.	7F-4906	[1]	STUD (R.H.)
	4M-1835	[1]	STUD (L.H.)
10.	4M-2800	[1]	TERMINAL
11.	9S-4490	[1]	GASKET
12.	4M-5274	[1]	SCREW
13.	1P-3879	[1]	LEAD ASSEM.
14.	4M-3217	[2]	SCREW
15.	4M-1814	[1]	CONTACT ASSEM.
16.	4M-1813	[1]	CASE ASSEM.
17.	1F-0073	[2]	CLIP
18.	4M-1815	[1]	SPRING
19.	9M-7657	[4]	NUT
			-OR-
	9S-4489	[4]	SCREW ASSEM.

#UE0700390062

5S-9912: GLOW PLUG AND WIRING

GLOW PLUG AND WIRING

GLOW PLUG AND WIRING (5S9912 N/S)

c101208 UE070039

5S9912 GLOW PLUG AND WIRING Parts scheme

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-9911	[1]	LEAD ASSEM.
2.	1H-6249	[1]	CLASP
3.	2M-5301	[4]	TERMINAL
			(Parts of 5S9911 Lead Assem.)
4.	4B-4278	[2]	WASHER
5.	1H-5166	[1]	CLIP
6.	4S-7824	[4]	GLOW PLUG

#UE0700390063

8M-7677: LAMP GP-DASH

LAMP GP-DASH

8M7677 DASH LAMP ASSEMBLY--24 VOLT
PART OF BATTERY AND WIRING SHOWN ON PAGE 52

c210961 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9H-4349	[1]	SOCKET & WIRE ASSEM.
2.	3H-2691	[1]	LAMP
3.	5P-5623 H		WIRE .203 m(8.00 in.)
4.	7F-9224	[2]	TERMINAL
	H		ORDER BY THE METRE

#UE0700390064

9M-1305: LAMP GP

LAMP GP

9M1305 DASH LAMP ASSEMBLY--24 VOLT
PART OF BATTERY AND WIRING SHOWN ON PAGE 52

c211053 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9H-4349	[1]	SOCKET AND WIRE ASSEM.
2.	3H-2691	[1]	LAMP
3.	5P-5623 CH		WIRE- .20 m(8 in.)
4.	7F-9224	[2]	TERMINAL
	C		INDICATES CHANGE
	H		ORDER BY THE METER

#UE0700390065

BATTERY AND WIRING

BATTERY AND WIRING--24 VOLT--AS VIEWED FROM RIGHT HAND SIDE OF MACHINE--PART 1 OF 3
SEE PAGE 53 FOR WIRING DIAGRAM
REFER ALSO TO PAGE 117 FOR SPECIAL PARTS

c121947 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-6497	[1]	REGULATOR
2.	9F-6580	[4]	BOLT (1.125" Long)
			-or-
	7B-2742	[4]	BOLT (1.25" Long)
3.	1B-4330	[4]	NUT
4.	3B-4504	[6]	LOCKWASHER
5.	5K-7074	[1]	HARNESS ASSEM.
	5K-7073	[1]	TUBE
6.	9F-5320	[1]	TERMINAL
7.	4K-6494	[1]	TERMINAL
8.	4K-6492	[2]	TERMINAL
9.	4K-6495	[3]	TERMINAL
10.	5K-0786	[1]	TERMINAL
11.	4K-5121	[1]	TERMINAL
12.	5K-0484	[1]	TERMINAL
			(Parts of 5K7074 Harness Assem.)
13.	5K-2856	[1]	TERMINAL STRIP
14.	4B-1230	[4]	SCREW
15.	9F-8125	[4]	LOCKWASHER
16.	4K-6066	[1]	CLIP
17.	6K-0382	[1]	HARNESS ASSEM.
	5K-2013	[1]	TUBE
18.	6H-6756	[1]	TERMINAL
19.	4K-6495	[2]	TERMINAL
20.	6B-2864	[2]	TERMINAL
21.	5K-0786	[1]	TERMINAL
			(Parts of 6K382 Harness Assem.)
22.	4K-5253	[1]	SLEEVE
23.	2B-3243	[1]	CLIP
24.	6K-0384	[1]	HARNESS ASSEM.
	5K-1876	[1]	TUBE
25.	5K-0786	[1]	TERMINAL
26.	4K-6495	[1]	TERMINAL
27.	3K-8671	[1]	TERMINAL
28.	7F-9224	[1]	TERMINAL
			(Parts of 6K384 Harness Assem.)
29.	4K-5179	[1]	BOX
30.	1B-2714	[2]	BOLT
31.	8F-8513	[3]	CLIP
32.	4F-4879	[3]	BOLT
33.	3B-4506	[3]	LOCKWASHER
34.	2D-1247	[1]	CLIP
35.	1K-6705	[2]	BOLT (.50" Long)
			-or-
	0S-1620	[2]	BOLT (1.75" Long)
36.	3B-4508	[2]	LOCKWASHER
			The following Repair Kit is available:
	8M-3146	[1]	KIT (Shockmount)

#UE0700390066

BATTERY AND WIRING

BATTERY AND WIRING--24 VOLT--AS VIEWED FROM RIGHT HAND SIDE OF MACHINE--PART 2 OF 3
SEE PAGE 53 FOR WIRING DIAGRAM
REFER ALSO TO PAGE 117 FOR SPECIAL PARTS

c121948 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4330	[8]	NUT
2.	3B-4504	[8]	LOCKWASHER
3.	4B-5269	[8]	WASHER
4.	4K-6697	[2]	HOLDDOWN ASSEM.
5.	5K-0829	[1]	CABLE ASSEM.
6.	2M-0912	[1]	TERMINAL
7.	2M-0913	[1]	TERMINAL
			(Parts of 5K829 Cable Assem.)
8.	5K-7072	[1]	COVER
9.	1S-0724	[1]	CLIP
10.	0T-0102	[5]	BOLT
11.	3B-4506	[8]	LOCKWASHER
12.	6K-0381	[1]	HOSE
13.	5K-1783	[1]	BRACKET ASSEM.
	9F-6445	[2]	NUT
			(Part of 5K1783 Bracket Assem.)
14.	0S-1594	[1]	BOLT
15.	6K-0383	[1]	WIRE ASSEM.
	4K-6495	[1]	TERMINAL (Terminal Block)
	7B-4826	[1]	INSULATOR
16.	1H-6249	[1]	CLASP
	2D-4107	[1]	INSULATOR
			(Parts of 6K383 Wire Assem.)
17.	4B-4278	[5]	WASHER
18.	5K-6971	[2]	BRACKET ASSEM.
19.	9F-2978	[2]	NUT
			(1 in each 5K6971 Bracket Assem.)
20.	3H-5264	[4]	CLIP
21.	0S-1621	[1]	BOLT
22.	3B-4508	[3]	LOCKWASHER
23.	1B-8074	[1]	WASHER
24.	4K-6502	[1]	FITTING
25.	4K-5253	[1]	SLEEVE
26.	0S-1620	[2]	BOLT
27.	3S-7608	[1]	CLIP
28.	4S-9261	[2]	BATTERY
29.	4K-3087	[2]	MAT
30.	4K-5715	[8]	BOLT
31.	3B-4604	[8]	COTTER PIN
32.	0S-1594	[2]	BOLT
33.	4H-1225	[1]	WASHER
34.	5K-7088	[1]	CABLE ASSEM.
35.	2M-0912	[2]	TERMINAL
			(Part of 5K7088 Cable Assem.)
36.	0T-0102	[1]	BOLT
	3B-4506	[1]	LOCKWASHER

#UE0700390067

BATTERY AND WIRING

BATTERY AND WIRING--24 VOLT--TOP VIEW--PART 3 OF 3
8M7677 AND 9M1305 LAMP, 7H7290 SWITCH AND 5K9348 HARNESS PARTS ARE SHOWN ON PAGES 49 AND 54
SEE PAGE 53 FOR WIRING DIAGRAM. REFER ALSO TO PAGE 117 FOR SPECIAL PARTS

c132765 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5K-9437	[1]	PLATE
2.	5K-7099	[1]	CABLE ASSEM.
	1S-4915	[2]	LINER
	2M-0912	[1]	TERMINAL
3.	5M-9204	[1]	TERMINAL ASSEM. (+)
			(Parts of 5K7099 Assem.)
4.	2D-8788	[1]	BOLT
	2D-8787	[1]	NUT
			(Parts of 5M9204 Assem.)
5.	5K-9375	[1]	CABLE ASSEM.
	5M-9205	[1]	TERMINAL ASSEM. (-)
			(Part of 5K9375 Assem.)
	2D-8788	[1]	BOLT
	2D-8787	[1]	NUT
			(Parts of 5M9205 Assem.)
6.	3D-2098	[1]	TERMINAL ASSEM. (+)
			(Part of 5K9375 Assem.)
7.	2D-8788	[1]	BOLT
	2D-8787	[1]	NUT
			(Parts of 3D2098 Assem.)
8.	1F-7307	[1]	AMMETER
9.	7S-6402	[1]	SWITCH ASSEM.
	7S-5432	[1]	KNOB
			(Part of 7S6402 Assem.)
10.	2S-2342	[1]	SWITCH ASSEM.
	8F-3437	[1]	LEVER
	5L-7200	[1]	SCREW
	3B-4501	[1]	LOCKWASHER
			(Parts of 2S2342 Assem.)
11.	4K-8030	[2]	CLIP
12.	5M-2555	[1]	CIRCUIT BREAKER
13.	3K-9520	[1]	GROMMET
14.	5M-6668	[2]	SCREW
15.	3B-4501	[2]	LOCKWASHER
16.	8F-8513	[1]	CLIP
17.	0S-0509	[1]	BOLT
18.	1D-4717	[1]	NUT
	3B-4506	[1]	LOCKWASHER
19.	6K-6385	[1]	ANGLE
20.	9M-1305	[1]	LAMP ASSEM.
21.	5K-9348	[1]	HARNESS ASSEM.
22.	8M-7677 Y	[1]	LAMP ASSEM.
			(See Separate Illustration)
23.	8H-8648	[1]	PLATE
24.	7H-7290 Y	[1]	SWITCH ASSEM.
			(See Separate Illustration)
25.	5K-2158	[1]	CABLE ASSEM.
26.	2M-0913	[1]	TERMINAL
27.	3D-2098	[1]	TERMINAL ASSEM. (-)
			(Parts of 5K2158 Assem.)
28.	2D-8788	[1]	BOLT
	2D-8787	[1]	NUT
			(Parts of 3D2098 Assem.)
	Y		SEPARATE ILLUSTRATION

#UE0700390068

WIRING DIAGRAM

WIRING DIAGRAM--24 Volt System

UE0700390068 UE070039

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments

#UE0700390069

7H-7290: SWITCH AS-DISCONNECT

SWITCH AS-DISCONNECT

7H7290 DISCONNECT SWITCH ASSEMBLY
Part of Battery and Wiring and 5K7500 Battery and Wiring Group shown on Pages 52 and 142

c112435 UE070039

7H7290 SWITCH AS-DISCONNECT Parts scheme

For full view, you need register

Parts for your 955K TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-5306	[1]	KEY
2.	8H-5303	[1]	NUT
3.	2H-3922	[1]	LOCKWASHER
4.	7F-7259	[4]	LOCKWASHER
5.	6F-7045	[4]	NUT

Information:

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

General Service Information

Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES

Engine News

Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors

Systems Operation

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors

Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors

Testing and Adjusting

No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors

Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors

Troubleshooting

Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Disassembly and Assembly

Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

General Information
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors

Service Magazine

Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
2001/08/13

Improved Remanufactured Heavy-Duty Electrical Starting Motors Are Available {1453}
2001/10/29

Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19

Caterpillar Parts SIS Catalog 955K :

9M-1662 ELECTRIC STARTING MOTOR ASSEMBLY

3S-3572 STARTING MOTOR

3S-1803 GENERATOR

1S-0151 GENERATOR ASSEMBLY

4M-1812 SWITCH AS-SOLENOID

5S-9912 GLOW PLUG AND WIRING

Truck sale:

1978 CAT 955K

Aurteneche
Nanclares De La Oca, ALAVA, Spain

1970 CAT 955K

IRONPEDDLERS PARTS DIVISION
MONROE, North Carolina

USD $8,294

CAT 955K

Tamburnotti Sas di Tamburnotti F. & C.
Caste San Giovanni, PIACENZA, Italy

USD $8,224

1971 CAT 955K

Tamburnotti Sas di Tamburnotti F. & C.
Caste San Giovanni, PIACENZA, Italy

CAT 955K

BLOUNT PARTS & EQUIPMENT