ELECTRICAL AND STARTING SYSTEM
STARTING AID GPFRAME AND BODY
COUNTERWEIGHT GPHOOK GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)IMPLEMENTS
MISCELLANEOUS INFORMATIONFRAME AND BODY
BUMPER GPWORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
#UE0700390250
6K-7629: ETHER STARTING AID GROUP
6K7629 ETHER STARTING AID GROUP
9F740 Discharger parts are shown on Page 150A
9F740 Discharger parts are shown on Page 150A
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9F-0740 Y | [2] | DISCHARGER | |
| (See Separate Illustration) | ||||
| 2. | 6K-7460 | [1] | BRACKET | |
| 3. | 3B-9054 | [2] | FITTING | |
| 4. | 8F-8996 | [2] | NUT | |
| (1 in each 3B9054 Fitting) | ||||
| 5. | 4S-8384 H | TUBE 52" | ||
| 6. | 4S-8384 H | TUBE 56" | ||
| 7. | 5M-1072 | [2] | FITTING | |
| 8F-8996 | [2] | NUT | ||
| H | SOLD BY THE FOOT | |||
| Y | SEPARATE ILLUSTRATION | |||
#UE0700390251
4K-5991: COUNTERWEIGHT GROUP
4K5991 COUNTERWEIGHT GROUP--1780 POUNDS
FOR USE WITH FRONT MOUNTED EQUIPMENT WHEN
REAR IMPLEMENT IS NOT USED
FOR USE WITH FRONT MOUNTED EQUIPMENT WHEN
REAR IMPLEMENT IS NOT USED
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7H-3441 | [2] | STUD | ||
| 2K-0337 | [2] | NUT | ||
| 4B-4283 | [2] | WASHER | ||
| 1M-4980 | [1] | PIN | ||
| 3B-5319 | [1] | COTTER PIN | ||
| 4K-5989 | [1] | COUNTERWEIGHT | ||
| 4K-5990 | [1] | COUNTERWEIGHT | ||
| 6K-2039 | [2] | STUD | ||
| 1B-4332 | [2] | NUT | ||
| 3B-4514 | [2] | NUT | ||
| 2D-4854 | [2] | WASHER | ||
| 4B-4284 | [8] | WASHER | ||
| 3K-8591 | [1] | SUPPORT ASSEM. | ||
| 6K-2039 | [6] | STUD | ||
| 1B-4332 | [6] | NUT | ||
| 3B-4514 | [6] | LOCKWASHER | ||
| 4B-4284 | [6] | WASHER |
#UE0700390252
3B-2665: FRONT PULL HOOK GROUP
3B2665 FRONT PULL HOOK GROUP
FOR USE WITH CRANKCASE GUARD
FOR USE WITH CRANKCASE GUARD
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS#UE0700390253
6K-1339: TOOTH GROUP
6K1339 TOOTH GROUP--SHORT TIP
FOR USE WITH 6K703 SIDE DUMP BUCKET LISTED ON PAGE 156A
FOR USE WITH 6K703 SIDE DUMP BUCKET LISTED ON PAGE 156A
For full view, you need register
#UE0700390254
9K-3880: MOUNTING CONVERSION GROUP
9K3880 MOUNTING CONVERSION GROUP--Field Installation
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K1013 REAR BUMPER GROUP
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K1013 REAR BUMPER GROUP
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-4638 | [4] | BOLT | |
| 2J-3507 | [4] | NUT | ||
| 3K-5234 | [8] | WASHER | ||
| 2. | 9K-3655 | [1] | PLATE ASSEM. | |
| 3. | 1A-8063 | [4] | BOLT | |
| 4. | 2S-0115 | [16] | WASHER | |
| 5. | 6D-4709 | [1] | BELT ASSEM. | |
| 7K-0481 | [2] | ANGLE | ||
| 6. | 8K-9389 | [2] | BAR | |
| 7. | 9K-5000 | [1] | BRACKET ASSEM. (L.H.) | |
| 8. | 9K-5001 | [1] | BRACKET ASSEM. (R.H.) | |
| 9. | 9K-5002 | [1] | PLATE (L.H.) | |
| 9K-5003 | [1] | PLATE (R.H.) | ||
| 10. | 2A-1538 | [4] | BOLT | |
| 11. | 4B-4158 | [8] | SCREW (Drive) | |
| 12. | 1P-2270 | [2] | PLATE (Warning) | |
| 1P-0289 | [2] | PLATE (Warning) | ||
| 8S-5144 | [2] | PLATE (Warning) | ||
| 13. | 8K-9373 | [1] | BRACE ASSEM. (R.H.) | |
| 3J-5169 | [4] | NUT (Weld) | ||
| 14. | 8K-9374 | [1] | BRACE ASSEM. (L.H.) | |
| 3J-5169 | [4] | NUT (Weld) | ||
| 15. | 1A-5822 | [8] | BOLT | |
| 16. | 8S-9092 | [12] | BOLT | |
| 4D-3704 | [12] | WASHER | ||
| 17. | 3D-0427 | [6] | STUD | |
| 2J-3505 | [6] | NUT | ||
| 9H-1031 | [6] | WASHER | ||
| 18. | 8K-9371 | [1] | BRACE ASSEM. (R.H.) | |
| 8K-9372 | [1] | BRACE ASSEM. (L.H.) | ||
| 19. | 9K-5004 | [1] | BRACKET ASSEM. (R.H.) | |
| 20. | 3J-5169 | [2] | NUT (Weld) | |
| 21. | 9K-5005 | [1] | BRACKET ASSEM. (L.H.) | |
| 22. | 3J-5169 | [2] | NUT (Weld) | |
| 23. | 3K-9063 | [2] | WIRE ASSEM. | |
| 2D-8757 | [1] | TERMINAL | ||
| 3F-4505 | [1] | CONNECTOR | ||
| 24. | 2J-3506 | [8] | NUT | |
| 25. | 8K-9881 | [2] | BAR | |
| 26. | 9K-3883 | [1] | GUARD ASSEM. (R.H.) | |
| 9K-3884 | [1] | GUARD ASSEM. (L.H.) | ||
| 27. | 0S-1621 | [8] | BOLT | |
| 4B-4280 | [8] | WASHER | ||
| 28. | 3B-4508 | [16] | LOCKWASHER | |
| 1A-2029 H | [2] | BOLT | ||
| 1B-5355 | [2] | NUT | ||
| 3B-4506 | [2] | LOCKWASHER | ||
| 4B-4278 | [2] | WASHER | ||
| H | NOT SHOWN- MOUNTED FROM REAR S | |||
#UE0700390255
9K-7860: MOUNTING CONVERSION GROUP
9K7860 MOUNTING CONVERSION GROUP--Field Installation Only
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
Note: 9K7517 Support Assembly R.H. and 9K7516 Support Assembly
L.H. are required when this group is required
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
Note: 9K7517 Support Assembly R.H. and 9K7516 Support Assembly
L.H. are required when this group is required
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9K-7419 | [1] | BRACKET ASSEM. (R.H.) | |
| 2. | 9H-7729 | [1] | DOWEL | |
| 3. | 9F-2978 | [3] | NUT | |
| 4. | 9K-7420 | [1] | BRACKET ASSEM. (L.H.) | |
| 5. | 9H-7729 | [1] | DOWEL | |
| 6. | 9F-2978 | [3] | NUT | |
| 7. | 1A-0458 | [16] | BOLT | |
| 3B-4512 | [16] | LOCKWASHER | ||
| 8. | H | [1] | BELT ASSEM. | |
| 9. | 9K-8028 | [2] | BRACKET ASSEM. | |
| 10. | 9K-7407 | [1] | PLATE (R.H.) | |
| 9K-7406 | [1] | PLATE (L.H.) | ||
| 11. | 9K-7393 | [2] | BAR (Front) | |
| 9K-7392 | [2] | BAR (Rear) | ||
| 12. | 1P-2270 | [2] | PLATE (Warning) | |
| 4B-4158 | [8] | SCREW | ||
| 13. | 8K-9389 | [2] | BAR | |
| 14. | 1A-5822 | [8] | BOLT | |
| 15. | 3B-4508 | [10] | LOCKWASHER | |
| 16. | 9F-9522 | [2] | BOLT | |
| 9H-1031 | [2] | LOCKWASHER | ||
| 17. | 9K-7553 | [1] | PLATE | |
| 18. | 9K-7549 | [1] | CORNER ASSEM. (R.H.) | |
| 9F-2978 | [2] | NUT | ||
| 19. | 9K-7550 | [1] | CORNER ASSEM. (L.H.) | |
| 9F-2978 | [1] | NUT | ||
| 20. | 0L-1351 | [8] | BOLT | |
| 3B-4506 | [8] | LOCKWASHER | ||
| 4B-4278 | [8] | WASHER | ||
| 21. | 0S-1595 | [2] | BOLT | |
| 4B-4280 | [2] | WASHER | ||
| 22. | 9K-7546 | [1] | BRACKET ASSEM. | |
| 23. | 9K-7545 | [1] | BLOCK | |
| 24. | 0T-0319 | [1] | BOLT | |
| 25. | 3B-4507 | [3] | LOCKWASHER | |
| 26. | 9K-7544 | [1] | STRIP | |
| 27. | 5K-9519 | [1] | BLOCK | |
| 28. | 1D-4707 | [2] | BOLT | |
| H | FOR USE WITHOUT SUSPENSION SEA | |||
#UE0700390256
9K-1262: MOUNTING CONVERSION GROUP
9K1262 MOUNTING CONVERSION GROUP--Field Installation
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K1013 REAR BUMPER GROUP
Only separate parts serviced. When complete Group is required order 9K3880
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K1013 REAR BUMPER GROUP
Only separate parts serviced. When complete Group is required order 9K3880
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [4] | BOLT | ||
| [4] | NUT | |||
| [8] | WASHER | |||
| 2. | [1] | PLATE ASSEM. | ||
| 3. | [4] | BOLT | ||
| [4] | NUT | |||
| 4. | [12] | WASHER | ||
| 5. | [1] | BELT ASSEM. | ||
| [2] | ANGLE | |||
| 6. | [2] | BAR | ||
| 7. | [1] | BRACKET ASSEM. (R.H.) | ||
| [2] | NUT (Weld) | |||
| 8. | [1] | BRACKET ASSEM. (L.H.) | ||
| [2] | NUT (Weld) | |||
| 9. | [1] | PLATE (R.H.) | ||
| [1] | PLATE (L.H.) | |||
| 10. | [4] | BOLT | ||
| 11. | [8] | SCREW (Drive) | ||
| 12. | [2] | PLATE (Warning) | ||
| [2] | PLATE (Warning) | |||
| [2] | PLATE (Warning) | |||
| 13. | [1] | BRACE ASSEM. (R.H.) | ||
| [4] | NUT (Weld) | |||
| 14. | [1] | BRACE ASSEM. (L.H.) | ||
| [4] | NUT | |||
| 15. | [8] | BOLT | ||
| [4] | LOCKWASHER | |||
| 16. | [12] | BOLT | ||
| [12] | WASHER | |||
| 17. | [6] | STUD | ||
| [6] | NUT | |||
| [6] | WASHER | |||
| 18. | [1] | BRACE ASSEM. (R.H. Rear) | ||
| [1] | BRACE ASSEM. (L.H. Rear) | |||
| 19. | [1] | BRACKET ASSEM. (R.H.) | ||
| 20. | [2] | NUT (Weld) | ||
| 21. | [1] | BRACKET ASSEM. (L.H.) | ||
| 22. | [2] | NUT (Weld) | ||
| 23. | [2] | WIRE ASSEM. | ||
| [1] | TERMINAL | |||
| [1] | CONNECTOR | |||
| H | [2] | BOLT | ||
| [2] | NUT | |||
| [2] | LOCKWASHER | |||
| [4] | WASHER | |||
| H | NOT SHOWN-MOUNTED FROM REAR SH | |||
#UE0700390257
6K-1013: REAR BUMPER GROUP
6K1013 REAR BUMPER GROUP
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS#UE0700390258
5K-8958: TOOTH GROUP
5K8958 TOOTH GROUP--Short Tip
FOR USE WITH MULTI-PURPOSE BUCKET AND 86" WIDE BUCKET ASSEMBLIES
FOR USE WITH MULTI-PURPOSE BUCKET AND 86" WIDE BUCKET ASSEMBLIES
For full view, you need register
#UE0700390259
5K-8959: TOOTH GROUP
5K8959 TOOTH GROUP--LONG TIP
FOR USE WITH 86" WIDE BUCKET ASSEMBLIES
FOR USE WITH 86" WIDE BUCKET ASSEMBLIES
For full view, you need register
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
Service Magazine
