9H5821 FINAL DRIVE GROUP--Lower Half-Part 2 of 2 Serial No. 20J1 to 20J516 inclusive Note: Quantities shown are those required for both R.H. and L.H. sides D4D

9H5821 FINAL DRIVE GROUP--Lower Half-Part 2 of 2
Serial No. 20J1 to 20J516 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides

c97642 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6K-1022	[2]	GEAR (58 TEETH)
3F-1530	[2]	GUARD
1B-4203	[8]	NUT
3B-4506	[8]	LOCKWASHER
4K-6049 R	[4]	SEAL GROUP
9F-5227	[20]	BOLT
6B-6683	[20]	NUT
2A-3710	[10]	LOCK
4K-9559 R	[2]	HUB
1A-2610	[4]	DOWEL
2B-9175	[2]	CUP
2B-9174	[2]	CONE
7H-2742	[2]	NUT
2B-8847	[2]	RING
2B-8093	[2]	PIN
1M-1809	[2]	SHAFT
1M-1940	[2]	GASKET
1M-1941	[2]	PLATE
0S-1585	[44]	BOLT
3B-4508	[44]	LOCKWASHER
4K-0255	[4]	RETAINER ASSEM.
9M-4502	[12]	PIN
		(3 IN EACH RETAINER ASSEM. 4K255)
4K-0212	[4]	RETAINER
2K-2939	[4]	SEAL
4F-6029	[4]	GUARD
5K-1765	[12]	RIVET
		(1/2 OF EACH IN EACH SPROCKET ASSEM. 5K1784 AND 5K5858)
1B-5170	[2]	PLUG
4K-0173	[8]	RING
		(2 IN EACH SEAL GROUP 4K6049)
4F-8396	[2]	GUARD
4B-1322	[12]	SCREW
3B-4504	[12]	LOCKWASHER
5K-1764	[2]	NUT
1J-2176	[4]	SEAL
5K-1784	[2]	SPROCKET ASSEM. (STANDARD)
		NOTE: 1M1777 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
5K-5858	[2]	SPROCKET ASSEM. (SNOW)
		NOTE: 3K3758 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
0S-0509	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0S-0509	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1A-4145	[2]	LOCK
5K-1787	[2]	SEAL
3F-1547	[2]	SEAL
3F-1542	[2]	DOWEL
		(1 IN EACH HOLDER ASSEM. 5K3449)
5K-1752	[2]	CAGE
6B-3223	[2]	CUP
4B-7270	[2]	CONE
3H-2617	[4]	PIN (SPRING)
		(2 IN EACH RETAINER ASSEM. 3F1554)
5K-5887	[2]	KEY
3F-1556	[2]	CAP
2B-8828	[2]	NUT
3F-1552	[8]	SHIM
5B-5821	[4]	PIN
		(2 IN EACH HOLDER ASSEM. 5K3449)
2F-2815	[2]	LOCK
5K-3449	[2]	HOLDER ASSEM.
3F-1554	[2]	RETAINER ASSEM.
3F-1537	[2]	NUT
3F-1536	[2]	LOCK
3F-1548	[2]	BUSHING
		(1 IN EACH SUPPORT ASSEM. 1M1947)
	[12]	BOLT
3B-4508	[12]	LOCKWASHER
3F-1555	[2]	GASKET
1M-1947	[2]	SUPPORT ASSEM.
3B-8486	[2]	FITTING
2M-0122	[4]	DOWEL
4B-1280	[16]	SCREW
3F-1546	[2]	RETAINER
0V-0459	[2]	BOLT
1B-4206	[2]	NUT
3B-4510	[2]	LOCKWASHER
5K-1766	[2]	SEAL
R		REMFG PART MAY BE AVAILABLE

#UE0700520091

6K-4665: FINAL DRIVE GROUP

FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Upper Half-Part 1 of 2
Serial No. 20J517-Up
Note: Quantities shown are those required for both R.H. and L.H. sides

c101378 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
		[20]	BOLT
		[20]	LOCKWASHER
		[2]	COVER
		[12]	BOLT
		[12]	LOCKWASHER
		[2]	SEAL
		[2]	LOCK
		[2]	NUT
		[2]	GASKET
		[4]	BOLT
		[2]	GASKET
		[2]	STOP
		[2]	FLANGE
		[4]	PLUG
		[2]	DRUM
		[2]	CASE
		[4]	CORK
		[8]	STUD
		[2]	PLUG
		[2]	DOWEL
		[2]	GASKET
		[4]	GASKET
		[2]	DOWEL
		[2]	DOWEL
		[2]	CAGE
		[2]	SPACER
		[2]	RACE AND ROLLER ASSEM.
		[2]	RACE (INNER)
		[2]	RACE AND ROLLER ASSEM.
		[2]	RACE (OUTER)
		[2]	PINION (10 TEETH)
		[2]	RACE AND ROLLER ASSEM.
		[2]	RACE (INNER)

#UE0700520092

6K-4665: FINAL DRIVE GROUP

FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Lower Half - Part 2 of 2
Serial No. 20J517-Up
Note: Quantities shown are those required for both R.H. and L.H. sides

c102938 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6K-1022	[2]	GEAR (58 TEETH)
3F-1530	[2]	GUARD
1B-4203	[8]	NUT
3B-4506	[8]	LOCKWASHER
4K-6049 R	[4]	SEAL GROUP
9F-5227	[20]	BOLT
6B-6683	[20]	NUT
2A-3710	[10]	LOCK
6K-4618	[2]	HUB
1A-2610	[4]	DOWEL
4B-9374	[2]	CUP
4B-9373	[2]	CONE
7H-2742	[2]	NUT
2B-8847	[2]	RING
2B-8093	[2]	PIN
6K-4617	[2]	SHAFT
1M-1940	[2]	GASKET
1M-1941	[2]	PLATE
0S-1585	[44]	BOLT
3B-4508	[44]	LOCKWASHER
4K-0255	[4]	RETAINER ASSEM.
9M-4502	[12]	PIN
		(3 IN EACH RETAINER ASSEM. 4K255)
4K-0212	[4]	RETAINER
2K-2939	[4]	SEAL
4F-6029	[4]	GUARD
5K-1765	[12]	RIVET
		(1/2 OF EACH IN EACH SPROCKET ASSEM. 5K1784 AND 5K5858)
1B-5170	[2]	PLUG
4K-0173	[8]	RING
		(2 IN EACH SEAL GROUP 4K6049)
4F-8396	[2]	GUARD
4B-1322	[12]	SCREW
3B-4504	[12]	LOCKWASHER
5K-1764	[2]	NUT
1J-2176	[4]	SEAL
5K-1784	[2]	SPROCKET ASSEM. (STANDARD)
		NOTE: 1M1777 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
5K-5858	[2]	SPROCKET ASSEM. (SNOW)
		NOTE: 3K3758-SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
0S-0509	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0S-0509	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1A-4145	[2]	LOCK
5K-1787	[2]	SEAL
3F-1547	[2]	SEAL
3F-1542	[2]	DOWEL
		(1 IN EACH HOLDER ASSEM. 5K3449)
5K-1752	[2]	CAGE
6B-3223	[2]	CUP
4B-7270	[2]	CONE
3H-2617	[4]	PIN (SPRING)
		(2 IN EACH RETAINER ASSEM. 3F1554)
5K-5887	[2]	KEY
3F-1556	[2]	CAP
2B-8828	[2]	NUT
3F-1552	[8]	SHIM
5B-5821	[4]	PIN
		(2 IN EACH HOLDER ASSEM. 5K3449)
2F-2815	[2]	LOCK
5K-3449	[2]	HOLDER ASSEM.
3F-1554	[2]	RETAINER ASSEM.
3F-1537	[2]	NUT
3F-1536	[2]	LOCK
3F-1548	[2]	BUSHING
		(1 IN EACH SUPPORT ASSEM. 1M1947)
0S-1587	[12]	BOLT
3B-4508	[12]	LOCKWASHER
3F-1555	[2]	GASKET
1M-1947	[2]	SUPPORT ASSEM.
3B-8486	[2]	FITTING
2M-0122	[4]	DOWEL
4B-1280	[16]	SCREW
3F-1546	[2]	RETAINER
0V-0459	[2]	BOLT
1B-4206	[2]	NUT
3B-4510	[2]	LOCKWASHER
5K-1766	[2]	SEAL
R		REMFG PART MAY BE AVAILABLE

#UE0700520093

4K-5027: BRAKE GROUP

BRAKE GROUP

4K5027 BRAKE GROUP--As Viewed from Right Hand Side of Machine

c131011 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-0606	[1]	PIN
		(PART OF SUPPORT ASSEM. 4K5557)
0S-0175	[4]	PIN
3B-4617	[4]	COTTER PIN
3K-4725	[4]	LINK
1M-1789	[2]	LEVER
0S-1585	[8]	BOLT
3B-4508	[8]	LOCKWASHER
3K-4708	[2]	ANCHOR
7H-3908	[4]	PIN
7H-3788	[2]	FORK
7H-3922	[2]	BAND ASSEM.
7H-3926	[2]	BAND ASSEM.
1D-4716	[16]	NUT
3B-4505	[16]	LOCKWASHER
1D-5117	[2]	NUT
3K-4724	[2]	SCREW
4K-6345	[2]	NUT
7B-5054	[32]	RIVET
5H-6030	[4]	LINING
3K-5802	[8]	BOLT
		(1/2 OF EACH IN EACH BAND ASSEM. 7H3922)
5H-6030	[4]	LINING
7B-5054	[32]	RIVET
		(1/2 OF EACH IN EACH BAND ASSEM. 7H3926)
6H-1298	[1]	SPRING
5K-0634	[1]	PIN
		(PART OF PAWL ASSEM. 5K627)
4K-5557	[1]	SUPPORT ASSEM.
9F-2978	[2]	NUT
		(PART OF SUPPORT ASSEM. 4K5557)
0S-1591	[2]	BOLT
3B-4506	[2]	LOCKWASHER
8S-9092	[2]	BOLT
1D-4720	[2]	NUT
4K-5268	[2]	SHAFT
3K-4723	[4]	KEY
5K-0627	[1]	PAWL ASSEM.
5K-0633	[1]	PIN
9S-1315	[2]	PIN
3B-4617	[2]	COTTER PIN
4K-5110	[1]	LEVER (RIGHT HAND)
4K-5622	[1]	LEVER (LEFT HAND)
0S-1585	[2]	BOLT
3K-4709	[1]	LEVER (RIGHT HAND)
3K-4710	[1]	LEVER (LEFT HAND)
1M-1794	[2]	BAND ASSEM.
5H-6030	[4]	LINING
7B-5054	[32]	RIVET
3K-5802	[8]	BOLT
		(1/2 OF EACH IN EACH BAND ASSEM. 1M1794)
3B-8686	[2]	FITTING
9H-4280	[2]	LINING GROUP
		EACH CONSISTING OF A COMPLETE SET OF LININGS AND RIVETS FOR ONE BRAKE.
4K-5213	[1]	PEDAL (RIGHT HAND)
4K-5214	[1]	PEDAL (LEFT HAND)
6K-3475	[1]	RATCHET
4H-4641	[1]	PIN
3B-4617	[1]	COTTER PIN
4K-5284	[2]	ROD ASSEM.
4B-6493	[2]	SPRING
9S-1354	[2]	NUT
9S-1315	[2]	PIN
3B-4617	[2]	COTTER PIN
4K-5563	[2]	END
4K-5251	[2]	BRACKET
0S-1587	[6]	BOLT
3B-4508	[6]	LOCKWASHER
1K-2602	[2]	WASHER
8F-5340	[4]	SEAL
3B-4629	[2]	COTTER PIN
1M-1917	[2]	SHAFT
4F-2926	[4]	BEARING

#UE0700520094

6K-6172: BRAKE LINING GROUP

BRAKE LINING GROUP

6K6172 BRAKE LINING GROUP--2 Required
For Field Replacement of 5H6030 Brake Linings shown on Page 72
AN ATTACHMENT

c122223 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	7B-5054	[48]	RIVET
2.	6K-6170	[6]	LINING (Drilled)

#UE0700520095

4K-5209: MAIN FRAME GROUP

MAIN FRAME GROUP

4K5209 MAIN FRAME GROUP
Serial No. 20J1 to 20J485 inclusive

c91169 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4K-5426	[1]	MAIN FRAME ASSEM. (LEFT HAND)
1F-0748	[1]	NUT (WELD)
4K-8433	[1]	STRIP
		(PARTS OF MAIN FRAME ASSEM. 4K5426)
5K-3304	[1]	BRACKET
1D-4588	[2]	BOLT
9H-1024	[2]	LOCKWASHER
1D-4609	[16]	BOLT
2J-3506	[16]	NUT
5H-1504	[32]	WASHER
1D-4588	[2]	BOLT
9H-1024	[2]	LOCKWASHER
5K-3304	[1]	BRACKET
4K-8433	[1]	STRIP
1F-0748	[1]	NUT (WELD)
		(PARTS OF MAIN FRAME ASSEM. 4K5425)
4K-5425	[1]	MAIN FRAME ASSEM. (RIGHT HAND)
0S-1625	[4]	BOLT
9H-1024	[4]	WASHER
0S-1625	[4]	BOLT
9H-1024	[4]	WASHER
3B-2968	[1]	BOLT
2J-3506	[1]	NUT
5H-1504	[1]	WASHER
4K-5728	[1]	SPACER
1D-4615	[1]	BOLT
5H-1504	[1]	WASHER

#UE0700520096

6K-8756: MAIN FRAME GROUP

MAIN FRAME GROUP

6K8756 MAIN FRAME GROUP
Serial No. 20J486-Up

c122398 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1D-4609	[16]	BOLT
2.	2J-3506	[16]	NUT
3.	5H-1504	[33]	WASHER
4.	6K-8758	[1]	MAIN FRAME ASSEM. (Left Hand)
5.	4K-8433	[1]	STRIP
6.	1F-0748	[1]	NUT (Weld)
			(Parts of 6K8758 Main Frame Assem.)
7.	6K-8738	[2]	BRACKET (Left Hand)
8.	0S-1625	[8]	BOLT
9.	9H-1024	[12]	WASHER
10.	7F-5227	[1]	BOLT
11.	2J-3506	[1]	NUT
12.	6K-8717	[2]	WASHER (.035" Thick)
13.	6K-8716	[2]	WASHER (.065" Thick)
14.	6K-8714	[2]	WASHER (.120" Thick)
15.	1D-4610	[1]	BOLT
16.	6K-5640	[1]	SPACER
17.	6K-8743	[2]	SHIM (.120" Thick)
18.	6K-8744	[2]	SHIM (.065" Thick)
19.	6K-8745	[2]	SHIM (.035" Thick)
20.	1A-8651	[4]	BOLT
21.	6K-8757	[1]	MAIN FRAME ASSEM. (Right Hand)
22.	4K-8433	[1]	STRIP
23.	1F-0748	[1]	NUT (Weld)
			(Parts of 6K8757 Main Frame Assem.)

#UE0700520097

FRONT IDLER

FRONT IDLER
REFER ALSO TO PAGE 92 FOR SPECIAL PARTS

c99938 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-5369	[2]	SUPPORT
0S-1607	[2]	BOLT
1B-4207	[2]	NUT
7B-5494	[2]	LOCK
3B-4512	[2]	LOCKWASHER
1M-1831	[2]	SCREW ASSEM.
3B-8488	[2]	FITTING
9H-7542	[2]	PILOT ASSEM.
9H-7537	[2]	STUD
6H-7768	[2]	SPACER
1B-1067	[2]	WASHER
5K-1686	[2]	SEAT
1B-4210	[2]	NUT
0S-1595	[2]	BOLT
5K-2754	[2]	SPRING
1A-1135	[8]	BOLT
3B-4510	[8]	LOCKWASHER
1M-5391	[2]	STOP
		(Right Hand Outer-Left Hand Inner)
1M-5392	[2]	STOP
		(Right Hand Inner-Left Hand Outer)
9H-4105	[4]	DOWEL
4B-0897	[8]	PLATE
3F-8638	[8]	SPRING ASSEM.
9B-3488	[4]	PLATE ASSEM.
9B-3486	[8]	PIN
		(2 in each Plate Assem. 9B3488)
9B-2289	[8]	PIN
		(2 in each Bushing Assem. 1M4225)
1M-4227	[4]	BUSHING
		(1 in each Bushing Assem. 1M4225)
0S-1588	[24]	BOLT
7B-9457	[12]	LOCK
3K-2866	[2]	IDLER ASSEM.
1M-9431	[4]	ARM
5B-0841	[8]	BOLT
3B-4510	[8]	LOCKWASHER
0S-1594	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0T-0772	[4]	BOLT
4K-9943	[4]	WASHER
5M-5000	[4]	LOCK
0S-1603	[16]	BOLT
3B-4508	[16]	LOCKWASHER
2S-1731	[2]	PLUG
4K-5285	[2]	BEARING
		(Right Hand Outer-Left Hand Inner)
4K-5286	[2]	BEARING
		(Right Hand Inner-Left Hand Outer)
0L-1328	[2]	BOLT
1B-4207	[2]	NUT
7B-5494	[2]	LOCK
3B-4512	[2]	LOCKWASHER
1H-8128	[4]	SEAL (Standard)
		-or-
5K-1770	[4]	SEAL
		(High Temperature Application)
4K-3585	[32]	SHIM
1M-8869	[4]	PLATE
4K-9984	[2]	SHAFT
4F-7952	[4]	SEAL
2M-2858 R	[4]	SEAL GROUP
1M-3097	[8]	SEAL (Rubber)
		(2 in each Seal Group 2M2858)
1M-4225	[4]	BUSHING ASSEM.
R		REMFG PART MAY BE AVAILABLE

#UE0700520098

EQUALIZER SPRING

c112058 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1A-8537	[6]	BOLT
1D-4720	[6]	NUT
3B-4510	[6]	LOCKWASHER
1D-4585	[2]	BOLT
3B-4510	[2]	LOCKWASHER
9M-3424	[2]	SPACER
4K-8947	[1]	EQUALIZER SPRING SERVICE GROUP
4K-9072	[1]	PLATE (WARNING)
		(PART OF EQUALIZER SPRING SERVICE GROUP 4K8947)
4K-7234	[2]	SLEEVE
1D-4621	[2]	BOLT
2H-3790	[2]	NUT
5K-3044	[1]	SADDLE ASSEM.
5K-3042	[1]	PIN
4K-5174	[2]	BEARING
		(PART OF PLATE ASSEM. 4K9271)
7K-6820	[1]	PIN
		(PART OF PLATE ASSEM. 4K9271)
4K-9271	[1]	PLATE ASSEM.
4K-6921	[2]	LINER
		(PART OF EQUALIZER SPRING SERVICE GROUP 4K8947)
4K-9269	[1]	PLATE
4K-4983	[2]	"U" BOLT
5B-0635	[4]	NUT
5H-1504	[4]	WASHER
4K-5089	[2]	"U" BOLT
5B-0635	[4]	NUT
5H-1504	[4]	WASHER
5K-3040	[1]	WASHER
0S-1621	[2]	BOLT
3B-4508	[2]	LOCKWASHER
4K-6366	[3]	CATCH
		(PART OF SADDLE ASSEM 5K3044)

#UE0700520099

TRACK ROLLER FRAME

TRACK ROLLER FRAME
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. AND L.H. SIDES

c91449 UE070052

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1A-1135	[8]	BOLT
3B-4510	[8]	LOCKWASHER
4K-3628	[2]	CAP ASSEM.
3B-2484	[2]	DOWEL
		(1 IN EACH ASSEM. 4K3628)
4B-8629	[4]	BEARING
4K-3633	[1]	BEARING (R.H.)
		(PART OF ASSEM. 4K3629)
4K-3634	[1]	BEARING (L.H.)
		(PART OF ASSEM. 4K3630)
3B-2483	[2]	DOWEL
		(1 IN EACH ASSEM. 4K5347 & 4K5348)
1A-5405	[4]	BOLT
9H-1024	[4]	WASHER
3B-8487	[2]	FITTING
1D-4586	[4]	BOLT
9H-1024	[4]	WASHER
4K-5347	[1]	FRAME ASSEM. (R.H.)
4K-5348	[1]	FRAME ASSEM. (L.H.)
	[1]	BRACE ASSEM.
		(PART OF FRAME ASSEM. 4K5347)
4K-3630	[1]	BRACE ASSEM.
		(PART OF FRAME ASSEM. 4K5348)
1A-1460	[4]	BOLT
3B-4508	[4]	LOCKWASHER
1M-9476	[2]	BRACKET
5K-1723	[2]	PLATE
		(1 IN EACH ASSEM. 4K5347 & 4K5348)
4B-4043	[8]	BOLT
3B-4510	[8]	LOCKWASHER
4K-8922	[12]	ANGLE
2K-7051	[4]	BAR
5K-1904	[2]	SUPPORT ASSEM.
		(1/2 OF EACH IN EACH ASSEM. 4K5347 AND 4K5348)
4K-4780	[4]	STRIP ASSEM.
		(2 IN EACH ASSEM. 4K5347 & 4K5348)
4M-3067	[4]	STRIP
		(1 IN EACH ASSEM. 4K4780)
2B-7558	[34]	CORK
1H-2162	[20]	PLATE
		(10 IN EACH ASSEM. 4K5348)

Information:

POWER TRAIN

DRIVE GP-FINAL

Special Instruction

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}

Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}

Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Service Magazine

Use 6V4032 Adapter Plate During Preload Adjustment Of Final Drive Bearings{4066,4074,4054,4053,0626}
1981/04/20

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D4D :

9H-5821 FINAL DRIVE GROUP

6K-2176 STEERING CLUTCH CASE ASSEMBLY

6K-4664 STEERING CLUTCH CASE AND COVERS GROUP

4K-5036 STEERING CLUTCH CASE AND COVERS GROUP

STEERING CLUTCH CONTROL

6K-4665 FINAL DRIVE GROUP

4K-5027 BRAKE GROUP

6K-6172 BRAKE LINING GROUP

4K-5209 MAIN FRAME GROUP

6K-8756 MAIN FRAME GROUP

FRONT IDLER

EQUALIZER SPRING

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch