BASIC ENGINE
PISTON & ROD GPDRIVE GP-PUMP
DRIVE GP-ACCESSORY
AIR COMPRESSOR GP
BASIC ENGINE
PISTON & ROD GP#UE0700900060
9S-8912: PISTON & ROD GP
CONNECTING ROD AND PISTON (9S8912 N/S)--6 Required
Serial No. 76J3096, 76J3115 to 76J3121, 76J3125, 76J3126, 76J3131 to
76J3137 & 76J3139-Up and 30K1147-Up.
Serial No. 76J3096, 76J3115 to 76J3121, 76J3125, 76J3126, 76J3131 to
76J3137 & 76J3139-Up and 30K1147-Up.
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7N-9804 C | [1] | PIN | |
2. | 9H-4015 | [2] | RETAINER | |
3. | 6N-8061 C | [1] | ROD ASSEM. | |
7S-9347 | [1] | BEARING | ||
4. | 1P-9956 | [2] | BOLT | |
5S-6348 | [2] | NUT | ||
5. | 7M-7821 | [1] | BEARING (Standard) | |
2S-0502 | [1] | BEARING (.010" Undersize) | ||
2S-0503 | [1] | BEARING (.020" Undersize) | ||
7M-7826 | [1] | BEARING (.030" Undersize) | ||
6. | 8N-3183 C | [1] | PISTON GROUP | |
7. | 9S-7788 | [1] | RING (Oil) | |
8. | 5S-6750 | [1] | RING (Intermediate) | |
9. | 7S-8378 | [1] | RING (Top) | |
7S-9404 | [1] | RING GROUP | ||
(Consists of Complete Set of Rings For One Piston) | ||||
C | INDICATES CHANGE |
#UE0700900061
1S-0330: HYDRAULIC PUMP DRIVE
HYDRAULIC PUMP DRIVE (1S330 N/S)
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1S-7403 | [1] | CAGE ASSEM. | |
2. | 5S-8543 | [1] | BEARING | |
3. | 1S-7408 | [1] | SEAL | |
4. | 1B-4203 | [6] | NUT | |
3B-4506 | [6] | LOCKWASHER | ||
5. | 3S-4125 | [1] | SHAFT | |
6. | 6F-4855 | [1] | SEAL | |
7. | 9M-2575 | [1] | GEAR ASSEM. (57 Teeth) | |
8. | 9M-2418 | [1] | BEARING | |
9. | 0S-1585 | [1] | BOLT (1.50" long) | |
10. | 1S-1767 | [1] | LOCK | |
11. | 2B-0947 | [1] | BOLT (2.25" long) | |
12. | 1S-1750 | [1] | GEAR ASSEM. (65 Teeth) | |
13. | 4F-6024 | [1] | DOWEL |
#UE0700900062
5S-8056: ACCESSORY DRIVE AND PRIMARY FUEL FILTER
ACCESSORY DRIVE AND PRIMARY FUEL FILTER (5S8056 N/S)
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-9575 | [ 2] | BOLT | |
2. | 3B-4505 | [ 7] | LOCKWASHER | |
3. | 8H-9220 | [ 1] | GASKET | |
4. | 7S-5045 | [ 1] | HOUSING ASSEM. | |
5. | 9F-2247 | [ 1] | PLUG | |
6. | 2H-1190 | [ 2] | DOWEL | |
7. | 5M-6214 | [ 2] | PLUG | |
8. | 2D-6642 | [ 1] | BALL | |
9. | 2A-3348 | [ 1] | DOWEL | |
10. | 8H-9788 | [ 1] | GASKET | |
11. | 8H-9787 | [ 1] | COVER | |
12. | 1A-9136 | [ 2] | BOLT | |
13. | 8H-9364 | [ 1] | GASKET | |
14. | 7S-5047 | [ 1] | SHAFT | |
15. | 8H-9789 | [ 1] | BEARING | |
16. | 8H-9718 | [ 1] | RETAINER | |
17. | 7M-9763 | [ 2] | LOCK | |
18. | 0S-1594 | [ 4] | BOLT | |
19. | 5S-3828 | [ 1] | SLEEVE | |
20. | 5S-7614 | [ 1] | GEAR (80 Teeth) | |
21. | 7S-9847 | [ 1] | WASHER | |
22. | 9S-1313 | [ 1] | NUT | |
23. | 2H-3755 | [ 2] | BOLT | |
24. | 2F-6156 | [ 1] | LOCK | |
25. | 5S-7612 | [ 1] | PLATE | |
26. | 5S-7660 | [ 1] | GEAR ASSEM. (57 Teeth) | |
27. | 5S-7630 | [ 1] | BEARING | |
28. | 5B-9079 | [ 1] | NUT | |
29. | 0L-1351 | [ 2] | BOLT | |
30. | 5S-7611 | [ 1] | LOCK | |
31. | 5S-7608 | [ 1] | SHAFT | |
32. | 9H-2769 | [ 1] | BOWL | |
33. | 9H-2770 | [ 1] | GASKET | |
34. | 5S-7645 | [ 1] | ELEMENT ASSEM. | |
35. | 4D-0322 | [ 1] | BAIL ASSEM. | |
36. | 0S-1618 | [ 3] | BOLT | |
37. | 9L-2796 | [ 1] | BOLT |
#UE0700900063
8S-0894: AIR COMPRESSOR ASSEMBLY
8S894 AIR COMPRESSOR ASSEMBLY
Serial No. 76J1 to 76J1320, 76J1334, and 76J1365 inclusive &
30K1 to 30K830 & 30K834 inclusive. Part of Air Compressor shown on Page 30C
Serial No. 76J1 to 76J1320, 76J1334, and 76J1365 inclusive &
30K1 to 30K830 & 30K834 inclusive. Part of Air Compressor shown on Page 30C
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8S-4583 | [8] | BOLT | |
2. | 8S-4365 | [1] | FITTING | |
1S-7107 | [1] | GASKET | ||
3. | 8S-4581 | [1] | HEAD ASSEM. | |
4. | 8S-7599 | [2] | SEAT | |
(Part of 8S4581 Head Assem.) | ||||
5. | 1A-2850 | [2] | STUD | |
1B-4202 | [2] | NUT | ||
6. | 4L-7318 | [10] | LOCKWASHER | |
7. | 9M-0397 | [1] | FITTING | |
9M-0385 | [1] | PLATE | ||
6L-1884 | [2] | GASKET | ||
8. | 2B-2695 | [2] | BOLT | |
9. | 3J-5390 | [2] | PLUG | |
10. | 8S-1982 | [1] | GASKET | |
11. | 8S-4582 | [1] | BLOCK ASSEM. | |
12. | 3K-5762 | [1] | PLUG | |
13. | 9M-0382 | [2] | BUSHING | |
14. | 9M-0381 | [2] | SEAT | |
(Parts of 8S4582 Block Assem.) | ||||
15. | 8S-3921 | [1] | GOVERNOR ASSEM. | |
9M-0402 | [1] | KIT (Governor Overhaul) | ||
(Includes Grommets, Valves, Springs, Filters and Seal) | ||||
16. | 2S-2923 | [1] | COVER | |
(Part of 8S3921 Governor Assem.) | ||||
17. | 9M-0378 | [2] | BOLT | |
18. | 6L-1883 | [1] | GASKET | |
19. | 0L-1351 | [6] | BOLT | |
20. | 3B-4506 | [6] | LOCKWASHER | |
21. | 8S-1978 | [1] | COVER ASSEM. | |
22. | 1S-9867 | [1] | BEARING | |
(Part of 8S1978 Cover Assem.) | ||||
23. | 5M-6214 | [1] | PLUG | |
24. | 4M-0061 | [4] | BOLT | |
25. | 5M-6509 | [1] | SEAL | |
26. | 4M-5281 | [6] | BOLT | |
3B-4504 | [6] | LOCKWASHER | ||
27. | 3H-5175 | [1] | GASKET | |
28. | 8S-1979 | [1] | CRANKCASE ASSEM. | |
29. | 1S-9867 | [1] | BEARING | |
(Part of 8S1979 Crankcase Assem.) | ||||
30. | 1S-9873 | [2] | ROD ASSEM. | |
31. | 9M-5181 | [4] | BOLT | |
2A-5328 | [4] | LOCK | ||
(2 each in 1S9873 Rod Assem.) | ||||
32. | 5S-5267 | [2] | BEARING | |
33. | 1S-9949 | [2] | BEARING (2 halves) | |
(1 each in 1S9873 Rod Assem.) | ||||
34. | 5S-5268 | [1] | BEARING (.010" undersize 2 halves) | |
5S-5269 | [1] | BEARING (.020" undersize 2 halves) | ||
5S-5270 | [1] | BEARING (.030" undersize 2 halves) | ||
35. | 8S-1981 | [1] | CRANKSHAFT | |
36. | 9L-1518 | [2] | WASHER | |
37. | 1F-0006 | [1] | GASKET | |
38. | 9M-0380 | [2] | LOCK | |
39. | 3S-0914 | [2] | PISTON ASSEM. | |
40. | 1S-9875 | [1] | KIT (Piston Ring includes 8 Rings) |
#UE0700900064
8S-0894: AIR COMPRESSOR ASSEMBLY
8S894 AIR COMPRESSOR ASSEMBLY
Serial No. 76J1321 to 76J1333, 76J1335 to 76J1364 & 76J1366 to 76J2861
inclusive and 30K831 to 30K833, 30K835 to 30K1100 & 30K1111 inclusive
Part of Air Compressor shown on Page 30C
Serial No. 76J1321 to 76J1333, 76J1335 to 76J1364 & 76J1366 to 76J2861
inclusive and 30K831 to 30K833, 30K835 to 30K1100 & 30K1111 inclusive
Part of Air Compressor shown on Page 30C
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8S-4583 | [8] | BOLT | |
2. | 8S-4365 | [1] | FITTING | |
1S-7107 | [1] | GASKET | ||
3. | 8S-4581 | [1] | HEAD ASSEM. | |
4. | 8S-7599 | [2] | SEAT | |
(Part of 8S4581 Head Assem.) | ||||
5. | 1A-2850 | [2] | STUD | |
1B-4202 | [2] | NUT | ||
6. | 4L-7318 | [10] | LOCKWASHER | |
7. | 9M-0397 | [1] | FITTING | |
9M-0385 | [1] | PLATE | ||
6L-1884 | [2] | GASKET | ||
8. | 2B-2695 | [2] | BOLT | |
9. | 3J-5390 | [2] | PLUG | |
10. | 8S-1982 | [1] | GASKET | |
11. | 8S-4582 | [1] | BLOCK ASSEM. | |
12. | 3K-5762 | [1] | PLUG | |
13. | 9M-0382 | [2] | BUSHING | |
14. | 9M-0381 | [2] | SEAT | |
(Parts of 8S4582 Block Assem.) | ||||
15. | 9M-0399 C | [1] | GOVERNOR ASSEM. | |
9M-0402 | [1] | KIT (Governor Overhaul) | ||
(Includes Grommets, Valves, Springs, Filters and Seal) | ||||
16. | 2S-2923 | [1] | COVER | |
(Part of 9M399 Governor Assem.) | ||||
17. | 1F-4111 C | [2] | BOLT | |
18. | 6L-1883 C | [2] | GASKET | |
19. | 0L-1351 | [6] | BOLT | |
3B-4506 | [6] | LOCKWASHER | ||
20. | 9S-1784 C | [1] | SPACER | |
21. | 8S-1978 | [1] | COVER ASSEM. | |
22. | 1S-9867 | [1] | BEARING | |
(Part of 8S1978 Cover Assem.) | ||||
23. | 5M-6214 | [1] | PLUG | |
24. | 4M-0061 | [4] | BOLT | |
25. | 5M-6509 | [1] | SEAL | |
26. | 4M-5281 | [6] | BOLT | |
3B-4504 | [6] | LOCKWASHER | ||
27. | 3H-5175 | [1] | GASKET | |
28. | 8S-1979 | [1] | CRANKCASE ASSEM. | |
29. | 1S-9867 | [1] | BEARING | |
(Part of 8S1979 Crankcase Assem.) | ||||
30. | 1S-9873 | [2] | ROD ASSEM. | |
31. | 9M-5181 | [4] | BOLT | |
2A-5328 | [4] | LOCK | ||
(2 each in 1S9873 Rod Assem.) | ||||
32. | 1S-9949 CH | [4] | BEARING | |
(2 each in 1S9873 Rod Assem.) | ||||
33. | 5S-5268 H | [2] | BEARING (.010" undersize) | |
5S-5269 CH | [2] | BEARING (.020" undersize) | ||
5S-5270 H | [2] | BEARING (.030" undersize) | ||
34. | 8S-1981 | [1] | CRANKSHAFT | |
35. | 9L-1518 | [2] | WASHER | |
36. | 1F-0006 | [1] | GASKET | |
37. | 9M-0380 | [2] | LOCK | |
38. | 3S-0914 | [2] | PISTON ASSEM. | |
39. | 1S-9875 | [1] | KIT (Piston Ring includes 8 Rings) | |
1S-9874 | [1] | KIT (Air Compressor Valve) | ||
(Consists of Element, Gaskets, Guides, PISTONS, PLUNGERS, SADDLE, SEAL, SEAT, SPRINGS AND VALVES) | ||||
C | INDICATES CHANGE FROM PREVIOUS | |||
H | TWO OF PARK MARKED H ARE REQUI |
#UE0700900065
9S-9743: AIR COMPRESSOR ASSEMBLY
9S9743 AIR COMPRESSOR ASSEMBLY
Serial No. 76J2862 to 5962, 5964 to 5967, 5973, 5974 & 76J5978 inclusive
and 30K1101 to 1110, 1112 to 1546, 1550, 1553 & 30K1561 to 30K1566 inclusive
Part of Air Compressor shown on Page 30F
Serial No. 76J2862 to 5962, 5964 to 5967, 5973, 5974 & 76J5978 inclusive
and 30K1101 to 1110, 1112 to 1546, 1550, 1553 & 30K1561 to 30K1566 inclusive
Part of Air Compressor shown on Page 30F
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8S-4583 | [8] | BOLT | |
2. | 8S-4365 | [1] | FITTING | |
1S-7107 | [1] | GASKET | ||
3. | 8S-4581 | [1] | HEAD ASSEM. | |
4. | 8S-7599 | [2] | SEAT | |
(Part of 8S4581 Head Assem.) | ||||
5. | 1A-2850 | [2] | STUD | |
1B-4202 | [2] | NUT | ||
6. | 4L-7318 | [10] | LOCKWASHER | |
7. | 9M-0397 | [1] | FITTING | |
9M-0385 | [1] | PLATE | ||
6L-1884 | [2] | GASKET | ||
8. | 2B-2695 | [2] | BOLT | |
9. | 3J-5390 | [2] | PLUG | |
10. | 8S-1982 | [1] | GASKET | |
11. | 8S-4582 | [1] | BLOCK ASSEM. | |
12. | 3K-5762 | [1] | PLUG | |
13. | 9M-0382 | [2] | BUSHING | |
14. | 9M-0381 | [2] | SEAT | |
(Parts of 8S4582 Block Assem.) | ||||
15. | 7S-4340 | [1] | GOVERNOR ASSEM. | |
9M-0402 | [1] | KIT (Governor Overhaul) | ||
(Includes Grommets, Valves, Springs, Filters and Seal) | ||||
16. | 2S-2923 | [1] | COVER | |
(Part of 7S4340 Assem.) | ||||
17. | 1F-5842 | [2] | BOLT | |
18. | 6L-1883 | [2] | GASKET | |
19. | 0L-1351 | [6] | BOLT | |
3B-4506 | [6] | LOCKWASHER | ||
20. | 9S-1784 | [1] | SPACER | |
21. | 8S-1978 | [1] | COVER ASSEM. | |
22. | 1S-9867 | [1] | BEARING | |
(Part of 8S1978 Cover Assem.) | ||||
23. | 5M-6214 | [1] | PLUG | |
24. | 4M-0061 | [4] | BOLT | |
25. | 5M-6509 | [1] | SEAL | |
26. | 4M-5281 | [6] | BOLT | |
3B-4504 | [6] | LOCKWASHER | ||
27. | 3H-5175 | [1] | GASKET | |
28. | 9S-9740 | [1] | CRANKCASE ASSEM. | |
29. | 1S-9867 | [1] | BEARING | |
(Part of 9S9740 Crankcase Assem.) | ||||
30. | 1S-9873 | [2] | ROD ASSEM. | |
31. | 9M-5181 | [4] | BOLT | |
2A-5328 | [4] | LOCK | ||
(2 each in 1S9873 Rod Assem.) | ||||
32. | 1S-9949 H | [4] | BEARING | |
(2 each in 1S9873 Rod Assem.) | ||||
33. | 5S-5268 H | [2] | BEARING (.010" undersize) | |
5S-5269 H | [2] | BEARING (.020" undersize) | ||
5S-5270 H | [2] | BEARING (.030" undersize) | ||
34. | 8S-1981 | [1] | CRANKSHAFT | |
35. | 9L-1518 | [2] | WASHER | |
36. | 1F-0006 | [1] | GASKET | |
37. | 9M-0380 | [2] | LOCK | |
38. | 3S-0914 | [2] | PISTON ASSEM. | |
39. | 1S-9875 | [1] | KIT (Piston Ring includes 8 Rings) | |
1S-9874 | [1] | KIT (Air Compressor Valve) | ||
(Consists of Element, Gaskets, Guides, Pistons, Plungers, Saddle, Seal, SEAT, SPRINGS AND VALVES) | ||||
H | TWO OF PART MARKED H ARE REQUI |
#UE0700900066
8S-0895: AIR COMPRESSOR
AIR COMPRESSOR (8S895 N/S)
Serial No. 76J1 to 76J1320, 76J1334 & 76J1365 inclusive & 30K1 to
30K830 & 30K834 inclusive. 8S894 Air Compressor parts are shown on Page 30
Serial No. 76J1 to 76J1320, 76J1334 & 76J1365 inclusive & 30K1 to
30K830 & 30K834 inclusive. 8S894 Air Compressor parts are shown on Page 30
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1F-1480 | [1] | FITTING | |
8F-8997 | [1] | NUT | ||
(Part of 1F1480 Fitting) | ||||
2. | 8S-0892 | [1] | TUBE (10.66" Long Outlet) | |
3. | 8B-4509 | [3] | FITTING | |
8F-8997 | [3] | NUT | ||
(1 in each 8B4509 Fitting) | ||||
4. | 7S-5864 | [1] | TUBE (22.68" Long Inlet) | |
5. | 1L-0909 | [1] | FITTING | |
6H-3137 | [1] | NUT | ||
6H-3136 | [1] | SLEEVE | ||
(Parts of 1L909 Fitting) | ||||
6. | 8S-0893 | [1] | TUBE (16.88" Long Inlet) | |
7. | 9B-3582 | [1] | FITTING | |
8F-9362 | [1] | NUT | ||
(Part of 9B3582 Fitting) | ||||
8. | 3B-8995 | [1] | FITTING | |
1F-1344 | [1] | NUT | ||
(Part of 3B8995 Fitting) | ||||
9. | 1H-7922 | [1] | FITTING | |
1F-1344 | [1] | NUT | ||
(Part of 1H7922 Fitting) | ||||
10. | 8S-3600 | [1] | TUBE (9.28" Long Oil Supply) | |
11. | 8S-0894 Y | [1] | AIR COMPRESSOR ASSEM. | |
(See Separate Illustration) | ||||
12. | 5S-9594 | [1] | GASKET | |
13. | 1A-5822 | [3] | BOLT | |
3D-0472 | [1] | STUD | ||
1D-5117 | [1] | NUT | ||
3B-4508 | [4] | LOCKWASHER | ||
14. | 1D-5120 | [1] | NUT | |
7S-6774 | [1] | LOCK | ||
15. | 7S-6773 | [1] | GEAR (36 Teeth) | |
Y | SEPARATE ILLUSTRATION |
#UE0700900067
8S-0895: AIR COMPRESSOR
AIR COMPRESSOR (8S895 N/S)
Serial No. 76J1321 to 76J1333, 76J1335 to 76J1364 & 76J1366 to 76J2861
inclusive & 30K831 to 30K833, 30K835 to 30K1100 and 30K1111 inclusive
8S894 Air Compressor parts are shown on Page 30A
Serial No. 76J1321 to 76J1333, 76J1335 to 76J1364 & 76J1366 to 76J2861
inclusive & 30K831 to 30K833, 30K835 to 30K1100 and 30K1111 inclusive
8S894 Air Compressor parts are shown on Page 30A
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1F-1480 C | [3] | FITTING | |
8F-8997 | [3] | NUT | ||
(1 in each 1F1480 Fitting) | ||||
2. | 8S-0892 | [1] | TUBE (10.66" Long Outlet) | |
3. | 8B-4509 C | [1] | FITTING | |
8F-8997 | [1] | NUT | ||
(Part of 8B4509 Fitting) | ||||
4. | 7S-5864 | [1] | TUBE (22.68" Long Inlet) | |
5. | 1L-0909 | [1] | FITTING | |
6H-3137 | [1] | NUT | ||
6H-3136 | [1] | SLEEVE | ||
(Parts of 1L909 Fitting) | ||||
6. | 8S-9493 C | [1] | TUBE (21.63" Long Inlet) | |
7. | 9B-3582 | [1] | FITTING | |
8F-9362 | [1] | NUT | ||
(Part of 9B3582 Fitting) | ||||
8. | 3B-8995 | [1] | FITTING | |
1F-1344 | [1] | NUT | ||
(Part of 3B8995 Fitting) | ||||
9. | 1H-7922 | [1] | FITTING | |
1F-1344 | [1] | NUT | ||
(Part of 1H7922 Fitting) | ||||
10. | 8S-3600 | [1] | TUBE (9.28" Long Oil Supply) | |
11. | 8S-0894 H | [1] | AIR COMPRESSOR ASSEM. | |
12. | 5S-9594 | [1] | GASKET | |
13. | 1A-5822 | [3] | BOLT | |
3B-4508 | [3] | LOCKWASHER | ||
14. | 3D-0472 | [1] | STUD | |
1D-5117 | [1] | NUT | ||
9B-0453 C | [1] | LOCKWASHER | ||
15. | 1D-5120 | [1] | NUT | |
7S-6774 | [1] | LOCK | ||
16. | 7S-6773 | [1] | GEAR (36 Teeth) | |
C | INDICATES CHANGE FROM PREVIOUS | |||
H | SEE SEPARATE ILLUSTRATION |
#UE0700900068
4N-3927: COMPRESSOR AS
4N3927 AIR COMPRESSOR ASSEMBLY--Type 1
Serial No. 76J5963, 5968 to 5972, 5975 to 5977 & 76J5979-Up
and 30K1547 to 1549, 1551, 1552, 1554 to 1560 & 30K1567-Up
Part of Air Compressor shown on Page 31
Serial No. 76J5963, 5968 to 5972, 5975 to 5977 & 76J5979-Up
and 30K1547 to 1549, 1551, 1552, 1554 to 1560 & 30K1567-Up
Part of Air Compressor shown on Page 31
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8S-4583 | [8] | BOLT | |
2. | 8S-4365 | [1] | FITTING | |
1S-7107 | [1] | GASKET | ||
3. | 8S-4581 | [1] | HEAD ASSEM. | |
4. | 8S-7599 | [2] | SEAT | |
5. | 1A-2850 | [2] | STUD | |
1B-4202 | [2] | NUT | ||
6. | 4L-7318 | [10] | LOCKWASHER | |
7. | 9M-0397 | [1] | FITTING | |
9M-0385 | [1] | PLATE | ||
6L-1884 | [2] | GASKET | ||
8. | 2B-2695 | [2] | BOLT | |
9. | 3J-5390 | [2] | PLUG | |
10. | 8S-1982 | [1] | GASKET | |
11. | 8S-4582 | [1] | BLOCK ASSEM. | |
12. | 3K-5762 | [1] | PLUG | |
13. | 9M-0382 | [2] | BUSHING | |
14. | 9M-0381 | [2] | SEAT | |
15. | 4N-3926 | [1] | GOVERNOR ASSEM. | |
9M-0402 | [1] | KIT (Governor Overhaul) | ||
(Includes Grommets, Valves, Springs, Filters and Seal) | ||||
16. | 2S-2923 | [1] | COVER | |
17. | 1F-5842 | [2] | BOLT | |
18. | 6L-1883 | [2] | GASKET | |
19. | 0L-1351 | [6] | BOLT | |
3B-4506 | [6] | LOCKWASHER | ||
20. | 9S-1784 | [1] | SPACER | |
21. | 8S-1978 | [1] | COVER ASSEM. | |
22. | 1S-9867 | [1] | BEARING | |
23. | 5M-6214 | [1] | PLUG | |
24. | 4M-0061 | [4] | BOLT | |
25. | 5M-6509 | [1] | SEAL | |
26. | 4M-5281 | [6] | BOLT | |
3B-4504 | [6] | LOCKWASHER | ||
27. | 3H-5175 | [1] | GASKET | |
28. | 9S-9740 | [1] | CRANKCASE ASSEM. | |
29. | 1S-9867 | [1] | BEARING | |
30. | 1S-9873 | [2] | ROD ASSEM. | |
31. | 9M-5181 | [2] | BOLT | |
2A-5328 | [2] | LOCK | ||
32. | 4N-3982 | [2] | BEARING | |
33. | 4N-3983 | [2] | BEARING (.010 in. undersize) | |
4N-3984 | [2] | BEARING (.020 in. undersize) | ||
4N-3985 | [2] | BEARING (.030 in. undersize) | ||
34. | 8S-1981 | [1] | CRANKSHAFT | |
35. | 9L-1518 | [2] | WASHER | |
36. | 1F-0006 | [1] | GASKET | |
37. | 9M-0380 | [2] | LOCK | |
38. | 3S-0914 | [2] | PISTON ASSEM. | |
39. | 1S-9875 | [1] | KIT (Piston Ring includes 8 Rings) | |
1S-9874 | [1] | KIT (Air Compressor Valve) | ||
(Consists of Element, Gaskets, Guides, Pistons, Plungers, Saddle, Seal, SEAT, SPRINGS AND VALVES) |
#UE0700900069
4N-3927: COMPRESSOR AS
4N3927 AIR COMPRESSOR ASSEMBLY--Field Installation--Type 2
Serial No. 76J5963, 5968 to 5972, 5975 to 5977 & 76J5979-Up and 30K1547 to
1549, 1551, 1552, 1554 to 1560 & 30K1567-Up. Part of Air Compressor shown on
Page 31
Serial No. 76J5963, 5968 to 5972, 5975 to 5977 & 76J5979-Up and 30K1547 to
1549, 1551, 1552, 1554 to 1560 & 30K1567-Up. Part of Air Compressor shown on
Page 31
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8S-4583 | [8] | BOLT | |
2. | 8S-4365 | [1] | FITTING | |
1S-7107 | [1] | GASKET | ||
3. | 8S-4581 | [1] | HEAD ASSEM. | |
4. | 8S-7599 | [2] | SEAT | |
5. | 1A-2850 | [2] | STUD | |
1B-4202 | [2] | NUT | ||
6. | 4L-7318 | [10] | LOCKWASHER | |
7. | 9M-0397 | [1] | FITTING | |
9M-0385 | [1] | PLATE | ||
6L-1884 | [2] | GASKET | ||
8. | 2B-2695 | [2] | BOLT | |
9. | 3J-5390 | [2] | PLUG | |
10. | 8S-1982 | [1] | GASKET | |
11. | 8S-4582 | [1] | BLOCK ASSEM | |
12. | 3K-5762 | [1] | PLUG | |
13. | 9M-0382 | [2] | BUSHING | |
14. | 9M-0381 | [2] | SEAT | |
15. | 4N-9679 C | [1] | GOVERNOR ASSEM. | |
9M-0402 | [1] | KIT (Governor Overhaul) | ||
(Includes Grommets, Valves, Springs, Filters and Seal) | ||||
16. | 2S-2923 | [1] | COVER | |
17. | 1F-5842 | [2] | BOLT | |
18. | 6L-1883 | [2] | GASKET | |
19. | 0L-1351 | [6] | BOLT | |
3B-4506 | [6] | LOCKWASHER | ||
20. | 9S-1784 | [1] | SPACER | |
21. | 8S-1978 | [1] | COVER ASSEM. | |
22. | 1S-9867 | [1] | BEARING | |
23. | 5M-6214 | [1] | PLUG | |
24. | 4M-0061 | [4] | BOLT | |
25. | 5M-6509 | [1] | SEAL | |
26. | 4M-5281 | [6] | BOLT | |
3B-4504 | [6] | LOCKWASHER | ||
27. | 3H-5175 | [1] | GASKET | |
28. | 9S-9740 | [1] | CRANKCASE ASSEM. | |
29. | 1S-9867 | [1] | BEARING | |
30. | 1S-9873 | [2] | ROD ASSEM. | |
31. | 9M-5181 | [2] | BOLT | |
2A-5328 | [2] | LOCK | ||
32. | 4N-3982 | [2] | BEARING | |
33. | 4N-3983 | [2] | BEARING (.010 in. undersize) | |
4N-3984 | [2] | BEARING (.020 in. undersize) | ||
4N-3985 | [2] | BEARING (.030 in. undersize) | ||
34. | 8S-1981 | [1] | CRANKSHAFT | |
35. | 9L-1518 | [2] | WASHER | |
36. | 1F-0006 | [1] | GASKET | |
37. | 9M-0380 | [2] | LOCK | |
38. | 3S-0914 | [2] | PISTON ASSEM. | |
39. | 1S-9875 | [1] | KIT (Piston Ring-includes 8 Rings) | |
40. | 9F-2247 C | [4] | PLUG | |
1S-9874 | [1] | KIT (Air Compressor Valve) | ||
(Consists of Element, Gaskets, Guides, Pistons, Plungers, Saddle, Seal, SEAT, SPRINGS AND VALVES) | ||||
C | INDICATES CHANGE |
Information:
BASIC ENGINE
PISTON & ROD GP
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Disassembly and Assembly
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
1980/06/09
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
1982/08/09
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
1978/04/17