POWER TRAIN
AXLE GPFRAME AND BODY
FRAME GPHITCH GP
POWER TRAIN
AXLE GPBRAKING SYSTEM
CONTROL GPPOWER TRAIN
AXLE GP#UE0700900240
4K-6137: FINAL DRIVE AND WHEEL
FINAL DRIVE AND WHEEL (4K6137 N/S)--4 Required
Serial No. 76J4348 to 76J5471 inclusive and 30K1280 to 30K1434 inclusive
Serial No. 76J4348 to 76J5471 inclusive and 30K1280 to 30K1434 inclusive
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6736 | [1] | DRUM | ||
4K-6737 | [1] | GEAR (64 TEETH) | ||
8K-6953 | [1] | WHEEL ASSEM. | ||
2K-5069 | [1] | CUP | ||
2K-5066 | [1] | CONE | ||
4K-6810 | [1] | RETAINER | ||
5M-1176 R | [1] | SEAL GROUP | ||
2K-5073 | [1] | BUSHING | ||
(PART OF HUB ASSEM. 7K7433) | ||||
7K-7433 | [1] | HUB ASSEM. | ||
(64 TEETH) | ||||
9S-6575 | [1] | CONE | ||
2K-5067 | [1] | CUP | ||
2M-0344 | [2] | SEAL | ||
(PART OF SEAL GROUP 5M1176) | ||||
4K-6804 | [1] | SEAL | ||
3B-1915 | [4] | BOLT | ||
2H-3504 | [4] | LOCK | ||
4K-7342 | [4] | BAR | ||
0T-0102 | [8] | BOLT | ||
0L-0796 | [4] | LOCK | ||
2K-5127 | [4] | PLATE | ||
4K-6754 | [16] | BOLT | ||
(PART OF WHEEL ASSEM. 8K6953) | ||||
1A-1135 | [16] | BOLT | ||
2A-3710 | [8] | LOCK | ||
0S-1589 | [16] | BOLT | ||
3B-4510 | [16] | LOCKWASHER | ||
7K-1848 | [1] | CARRIER | ||
2B-7557 | [2] | CORK | ||
0S-1585 | [6] | BOLT | ||
3B-4508 | [6] | LOCKWASHER | ||
2K-5133 | [1] | NUT | ||
4K-4288 | [1] | WASHER | ||
9K-1193 C | [1] | GEAR (17 TEETH) | ||
2K-0723 | [1] | RING | ||
2D-0604 | [1] | BUTTON | ||
(PART OF COVER ASSEM. 5K5933) | ||||
9S-4181 | [1] | PLUG | ||
7M-8485 | [1] | SEAL | ||
3K-7020 | [3] | GEAR (23 TEETH) | ||
7K-1840 | [6] | WASHER (STEEL) | ||
4K-6806 | [3] | SHAFT | ||
4K-6801 | [3] | RING | ||
5K-5933 | [1] | COVER ASSEM. | ||
2L-3650 | [1] | PIN | ||
7K-1839 | [6] | WASHER (BRONZE) | ||
6K-0356 | [1] | SEAL | ||
5K-8245 | [4] | BOLT | ||
4S-8775 | [2 FEET] | LOCKWIRE | ||
5K-8247 | [1] | LOCK | ||
4M-3915 | [6] | BEARING ASSEM. | ||
6K-0358 | [1] | SEAL | ||
5K-1555 | [1] | PLUG | ||
4K-8476 | [1] | GASKET | ||
8F-3469 | [1] | SEAL | ||
C | INDICATES CHANGE | |||
R | REMFG PART MAY BE AVAILABLE |
#UE0700900241
8K-6467: WHEEL & FINAL DRIVE GP
8K6467 FINAL DRIVE AND WHEEL GROUP--4 Required
Serial No. 76J5472-Up and 30K1435-Up
Serial No. 76J5472-Up and 30K1435-Up
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6736 | [1] | DRUM | ||
9K-1773 | [1] | GEAR (64 TEETH) | ||
8K-6953 | [1] | WHEEL ASSEM. | ||
2K-5069 | [1] | CUP | ||
2K-5066 | [1] | CONE | ||
4K-6810 | [1] | RETAINER | ||
5M-1176 | [1] | SEAL GROUP (std) | ||
-OR- | ||||
5P-0374 H | [1] | SEAL GROUP | ||
(High Temperature) | ||||
2K-5073 | [1] | BUSHING | ||
(Part of 9K2300 Assem.) | ||||
9K-2300 | [1] | HUB ASSEM. (64 TEETH) | ||
9S-6575 | [1] | CONE | ||
2K-5067 | [1] | CUP | ||
2M-0344 | [2] | RING | ||
(Part of 5M1176 Group) | ||||
3N-0759 | [2] | RING | ||
(Part of 5P374 Group) | ||||
4K-6804 | [1] | SEAL | ||
3B-1915 | [4] | BOLT | ||
2H-3504 | [4] | LOCK | ||
4K-7342 | [4] | BAR | ||
0T-0102 | [8] | BOLT | ||
0L-0796 | [4] | LOCK | ||
2K-5127 | [4] | PLATE | ||
4K-6754 | [16] | BOLT | ||
(Part of 8K6953 Group) | ||||
1A-1135 | [16] | BOLT | ||
2A-3710 | [8] | LOCK | ||
0S-1589 | [16] | BOLT | ||
3B-4510 | [16] | LOCKWASHER | ||
9K-1759 | [1] | CARRIER | ||
2B-7557 | [2] | CORK | ||
0S-1585 | [6] | BOLT | ||
3B-4508 | [6] | LOCKWASHER | ||
2K-5133 | [1] | NUT | ||
8K-6019 | [1] | WASHER | ||
8K-6282 | [1] | GEAR (17 TEETH) | ||
8K-6464 | [1] | RING | ||
2D-0604 | [1] | BUTTON | ||
(PART OF COVER ASSEM. 5K5933) | ||||
9S-4181 | [1] | PLUG | ||
7M-8485 | [1] | SEAL | ||
9K-1758 | [3] | GEAR (23 TEETH) | ||
7K-1840 | [6] | WASHER (STEEL) | ||
9K-1749 | [3] | SHAFT | ||
4K-6801 | [3] | RING | ||
5K-5933 | [1] | COVER ASSEM. | ||
2L-3650 | [1] | PIN | ||
7K-1839 | [6] | WASHER (bronze) | ||
6K-0356 | [1] | SEAL | ||
5K-8245 | [4] | BOLT | ||
4S-8775 | [2 ft.] | LOCKWIRE | ||
5K-8247 | [1] | LOCK | ||
5M-0578 | [6] | ROLLER ASSEM. | ||
6K-0358 | [1] | SEAL | ||
5K-1555 | [1] | PLUG | ||
4K-8476 | [1] | GASKET | ||
8F-3469 | [1] | SEAL | ||
H | NOT PART OF FINAL DRIVE & WHEEL |
#UE0700900242
6K-2230: REAR FRAME
REAR FRAME (6K2230 N/S)
Serial No. 76J1 to 5076, 5078 to 5082, 5084 to 5091, 5094, 5095, 5097, 5098, 5100,
5102 to 5104, 5106, 5108, 5109, 5111, 5113 to 5117, 5119, 5120, 5122, 5211 to 5232
and 76J5251 to 76J5254 inclusive and 30K1 to 30K1385 inclusive
Serial No. 76J1 to 5076, 5078 to 5082, 5084 to 5091, 5094, 5095, 5097, 5098, 5100,
5102 to 5104, 5106, 5108, 5109, 5111, 5113 to 5117, 5119, 5120, 5122, 5211 to 5232
and 76J5251 to 76J5254 inclusive and 30K1 to 30K1385 inclusive
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6558 | [1] | PIN | ||
4K-6780 | [1] | SPACER | ||
4K-7461 | [1] | SEAL | ||
4K-6761 | [1] | CAP | ||
4K-7465 | [1] | SHIM | ||
4K-7467 | [1] | BEARING ASSEM. | ||
4K-7462 | [1] | SEAL | ||
4K-6760 | [1] | CAP | ||
4K-6781 | [1] | SPACER | ||
4K-7464 | [1] | SHIM | ||
4K-6759 | [1] | PLATE | ||
0S-1585 | [6] | BOLT | ||
3B-4508 | [6] | LOCKWASHER | ||
0S-1589 | [4] | BOLT | ||
3B-4510 | [4] | LOCKWASHER | ||
4K-8479 | [6] | STUD | ||
(Part of Frame Assem. 6K2161) | ||||
4K-7239 | [4] | DOWEL | ||
6K-2161 | [1] | FRAME ASSEM. | ||
1A-8537 | [2] | BOLT | ||
3B-4510 | [2] | LOCKWASHER | ||
4K-8542 | [2] | STUD | ||
(Parts of Frame Assem. 6K2161) | ||||
0S-1587 | [2] | BOLT | ||
3B-4508 | [2] | LOCKWASHER | ||
2B-0947 | [4] | BOLT | ||
3B-4508 | [4] | LOCKWASHER | ||
5K-0609 | [1] | COVER | ||
2B-7557 | [2] | CORK | ||
4K-8561 | [1] | PIN | ||
4K-8653 | [1] | COLLAR | ||
4K-8734 | [1] | BEARING | ||
3B-8489 | [1] | FITTING | ||
2B-2006 | [8] | BOLT | ||
3B-4508 | [8] | LOCKWASHER | ||
0S-1756 | [2] | BOLT | ||
3B-4512 | [2] | LOCKWASHER | ||
1D-4615 | [8] | BOLT | ||
1B-4331 | [10] | NUT | ||
3B-4512 | [8] | LOCKWASHER | ||
4K-7287 | [1] | SUPPORT ASSEM. | ||
(Rear) | ||||
3B-8486 | [1] | FITTING | ||
4K-7286 | [1] | SUPPORT ASSEM. | ||
(Front) | ||||
[6] | BOLT | |||
3B-4510 | [6] | LOCKWASHER | ||
5K-8799 | [2] | HOOK | ||
(Part of Frame Assem. 6K2161) | ||||
4K-7251 | [1] | COVER | ||
2K-0714 | [1] | PLATE | ||
2K-0713 | [1] | BEARING | ||
(Part of Support Assem. 4K7287) | ||||
0L-1178 | [4] | BOLT | ||
3K-3008 | [2] | LOCK | ||
2K-0715 | [2] | WASHER | ||
6K-2430 | [1] | SEAL | ||
3B-8489 | [2] | FITTING | ||
4K-8225 | [2] | PIN | ||
1A-1135 | [2] | BOLT | ||
3B-4510 | [2] | LOCKWASHER | ||
4K-8593 | [2] | WASHER | ||
3K-0159 | [1] | RING | ||
3K-0109 | [1] | BEARING | ||
(Part of Support Assem. 4K7286) | ||||
3K-0158 | [2] | SEAL | ||
3B-8489 | [1] | FITTING |
#UE0700900243
6K-2230: REAR FRAME
REAR FRAME (6K2230 N/S)
Serial No. 76J5077, 5083, 5092, 5093, 5096, 5099, 5101, 5105, 5107, 5110, 5112, 5118, 5121, 5123 to
5210, 5233 to 5250 and 76J5255 to 76J5570 inclusive and 30K1386 to 30K1461 inclusive
Serial No. 76J5077, 5083, 5092, 5093, 5096, 5099, 5101, 5105, 5107, 5110, 5112, 5118, 5121, 5123 to
5210, 5233 to 5250 and 76J5255 to 76J5570 inclusive and 30K1386 to 30K1461 inclusive
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6558 | [1] | PIN | ||
4K-6780 | [1] | SPACER | ||
4K-7461 | [1] | SEAL | ||
4K-6761 | [1] | CAP | ||
4K-7465 | [1] | SHIM | ||
4K-7467 | [1] | BEARING ASSEM. | ||
4K-7462 | [1] | SEAL | ||
4K-6760 | [1] | CAP | ||
4K-6781 | [1] | SPACER | ||
4K-7464 | [1] | SHIM | ||
4K-6759 | [1] | PLATE | ||
0S-1585 | [6] | BOLT | ||
3B-4508 | [6] | LOCKWASHER | ||
0S-1589 | [4] | BOLT | ||
3B-4510 | [4] | LOCKWASHER | ||
4K-8479 C | [5] | STUD | ||
(Part of 6K2161 Assem.) | ||||
4K-7239 | [4] | DOWEL | ||
6K-2161 | [1] | FRAME ASSEM. | ||
2J-3348 C | [3] | BLOCK | ||
1A-8537 | [2] | BOLT | ||
3B-4510 | [2] | LOCKWASHER | ||
(Parts of 6K2161 Assem.) | ||||
0S-1587 | [2] | BOLT | ||
3B-4508 | [2] | LOCKWASHER | ||
2B-0947 | [4] | BOLT | ||
3B-4508 | [4] | LOCKWASHER | ||
5K-0609 | [1] | COVER | ||
2B-7557 | [2] | CORK | ||
4K-8561 | [1] | PIN | ||
4K-8653 | [1] | COLLAR | ||
4K-8734 | [1] | BEARING | ||
3B-8489 | [1] | FITTING | ||
2B-2006 | [8] | BOLT | ||
3B-4508 | [8] | LOCKWASHER | ||
3H-0983 | [2] | CLIP | ||
(Part of 6K2161 Assem.) | ||||
0S-1756 | [2] | BOLT | ||
3B-4512 | [2] | LOCKWASHER | ||
1D-4615 | [8] | BOLT | ||
2J-3506 C | [10] | NUT | ||
2S-0115 C | [16] | WASHER | ||
4K-7287 | [1] | SUPPORT ASSEM. | ||
(Rear) | ||||
3B-8486 | [1] | FITTING | ||
4K-7286 | [1] | SUPPORT ASSEM. | ||
(Front) | ||||
8S-9092 C | [6] | BOLT | ||
3B-4510 | [6] | LOCKWASHER | ||
7K-1972 C | [2] | EYE | ||
(Part of 6K2161 Assem.) | ||||
4K-7251 | [1] | COVER | ||
2K-0714 | [1] | PLATE | ||
2K-0713 | [1] | BEARING | ||
(Part of 4K7287 Assem.) | ||||
0L-1178 | [4] | BOLT | ||
3K-3008 | [2] | LOCK | ||
2K-0715 | [2] | WASHER | ||
6K-2430 | [1] | SEAL | ||
3B-8489 | [2] | FITTING | ||
4K-8225 | [2] | PIN | ||
0S-1625 C | [2] | BOLT | ||
3B-4510 | [2] | LOCKWASHER | ||
7K-6117 C | [2] | WASHER | ||
3K-0159 | [1] | RING | ||
3K-0109 | [1] | BEARING | ||
(Part of 4K7286 Assem.) | ||||
3K-0158 | [2] | SEAL | ||
3B-8489 | [1] | FITTING | ||
C | INDICATES CHANGE |
#UE0700900244
6K-2230: REAR FRAME
REAR FRAME (6K2230 N/S)
Serial No. 76J5571 to 76J5797 inclusive and 30K1462 to 30K1507 inclusive
Serial No. 76J5571 to 76J5797 inclusive and 30K1462 to 30K1507 inclusive
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6558 | [1] | PIN | ||
4K-6780 | [1] | SPACER | ||
4K-7461 | [1] | SEAL | ||
4K-6761 | [1] | CAP | ||
4K-7465 | [1] | SHIM | ||
4K-7467 | [1] | BEARING ASSEM. | ||
4K-7462 | [1] | SEAL | ||
4K-6760 | [1] | CAP | ||
4K-6781 | [1] | SPACER | ||
4K-7464 | [1] | SHIM | ||
4K-6759 | [1] | PLATE | ||
0S-1585 | [6] | BOLT | ||
3B-4508 | [6] | LOCKWASHER | ||
0S-1589 | [4] | BOLT | ||
3B-4510 | [4] | LOCKWASHER | ||
4K-8479 | [5] | STUD | ||
(Part of 6K2161 Assem.) | ||||
4K-7239 | [4] | DOWEL | ||
6K-2161 | [1] | FRAME ASSEM. | ||
2J-3348 | [3] | BLOCK | ||
1A-8537 | [2] | BOLT | ||
3B-4510 | [2] | LOCKWASHER | ||
(Parts of 6K2161 Assem.) | ||||
0S-1587 | [2] | BOLT | ||
3B-4508 | [2] | LOCKWASHER | ||
2B-0947 | [4] | BOLT | ||
3B-4508 | [4] | LOCKWASHER | ||
5K-0609 | [1] | COVER | ||
2B-7557 | [2] | CORK | ||
4K-8561 | [1] | PIN | ||
4K-8653 | [1] | COLLAR | ||
4K-8734 | [1] | BEARING | ||
3B-8489 | [1] | FITTING | ||
2B-2006 | [8] | BOLT | ||
3B-4508 | [8] | LOCKWASHER | ||
3H-0983 | [2] | CLIP | ||
(Part of 6K2161 Assem.) | ||||
0S-1756 | [2] | BOLT | ||
3B-4512 | [2] | LOCKWASHER | ||
6K-1330 | [8] | BOLT | ||
2J-3506 | [10] | NUT | ||
2S-0115 | [16] | WASHER | ||
4K-7287 | [1] | SUPPORT ASSEM. (Rear) | ||
3B-8486 | [1] | FITTING | ||
9K-0854 | [1] | SUPPORT ASSEM. (Front) | ||
8S-9092 | [6] | BOLT | ||
3B-4510 | [6] | LOCKWASHER | ||
7K-1972 | [2] | EYE | ||
(Part of 6K2161 Assem.) | ||||
4K-7251 | [1] | COVER | ||
2K-0714 | [1] | PLATE | ||
2K-0713 | [1] | BEARING | ||
(Part of 4K7287 Assem.) | ||||
0L-1178 | [4] | BOLT | ||
3K-3008 | [2] | LOCK | ||
2K-0715 | [2] | WASHER | ||
6K-2430 | [1] | SEAL | ||
3B-8489 | [2] | FITTING | ||
4K-8225 | [2] | PIN | ||
0S-1625 | [2] | BOLT | ||
3B-4510 | [2] | LOCKWASHER | ||
7K-6117 | [2] | WASHER | ||
3K-0159 | [1] | RING | ||
3K-0109 | [1] | BEARING | ||
(Part of 9K854 Assem.) | ||||
3K-0158 | [2] | SEAL | ||
3B-8489 | [1] | FITTING |
#UE0700900245
9K-4181: FRAME GP-REAR
REAR FRAME (9K4181 N/S)
Serial No. 76J5798-Up and 30K1508-Up
Serial No. 76J5798-Up and 30K1508-Up
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9K-4182 | [1] | FRAME ASSEM. | |
2. | 7K-1972 | [2] | EYE | |
3. | 1A-8537 | [4] | BOLT | |
3B-4510 | [4] | LOCKWASHER | ||
4. | 7K-9012 | [1] | STOP | |
5. | 4K-7661 | [1] | HITCH ASSEM. | |
6. | 4K-7694 | [1] | HITCH ASSEM. | |
7. | 4K-8161 | [1] | BLOCK | |
8. | 4K-8479 | [5] | STUD | |
9. | 3K-0983 | [2] | CLIP | |
10. | 0S-1756 | [2] | BOLT | |
3B-4512 | [2] | LOCKWASHER | ||
11. | 2J-3506 | [10] | NUT | |
12. | 4K-7287 | [1] | SUPPORT ASSEM. | |
13. | 2K-0713 | [1] | BEARING | |
14. | 3B-8486 | [1] | FITTING | |
15. | 8S-9092 | [6] | BOLT | |
16. | 3B-4510 | [8] | LOCKWASHER | |
17. | 2K-0715 | [2] | WASHER | |
18. | 0L-1178 | [4] | BOLT | |
3K-3008 | [2] | LOCK | ||
19. | 4K-7251 | [1] | COVER | |
20. | 2K-0714 | [1] | PLATE | |
21. | 6K-2430 | [1] | SEAL | |
22. | 4K-8225 | [2] | PIN | |
23. | 3B-8489 | [3] | FITTING | |
24. | 0S-1625 | [2] | BOLT | |
7K-6117 | [2] | WASHER | ||
25. | 9K-0854 | [1] | SUPPORT ASSEM. | |
26. | 3K-0109 | [1] | BEARING | |
27. | 3K-0158 | [2] | SEAL | |
28. | 3K-0159 | [1] | RING | |
29. | 4K-7239 | [4] | DOWEL | |
30. | 6K-1330 | [8] | BOLT | |
2S-0115 | [16] | WASHER |
#UE0700900246
9K-4557: HITCH GP-ARTICULATED
HITCH (9K4557 N/S)
Serial No. 76J5798-Up and 30K1508-Up
Serial No. 76J5798-Up and 30K1508-Up
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [4] | BOLT | ||
2. | [20] | LOCKWASHER | ||
3. | [2] | BOLT | ||
4. | [2] | CORK | ||
5. | [1] | COVER | ||
6. | [1] | COLLAR | ||
7. | [1] | BEARING | ||
8. | [1] | PIN | ||
9. | [1] | SEAL | ||
10. | [1] | PIN | ||
11. | [1] | SPACER | ||
12. | [1] | CAP | ||
13. | [4] | FITTING | ||
14. | [1] | SHIM | ||
15. | [1] | BEARING ASSEM. | ||
16. | [1] | CAP | ||
17. | [1] | SEAL | ||
18. | [6] | BOLT | ||
19. | [1] | COVER | ||
20. | [4] | BOLT | ||
[4] | LOCKWASHER | |||
21. | [1] | SPACER | ||
22. | [1] | SHIM | ||
23. | [8] | BOLT |
#UE0700900247
4K-6139: REAR BRAKE AND AXLE GROUP
4K6139 REAR BRAKE AND AXLE GROUP
Serial No. 76J1 to 76J5471 inclusive and 30K1 to 30K1434 inclusive
5K4984 Brake parts are shown on Page 91
Serial No. 76J1 to 76J5471 inclusive and 30K1 to 30K1434 inclusive
5K4984 Brake parts are shown on Page 91
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6330 | [1] | HOUSING | ||
6B-2731 | [1] | PLUG | ||
8B-3410 | [1] | GASKET | ||
6K-8921 | [2] | AXLE | ||
0S-1589 | [10] | BOLT | ||
3B-4510 | [10] | LOCKWASHER | ||
1K-8059 | [1] | PIN | ||
3H-4190 | [1] | PLUG | ||
6B-9186 | [1] | GASKET | ||
7K-0686 | [1] | TRUNNION | ||
4F-7388 | [1] | SEAL | ||
4K-6807 | [32] | BOLT | ||
6B-6682 | [32] | NUT | ||
3B-4512 | [32] | LOCKWASHER | ||
6K-4497 | [1] | BRACKET ASSEM. | ||
(RIGHT HAND) | ||||
6K-4498 | [1] | BRACKET ASSEM. | ||
(LEFT HAND) | ||||
5K-4985 | [1] | CAMSHAFT | ||
(RIGHT HAND) | ||||
5K-4986 | [1] | CAMSHAFT | ||
(Left Hand) | ||||
1L-1426 | [2] | RING | ||
1M-0157 | [2] | WASHER | ||
6K-4487 | [2] | BEARING | ||
0S-1589 | [8] | BOLT | ||
3B-4510 | [8] | LOCKWASHER | ||
3B-8485 | [2] | FITTING | ||
0S-0509 | [12] | BOLT | ||
3B-4506 | [12] | LOCKWASHER | ||
4B-4278 | [12] | WASHER | ||
4K-6735 | [2] | COVER | ||
(R.H. Upper-L.H. Lower) | ||||
4K-6388 | [2] | SPINDLE | ||
5H-3252 | [2] | SEAL | ||
5K-4984 Y | [2] | BRAKE ASSEM. | ||
(SEE SEPARATE ILLUSTRATION) | ||||
4K-6734 | [2] | COVER | ||
(L.H. Upper-R.H. Lower) | ||||
Y | SEPARATE ILLUSTRATION |
#UE0700900248
8K-6511: BRAKE & AXLE GP-REAR
8K6511 REAR BRAKE AND AXLE GROUP
Serial No. 76J5472-Up and 30K1435-Up
5K4984 Brake parts are shown on Page 91
Serial No. 76J5472-Up and 30K1435-Up
5K4984 Brake parts are shown on Page 91
Parts for your 966C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4K-6330 | [1] | HOUSING | ||
6B-2731 | [1] | PLUG | ||
8B-3410 | [1] | GASKET | ||
8K-6285 | [2] | AXLE | ||
0S-1589 | [10] | BOLT | ||
3B-4510 | [10] | LOCKWASHER | ||
1K-8059 | [1] | PIN | ||
3H-4190 | [1] | PLUG | ||
6B-9186 | [1] | GASKET | ||
7K-0686 | [1] | TRUNNION | ||
4F-7388 | [1] | SEAL | ||
4K-6807 | [32] | BOLT | ||
6B-6682 | [32] | NUT | ||
2S-0115 | [32] | WASHER | ||
6K-4497 | [1] | BRACKET ASSEM. | ||
(RIGHT HAND) | ||||
6K-4498 | [1] | BRACKET ASSEM. | ||
(LEFT HAND) | ||||
5K-4985 | [1] | CAMSHAFT | ||
(RIGHT HAND) | ||||
5K-4986 | [1] | CAMSHAFT | ||
(LEFT HAND) | ||||
1L-1426 | [2] | RING | ||
1M-0157 | [2] | WASHER | ||
6K-4487 | [2] | BEARING | ||
0S-1589 | [8] | BOLT | ||
3B-4510 | [8] | LOCKWASHER | ||
3B-8485 | [2] | FITTING | ||
0S-0509 | [12] | BOLT | ||
3B-4506 | [12] | LOCKWASHER | ||
4B-4278 | [12] | WASHER | ||
4K-6735 | [2] | COVER | ||
(R.H. UPPER - L.H. LOWER) | ||||
[2] | SPINDLE | |||
5H-3252 | [2] | SEAL | ||
5K-4984 Y | [2] | BRAKE ASSEM. | ||
(SEE SEPARATE ILLUSTRATION | ||||
4K-6734 | [2] | COVER | ||
(L.H. UPPER - R.H. LOWER) | ||||
Y | SEPARATE ILLUSTRATION |
#UE0700900249
AIR AND BRAKE CONTROL
AIR AND BRAKE CONTROL--As Viewed from Front Left Hand Side of Machine
Information:
POWER TRAIN
AXLE GP
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Dimensions for Oscillating Rear Axle Components and Supports{3278, 3282}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Wheel Loader Power Train Specifications: 966C, 966D, 966E, 980C, 988B, 992, 992B, 992C{3278, 4050, 4051, 4054, 4084, 4205}
Wheel Loader Power Train Specifications: 966C, 966D, 966E, 980C, 988B, 992, 992B, 992C{3278, 4050, 4051, 4054, 4084, 4205}
Wheel Loader Power Train Specifications: 966C, 966D, 966E, 980C, 988B, 992, 992B, 992C{3278, 4050, 4051, 4054, 4084, 4205}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Service Magazine