AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J4059 TOOTH GROUP--Long Tip--With Two-piece Teeth FOR USE WITH 9K287, 9K1611 AND 9K286 BUCKET ASSEMBLIES SHOWN ON PAGES 155A, 155B AND 156B 966C


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
FORK GP

WHEEL LOADER 966C WHEEL LOADER 30K
 966C WHEEL LOADER 30K00001-01624 (MACHINE) UE070090 966C 30K   (1967)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
TOOTH GROUP
4K-8945 TOOTH GROUP
TOOTH GROUP
5K-7582 TOOTH GROUP
TOOTH GROUP
8J-4059 TOOTH GROUP
TOOTH GP
8J-5038 TOOTH GP
TOOTH GROUP
8J-4060 TOOTH GROUP
TOOTH GROUP
5K-2837 TOOTH GROUP
 

#UE0700900660
 

8J-4059: TOOTH GROUP

8J4059 TOOTH GROUP--Long Tip--With Two-piece Teeth
FOR USE WITH 9K287, 9K1611 AND 9K286 BUCKET
ASSEMBLIES SHOWN ON PAGES 155A, 155B AND 156B
c140342 UE070090
8J4059 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3507 [24] NUT  
2. 4J-9058 [8] BOLT  
3. 8J-5307 [8] ADAPTER  
4. 8J-5308 [8] PIN  
5. 8J-5302 [8] TIP  
6. 8J-5309 [8] SPRING  
7. 8J-2928 [16] BOLT  
8. 3K-5234 [8] WASHER  
 

#UE0700900661
 

8J-5038: TOOTH GP

8J5038 TOOTH GROUP--With One-piece Tooth
FOR USE WITH 9K287, 9K1611 AND 9K286 BUCKET
ASSEMBLIES SHOWN ON PAGES 155A, 155B AND 156B
c140346 UE070090
8J5038 TOOTH GP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3507 [24] NUT  
2. 8J-2936 [8] TOOTH  
3. 8J-2928 [16] BOLT  
4. 4J-9058 [8] BOLT  
5. 3K-5234 [8] WASHER  
 

#UE0700900662
 

8J-4060: TOOTH GROUP

8J4060 TOOTH GROUP--Short Tip--With Two-piece Teeth
FOR USE WITH 9K287, 9K1611 AND 9K286 BUCKET
ASSEMBLIES SHOWN ON PAGES 155A, 155B AND 156B
c140347 UE070090
8J4060 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3507 [24] NUT  
2. 4J-9058 [8] BOLT  
3. 8J-5307 [8] ADAPTER  
4. 8J-5308 [8] PIN  
5. 8J-5301 [8] TIP  
6. 8J-5309 [8] SPRING  
7. 8J-2928 [16] BOLT  
8. 3K-5234 [8] WASHER  
 

#UE0700900663
 

5K-2837: TOOTH GROUP

5K2837 TOOTH GROUP--Short Tip
FOR USE WITH MULTI-PURPOSE BUCKET
c101791 UE070090
5K2837 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-8659 [9] WASHER  
2. 2J-3505 [18] NUT  
3. 2H-3856 [18] BOLT  
4. 6K-4141 [9] ADAPTER  
5. 4K-0032 [9] PIN  
6. 5K-2926 [9] TIP  
7. 4K-0008 [9] PLUG  
8. 4K-4733 [9] STRIP  
 

#UE0700900664
 

5K-0735: LOG FORK GROUP

5K735 LOG FORK GROUP
COUNTERWEIGHT IS REQUIRED WHERE ROUGH GROUND CONDITIONS EXIST
Only separate parts serviced. When complete group is required
order 6K1010 shown on Page 159B
c127755 UE070090
5K0735 LOG FORK GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-8885 [1] CHANNEL ASSEM.  
    (RIGHT HAND)
  2K-8886 [1] CHANNEL ASSEM.  
    (LEFT HAND)
  0S-1573 [2] BOLT  
  1D-4719 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  2K-8382 [2] PIN  
  0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  2K-0703 [2] BAR  
  7K-1522 H [1] TIP (NOT SHOWN)  
    (FIELD REPLACEMENT FOR WORN TIP ON TINE)
  5K-0900 [1] CARRIAGE ASSEM.  
  H   NOT PART OF 5K735 GROUP
 

#UE0700900665
 

6K-1010: LOG FORK GROUP

6K1010 LOG FORK GROUP--Type 3
COUNTERWEIGHT GROUP IS REQUIRED WHERE
ROUGH CONDITIONS EXIST
c112824 UE070090
6K1010 LOG FORK GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-3507 [1] CARRIAGE ASSEM.  
2. 6K-7747 [1] PLATE ASSEM. (R.H. Outer)  
  6K-7745 [1] PLATE ASSEM. (R.H. Inner)  
  6K-7746 [1] PLATE ASSEM. (L.H. Inner)  
  6K-7748 [1] PLATE ASSEM. (L.H. Outer)  
3. 2K-3656 [1] BAR  
4. 7K-3505 [2] TINE  
5. [2] PLATE  
6. 7K-8707 [2] TIP  
    (Parts of 7K3507 Assem.)
7. 2B-7556 [2] CORK  
8. 0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
9. 5K-2266 [2] BAR  
10. 7K-1250 [1] CAM (Upper)  
  7K-1249 [1] CAM (Lower)  
11. 6K-5080 [2] PIN  
12. 6K-5031 [2] CHANNEL ASSEM.  
 

#UE0700900666
 

6K-1010: LOG FORK GROUP

6K1010 LOG FORK GROUP--Type 1
COUNTERWEIGHT IS REQUIRED WHERE ROUGH GROUND CONDITIONS EXIST
c128582 UE070090
6K1010 LOG FORK GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-7751 [1] CARRIAGE ASSEM.  
2. 6K-7747 [1] PLATE ASSEM. (R.H. Outer)  
  6K-7745 [1] PLATE ASSEM. (R.H. Inner)  
  6K-7746 [1] PLATE ASSEM. (L.H. Inner)  
  6K-7748 [1] PLATE ASSEM. (L.H. Outer)  
3. 2K-3656 [1] BAR  
4. 6K-3686 [1] TINE ASSEM.  
    (Parts of 6K7751 Carriage Assem.)
5. 6K-5080 [2] PIN  
6. 6K-5031 [2] CHANNEL ASSEM.  
7. 2B-7556 [2] CORK  
8. 0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
9. 5K-2266 [2] BAR  
10. 7K-1250 [1] CAM (Upper)  
  7K-1249 [1] CAM (Lower)  
  7K-1521 H [1] TIP  
    (Not Shown - Field Replacement for Worn Tip on Tine)
  H   NOT PART OF 6K1010 LOG FORK GR
 

#UE0700900667
 

6K-1010: LOG FORK GROUP

6K1010 LOG FORK GROUP--Type 2
COUNTERWEIGHT GROUP IS REQUIRED WHERE ROUGH GROUND
CONDITIONS EXIST
c128693 UE070090
6K1010 LOG FORK GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-3507 C [1] CARRIAGE ASSEM.  
2. 6K-7747 [1] PLATE ASSEM. (R.H. Outer)  
  6K-7745 [1] PLATE ASSEM. (R.H. Inner)  
  6K-7746 [1] PLATE ASSEM. (L.H. Inner)  
  6K-7748 [1] PLATE ASSEM. (L.H. Outer)  
3. 2K-3656 [1] BAR  
4. 7K-3505 [2] TINE  
5. [2] PLATE  
6. 7K-1927 [2] ADAPTER  
    (Parts of 7K3507 Assem.)
7. 2B-7556 [2] CORK  
8. 0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
9. 5K-2266 [2] BAR  
10. 7K-1250 [1] CAM (Upper)  
  7K-1249 [1] CAM (Lower)  
11. 6K-5080 [2] PIN  
12. 6K-5031 [2] CHANNEL ASSEM.  
13. 4K-0043 C [2] PIN  
14. 4K-0041 C [2] PLUG  
15. 7K-1943 C [2] TIP  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0700900668
 

5K-0736: TOP CLAMP ARRANGEMENT

5K736 TOP CLAMP ARRANGEMENT
FOR USE WITH 5K735 LOG FORK GROUP SHOWN ON PAGE 159
UE0700900668 UE070090
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-0478 Y [1] FRONT HYDRAULIC LINES GROUP  
  4K-0501 Y [1] CYLINDER GROUP R.H.  
    - OR -
  8J-5676 Y [1] CYLINDER GROUP R.H.  
  4K-0502 Y [1] CYLINDER GROUP L.H.  
    - OR -
  8J-5677 Y [1] CYLINDER GROUP  
  5K-0877 Y [1] TOP CLAMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UE0700900669
 

5K-0877: TOP CLAMP GROUP

5K877 TOP CLAMP GROUP--Type 1
Part of 5K736 Top Clamp Arrangement
c156985 UE070090
5K0877 TOP CLAMP GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9K-1929 [2] CLAMP AND SEAL SERVICE GROUP  
  2K-0080 [2] PIN  
  3B-8489 [2] FITTING  
  7K-9205 [4] SEAL  
    (2 in each 9K1929 Group)
  2K-8500 [2] PIN  
  3B-8489 [2] FITTING  
  3K-1658 [2] POINT ASSEM.  
    (1 in each 9K1929 Group)
  0S-1621 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  2K-0703 [6] WASHER BAR  
  3K-1659 [2] PIN  
  3B-8489 [2] FITTING  
 

Information:

Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation And Weld Procedure For Improved Cutting Edges On Rock Buckets{6102, 6801}
Installation And Weld Procedure For Improved Cutting Edges On Rock Buckets{6102, 6801}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
New Center Adapters And Cutting Edges Used With New Corner Guard System {6816,6803,6801,6100}
1982/05/31
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08
New Cutting Edges On Rock Buckets Do Not Require Preheating{6102,6801}
1989/02/27
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 966C :

TOOTH GROUP
5K-7582 TOOTH GROUP
TOOTH GROUP
4K-8945 TOOTH GROUP
BUCKET ASSEMBLY
6K-1256 BUCKET ASSEMBLY
BUCKET ASSEMBLY
6K-1007 BUCKET ASSEMBLY
CUTTING EDGE
8J-8141 CUTTING EDGE
8J-7916 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9086 CUTTING EDGE GROUP
CUTTING EDGE GROUP
7K-3919 CUTTING EDGE GROUP
TOOTH GP
8J-5038 TOOTH GP
TOOTH GROUP
8J-4060 TOOTH GROUP
TOOTH GROUP
5K-2837 TOOTH GROUP
LOG FORK GROUP
5K-0735 LOG FORK GROUP
LOG FORK GROUP
6K-1010 LOG FORK GROUP
LOG FORK GROUP
6K-1010 LOG FORK GROUP
LOG FORK GROUP
6K-1010 LOG FORK GROUP
5K-0736 TOP CLAMP ARRANGEMENT

Truck sale:

Caterpillar 966C
 
Caterpillar 966C
- Wheel Loaders
PETERSON TRACTOR CO
Caterpillar 966C, Wheel Loaders, Construction
30,547 
Caterpillar 966C, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
31,209 
Caterpillar 966C, Wheel Loaders, Construction


Caterpillar 966C, Wheel Loaders, Construction
35,551 
Caterpillar 966C, Wheel Loaders, Construction

FINNING CANADA
Caterpillar 966C, Wielladers, Bouw
28.000 
Caterpillar 966C, Wielladers, Bouw
- Wheel loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.