AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CONNECTING ROD AND PISTON (9L4085 N/S)--6 Required 3306 INDUSTRIAL ENGINE


BASIC ENGINE
PISTON & ROD GP
CAMSHAFT GP
MOUNTING GP-ENGINE
DRIVE GP-ACCESSORY
OPERATOR STATION
PANEL GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 66D
 D333C ENGINE 66D00001-08890 UE070091 3306 66D   (1972)

BASIC ENGINE

PISTON & ROD GP
CONNECTING ROD AND PISTON
9L-4085 CONNECTING ROD AND PISTON
 

#UE0700910050
 

9L-4085: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (9L4085 N/S)--6 Required
c112405 UE070091
9L4085 CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-6487 [1] PIN  
2. 1S-9543 [2] RETAINER  
3. 5S-2793 [1] ROD ASSEM.  
  7S-9348 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 7S-6792 [1] PISTON ASSEM.  
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (Intermediate)  
9. 7S-8378 [1] RING (Top)  
  7S-9404 [1] RING GROUP  
    (Consists of Complete Set of Rings For One Piston)
 

#UE0700910051
 

CAMSHAFT

CAMSHAFT
c102054 UE070091
None CAMSHAFT Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CAMSHAFT  
2. [2] BOLT  
3. [1] WASHER  
4. [1] LOCK  
5. [4] BOLT  
6. [1] GEAR (80 Teeth)  
7. [1] LOCK  
 

#UE0700910052
 

ENGINE SUPPORT

ENGINE SUPPORT
Serial No. 66D1 to 1310, 1331, 1386, 1417, 1460, 1490,
1491, 1495 to 1497 and 66D1499 inclusive
c99450 UE070091
None ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1566 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  1A-8651 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  4L-7893 [2] SHIM  
  1D-4720 [4] NUT  
  3L-9713 [2] SUPPORT ASSEM.  
    (FRONT)
  6L-1859 [2] SUPPORT  
    (REAR)
 

#UE0700910053
 

ENGINE SUPPORT

ENGINE SUPPORT
Serial No. 66D1311 to 1330, 1332 to 1385, 1387 to 1416, 1418 to 1459,
1461 to 1489, 1492 to 1494, 1498 and 66D1500-Up
c104883 UE070091
None ENGINE SUPPORT Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [8] BOLT  
  [8] LOCKWASHER  
  [4] BOLT  
  [4] LOCKWASHER  
  [2] SHIM  
  [4] NUT  
  [2] SUPPORT ASSEM. (FRONT)  
  [2] SUPPORT ASSEM. (REAR)  
 

#UE0700910054
 

7L-0260: ACCESSORY DRIVE

ACCESSORY DRIVE (7L260 N/S)
c108678 UE070091
7L0260 ACCESSORY DRIVE Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-9787 [1] COVER  
  8H-9788 [1] GASKET  
2. 1A-9136 [2] BOLT  
3. 3B-4505 [8] LOCKWASHER  
4. 8H-9789 [1] BEARING  
5. 8H-9718 [1] RETAINER  
6. 5S-7614 [1] GEAR (80 Teeth)  
7. 5S-3828 [1] SLEEVE  
8. 9S-1313 [1] NUT  
9. 7S-9847 [1] WASHER  
10. 0S-1594 [4] BOLT  
  7M-9763 [2] LOCK  
11. 5S-7612 [1] PLATE  
12. 2H-3755 [2] BOLT  
  2F-6156 [1] LOCK  
13. 5S-7660 [1] GEAR ASSEM. (57 Teeth)  
14. 5S-7630 [1] BEARING  
    (Part of 5S7660 Gear Assem.)
15. 5S-7611 [1] LOCK  
16. 0L-1351 [2] BOLT  
17. 5S-7608 [1] SHAFT  
18. 5B-9079 [1] NUT  
19. 8H-9364 [1] GASKET  
20. 7S-5047 [1] SHAFT  
21. 5M-6214 [2] PLUG  
22. 7L-0396 [1] HOUSING ASSEM.  
23. 2H-1190 [3] DOWEL  
24. 3F-6808 [1] DOWEL  
    (Parts of 7L396 Housing Assem.)
25. 8H-9220 [1] GASKET  
26. 1B-9575 [2] BOLT  
27. 0S-1618 [4] BOLT  
 

#UE0700910055
 

8L-4055: INSTRUMENT PANEL GROUP

8L4055 INSTRUMENT PANEL GROUP
Serial No. 66D1 to 379, 381 to 391, 409, 414, 417, 424, 425, 430, 431, 436, 437, 441 and 66D442 inclusive
c101682 UE070091
8L4055 INSTRUMENT PANEL GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-0762 [2] BOLT  
2. 1B-4330 [8] NUT  
  3B-4504 [8] LOCKWASHER  
3. 4L-4615 [1] COVER  
4. 3L-6304 [2] BRACE  
5. 7B-2742 [4] BOLT  
6. 5H-2954 [1] HEAT INDICATOR  
7. 1L-6561 [1] PLUG  
8. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
9. 3B-6769 [1] ELBOW  
10. 7H-4155 [2] SHOCK MOUNT  
11. 4B-1219 [4] SCREW  
  4B-2040 [4] NUT  
  9B-1117 [4] LOCKWASHER  
12. 8L-8877 [1] HOSE ASSEM. (36" Long)  
13. 3B-7896 [1] ELBOW  
14. 3B-9400 [1] FITTING  
15. 0S-1615 [2] BOLT  
16. [4] BOLT  
  3B-4505 [4] LOCKWASHER  
17. 8L-4054 [1] BRACKET  
18. 3L-6302 [1] PANEL ASSEM.  
19. 7H-4155 [2] SHOCK MOUNT  
20. 4B-4305 [4] RIVET  
    (Parts of 3L6302 Panel Assem.)
21. 4J-4710 [4] SPACER  
22. 6H-6699 [1] ADAPTER  
 

#UE0700910056
 

8L-4055: INSTRUMENT PANEL GROUP

8L4055 INSTRUMENT PANEL GROUP
Serial No. 66D380, 392 to 408, 410 to 413, 415, 416, 418 to 423, 426 to 429, 432 to 435, 438 to 440,
443 to 643, 645 to 675, 678 to 720, 722, 724 to 742, 744 to 746, 751, 753, 761 and 66D771 inclusive
c105585 UE070091
8L4055 INSTRUMENT PANEL GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-0762 [2] BOLT  
2. 1B-4330 [8] NUT  
  3B-4504 [8] LOCKWASHER  
3. 4L-4615 [1] COVER  
4. 3L-6304 [2] BRACE  
5. 7B-2742 [4] BOLT  
6. 5H-2954 [1] HEAT INDICATOR  
7. 1L-6561 [1] PLUG  
8. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
9. 3B-6769 [1] ELBOW  
10. 7H-4155 [2] SHOCK MOUNT  
11. 4B-1219 [4] SCREW  
  4B-2040 [4] NUT  
  9B-1117 [4] LOCKWASHER  
12. 8L-8877 [1] HOSE ASSEM. (36" long)  
13. 3L-2875 C [1] CLIP  
  8F-0244 [1] GROMMET  
14. 6H-6699 [1] ADAPTER  
15. 3B-8822 C [1] ELBOW  
16. 3B-6768 C [1] BUSHING  
17. 3B-9400 [1] FITTING  
18. 0S-1615 [2] BOLT  
19. 1F-6296 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
20. 8L-4054 [1] BRACKET  
21. 3L-6302 [1] PANEL ASSEM.  
22. 7H-4155 [2] SHOCK MOUNT  
23. 4B-4305 [4] RIVET  
    (Parts of 3L6302 Panel Assem.)
24. 4J-4710 [4] SPACER  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0700910057
 

1N-8152: PANEL GP-INSTRUMENT

INSTRUMENT PANEL (1N8152 N/S)
Serial No. 66D644, 676, 677, 721, 723, 743, 747 to 750, 752, 754 to 760, 762 to 770 and 66D772 to 66D2512 inclusive
c104925 UE070091
1N8152 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-0762 [2] BOLT  
2. 1B-4330 [8] NUT  
  3B-4504 [8] LOCKWASHER  
3. 4L-4615 [1] COVER  
4. 3L-6304 [2] BRACE  
5. 7B-2742 [4] BOLT  
6. 5M-1065 [1] GAUGE (Engine Oil Pressure)  
7. 2L-6094 [1] ELBOW  
8. 1L-6561 [1] PLUG  
9. 5H-2954 [1] INDICATOR  
10. 7H-4155 [2] SHOCK MOUNT  
11. 4B-1219 [4] SCREW  
  4B-2040 [4] NUT  
  9B-1117 [4] LOCKWASHER  
12. 3L-2875 [1] CLIP  
13. 8F-0244 [1] GROMMET  
14. 0S-1615 [2] BOLT  
15. 6H-6699 [1] ADAPTER  
16. 1F-6296 [4] BOLT  
17. 3B-4505 [4] LOCKWASHER  
18. 8L-4054 [1] BRACKET  
19. 3L-6302 [1] PANEL ASSEM.  
20. 7H-4155 [2] SHOCK MOUNT  
21. 4B-4305 [4] RIVET  
    (Parts of 3L6302 Panel Assem.)
22. 5H-4349 [1] HOSE ASSEM. (22" Long)  
23. 4J-4710 [4] SPACER  
24. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 4H1966 Fitting)
25. 4B-0418 [1] CLIP  
26. 4B-6029 [1] GROMMET  
27. 1N-8144 [1] TUBE  
28. 1L-0477 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 1L477 Fitting)
 

#UE0700910058
 

2N-2260: INSTRUMENT PANEL

INSTRUMENT PANEL (2N2260 N/S)
Serial No. 66D2513 to 66D4718 inclusive
c133273 UE070091
2N2260 INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-6094 [1] ELBOW  
2. 2N-2414 [1] GAUGE (Oil pressure)  
3. 2N-0794 [2] RETAINER  
4. 1L-6561 [1] PLUG  
5. 2H-3755 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  4B-4277 [2] WASHER  
6. 2N-5848 [1] BASE ASSEM.  
7. 2N-2258 [6] RIVET  
8. 7H-4155 [3] SHOCKMOUNT  
    (Parts of 2N5848 Assem.)
9. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
10. 5H-2954 [1] INDICATOR (Water Temperature)  
11. 2N-0179 [1] COVER  
12. 2N-0178 [1] PANEL  
13. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
14. 3L-2875 [1] CLIP  
15. 8F-0244 [1] GROMMET  
16. 6H-6699 [1] ADAPTER  
17. 5L-1393 [1] HOSE ASSEM. (16" long overall)  
18. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 4H1966 Fitting)
19. 4B-6029 [1] GROMMET  
20. 4B-0418 [1] CLIP  
21. 4S-8385 TUBE (Order by the foot) 29"  
22. 1L-0477 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 1L477 Fitting)
 

#UE0700910059
 

2N-2259: PANEL GP-INSTRUMENT

2N2259 INSTRUMENT PANEL GROUP
Serial No. 66D4719 to 66D5994 inclusive. Also available as Attachment effective
with Serial No. 66D5995-Up
c132692 UE070091
2N2259 PANEL GP-INSTRUMENT Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-6561 [1] PLUG  
2. 2N-5848 [1] BASE ASSEM.  
3. 7H-4155 [3] SHOCKMOUNT  
4. 2N-2258 [6] RIVET  
    (Parts of 2N5848 Assem.)
5. 2N-2414 [1] GAUGE (Oil Pressure)  
6. 2N-0794 [2] RETAINER  
7. 2L-6094 [1] ELBOW  
8. 2H-3755 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  4B-4277 [2] WASHER  
9. 9F-6580 [3] BOLT  
  1B-4330 [3] NUT  
  3B-4504 [3] LOCKWASHER  
10. 2N-2412 [1] INDICATOR (Water Temp.)  
11. 2N-0179 [1] COVER  
12. 2N-0178 [1] PANEL  
13. 5S-7348 [2] SCREW  
  4B-2041 [2] NUT  
  9B-1117 [2] LOCKWASHER  
14. 8F-0244 [1] GROMMET  
15. 3L-2875 [1] CLIP  
16. 6H-6699 [1] ADAPTER  
17. 5L-1393 [1] HOSE ASSEM. (16" long overall)  
18. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 4H1966 Fitting)
19. 4B-6029 [1] GROMMET  
20. 4B-0418 [1] CLIP  
21. 4S-8385 H TUBE 25.57"  
22. 6H-5963 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 6H5963 Fitting)
  H   ORDER BY THE FOOT
 

Information:

Engine News
Rod Bearings For Parts Service Have Reliefs (Grooves) Cut On The Outside Diameter
1979/06/20
Keystone Piston Groups Can Be Installed In Earlier Engines In Steiger Tractors
1979/09/19
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston
1980/02/27
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Engine Slobbering; New Piston And Rings Used
1981/10/21
Engine Slobbering; New Piston And Rings Used
1982/10/20
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material
1982/10/20
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
New Piston Ring Group Used
1983/05/25
Remanufactured Connecting Rod Assemblies
1984/02/22
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Oil Control Piston Ring Used In 3300 Family Of Engines
1990/04/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2012/08/15
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/09
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Connecting Rod
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Piston And Rings
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Pistons And Rings<BR> (With Keystone Piston Ring Groove)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pistons And Rings
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Connecting Rod
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Connecting Rods
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Main Bearings And Connecting Rod Bearings
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Pistons
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Pistons
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Connecting Rod Bearings
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston{1214}
1980/01/21
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1981/10/12
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Ring Group Used{1215}
1983/05/30
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Rod Bearings For Parts Service Have Reliefs (Grooves) Cut On The Outside Diameter{1219}
1979/05/21
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Keystone Piston Groups Can Be Installed In Earlier Engines In Steiger Tractors{1214,1215}
1979/09/17
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

Caterpillar Parts SIS Catalog 3306 :

FLYWHEEL GP
8L-5078 FLYWHEEL GP
FLYWHEEL GP
8L-5078 FLYWHEEL GP
FLYWHEEL GROUP
5L-2749 FLYWHEEL GROUP
CRANKSHAFT BEARING REPLACEMENTS
GASKET KITS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT
7L-0258 CRANKSHAFT
CRANKSHAFT
8L-6215 CRANKSHAFT
CAMSHAFT
CAMSHAFT
ENGINE SUPPORT
ENGINE SUPPORT
ENGINE SUPPORT
ENGINE SUPPORT
ACCESSORY DRIVE
7L-0260 ACCESSORY DRIVE
INSTRUMENT PANEL GROUP
8L-4055 INSTRUMENT PANEL GROUP
INSTRUMENT PANEL GROUP
8L-4055 INSTRUMENT PANEL GROUP
PANEL GP-INSTRUMENT
1N-8152 PANEL GP-INSTRUMENT
INSTRUMENT PANEL
2N-2260 INSTRUMENT PANEL

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.