AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8L9650 GOVERNOR GROUP--Part 2 of 2 - Type 1 Part of Fuel Pump Housing and Governor shown on Page 25 3306


FUEL SYSTEM
GOVERNOR GP
OPERATOR STATION
PANEL GP
FUEL SYSTEM
PUMP GP-FUEL TRANSFER
OPERATOR STATION
PANEL GP
FUEL SYSTEM
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 66D
 D333C ENGINE 66D00001-08890 UE070091 3306 66D   (1972)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GROUP
7L-0529 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
 

#UE0700910070
 

8L-9650: GOVERNOR GROUP

8L9650 GOVERNOR GROUP--Part 2 of 2 - Type 1
Part of Fuel Pump Housing and Governor shown on Page 25
c126373 UE070091
8L9650 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4176 [1] COVER ASSEM  
2. 8L-4153 [1] LEVER  
3. 8L-4158 [1] SHAFT  
4. 1S-7984 [1] BEARING  
5. 2M-2489 [2] SEAL  
6. 1S-7336 [2] LOCK  
7. 8L-4152 [1] LEVER  
8. 0S-1614 [4] BOLT  
    (Parts of 8L4176 Cover Assem.)
9. 2S-7307 [2] INSULATOR  
10. 2S-7387 [1] SCREW  
11. 8L-8883 [1] SHAFT  
12. 4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [2] WASHER  
13. 2B-2695 [1] BOLT  
14. 3F-9556 [3] WASHER  
15. 1B-2714 [2] BOLT  
16. 1B-4330 [2] NUT  
17. 3B-4504 [2] LOCKWASHER  
18. 8L-4174 [1] PLATE ASSEM.  
19. 8L-4175 [1] DOWEL  
    (Part of 8L4174 Plate Assem.)
20. 2L-1352 [2] BOLT  
21. 9M-1216 [1] PLUNGER  
22. 9F-4522 [1] GASKET  
23. 1S-9312 [1] SPRING  
24. 9M-4690 [1] PLUG  
25. 9M-9788 [1] PLUNGER  
26. 3S-1542 [1] SCREW  
27. 2J-0157 [2] SEAL  
28. 5L-8992 [1] COVER  
29. 6L-1756 [1] BOLT (Drilled Head)  
  4B-9747 [3] WASHER  
30. 1B-9575 [1] BOLT  
31. 5L-8991 [1] GASKET  
32. 3S-1494 [1] SCREW  
33. 5H-1351 [1] PIN  
34. 4L-9971 [1] SPRING  
35. 0S-1082 [2] BOLT  
36. 6L-1597 [1] GASKET  
 

#UE0700910071
 

8L-9650: GOVERNOR GROUP

8L9650 GOVERNOR GROUP--Part 1 of 2--Type 2
Part of 8L9652 Fuel Pump Housing and Governor Group shown on Pages 25 & 25A
c153054 UE070091
8L9650 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4156 [1] GASKET  
2. 9S-4673 C [1] BAND ASSEM.  
3. 9S-4468 C [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 9M-6302 [2] WASHER  
6. 9M-6303 [1] SPRING  
7. 2S-0008 [1] SEAT  
8. 2S-0007 [1] SLEEVE  
9. 7B-8105 [1] LOCK  
10. 2N-0479 [1] WEIGHT ASSEM.  
    (Includes)
  2N-0477 [2] WEIGHT  
11. 1S-5540 [2] DOWEL  
12. 9M-6293 [1] LOCK  
13. 0S-1615 [3] BOLT  
14. 2P-8725 C [1] PISTON ASSEM.  
    (Includes)
  7S-8447 [1] PISTON ASSEM.  
15. 1S-4741 [1] CYLINDER  
16. 7L-8777 [1] SLEEVE  
17. 8M-8997 [1] SEAL  
18. 6N-1425 C [1] HOUSING ASSEM.  
    (Includes)
19. 4F-4585 [1] PLUG  
20. 8M-8403 [1] GUIDE  
21. 9S-4671 [1] SEAL  
  9S-0798 [1] BEARING  
22. 8S-0134 [1] BEARING  
23. 3K-0810 [1] RING  
24. 7M-7219 [1] BEARING  
25. 7M-7193 [2] RACE  
26. 8M-8993 [1] RING  
27. 8M-8726 [1] DOWEL  
28. 6N-3504 C [1] SEAT  
29. 8H-9181 [1] SPRING  
30. 8M-8739 [1] BOLT  
31. 3L-5987 [2] COVER  
32. 8L-3873 [2] GASKET  
33. 8L-4159 [1] GASKET  
34. 8L-4154 [1] COLLAR  
35. 9M-4704 [1] SCREW  
36. 8L-4155 [1] SCREW  
37. 5S-9607 [1] NUT  
38. 8L-4308 [2] BOLT (drilled hole)  
39. 3F-9556 [2] WASHER  
40. 2S-7289 [1] COLLAR  
41. 2S-7235 [1] SPRING  
  C   INDICATES CHANGE
 

#UE0700910072
 

8L-9650: GOVERNOR GROUP

8L9650 GOVERNOR GROUP--Part 2 of 2--Type 2
Part of 8L9652 Fuel Pump Housing and Governor Group shown on Pages 25 & 25A
c153055 UE070091
8L9650 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4176 [1] COVER ASSEM.  
    (Includes)
2. 8L-4153 [1] LEVER  
3. 8L-4158 [1] SHAFT  
4. 1S-7984 [1] BEARING  
5. 2M-2489 [2] SEAL  
6. 1S-7336 [2] LOCK  
7. 8L-4152 [1] LEVER  
8. 0S-1614 [4] BOLT  
9. 2S-7307 [2] INSULATOR  
10. 2S-7387 [1] SCREW  
11. 8L-8883 [1] SHAFT  
12. 4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [2] WASHER  
13. 2B-2695 [1] BOLT  
14. 3F-9556 [3] WASHER  
15. 1B-2714 [2] BOLT  
16. 1B-4330 [2] NUT  
17. 3B-4504 [2] LOCKWASHER  
18. 8L-4174 [1] PLATE ASSEM.  
    (Includes)
19. 8L-4175 [1] DOWEL  
20. 2L-1352 [2] BOLT  
21. 5L-8991 [1] GASKET  
22. 1B-9575 [1] BOLT  
23. 6L-1597 [1] GASKET  
24. 0S-1082 [2] BOLT  
25. 3S-1494 [1] SCREW  
26. 3S-1542 [1] SCREW  
27. 2J-0157 [2] SEAL  
28. 5L-8992 [1] COVER  
29. 6L-1756 [1] BOLT (drilled head)  
  4B-9747 [3] WASHER  
30. 4N-4063 [1] LEVER ASSEM.  
    (Includes)
  9S-4466 [1] LEVER ASSEM.  
31. 9M-9788 [1] PLUNGER  
32. 4L-9971 [1] SPRING  
33. 5H-1351 [1] PIN  
34. 2N-4386 [1] COVER  
 

#UE0700910073
 

8L-9650: GOVERNOR GROUP

8L9650 GOVERNOR GROUP--Part 1 of 2--Type 3
Part of 8L9652 Fuel Pump Housing and Governor Group shown on Pages 25 & 25A
c161047 UE070091
8L9650 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4156 [1] GASKET  
2. 9S-4673 [1] BAND ASSEM.  
3. 9S-4468 [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 9M-6302 [2] WASHER  
6. 9M-6303 [1] SPRING  
7. 6N-8629 C [1] SEAT  
8. 2S-0007 [1] SLEEVE  
9. 7B-8105 [1] LOCK  
10. 2N-0479 [1] WEIGHT ASSEM.  
    (Includes)
  2N-0477 [2] WEIGHT  
11. 1S-5540 [2] DOWEL  
12. 9M-6293 [1] LOCK  
13. 0S-1615 [3] BOLT  
14. 2P-8725 [1] PISTON ASSEM.  
    (Includes)
  7S-8447 [1] PISTON ASSEM.  
15. 1S-4741 [1] CYLINDER  
16. 7L-8777 [1] SLEEVE  
17. 8M-8997 [1] SEAL  
18. 6N-1425 [1] HOUSING ASSEM.  
    (Includes)
19. 4F-4585 [1] PLUG  
20. 8M-8403 [1] GUIDE  
21. 9S-4671 [1] SEAL  
  9S-0798 [1] BEARING  
22. 8S-0134 [1] BEARING  
23. 3K-0810 [1] RING  
24. 7M-7219 [1] BEARING  
25. 7M-7193 [2] RACE  
26. 2P-8630 C [1] DOWEL  
27. 4N-3887 C [1] RING  
28. 6N-3504 [1] SEAT  
29. 8H-9181 [1] SPRING  
30. 8M-8739 [1] BOLT  
31. 3L-5987 [2] COVER  
32. 8L-3873 [2] GASKET  
33. 8L-4159 [1] GASKET  
34. 8L-4154 [1] COLLAR  
35. 9M-4704 [1] SCREW  
36. 8L-4155 [1] SCREW  
37. 1B-4201 C [1] NUT  
38. 8L-4308 [2] BOLT (drilled hole)  
39. 3F-9556 [2] WASHER  
40. 2S-7289 [1] COLLAR  
41. 2S-7235 [1] SPRING  
  C   INDICATES CHANGE
 

#UE0700910074
 

8L-9650: GOVERNOR GROUP

8L9650 GOVERNOR GROUP--Part 2 of 2--Type 3
Part of 8L9652 Fuel Pump Housing and Governor Group shown on Pages 25 & 25A
c153055 UE070091
8L9650 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4176 [1] COVER ASSEM.  
    (Includes)
2. 8L-4153 [1] LEVER  
3. 8L-4158 [1] SHAFT  
4. 1S-7984 [1] BEARING  
5. 2M-2489 [2] SEAL  
6. 1S-7336 [2] LOCK  
7. 8L-4152 [1] LEVER  
8. 0S-1614 [4] BOLT  
9. 2S-7307 [2] INSULATOR  
10. 2S-7387 [1] SCREW  
11. 8L-8883 [1] SHAFT  
12. 4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [2] WASHER  
13. 2B-2695 [1] BOLT  
14. 3F-9556 [3] WASHER  
15. 1B-2714 [2] BOLT  
16. 1B-4330 [2] NUT  
17. 3B-4504 [2] LOCKWASHER  
18. 8L-4174 [1] PLATE ASSEM.  
    (Includes)
19. 8L-4175 [1] DOWEL  
20. 2L-1352 [2] BOLT  
21. 5L-8991 [1] GASKET  
22. 1B-9575 [1] BOLT  
23. 6L-1597 [1] GASKET  
24. 0S-1082 [2] BOLT  
25. 3S-1494 [1] SCREW  
26. 3S-1542 [1] SCREW  
27. 2J-0157 [2] SEAL  
28. 5L-8992 [1] COVER  
29. 6L-1756 [1] BOLT (drilled head)  
  4B-9747 [3] WASHER  
30. 4N-4063 [1] LEVER ASSEM.  
    (Includes)
  9S-4466 [1] LEVER ASSEM.  
31. 9M-9788 [1] PLUNGER  
32. 4L-9971 [1] SPRING  
33. 5H-1351 [1] PIN  
34. 2N-4386 [1] COVER  
 

#UE0700910075
 

2S-0423: SERVICE METER GROUP

2S423 SERVICE METER GROUP
Serial No. 66D1 to 66D6727 inclusive
c125451 UE070091
2S0423 SERVICE METER GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-0403 [1] HOUSING ASSEM.  
  8H-5254 [1] GEAR (48 TEETH)  
    (PART OF COUNTER ASSEM. 8H5255)
  9B-2232 [1] CAP  
  2S-1270 [1] BEARING  
    (PART OF HOUSING ASSEM 2S403)
  9M-3866 [1] GASKET  
  4S-7001 C [1] RETAINER ASSEM.  
  8H-5255 [1] COUNTER ASSEM.  
  8H-5961 [1] COUNTER  
    (PART OF COUNTER ASSEM. 8H5255)
  9M-7660 [1] GASKET  
  8H-5124 [1] PLATE  
  7B-3028 [2] SCREW  
    (PARTS OF HOUSING ASSEM. 2S403)
  2B-2695 H [1] BOLT  
  3B-4505 H [1] LOCKWASHER  
  2S-0407 [1] SHAFT  
  4F-7391 H [1] SEAL  
  9M-4256 [1] BEARING  
    (PART OF HOUSING ASSEM. 2S403)
  1S-3365 [1] WINDOW  
  3S-9557 [4] SCREW  
  1D-4539 H [1] BOLT  
  3B-4505 H [1] LOCKWASHER  
  C   INDICATES CHANGE FROM PREVIOUS
  H   NOT PART OF 2S423 SERVICE METE
 

#UE0700910076
 

7L-0543: FUEL TRANSFER PUMP GROUP

7L543 FUEL TRANSFER PUMP GROUP (7L247 N/S)
Serial No. 66D1 to 66D6727 inclusive
c105125 UE070091
7L0543 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth)  
3. 6J-2419 [2] SEAL  
4. 7S-4439 [1] RING  
5. 7S-4434 [1] BODY ASSEM.  
6. 8F-6058 [1] BEARING  
7. 2S-6838 [1] SHAFT  
    (Parts of 7S4434 Body Assem.)
8. 8S-4368 [1] GEAR (Idler 10 Teeth)  
9. 8L-6295 [1] COVER ASSEM.  
10. 8S-5575 [1] SEAL  
11. 7S-4433 [2] FERRULE  
    (Parts of 8L6295 Cover Assem.)
12. 7H-3171 [1] PLUG  
13. 8S-4373 [1] SHAFT ASSEM.  
14. 8S-4368 [1] GEAR (Drive 10 Teeth)  
    (Part of 8S4373 Shaft Assem.)
15. 9F-6641 [6] SCREW  
16. 4B-3388 H [2] BOLT  
17. 3B-4505 H [2] LOCKWASHER  
18. 7S-2374 [1] GASKET  
19. 8S-4375 [1] CAGE ASSEM.  
20. 8F-6058 [1] BEARING  
21. 4S-7756 [2] SEAL  
    (Parts of 8S4375 Cage Assem.)
22. 3H-1489 [1] KEY  
23. 8B-1261 H [1] TEE  
24. 3B-7738 H [1] NIPPLE  
25. 4D-9986 H [1] SEAL  
26. 4M-8303 H [1] SEAL  
27. 7S-4441 H [1] ADAPTER (Service Meter)  
  H   NOT PART OF 7L543 TRANSFER PUM
 

#UE0700910077
 

9S-8732: SERVICE METER

SERVICE METER (9S8732 N/S)
Serial No. 66D6728-Up
c135443 UE070091
9S8732 SERVICE METER Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-3033 [1] CLAMP  
2. 9S-3032 [1] CLAMP  
3. 4M-8303 [1] SEAL  
4. 1T-0416 [2] BOLT  
  3F-9556 [2] LOCKWASHER  
5. 9S-8722 [1] SERVICE METER ASSEM.  
  1P-4923 [1] KIT (Service Meter Window)  
    (Includes Window, Gasket and Screws)
 

#UE0700910078
 

7L-0543: FUEL TRANSFER PUMP GROUP

7L543 FUEL TRANSFER PUMP GROUP (7L247 N/S)
Serial No. 66D6728-Up
c141194 UE070091
7L0543 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth)  
3. 6J-2419 [2] SEAL  
4. 7S-4439 [1] RING  
5. 7S-4434 [1] BODY ASSEM.  
6. 8F-6058 [1] BEARING  
7. 2S-6838 [1] SHAFT  
8. 8S-4368 [1] GEAR (Idler 10 Teeth)  
9. 8L-6295 [1] COVER ASSEM.  
10. 8S-5575 [1] SEAL  
11. 7S-4433 [2] FERRULE  
12. 7H-3171 [1] PLUG  
13. 8S-4373 [1] SHAFT ASSEM.  
14. 8S-4368 [1] GEAR (Drive 10 Teeth)  
15. 9F-6641 [6] SCREW  
16. 4B-3388 H [2] BOLT  
17. 3B-4505 H [2] LOCKWASHER  
18. 7S-2374 H [1] GASKET  
19. 8S-4375 [1] CAGE ASSEM.  
20. 8F-6058 [1] BEARING  
21. 4S-7756 [2] SEAL  
22. 3H-1489 [1] KEY  
23. 8B-1261 H [1] TEE  
24. 3B-7738 H [1] NIPPLE  
  H   NOT PART OF 7L543 TRANSFER PUM
 

#UE0700910079
 

7L-0261: FILTER & PRM GP

FUEL FILTER AND PRIMING PUMP (7L261 N/S)
Serial No. 66D1 to 66D859 inclusive
9H2256 Fuel Priming Pump parts are shown on Page 30A-2
c145788 UE070091
7L0261 FILTER & PRM GP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG  
2. 7L-7451 [1] BASE ASSEM.  
    (Includes)
  4S-8447 [1] STUD  
3. 4M-5317 [1] BUSHING  
4. 6D-0238 [1] VALVE ASSEM.  
5. 0S-1591 [1] BOLT (1.50 in. long)  
  1D-4717 [1] NUT  
6. 0S-1588 [3] BOLT (1.250 in. long)  
7. 3B-4506 [4] LOCKWASHER  
8. 4B-4278 [4] WASHER  
9. 7L-7368 [1] GASKET  
10. 8L-8612 [1] TANK ASSEM. (top)  
11. 6L-7440 [1] FILTER ASSEM.  
12. 6L-7611 [1] FITTING  
13. 7H-9922 [1] SPRING  
14. 2F-4355 [1] STOP  
15. 1F-5842 [1] BOLT  
16. 3B-4505 [5] LOCKWASHER  
17. 4B-4277 [5] WASHER  
18. 9M-4608 [1] PLUNGER ASSEM.  
19. 4B-5647 [1] GASKET  
20. 1B-2790 [3] BOLT  
21. 7L-7364 [1] GASKET  
22. 7L-0442 [1] TUBE (6.76 in. long-outlet)  
23. 9H-2256 Y [1] FUEL PRIMING PUMP ASSEM.  
    (Separate Illustration)
24. 3B-8998 [3] FITTING  
    (Each Includes)
25. 1F-1344 [1] NUT  
26. 7L-0436 [1] SUPPORT  
27. 1H-7922 [1] FITTING  
    (Includes)
28. 1F-1344 [1] NUT  
29. 7B-6368 [1] BALL  
30. 7B-6365 [1] SPRING  
31. 7B-7840 [1] RETAINER  
32. 7L-0399 [1] TUBE (8.13 in. long-inlet)  
33. 3B-7721 [1] BUSHING  
34. 7L-7363 [1] GASKET  
35. 1B-9575 [1] BOLT  
36. 7L-7434 [1] TANK (bottom)  
37. 9H-4557 [2] SEAL  
38. 7L-7345 [1] SLEEVE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fuel Transfer Pump Improved
1985/11/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
If The Fuel Setting Dimension Is More Than 7.00 MM, Remove The End Play Of The Camshaft To Make The Fuel Setting{1257,1286}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3306 :

GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
7L-0529 GOVERNOR GROUP
GOVERNOR GROUP
7L-0529 GOVERNOR GROUP
STOP GP-RACK
2S-9519 STOP GP-RACK
STOP GP-RACK
2S-9519 STOP GP-RACK
FUEL PUMP HOUSING AND GOVERNOR
8L-9652 FUEL PUMP HOUSING AND GOVERNOR
STOP GP-RACK
2S-9519 STOP GP-RACK
FUEL PUMP HOUSING AND GOVERNOR GROUP
8L-9652 FUEL PUMP HOUSING AND GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
SERVICE METER GROUP
2S-0423 SERVICE METER GROUP
FUEL TRANSFER PUMP GROUP
7L-0543 FUEL TRANSFER PUMP GROUP
SERVICE METER
9S-8732 SERVICE METER
FUEL TRANSFER PUMP GROUP
7L-0543 FUEL TRANSFER PUMP GROUP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.