AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FUEL INJECTION VALVES AND LINES (1N5790 N/S) Serial No. 66D928 to 66D5142 inclusive 3306 INDUSTRIAL ENGINE


FUEL SYSTEM
LINES GP-FUEL
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
COOLING SYSTEM
COOLER GP

INDUSTRIAL ENGINE 3306 INDUSTRIAL ENGINE 66D
 D333C ENGINE 66D00001-08890 UE070091 3306 66D   (1972)

FUEL SYSTEM

LINES GP-FUEL
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
1N-5790 FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
1N-5790 FUEL INJECTION VALVES AND LINES
FUEL INJECTION LINES GROUP
1N-5824 FUEL INJECTION LINES GROUP
FUEL INJECTION VALVES AND LINES
1N-5790 FUEL INJECTION VALVES AND LINES
FLEXIBLE FUEL LINES GROUP
8L-4454 FLEXIBLE FUEL LINES GROUP
 

#UE0700910090
 

1N-5790: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (1N5790 N/S)
Serial No. 66D928 to 66D5142 inclusive
c109211 UE070091
1N5790 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-5406 [1] LINE ASSEM. (No. 6)  
2. 1N-5404 [1] LINE ASSEM. (No. 4)  
3. 1N-5403 [1] LINE ASSEM. (No. 3)  
4. 1N-5402 [1] LINE ASSEM. (No. 2)  
5. 1N-5401 [1] LINE ASSEM. (No. 1)  
6. 5H-7225 [6] NUT  
7. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 4H1966 Fitting)
8. 8L-4450 [1] TUBE  
9. 2B-2404 [1] CLIP  
10. 0S-0509 [1] BOLT  
11. 3B-4506 [6] LOCKWASHER  
12. 0S-1588 [2] BOLT  
13. 8M-5248 [1] SEAL (Large)  
14. 8M-5260 [1] SEAL (Small)  
15. 0S-1594 [1] BOLT  
16. 8M-4987 [1] SEAL  
17. 0S-1608 [1] BOLT  
18. 0L-1352 [1] BOLT  
19. 8M-5253 [1] SEAL  
20. 3L-1850 [1] PLUG  
21. 7L-0929 [1] BRACKET  
22. 3B-7896 [1] ELBOW  
23. 4S-6574 [1] GAUGE (Fuel Pressure)  
24. 0S-1615 [5] BOLT  
  1B-4330 [5] NUT  
  3B-4504 [5] LOCKWASHER  
25. 6F-8868 [10] CLAMP  
26. 1N-5405 [1] LINE ASSEM. (No. 5)  
27. 8S-2389 [6] BODY  
28. 7S-9891 [6] VALVE SERVICE GROUP  
29. 5B-3718 [6] SEAL  
30. 6F-1069 [6] SEAL ASSEM.  
    (1 in each 7S9891 Group)
 

#UE0700910091
 

1N-5790: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (1N5790 N/S)
Serial No. 66D5143 to 66D7159 inclusive
c134057 UE070091
1N5790 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-5406 [1] LINE ASSEM. (No. 6)  
2. 1N-5404 [1] LINE ASSEM. (No. 4)  
3. 1N-5403 [1] LINE ASSEM. (No. 3)  
4. 1N-5402 [1] LINE ASSEM. (No. 2)  
5. 1N-5401 [1] LINE ASSEM. (No. 1)  
6. 5H-7225 [6] NUT  
7. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (Parts of 4H1966 Fitting)
8. 8L-4450 [1] TUBE  
9. 2B-2404 [1] CLIP  
10. 0S-0509 [1] BOLT  
11. 3B-4506 [6] LOCKWASHER  
12. 0S-1588 [2] BOLT  
13. 8M-5248 [1] SEAL (Large)  
14. 8M-5260 [1] SEAL (Small)  
15. 0S-1594 [1] BOLT  
16. 8M-4987 [1] SEAL  
17. 0S-1608 [1] BOLT  
18. 0L-1352 [1] BOLT  
19. 8M-5253 [1] SEAL  
20. 7H-3171 [1] PLUG  
21. 2N-6517 [1] BRACKET  
22. 3B-7896 [1] ELBOW  
23. 4S-6574 [1] GAUGE (Fuel Pressure)  
24. 0S-1615 [5] BOLT  
  1B-4330 [5] NUT  
  3B-4504 [5] LOCKWASHER  
25. 6F-8868 [10] CLAMP  
26. 1N-5405 [1] LINE ASSEM. (No. 5)  
27. 8S-2389 [6] BODY  
28. 7S-9891 [6] VALVE SERVICE GROUP  
29. 5B-3718 [1] SEAL  
30. 6F-1069 [1] SEAL ASSEM.  
31. 3L-1850 [1] PLUG  
 

#UE0700910092
 

1N-5824: FUEL INJECTION LINES GROUP

1N5824 FUEL INJECTION LINES GROUP--Field Installation
Serial No. 66D1 to 66D927 inclusive. Note: This Group cannot be used for
Fuel Injection Lines shown within 7L931 Water Shielded Manifold
c142512 UE070091
1N5824 FUEL INJECTION LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-5406 [1] LINE ASSEM. (No. 6)  
2. 0S-1615 [5] BOLT  
  1B-4330 [5] NUT  
  3B-4504 [5] LOCKWASHER  
3. 6F-8868 [10] CLAMP  
4. 1N-5405 [1] LINE ASSEM. (No. 5)  
5. 1N-5557 [1] SHIELD  
6. 1N-5404 [1] LINE ASSEM. (No. 4)  
7. 1N-5403 [1] LINE ASSEM. (No. 3)  
8. 1N-5402 [1] LINE ASSEM. (No. 2)  
9. 1N-5401 [1] LINE ASSEM. (No. 1)  
 

#UE0700910093
 

1N-5790: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (1N5790 N/S)
Serial No. 66D7160-Up
c139589 UE070091
1N5790 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-5406 [1] LINE ASSEM. (No. 6)  
2. 1N-5404 [1] LINE ASSEM. (No. 4)  
3. 1N-5403 [1] LINE ASSEM. (No. 3)  
4. 1N-5402 [1] LINE ASSEM. (No. 2)  
5. 1N-5401 [1] LINE ASSEM. (No. 1)  
6. 5H-7225 [6] NUT  
7. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
8. 8L-4450 [1] TUBE  
9. 2B-2404 [1] CLIP  
10. 0S-0509 [1] BOLT  
11. 3B-4506 [6] LOCKWASHER  
12. 0S-1588 [2] BOLT  
13. 8M-5248 [1] SEAL (Large)  
14. 8M-5260 [1] SEAL (Small)  
15. 0S-1594 [1] BOLT  
16. 8M-4987 [1] SEAL  
17. 0S-1608 [1] BOLT  
18. 0S-1619 C [1] BOLT  
19. 8M-5253 [1] SEAL  
20. 7H-3171 [1] PLUG  
21. 3N-3696 C [1] BRACKET  
22. 3B-7896 [1] ELBOW  
23. 4S-6574 [1] GAUGE (Fuel Pressure)  
24. 0S-1615 [5] BOLT  
  1B-4330 [5] NUT  
  3B-4504 [5] LOCKWASHER  
25. 6F-8868 [10] CLAMP  
26. 1N-5405 [1] LINE ASSEM. (No. 5)  
27. 8S-2389 [6] BODY  
28. 7S-9891 [6] VALVE SERVICE GROUP  
29. 5B-3718 [1] SEAL  
30. 6F-1069 [1] SEAL ASSEM.  
31. 3L-1850 [1] PLUG  
  C   INDICATES CHANGE
 

#UE0700910094
 

7S-9461: GEAR PUMP GROUP

7S9461 GEAR PUMP GROUP
Serial No. 66D1 to 66D1420 inclusive
Part of Oil Pump shown on Page 34
c105528 UE070091
7S9461 GEAR PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-0488 [1] BODY ASSEM.  
  8S-6511 [2] BEARING  
    (PART OF 8S488 BODY ASSEM.)
  0L-1352 [2] BOLT (3.25" LONG)  
  0L-0364 [2] LOCK  
  0S-1619 [1] BOLT (3" LONG)  
  5B-9603 [1] BOLT (5" LONG)  
  8S-8871 [1] LOCK  
  2H-3755 [2] BOLT  
  2A-5328 [2] LOCK  
  2S-9529 [1] PLUNGER  
  1S-3921 [1] SPRING  
  8S-0496 [1] COVER  
  8M-5599 [2] KEY  
  8S-0486 [1] SPACER  
  1M-3735 [2] DOWEL  
    (PART OF 8S488 BODY ASSEM.)
  4B-9880 [1] BALL  
  1F-1006 [1] DOWEL  
    (PARTS OF 8S485 BODY ASSEM.)
  9S-1160 [1] BEARING  
    (PART OF 9S1179 GEAR ASSEM.)
  7S-6309 [1] SHAFT ASSEM.  
    (PART OF 8S485 BODY ASSEM.)
  6F-7172 [1] DOWEL  
    (PART OF 7S6309 SHAFT ASSEM.)
  9S-1179 [1] GEAR ASSEM.  
    (69 TEETH-IDLER)
  8S-0494 [1] SHAFT ASSEM.  
    (8 TEETH)
  3B-6734 [1] NUT  
  6B-0863 [1] WASHER  
  3B-4617 [1] COTTER PIN  
  8S-0497 [1] GEAR  
    (40 TEETH-DRIVE)
  8S-0493 [1] SHAFT ASSEM.  
    (8 TEETH)
  8S-6511 [2] BEARING  
    (PART OF 8S485 BODY ASSEM.)
  8S-0485 [1] BODY ASSEM.  
  8S-0491 [2] GEAR  
    (8 TEETH)
 

#UE0700910095
 

7S-9461: GEAR PUMP GROUP

7S9461 GEAR PUMP GROUP--Double Section
Serial No. 66D1421-Up
Part of 8S5022 Oil Pump Group shown on Page 34
c205667 UE070091
7S9461 GEAR PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9603 [ 1] BOLT (5" long)  
2. 0S-1619 [ 1] BOLT (3" long)  
3. 0L-0364 [ 2] LOCK  
4. 0L-1352 [ 2] BOLT (3.25" long)  
5. 8S-8871 [ 1] LOCK  
6. 8S-0486 C [ 1] SPACER  
7. 1B-8709 C [ 1] KEY  
8. 9S-3040 [ 1] SHAFT ASSEM. (8 Teeth)  
9. 8M-5599 C [ 1] KEY  
10. 8S-0485 [ 1] BODY ASSEM.  
11. 1F-1006 [ 1] DOWEL  
12. 4B-9880 [ 1] BALL  
13. 8S-6511 [ 2] BEARING  
14. 7S-6309 [ 1] SHAFT ASSEM.  
15. 6F-7172 [ 1] DOWEL  
16. 8S-0497 [ 1] GEAR (40 Teeth-Drive)  
17. 6B-0863 [ 1] WASHER  
18. 3B-6734 [ 1] NUT  
19. 3B-4617 [ 1] COTTER PIN  
20. 9S-1179 [ 1] GEAR ASSEM. (69 Teeth-Idler)  
21. 9S-1160 [ 1] BEARING  
22. 8S-0493 [ 1] SHAFT ASSEM. (8 Teeth)  
23. 8S-0491 [ 2] GEAR (8 Teeth)  
24. 8S-0488 [ 1] BODY ASSEM.  
25. 8S-6511 [ 2] BEARING  
26. 1M-3735 [ 2] DOWEL  
27. 2S-9529 [ 1] PLUNGER  
28. 1S-3921 [ 1] SPRING  
29. 8S-0496 [ 1] COVER  
30. 2H-3755 [ 2] BOLT  
31. 2A-5328 [ 2] LOCK  
    INDICATES CHANGE
 

#UE0700910096
 

8S-5022: OIL PUMP

OIL PUMP (8S5022 N/S)
7S9461 Pump parts are shown on Pages 33A & 33B
c115887 UE070091
8S5022 OIL PUMP Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0102 [ 1] BOLT  
  0L-0364 [ 1] LOCK  
2. 0S-1590 [ 4] BOLT  
3. 6H-4208 [ 1] LOCK  
4. 7S-9461 Y [ 1] GEAR PUMP  
5. 7H-1861 [ 2] LOCK  
6. 1A-2029 [ 2] BOLT  
7. 0T-0329 [ 1] LOCK  
8. 8M-0904 [ 1] GASKET  
9. 8S-8874 [ 1] LOCK  
10. 0S-1594 [ 2] BOLT  
11. 2P-2221 [ 1] ELBOW ASSEM.  
12. 4B-3938 [ 2] PLUG  
13. 7H-1796 [ 1] GASKET  
14. 8S-5015 [ 1] BELL ASSEM.  
    SEPARATE ILLUSTRATION
 

#UE0700910097
 

7L-6925: FILTER AS-OIL

7L6925 OIL FILTER ASSEMBLY
Serial No. 66D1137 to 66D4555 inclusive
Part of Oil Cooler and Oil Filter shown on Pages 34D & 34E
c127701 UE070091
7L6925 FILTER AS-OIL Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] ELEMENT ASSEM.  
2. [1] GASKET  
3. [1] SEAL  
4. [1] WASHER  
5. C [1] BASE  
6. [1] SCREW  
7. [1] RING  
8. [1] CASE ASSEM.  
9. [1] RING  
10. [1] SPRING  
11. [1] PLUG  
  [1] GASKET  
12. [1] RETAINER  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0700910098
 

9L-5466: OIL FILTER ASSEMBLY

9L5466 OIL FILTER ASSEMBLY
Serial No. 66D4556 to 66D6008
Part of Oil Cooler and Oil Filter shown on Page 34F
c132248 UE070091
9L5466 OIL FILTER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] ELEMENT ASSEM.  
2. [1] GASKET  
3. [1] SEAL  
4. [1] WASHER  
5. [1] BASE  
6. [1] SCREW  
7. [1] RING  
8. [1] CASE ASSEM.  
9. [1] RING  
10. [1] SPRING  
11. [1] PLUG  
  [1] GASKET  
12. [1] RETAINER  
 

#UE0700910099
 

7L-6925: FILTER AS-OIL

7L6925 OIL FILTER ASSEMBLY
Effective with Serial No. 66D6009
Part of Oil Cooler and Oil Filter shown on Page 34G
c135102 UE070091
7L6925 FILTER AS-OIL Parts scheme
  For full view, you need register

Parts for your 3306 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-0484 [ 1] ELEMENT ASSEM.  
2. 2M-8691 [ 1] GASKET  
3. 3H-4970 [ 1] SEAL  
4. 1K-0505 [ 1] WASHER  
5. 2N-8016 [ 1] BASE  
6. 7S-6636 [ 1] SCREW  
7. 5H-9899 [ 1] RING  
8. 5S-7128 [ 1] CASE ASSEM.  
9. 2J-6356 [ 1] RING  
10. 7S-6746 [ 1] SPRING  
11. 2H-8829 [ 1] PLUG  
  6F-7062 [ 1] GASKET  
12. 7S-6745 [ 1] RETAINER  
 

Information:

Engine News
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank
1979/03/07
New Fuel Injection Nozzle Assembly Used
1980/01/23
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System
1980/02/06
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage
1980/03/12
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Improved Water Separator Group Used
1982/06/16
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Disassembly and Assembly
Fuel Injection Valves
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage{1252}
1980/03/24
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Improved Water Separator Group Used {1263}
1982/05/31
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14

Caterpillar Parts SIS Catalog 3306 :

FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL PUMP HOUSING GROUP
3N-3390 FUEL PUMP HOUSING GROUP
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
SEPARATOR GP-WATER
7N-0950 SEPARATOR GP-WATER
FUEL PRIMING PUMP ASSEMBLY
9H-2256 FUEL PRIMING PUMP ASSEMBLY
FILTER & PRM GP
7L-0261 FILTER & PRM GP
FUEL INJECTION VALVES AND LINES
1N-5790 FUEL INJECTION VALVES AND LINES
FUEL INJECTION LINES GROUP
1N-5824 FUEL INJECTION LINES GROUP
FUEL INJECTION VALVES AND LINES
1N-5790 FUEL INJECTION VALVES AND LINES
GEAR PUMP GROUP
7S-9461 GEAR PUMP GROUP
GEAR PUMP GROUP
7S-9461 GEAR PUMP GROUP
OIL PUMP
8S-5022 OIL PUMP
FILTER AS-OIL
7L-6925 FILTER AS-OIL
OIL FILTER ASSEMBLY
9L-5466 OIL FILTER ASSEMBLY

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.