ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGSTARTING MOTOR GP
GLOW PLUG GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING#UE0700910230
3N-1382: ALTERNATOR ASSEMBLY
3N1382 ALTERNATOR ASSEMBLY--12 Volt--Field Installation
Replaced by 3N1384 shown on Page 48P
Replaced by 3N1384 shown on Page 48P
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS#UE0700910231
3N-1381: ALTERNATOR ASSEMBLY
3N1381 ALTERNATOR ASSEMBLY--24 Volt--Field Installation
#UE0700910232
3N-1384: ALTERNATOR ASSEMBLY
3N1384 ALTERNATOR ASSEMBLY--12 Volt--Field Installation
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS#UE0700910233
8L-5005: ALTERNATOR AND DRIVE GROUP
8L5005 ALTERNATOR AND DRIVE GROUP--24 Volt, 35 Ampere
FOR USE WITH FAN DRIVE
Only separate parts serviced. When complete Group is
required order 1N9931 shown on Page 48-3
FOR USE WITH FAN DRIVE
Only separate parts serviced. When complete Group is
required order 1N9931 shown on Page 48-3
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8L-9655 | [1] | HOUSING (Front) | |
2. | 8L-9657 | [1] | RETAINER (Front) | |
3. | 5L-7200 | [3] | SCREW | |
4. | 8L-9663 | [1] | SEAL | |
5. | 8L-4529 H | [1] | PULLEY | |
6. | 8L-9357 | [1] | NUT | |
5D-3184 | [1] | LOCKWASHER | ||
7. | 1B-8704 | [1] | KEY | |
8. | 8L-9707 | [1] | SPACER | |
9. | 7M-3842 | [1] | BEARING ASSEM. | |
10. | 8L-9656 | [1] | WASHER | |
11. | 8L-9708 | [1] | FAN | |
12. | 8L-9360 | [4] | BOLT | |
13. | 8L-9368 | [1] | HOUSING (Rear) | |
14. | 8L-9355 | [1] | RETAINER | |
15. | 8L-9348 | [1] | INSULATOR | |
16. | 8L-9706 | [1] | SPACER | |
17. | 8L-9362 | [1] | GASKET | |
18. | 8L-9364 | [1] | BRUSH ASSEM. | |
19. | 8L-9381 | [2] | SCREW | |
20. | 8L-9361 | [1] | COVER | |
21. | 8L-9660 | [1] | ROTOR ASSEM. | |
22. | 3K-6168 | [1] | SCREW | |
[1] | LOCKWASHER | |||
23. | 8L-9350 | [1] | SLIP RING ASSEM. | |
24. | 6D-5741 | [1] | BEARING | |
(Parts of 8L9660 Rotor Assem.) | ||||
25. | 8L-9659 | [1] | STATOR ASSEM. | |
26. | 8L-9363 | [1] | DIODE ASSEM. (Positive-3 Diodes) | |
27. | 8L-9380 | [4] | NUT | |
28. | 8L-9351 | [4] | INSULATOR | |
29. | 8L-9352 | [10] | WASHER | |
30. | 8L-9359 | [1] | BOLT | |
31. | 8L-9347 | [3] | INSULATOR | |
32. | 8L-9376 | [2] | SCREW | |
33. | 8L-9358 | [1] | CABLE ASSEM. | |
34. | 4B-2047 | [4] | NUT | |
35. | 7H-2079 | [4] | LOCKWASHER | |
36. | 8L-9375 | [2] | BOLT | |
8L-9377 | [2] | WASHER | ||
37. | 8L-9365 | [1] | DIODE ASSEM. (Negative-3 Diodes) | |
38. | 8L-9709 | [1] | CABLE ASSEM. | |
39. | 8L-9654 | [1] | SLEEVE | |
8L-5006 | ALTERNATOR ASSEM. | |||
CONSISTS OF ALL PARTS EXCEPT THOSE MARKED H |
#UE0700910234
HYDRAULIC STARTING SYSTEM
HYDRAULIC STARTING SYSTEM
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
8L-8647 Y | [1] | HARDWARE GROUP | ||
2L-3333 | [1] | HYDRAULIC GAUGE | ||
2L-3337 | [1] | FILTER HIGH PRESSURE | ||
2L-8342 | [1] | HYDRAULIC HAND PUMP | ||
2L-8343 | [1] | ACCUMULATOR | ||
3L-4968 | [1] | RESERVIOR ASSEMBLY | ||
3L-5052 | [2] | RESERVIOR MOUNTING STRAP | ||
6L-2666 | [1] | HYDRAULIC STARTING CONTROL VALVE | ||
[1] | DIAGRAM | |||
6L-8719 | [1] | RECHARGING PUMP ASSEMBLY | ||
8L-7695 | [1] | HYDRAULIC CRANKING MOTOR | ||
3L-4238 | [2] | ACCUMULATOR BRACKET ASSEMBLY | ||
4B-4277 | [2] | WASHER | ||
5B-5620 | [2] | BOLT | ||
2L-5683 | [2] | CLAMP ACCUMULATOR | ||
2L-5684 | [1] | SUPPORT ACCUMULATOR CLAMP | ||
4M-5280 | [2] | NUT | ||
3N-9503 | [1] | ACCUMULATOR ASSEMBLY PISTON TYPE | ||
1S-8411 | [1] | TAG | ||
3N-9502 | [1] | PLATE WARNING | ||
Y | SEPARATE ILLUSTRATION |
#UE0700910235
8L-8647: HARDWARE GROUP
8L8647 HARDWARE GROUP--Type 1
Part of Hydraulic Starting System
Part of Hydraulic Starting System
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
2B-0947 | [1] | BOLT SUPPORT TO TIMING PLATE | ||
2B-2695 | [4] | BOLT PUMP TO MOUNTING PLATE | ||
3B-4505 | [4] | LOCKWASHER 5/16" | ||
3B-4506 | [7] | LOCKWASHER 3/8" | ||
3B-4508 | [1] | LOCKWASHER 1/2" | ||
3B-4510 | [3] | LOCKWASHER 5/8" | ||
4B-4278 | [2] | WASHER ADJUSTING STRAP TO ENGINE SUPPORT | ||
4B-4280 | [1] | WASHER SUPPORT TO TIMING PLATE | ||
4B-5271 | [1] | WASHER PUMP MOUNTING PLATE TO ADJUSTING STRAP | ||
5B-3850 | [3] | WASHER SUPPORT TO TIMING PLATE | ||
5B-8978 | [2] | SERVICE TEE | ||
8B-2664 | [2] | BUSHING | ||
1D-4569 | [1] | BOLT BRACKET TO PLATE TO BRACKET | ||
1D-4717 | [1] | NUT ADJUSTING STRAP TO ENGINE SUPPORT | ||
1D-4717 | [3] | NUT SUPPORT TO TIMING PLATE | ||
1D-4719 | [1] | NUT SUPPORT TO TIMING PLATE | ||
2D-0058 | [7] | COUPLING | ||
2D-8910 | [1] | UNION | ||
2D-8910 | [1] | UNION TO PUMP INLET | ||
3D-8884 | [1] | ELBOW | ||
4D-3763 | [8] | COUPLING | ||
4D-4917 | [1] | TEE | ||
2F-7689 | [1] | SPACER BRACKET TO PLATE TO BRACKET | ||
2H-3788 | [1] | NUT BRACKET TO PLATE TO BRACKET | ||
2H-3940 | [2] | UNION | ||
4H-2243 | [12] | COUPLING | ||
9H-1832 | [1] | SPACER BRACKET TO PLATE TO BRACKET | ||
4L-7412 | [1] | ADAPTER TO PUMP OUTLET | ||
4L-7412 | [1] | ADAPTER TO PUMP RETURN | ||
5L-5502 | [2] | FITTING | ||
7L-0157 | [1] | HOSE | ||
[1] | HOSE | |||
7L-0545 | [1] | PULLEY TO PUMP ASSEMBLY | ||
8L-5379 | [1] | BRACKET MOUNTING PLATE TO SUPPORT | ||
8L-5380 | [1] | BRACKET MOUNTING PLATE TO SUPPORT | ||
8L-8638 | [1] | SUPPORT BRACKET TO TIMING PLATE | ||
8L-8644 | [1] | PLATE PUMP MOUNTING | ||
9L-0903 | [1] | STRAP BELT TENSION ADJUSTING | ||
5M-8137 | [1] | VEE BELT PUMP PULLEY TO CRANK PULLEY | ||
8M-9024 | [2] | WASHER BRACKET TO SUPPORT | ||
8M-9024 | [1] | WASHER BRACKET TO SUPPORT | ||
4S-5719 | [1] | SPACER ENGINE SUPPORT TO ADJUSTING STRAP | ||
0L-1143 | [1] | BOLT ENGINE SUPPORT TO ADJUSTING STRAP | ||
0S-1588 | [1] | BOLT BRACKET TO SUPPORT | ||
0S-1588 | [2] | BOLT BRACKET TO SUPPORT | ||
0S-1589 | [3] | BOLT FLYWHEEL HOUSING TO CRANKING MOTOR | ||
0S-1590 | [1] | BOLT ENGINE SUPPORT TO ADJUSTING STRAP | ||
0S-1594 | [1] | BOLT PUMP MOUNTING PLATE TO ADJUSTING STRAP | ||
0S-1619 | [2] | BOLT SUPPORT TO TIMING PLATE | ||
0T-0573 | [1] | BOLT SUPPORT TO TIMING PLATE |
#UE0700910236
8L-8647: HARDWARE GROUP
8L8647 HARDWARE GROUP--Type 2
Part of Hydraulic Starting System listed on Page 49A
Part of Hydraulic Starting System listed on Page 49A
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8L-5380 | [1] | BRACKET | |
2. | 8L-8638 | [1] | SUPPORT | |
3. | 2B-0947 | [1] | BOLT | |
1D-4719 | [1] | NUT | ||
3B-4508 | [1] | LOCKWASHER | ||
4B-4280 | [1] | WASHER | ||
4. | 5B-0213 | [3] | BOLT | |
5B-3850 | [3] | WASHER | ||
5. | 3B-4506 | [8] | LOCKWASHER | |
6. | 8L-5379 | [1] | BRACKET | |
7. | 2F-7689 | [1] | SPACER | |
8. | 1D-4569 | [1] | BOLT | |
9H-1832 | [1] | SPACER | ||
2H-3788 | [1] | NUT | ||
9. | 7L-0545 | [1] | PULLEY | |
10. | 2D-8910 | [1] | UNION | |
11. | 8L-8644 | [1] | PLATE | |
12. | 9L-0903 | [1] | STRAP | |
13. | 0S-1594 | [1] | BOLT | |
4B-5271 | [1] | WASHER | ||
14. | 2B-2695 | [4] | BOLT | |
3B-4505 | [4] | LOCKWASHER | ||
15. | 4L-7412 | [1] | ADAPTER | |
16. | 5M-8137 | [1] | VEE BELT | |
17. | 0S-1590 | [1] | BOLT (2" long) | |
0L-1143 | [1] | BOLT (2.50" long) | ||
1D-4717 | [1] | NUT | ||
18. | 4B-4278 | [2] | WASHER (Use as Required) | |
19. | 4S-5719 | [1] | SPACER (Use as Required) | |
3K-1470 | [1] | SPACER (Use as Required) | ||
20. | 2H-3940 | [1] | UNION | |
21. | 0S-1588 | [3] | BOLT | |
8M-9024 | [3] | WASHER | ||
22. | 0S-1589 | [3] | BOLT | |
3B-4510 | [3] | LOCKWASHER | ||
3B-7284 Y | [2] | NIPPLE | ||
5B-8978 | [2] | TEE | ||
8B-2664 | [2] | BUSHING | ||
7B-9684 | [1] | VALVE | ||
2D-0058 | [5] | COUPLING | ||
2D-8910 | [1] | UNION | ||
3D-8884 | [1] | ELBOW | ||
4D-3763 | [8] | COUPLING | ||
4D-4917 | [1] | TEE | ||
2H-3940 | [2] | UNION | ||
2H-9091 | [3] | UNION | ||
4H-2243 | [12] | COUPLING | ||
5L-5502 | [2] | FITTING | ||
7L-0157 | [1] | HOSE | ||
[1] | HOSE | |||
H | NOT SHOWN | |||
Y | SEPARATE ILLUSTRATION |
#UE0700910237
8L-4480: GLOW PLUG GROUP
8L4480 GLOW PLUG GROUP--24 Volt--Type 1
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2H-3755 | [3] | BOLT | |
4B-4277 | [3] | WASHER | ||
2. | 5S-8479 | [1] | LEAD ASSEM. | |
3. | 4S-7824 | [6] | GLOW PLUG | |
4. | 3B-4505 | [5] | LOCKWASHER | |
5. | 7L-6613 | [1] | WIRE ASSEM. | |
6. | 7L-6614 | [1] | SHELL | |
3M-6018 | [1] | TERMINAL | ||
2R-1033 | [1] | WASHER | ||
(Parts of 7L6613 Assem.) | ||||
7. | 9L-2796 | [2] | BOLT | |
1D-4716 | [2] | NUT | ||
8. | 8L-4127 | [1] | BRACKET ASSEM. | |
(Use without Electric Start) | ||||
9. | 0S-1613 | [2] | BOLT | |
(Part of 8L4127 Assem.) | ||||
10. | 1B-4330 | [2] | NUT | |
3B-4504 | [2] | LOCKWASHER | ||
11. | 9F-3099 | [1] | SWITCH (Magnetic) | |
(Use with Insulated System) | ||||
12. | 4F-2294 | [2] | NUT | |
3L-6789 | [2] | LOCKWASHER | ||
8F-0908 | [2] | WASHER | ||
13. | 4B-2043 | [2] | NUT | |
3B-4501 | [2] | LOCKWASHER | ||
(Parts of 9F3099 Switch) | ||||
14. | 2S-2342 | [1] | SWITCH ASSEM. (Heat-Start) | |
8F-3437 | [1] | LEVER | ||
5L-7200 | [1] | SCREW | ||
3B-4501 | [1] | LOCKWASHER | ||
(Parts of 2S2342 Assem.) |
#UE0700910238
8L-4480: GLOW PLUG GROUP
8L4480 GLOW PLUG GROUP--24 Volt--Type 2
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2H-3755 | [3] | BOLT | |
2. | 5S-8479 | [1] | LEAD ASSEM. | |
3. | 1P-7324 C | [6] | GLOW PLUG | |
4. | 9M-1974 C | [3] | WASHER | |
5. | 7L-6613 | [1] | WIRE ASSEM. | |
6. | 7L-6614 | [1] | SHELL | |
3M-6018 | [1] | TERMINAL | ||
2R-1033 | [1] | WASHER | ||
7. | 9L-2796 | [2] | BOLT | |
1D-4716 H | [2] | NUT | ||
9M-1974 C | [2] | WASHER | ||
8. | 8S-7713 C | [1] | SWITCH ASSEM. (Heat-Start) | |
8F-3437 | [1] | LEVER | ||
5L-7200 | [1] | SCREW | ||
3B-4501 | [1] | LOCKWASHER | ||
9. | 8L-4126 CH | [1] | BRACKET | |
C | INDICATES CHANGE | |||
H | USED WITHOUT ELECTRIC START |
#UE0700910239
8L-4480: GLOW PLUG GROUP
8L4480 GLOW PLUG GROUP--24 Volt--Type 3
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2H-3755 | [3] | BOLT | |
2. | 5S-8479 | [1] | LEAD ASSEM. | |
3. | 1P-7324 | [6] | GLOW PLUG | |
4. | 9M-1974 | [3] | WASHER | |
5. | 7L-6613 | [1] | WIRE ASSEM. | |
6. | 7L-6614 | [1] | SHELL | |
3M-6018 | [1] | TERMINAL | ||
2R-1033 | [1] | WASHER | ||
7. | 9L-2796 | [2] | BOLT | |
1D-4716 H | [2] | NUT | ||
9M-1974 | [2] | WASHER | ||
8. | 8S-7713 | [1] | SWITCH ASSEM. (Heat-Start) | |
8F-3437 | [1] | LEVER | ||
5L-7200 | [1] | SCREW | ||
3B-4501 | [1] | LOCKWASHER | ||
9. | 4N-8465 CH | [1] | BRACKET | |
C | INDICATES CHANGE | |||
H | USED WITHOUT ELECTRIC START |
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure to Restore the Residual Magnetic Field on Brushless Alternators{1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternators (6L6024 And 7L6414 24V, 9L184112V 52A)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternators (8L5003 24V, 8L5006 24V, 2N6397 24V, 2N6398 24V, 2N6396 12V, 2N6395 12V, 8L5412 12V And 8L5410 12V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators (6L5397 And 6L3432 32V, 2N954 And 6L3412 12V, 6L5657 24V, 6L3434 24V, 6L5658 30V, 6L3430 30V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators (8L5004 24V, 2N5882 24V, 2N5882 24V, 2N7279 24V, 2N7278 12V, 8L5413 12V And 2N5881 12V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Systems Operation
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
HDB Series and M1 Series Heavy Duty Brushless Alternators
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Correction to Service Magazine, SEPD0544, "Repair Parts Available for Alternator R-Terminal" {1405}
2000/12/18
2000/12/18
Correction to Service Magazine, SEPD0544, "Harness Repair of Alternator R-Terminal Connector" {1405}
2000/12/25
2000/12/25
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Caterpillar Parts SIS Catalog 3306 :
Truck sale:
9,775
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
35,500
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.
8,185
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
41,500
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
35,000
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC