AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FINAL DRIVE (3S8701 N/S)--Lower Half Serial No. 92J175 to 92J337 inclusive Refer also to Page 119B for special parts 561C


POWER TRAIN
DRIVE GP-FINAL
UNDERCARRIAGE
IDLER GP

PIPELAYER 561C PIPELAYER 92J
 561C PIPELAYER 92J00001-00390 (MACHINE) UE070093 561C 92J   (1967)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE
FINAL DRIVE
FINAL DRIVE
FINAL DRIVE
3S-8701 FINAL DRIVE
3S-8701 FINAL DRIVE
FINAL DRIVE
3S-8701 FINAL DRIVE
FINAL DRIVE
3S-8701 FINAL DRIVE
FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
 

#UE0700930190
 

3S-8701: FINAL DRIVE

FINAL DRIVE (3S8701 N/S)--Lower Half
Serial No. 92J175 to 92J337 inclusive
Refer also to Page 119B for special parts
c145145 UE070093
3S8701 FINAL DRIVE Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-2029 [16] BOLT  
  3B-4506 [16] LOCKWASHER  
  7B-7274 [2] GASKET  
  2F-7576 [2] SHAFT  
  5M-2131 [2] NUT  
  2B-8093 [2] PIN  
  2B-8092 [2] RING  
  2B-8162 [4] DOWEL  
  5B-7267 [4] CORK  
  7B-0358 [2] CONE  
  7B-0357 [2] CUP  
  7M-0481 R [4] SEAL GROUP  
  7M-0475 [2] RING  
    (Part of 7M481 Group)
  6B-4598 [28] BOLT  
  6B-6682 [28] NUT  
  1H-2433 [6] LOCK (6.75" LONG)  
  5M-5241 [8] LOCK (4" LONG)  
  5M-5242 [2] GEAR (49 TEETH)  
  0S-1585 [40] BOLT  
  2M-0849 [40] WASHER  
  8H-2247 [2] GASKET  
  3S-8632 [2] CASE  
  3S-9182 [4] PLUG  
  5S-0727 [2] SPROCKET GROUP  
  3S-8182 [27] BOLT  
  7H-3607 [27] NUT  
  5S-0724 C [9] SEGMENT (std.)  
    (Parts of 5S727 Assem.)
    -OR-
  3P-5711 CH [9] SEGMENT (snow & mud)  
  1A-4073 [2] GUARD  
  0S-0509 [10] BOLT  
  3S-8633 [2] EXTENSION  
  4F-6070 [2] GUARD  
  4B-4340 [9] RIVET  
    (Parts of 5S726 Assem.)
  5S-0726 [1] HUB ASSEM.  
    (Part of 5S727 Assem.)
  3S-8636 [2] NUT  
  4H-9040 [2] NUT  
  3F-1960 [2] LOCK  
  2P-1624 [2] GASKET  
  3F-1958 [2] GUARD  
  0S-0509 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7S-7625 [2] SUPPORT ASSEM.  
  2B-7408 [2] PLUG (PIPE)  
  9M-5894 [2] SEAL  
  3B-8491 [2] FITTING  
  1F-1006 [1] DOWEL  
    (Part of 2S1477 Assem.)
  2B-7557 [2] CORK  
  3S-8635 [2] HUB  
  3F-1972 [2] RETAINER ASSEM.  
  8B-6343 [2] CUP  
  3F-1396 [2] CONE  
  1B-8742 [2] KEY  
  3H-2617 [2] PIN (Roll)  
    (Part of 3F1972 Assem.)
  2F-2815 [2] LOCK  
  2S-4366 [8] SHIM  
  1A-3585 [2] NUT  
  3F-1956 [2] CAP  
  9F-2247 [2] PLUG  
  8B-1312 [2] PIN  
    (Part of 2S1477 Assem.)
  2M-0122 [4] DOWEL  
  3F-1965 [1] BUSHING  
    (Part of 7S7625 Assem.)
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3F-1955 [2] GASKET  
  4B-1281 [16] MACH. SCREW  
  3F-1954 [2] RETAINER  
  8M-0476 [2] CAGE  
  2S-1477 [2] HOLDER ASSEM.  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  7S-7330 [2] LOCK  
  1F-4583 [2] SEAL  
  H   NOT PART OF FINAL DRIVE
  R   REMFG PART MAY BE AVAILABLE
  C   INDICATES CHANGE
 

#UE0700930191
 

3S-8701: FINAL DRIVE GROUP

3S8701 FINAL DRIVE GROUP--Upper Half Part 1 of 2
Serial No. 92J338-Up
c158300 UE070093
3S8701 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1566 [16] BOLT  
  3B-4510 [16] LOCKWASHER  
  7B-5088 [2] DRUM  
  1H-9456 [4] BOLT  
  3B-4510 [2] LOCKWASHER  
  1A-9504 [2] GASKET  
  1A-9505 [2] STOP  
  1B-5932 [1] DOWEL  
    (PART OF FLANGE ASSEM. 2M6968)
  9B-3175 [2] BOLT  
  6B-9260 [2] LOCK  
  2F-2625 [2] WASHER  
  6P-8359 C [2] GASKET  
  9S-1343 [2] PLUG  
    (PART OF FLANGE ASSEM. 2M6968)
  5P-4251 C [2] SEAL  
  9S-3321 [2] CAGE  
  2M-6968 [2] FLANGE ASSEM  
  0S-1595 [10] BOLT  
  3H-7654 [10] WASHER  
  1D-2598 [2] PIN  
  4S-8005 [2] PINION (10 TEETH)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  6B-5163 [2] ROLLER ASSEM  
  2P-2810 [2] RACE  
  6B-5163 [2] ROLLER ASSEM  
  1M-0343 [2] RACE  
    USE 7M7260 GASKET SOLUTION
  C   INDICATES CHANGE
 

#UE0700930192
 

3S-8701: FINAL DRIVE GROUP

3S8701 FINAL DRIVE GROUP--Lower Half Part 2 of 2
Serial No. 92J338-Up. Refer also to Page 119B for special parts
c158301 UE070093
3S8701 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1571 [32] BOLT  
  8F-6809 [32] LOCKWASHER  
    USE 7M7260 GASKET SOLUTION
  2F-7576 [2] SHAFT  
  5M-2131 [2] NUT  
  2B-8093 [2] PIN  
  2B-8092 [2] RING  
  2B-8162 [4] DOWEL  
  5B-7267 [4] CORK  
  7B-0358 [2] CONE  
  7B-0357 [2] CUP  
  7M-0481 RC [4] SEAL GROUP  
  7M-0475 [2] RING  
    (Part of 7M781 Assem.)
  6B-4598 [28] BOLT  
  6B-6682 [28] NUT  
  1H-2433 [6] LOCK (6 75" LONG)  
  5M-5241 [8] LOCK (4" LONG)  
  5M-5242 [2] GEAR (49 TEETH)  
  0S-1585 [40] BOLT  
  2M-0849 [40] WASHER  
    USE 7M7260 GASKET SOLUTION
  2P-1511 [2] CASE  
  3S-9182 [4] PLUG  
  5S-0727 [2] SPROCKET GROUP  
  3S-8182 [27] BOLT  
  7H-3607 [27] NUT  
  5S-0724 [9] SEGMENT (std.)  
    (Parts of 5S727 Assem.)
    -OR-
  3P-5711 H [9] SEGMENT (snow & mud)  
  2P-1553 [2] BEARING  
  3P-5755 C [2] EXTENSION  
  4F-6070 [2] GUARD  
  4B-4340 [9] RIVET  
    (Parts of 5S726 Assem.)
  5S-0726 [1] HUB ASSEM.  
    (Part of 5S727 Assem.)
  3S-8636 [2] NUT  
  4H-9040 [2] NUT  
  3F-1960 [2] LOCK  
  3P-3954 C [2] GASKET  
  3F-1958 [2] GUARD  
  0S-0509 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7S-7625 [2] SUPPORT ASSEM.  
  2B-7408 [2] PLUG (PIPE)  
  9M-5894 [2] SEAL  
  3B-8491 [2] FITTING  
  1F-1006 [1] DOWEL  
    (Part of 2S1477 Assem.)
  2B-7557 [2] CORK  
  3P-5754 RC [2] HUB  
  3F-1972 [2] RETAINER ASSEM.  
  8B-6343 [2] CUP  
  3F-1396 [2] CONE  
  1B-8742 [2] KEY  
  3H-2617 [4] PIN (Roll)  
    (Part of 3F1972 Assem.)
  2F-2815 [2] LOCK  
  2S-4366 [8] SHIM  
  1A-3585 [2] NUT  
  3F-1956 [2] CAP  
  9F-2247 [2] PLUG  
  8B-1312 [2] PIN  
    (Part of 2S1477 Assem.)
  2M-0122 [4] DOWEL  
  3F-1965 [1] BUSHING  
    (Part of 7S7625 Assem.)
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3F-1955 [2] GASKET  
  4B-1281 [16] SCREW  
  3F-1954 [2] RETAINER  
  8M-0476 [2] CAGE  
  2S-1477 [2] HOLDER ASSEM.  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 C [2] LOCK  
  1F-4583 [2] SEAL  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF FINAL DRIVE
 

#UE0700930193
 

2M-3035: FRONT IDLER

FRONT IDLER (2M3035 N/S)--Part 1 of 2
Serial No. 92J1 to 92J156 inclusive
c123897 UE070093
2M3035 FRONT IDLER Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-5926 [2] VALVE  
  2S-5925 [2] VALVE  
  5M-6708 [4] WASHER  
  1S-5252 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
  7H-2445 [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  3S-0311 [2] ROD GROUP  
  8S-2560 [2] IDLER ASSEM.  
  0V-0459 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1F-9489 [8] WASHER  
  2H-6844 [8] LOCK  
  2S-5927 [2] PLATE  
    (CAUTION)
  7B-3028 [8] SCREW  
    (1/2 EACH IN 3S311 ROD GROUP)
  0L-1329 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-1382 [8] PLATE  
  7F-2022 [4] PIN  
  1B-4205 [4] NUT  
  3B-4508 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  3S-2445 [2] ARM  
    (R.H. OUTER - L.H. INNER)
  3S-2446 [2] ARM  
    (R.H. INNER - L.H. OUTER)
 

#UE0700930194
 

2M-3035: FRONT IDLER

FRONT IDLER (2M3035 N/S)--Sectional View--Part 2 of 2
Serial No. 92J1 to 92J156 inclusive
c123896 UE070093
2M3035 FRONT IDLER Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-2424 [2] SLEEVE  
  7H-2438 [2] BOLT  
  1B-4210 [2] NUT  
  2S-1654 [2] WASHER  
  0S-1620 [2] BOLT  
  3S-2447 [4] BEARING  
  1M-3094 [4] BUSHING ASSEM.  
  9B-2289 [8] PIN  
    (2 IN EACH BUSHING ASSEM. 1M3094)
  2S-1731 [2] PLUG  
  2M-2858 R [4] SEAL GROUP  
  5M-1913 [2] SHAFT  
  7F-8267 [4] RING  
  1M-3097 [8] SEAL (RUBBER)  
    (2 IN EACH SEAL GROUP 2M2858)
  1A-2029 [24] BOLT  
  7B-9457 [12] LOCK  
  4M-8292 [4] BUSHING  
    (1 IN EACH BUSHING ASSEM. 1M3094)
  5F-3092 [2] SEAL  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  4M-7021 [2] SEAL  
  4M-7022 [2] RING  
  2S-5867 [2] SEAL  
  7H-2423 [4] RING  
  8M-6676 [2] CYLINDER  
  1S-6422 [2] PILOT ASSEM.  
  0S-1585 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  0S-1573 [16] BOLT  
  1D-4719 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  2M-3508 [24] SHIM  
  7M-9398 [4] PLATE  
  1F-8875 [4] PLATE ASSEM.  
  6B-6022 [8] PIN  
    (2 IN EACH PLATE ASSEM. 1F8875)
  1H-6227 [4] RING  
  7M-5050 [4] COLLAR  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0700930195
 

2M-3035: FRONT IDLER

FRONT IDLER (2M3035 N/S)--Part 1 of 2
Serial No. 92J157 to 92J336 inclusive
c123897 UE070093
2M3035 FRONT IDLER Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-5926 [2] VALVE  
  2S-5925 [2] VALVE  
  5M-6708 [4] WASHER  
  1S-5252 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
  7H-2445 [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  3S-0311 [2] ROD GROUP  
  8S-2560 [2] IDLER ASSEM.  
  0V-0459 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1F-9489 [8] WASHER  
  2H-6844 [8] LOCK  
  2S-5927 [2] PLATE  
    (CAUTION)
  7B-3028 [8] SCREW  
    (1/2 EACH IN 3S311 ROD GROUP)
  0L-1329 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-1382 [8] PLATE  
  7F-2022 [4] PIN  
  1B-4205 [4] NUT  
  3B-4508 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  3S-2445 [2] ARM  
    (R.H. OUTER - L.H. INNER)
  3S-2446 [2] ARM  
    (R.H. INNER - L.H. OUTER)
 

#UE0700930196
 

2M-3035: FRONT IDLER

FRONT IDLER (2M3035 N/S)--Sectional View--Part 2 of 2
Serial No. 92J157 to 92J336 inclusive
c126602 UE070093
2M3035 FRONT IDLER Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-2424 [2] SLEEVE  
  7H-2438 [2] BOLT  
  1B-4210 [2] NUT  
  2S-1654 [2] WASHER  
  0S-1620 [2] BOLT  
  3S-2447 [4] BEARING  
  8S-5801 C [4] BUSHING ASSEM.  
  9B-2289 [8] PIN  
    (2 IN EACH BUSHING ASSEM. 8S5801)
  2S-1731 [2] PLUG  
  2M-2858 R [4] SEAL GROUP  
  5M-1913 [2] SHAFT  
  7F-8267 [4] RING  
  1M-3097 [8] SEAL (RUBBER)  
    (2 IN EACH SEAL GROUP 2M2858)
  1A-2029 [24] BOLT  
  7B-9457 [12] LOCK  
  8S-5796 C [4] BEARING  
    (1 IN EACH BUSHING ASSEM. 8S5801)
  5F-3092 [2] SEAL  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  4M-7021 [2] SEAL  
  4M-7022 [2] RING  
  2S-5867 [2] SEAL  
  7H-2423 [4] RING  
  8M-6676 [2] CYLINDER  
  1S-6422 [2] PILOT ASSEM.  
  0S-1585 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  0S-1573 [16] BOLT  
  1D-4719 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  2M-3508 [24] SHIM  
  7M-9398 [4] PLATE  
  1F-8875 [4] PLATE ASSEM.  
  6B-6022 [8] PIN  
    (2 IN EACH PLATE ASSEM. 1F8875)
  1H-6227 [4] RING  
  7M-5050 [4] COLLAR  
  C   INDICATES CHANGE FROM PREVIOUS
  R   REMFG PART MAY BE AVAILABLE
 

#UE0700930197
 

2M-3025: FRONT IDLER GROUP

2M3025 FRONT IDLER GROUP--Part 1 of 2
Serial No. 92J337 to 92J387 inclusive
c131402 UE070093
2M3025 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-5926 [2] VALVE  
  2S-5925 [2] VALVE  
  5M-6708 [4] WASHER  
  1S-5252 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
  7H-2445 [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  3S-0311 [2] ROD GROUP  
  8S-2560 [2] IDLER ASSEM.  
  0V-0459 [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  1F-9489 [8] WASHER  
  2H-6844 [8] LOCK  
  2S-5927 [2] PLATE  
    (CAUTION)
  7B-3028 [8] SCREW  
    (1/2 EACH IN 3S311 ROD GROUP)
  0L-1329 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-1382 [8] PLATE  
  5M-5000 [4] PIN  
  4F-5192 [4] NUT  
  3B-4507 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  3S-2445 [2] ARM  
    (R.H. OUTER - L.H. INNER)
  3S-2446 [2] ARM  
    (R.H. INNER - L.H. OUTER)
 

#UE0700930198
 

2M-3025: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Sectional View--Part 2 of 2
Serial No. 92J337 to 92J387 inclusive
c130959 UE070093
2M3025 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-2424 [2] SLEEVE  
  7H-2438 [2] BOLT  
  1B-4210 [2] NUT  
  2S-1654 [2] WASHER  
  0S-1620 [2] BOLT  
  1P-1554 [4] BEARING  
  8S-5801 [4] BUSHING ASSEM.  
  9B-2289 [8] PIN  
    (2 IN EACH BUSHING ASSEM. 8S5801)
  2S-1731 [2] PLUG  
  2M-2858 R [4] SEAL GROUP  
  1P-1555 [2] SHAFT  
  7F-8267 [4] RING  
  1M-3097 [8] SEAL (RUBBER)  
    (2 IN EACH SEAL GROUP 2M2858)
  1A-2029 [24] BOLT  
  7B-9457 [12] LOCK  
  8S-5796 [4] BEARING  
    (1 IN EACH BUSHING ASSEM. 8S5801)
  7H-2444 [2] SEAL  
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-7670 [2] PISTON  
  9H-7668 [2] RING  
  4M-7021 [2] SEAL  
  4M-7022 [2] RING  
  2S-5867 [2] SEAL  
  7H-2423 [4] RING  
  8M-6676 [2] CYLINDER  
  1S-6422 [2] PILOT ASSEM.  
  0S-1585 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  0S-1573 [16] BOLT  
  1D-4719 [16] NUT  
  3B-4508 [16] LOCKWASHER  
  2M-3508 [24] SHIM  
  7M-9398 [4] PLATE  
  1F-8875 [4] PLATE ASSEM.  
  6B-6022 [8] PIN  
    (2 IN EACH PLATE ASSEM. 1F8875)
  1H-6227 [4] RING  
  7M-5050 [4] COLLAR  
  R   REMFG PART MAY BE AVAILABLE
 

#UE0700930199
 

2M-3035: FRONT IDLER GROUP

2M3035 FRONT IDLER GROUP--Part 1 of 2
Serial No. 92J388-Up
c209114 UE070093
2M3035 FRONT IDLER GROUP Parts scheme
  For full view, you need register

Parts for your 561C PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2S-5926 [2] VALVE  
  2S-5925 [2] VALVE  
  5M-6708 [4] WASHER  
  1S-5252 [2] PLATE (WARNING)  
  7B-3028 [8] SCREW  
  3P-1465 C [2] SPRING  
  9H-4104 [2] PILOT  
  7H-4755 [2] STOP  
    (R.H. OUTER - L.H. INNER)
  7H-4756 [2] STOP  
    (R.H. INNER - L.H. OUTER)
  1A-1135 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
  9H-4105 [8] DOWEL  
  3S-0311 [2] ROD GROUP  
  8S-2560 [2] IDLER ASSEM.  
  0S-2353 C [8] BOLT  
  1B-4206 [8] NUT  
  3B-4510 [8] LOCKWASHER  
  2S-5927 [2] PLATE  
    (CAUTION)
  7B-3028 [8] SCREW  
    (1/2 EACH IN 3S311 ROD GROUP)
  0L-1329 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  4B-1382 [8] PLATE  
  5M-5000 [4] PIN  
  4F-5192 [4] NUT  
  3B-4507 [4] LOCKWASHER  
  4F-5004 [8] SPRING ASSEM.  
  3S-2445 [2] ARM  
    (R.H. OUTER - L.H. INNER)
  3S-2446 [2] ARM  
    (R.H. INNER - L.H. OUTER)
  C   INDICATES CHANGE
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Final Drive
561C POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Instructions For Modification Of The 5P8630 Driver Head Which Is Part Of The 6V82 Final Drive Bearing Adjustment Tool Arrangement{0654,4050}
1980/10/20
Increased Force Used For Installation Of Steering Clutch Flange On Final Drive Input Pinion To Prevent Oil Leakage{4057,4091,4052}
1981/02/23
New Seal Groups Used At Final Drive Sprockets{4052}
1977/03/21
Higher Capacity Bearing Used On Final Drive Pinion{4091}
1978/10/30
Torque Turn Adjustment Of Final Drive Hub Bearings{0654,4050}
1979/05/07
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog 561C :

FINAL DRIVE
3S-8701 FINAL DRIVE
3S-8701 FINAL DRIVE
FINAL DRIVE
3S-8701 FINAL DRIVE
FINAL DRIVE
FINAL DRIVE
FINAL DRIVE
3S-8202 BRAKES
BRAKES
3S-8202 BRAKES
3S-8202 BRAKES
FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
FRONT IDLER
2M-3035 FRONT IDLER
2M-3035 FRONT IDLER
FRONT IDLER
2M-3035 FRONT IDLER
2M-3035 FRONT IDLER
FRONT IDLER GROUP
2M-3025 FRONT IDLER GROUP
2M-3025 FRONT IDLER GROUP

Truck sale:

1969 CAT 561C
USD $18,306 
1969 CAT 561C

Conquest Equipment
Oxbow, Saskatchewan, Canada
1977 CAT 561C
USD $24,150 
1977 CAT 561C

Gulf Coast Equipment
1968 CAT 561C
USD $9,990 
1968 CAT 561C

Gulf Coast Equipment
1968 CAT 561C
USD $34,990 
1968 CAT 561C

Gulf Coast Equipment
1977 CAT 561C
USD $12,800 
1977 CAT 561C

Tilly's Crawler Parts
Toowoomba, QLD, Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.