AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (7S6700 N/S)--Side View--Part 1 of 3 Serial No. 99J1630-Up See Page 22 for Gasket Kit D6C


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

TRACK-TYPE TRACTOR D6C TRACK-TYPE TRACTOR 99J
 D6C TRACTOR / DIRECT DRIVE / 99J00001-01753 (MACHINE) UE070094 D6C 99J   (1967)

BASIC ENGINE

CYLINDER BLOCK GP
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
 

#UE0700940070
 

7S-6700: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S6700 N/S)--Side View--Part 1 of 3
Serial No. 99J1630-Up
See Page 22 for Gasket Kit
c115885 UE070094
7S6700 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9307 [ 1] PLUG  
  6F-7062 [ 1] GASKET  
2. 9S-5417 [ 1] PAN  
3. 8S-1965 [ 1] GASKET  
4. 0S-1591 [ 13] BOLT (1.50" long)  
  0L-1352 [ 3] BOLT (3.25" long)  
5. 3B-4506 [ 31] LOCKWASHER  
6. 0L-1351 [ 8] BOLT  
7. 9S-1799 [ 1] COVER  
  8S-0877 [ 1] GASKET  
8. 4B-3938 [ 1] PLUG  
9. 2A-3798 [ 2] DOWELL  
10. 9H-5921 [ 1] GASKET  
11. 2P-8695 C [ 1] HOUSING ASSEM.  
12. 3D-0490 [ 10] STUD (2" long)  
13. 5M-1932 [ 2] STUD (2.20" long)  
14. 2A-3798 [ 2] DOWEL  
15. 9M-8395 [ 1] BEARING  
16. 3D-0472 [ 2] STUD  
17. 3F-0957 [ 2] DOWEL  
18. 9F-2247 [ 3] PLUG  
19. 2B-8162 [ 2] DOWEL  
20. 5M-7135 [ 4] SHIM (.032" Thick)  
  5M-7136 [ 2] SHIM (.065" Thick)  
  5M-7159 [ 2] SHIM (.014" Thick)  
21. 1D-4586 [ 4] BOLT  
  9H-1024 [ 4] WASHER  
22. 5M-6213 [ 2] PLUG  
23. 2A-4639 [ 7] BOLT  
24. 9S-1759 [ 1] TUBE  
25. 3B-8998 [ 2] FITTING  
  1F-1344 [ 1] NUT  
26. 4B-4278 [ 23] WASHER  
    INDICATES CHANGE
 

#UE0700940071
 

7S-6700: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S6700 N/S)--Side View--Part 2 of 3
Serial No. 99J1630-Up. 2P8776 Block parts are shown on Page 19A
Note: 9S8914 Piston and Liner Group, consisting of: 1--Piston Assembly,
1--Liner and 2--Seal, is available
c115886 UE070094
7S6700 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-3023 C [ 6] ORIFICE  
2. 0S-1594 C [8] BOLT  
3. 3B-4506 [ 31] LOCKWASHER  
4. 5M-6214 C [ 1] PLUG  
5. 4B-4278 [ 5] WASHER  
6. 2P-8776 C Y [ 1] BLOCK ASSEM.  
7. 5S-6670 C [ 18] SEAL  
8. 2P-8889 C [ 6] LINER  
9. 9S-2273 [ 1] PLATE ASSEM.  
  5S-7190 [ 1] STUD  
10. 5S-7134 [ 1] GASKET  
11. 0T-0573 [ 5] BOLT  
12. 5B-8030 [ 1] SPACER  
13. 5M-6213 [ 4] PLUG  
14. 3B-2968 [ 2] BOLT  
  2J-3506 [ 2] NUT  
  2S-0115 [ 2] WASHER  
15. 5S-7135 [ 1] GASKET  
16. 9H-6067 [ 1] SEAL  
17. 8S-0501 [ 1] TUBE ASSEM.  
18. 8S-1961 [ 1] PLATE ASSEM.  
19. 0L-1351 [ 18] BOLT  
20. 4M-2969 [ 1] GASKET  
21. 0T-0102 [ 1] BOLT  
  0L-0364 [ 1] LOCK  
    SEPARATE ILLUSTRATION
    INDICATES CHANGE
 

#UE0700940072
 

7S-6700: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S6700 N/S)--End View--Part 3 of 3
Serial No. 99J1630-Up
Refer also to Page 105 for special parts
c136330 UE070094
7S6700 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [ 1] SUPPORT ASSEM.  
2. 7S-1234 [ 1] BUSHING ASSEM.  
3. 0L-1143 [ 9] BOLT  
4. 3B-4506 [ 20] LOCKWASHER  
5. 0S-1594 [ 8] BOLT  
6. 9S-3187 [ 1] LOCK  
7. 9H-4891 [ 1] GASKET  
8. 1B-4203 [ 6] NUT  
9. 2N-2753 [ 1] COVER  
10. 1C-2251 [ 2] BOLT  
11. 9S-8991 [ 1] COVER ASSEM.  
12. 0T-0101 [ 4] STUD  
13. 8S-6814 [ 2] DOWEL  
14. 3B-2460 [ 1] STUD  
15. 5S-8055 [ 1] GASKET  
16. 7H-7954 [ 1] BOLT  
17. 9S-1434 [ 1] PIPE  
  7S-1801 [ 1] ANCHOR  
18. 7S-1803 [ 1] CAP ASSEM.  
19. 8S-3995 [ 1] GAUGE ASSEM.  
20. 9S-1796 [ 1] TUBE ASSEM.  
21. 1A-2029 [ 2] BOLT  
22. 9S-3188 [ 1] LOCK  
23. 4M-4419 [ 1] LOCK  
24. 0S-1595 [ 4] BOLT  
  3B-4508 [ 4] LOCKWASHER  
25. 8S-1326 [ 1] FITTING  
  8F-8998 [ 1] NUT  
26. 2B-0947 [ 6] BOLT  
27. 5M-9131 [ 1] LOCK  
28. 5M-9134 [ 1] LOCK  
29. 5M-9135 [ 1] LOCK  
30. 1A-1460 [ 4] BOLT  
31. 0S-1585 [ 3] BOLT  
32. 9M-0300 [ 1] LOCK  
33. 7M-7205 [ 1] LOCK  
34. 5M-9136 [ 1] LOCK  
35. 4B-7739 [ 1] PLUG  
 

#UE0700940073
 

CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY
Serial No. 99J1 to 99J543 inclusive
Part of Cylinder Block and Covers shown on Pages 18A, 18D, 18G and 18K
Note: For Field Replacement order 5S6778 Block plus 1--9S5603 Hardware Kit
c102826 UE070094
None CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-1312 [2] DOWEL  
2. 3S-8313 [2] PLUG  
3. 7M-4046 [4] BEARING  
4. 4B-5387 [2] PLUG  
5. 5B-7652 [2] DOWEL  
6. 5S-8462 [1] STUD  
7. 8B-6349 [2] DOWEL  
8. 4B-9782 [1] BALL  
9. 9M-5477 [1] BEARING  
10. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER  
11. 8S-4676 [7] BEARING CAP GROUP  
  8S-4674 [2] SHIM (Long)  
  8S-4673 [6] SHIM (Short)  
    (Parts of 8S4676 Bearing Cap Group)
12. 8S-0835 [1] DOWEL  
13. 1H-0974 [1] DOWEL  
14. 5M-6213 [1] PLUG  
 

#UE0700940074
 

2P-8776: CYLINDER BLOCK AS

2P8776 CYLINDER BLOCK ASSEMBLY
Serial No. 99J1630-Up
Part of Cylinder Block and Covers shown on Page 18W
For Field Replacement order 2P8776 Block plus 1--2P8782 Hardware Kit
c114554 UE070094
2P8776 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [4] BEARING  
2. 5M-6213 [1] PLUG  
3. 8B-1312 [2] DOWEL  
4. 4B-5387 [2] PLUG  
5. 1H-0974 [1] DOWEL  
6. 5B-7652 [2] DOWEL  
7. 8S-0835 [1] DOWEL  
8. 3S-8313 [2] PLUG  
9. 8B-6349 [2] DOWEL  
10. 5S-8462 [1] STUD  
11. 9M-5477 [1] BEARING  
12. 4B-9782 [1] BALL  
13. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER  
14. 1P-2717 [7] BEARING CAP  
 

#UE0700940075
 

5S-6778: CYLINDER BLOCK ASSEMBLY

5S6778 CYLINDER BLOCK ASSEMBLY
Serial No. 99J544 to 99J1629 inclusive. Part of Cylinder Block and Covers shown on Pages 18N,
18P-2, 18Q and 18T. Note: For Field Replacement order 5S6778 Block plus 1--9S5603 Hardware Kit
c112398 UE070094
5S6778 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [ 4] BEARING  
2. 5M-6213 [ 1] PLUG  
3. 8B-1312 [ 2] DOWEL  
4. 4B-5387 [ 2] PLUG  
5. 1H-0974 [ 1] DOWEL  
6. 5B-7652 [ 2] DOWEL  
7. 8S-0835 [ 1] DOWEL  
8. 3S-8313 [ 2] PLUG  
9. 8B-6349 [ 2] DOWEL  
10. 5S-8462 [ 1] STUD  
11. 9M-5477 [ 1] BEARING  
12. 4B-9782 [ 1] BALL  
13. 7S-3224 [ 14] BOLT  
  2S-5658 [ 14] WASHER  
14. 8S-4676 [ 7] BEARING CAP GROUP  
  8S-4674 [ 2] SHIM (long)  
  8S-4673 [ 6] SHIM (short)  
    -OR-
  1P-2717 [ 7] BEARING CAP  
 

#UE0700940076
 

7S-3240: CRANKSHAFT

CRANKSHAFT (7S3240 N/S)
Serial No. 99J1 to 99J1550 inclusive
c113661 UE070094
7S3240 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] PLATE  
2. [1] CRANKSHAFT ASSEM.  
3. [6] PLUG  
4. [1] KEY  
5. [1] GEAR (40 Teeth)  
6. [7] BEARING  
7. [1] SEAL  
8. [6] BOLT  
9. [6] LOCKWASHER  
10. [1] DAMPER ASSEM.  
11. [1] PULLEY  
12. [1] BOLT  
13. [1] WASHER  
14. [1] SEAL  
15. [1] GEAR (58 Teeth)  
 

#UE0700940077
 

2P-1498: CRANKSHAFT

CRANKSHAFT (2P1498 N/S)
Serial No. 99J1551-Up
c115884 UE070094
2P1498 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0716 [ 2] PLATE  
2. 5S-5871 [ 1] CRANKSHAFT ASSEM.  
3. 9F-2247 [ 6] PLUG  
4. 5H-2671 [ 1] KEY  
5. 4M-9933 [ 1] GEAR (40 Teeth)  
6. 3S-9730 [ 7] BEARING  
7. 5S-9021 [ 1] SEAL  
8. 0S-1595 [ 6] BOLT  
9. 3B-4508 [ 6] LOCKWASHER  
10. 2P-9584 C [ 1] DAMPER ASSEM.  
11. 5S-8168 [ 1] PULLEY  
12. 6B-5310 [ 1] BOLT  
13. 5S-9948 [ 1] WASHER  
14. 7S-3103 [ 1] SEAL  
15. 9M-1687 [ 1] GEAR (58 Teeth)  
    INDICATES CHANGE
 

#UE0700940078
 

8S-3982: CRANKSHAFT BEARING REPLACEMENT GROUPS

8S3982 CRANKSHAFT BEARING REPLACEMENT GROUPS
FOR USE WITH STANDARD CRANKSHAFT
UE0700940078 UE070094
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    Complete set of Bearing Assemblies as shown with Standard Crankshaft
 

#UE0700940079
 

8S-3983: CRANKSHAFT BEARING REPLACEMENT GROUPS

8S3983 CRANKSHAFT BEARING REPLACEMENT GROUPS
FOR USE WITH .010 UNDERSIZE CRANKSHAFT
UE0700940079 UE070094
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4S-8881 [7] BEARING  
  1P-7960 [2] PLATE  
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
3306 VEHICULAR ENGINE
Cylinder Liner
3306 VEHICULAR ENGINE
Cylinder Liner Projection
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Crankshaft Main Bearings
D6C TRACTOR ENGINE
Cylinder Liners
D6C TRACTOR ENGINE
Camshaft Bearings
D6C TRACTOR ENGINE
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog D6C :

7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
7S-6700 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
CYLINDER BLOCK ASSEMBLY
5S-6778 CYLINDER BLOCK ASSEMBLY
CRANKSHAFT
7S-3240 CRANKSHAFT
CRANKSHAFT
2P-1498 CRANKSHAFT
8S-3982 CRANKSHAFT BEARING REPLACEMENT GROUPS

Truck sale:

Caterpillar D6C
 
Caterpillar D6C
- Crawler dozers
QUINN COMPANY
 
22.000 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


 
25.522 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D6C, Crawler dozers, Construction
19,500 
Caterpillar D6C, Crawler dozers, Construction
- Crawler dozers
PETERSON CAT
Caterpillar D6C, Construction
13,900 USD 
Caterpillar D6C, Construction
- Crawler dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.