AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4D9880 BLADE GROUP--14 Foot Effective with Serial No. 49G563 Refer also to Pages 253, 254 and 255 for special parts 16


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
DRIVE GP
IMPLEMENTS
CIRCLE GP

MOTOR GRADER 16 MOTOR GRADER 49G
 NO. 16 MOTOR GRADER 49G00305-00682 (MACHINE) UE070100 16 49G   (1963)

WORK TOOLS

BLADE GP
BLADE BRACKET AND GUARD
BLADE BRACKET AND GUARD
BLADE GROUP
4D-9880 BLADE GROUP
BLADE GROUP
4D-9880 BLADE GROUP
BLADE LIFT
BLADE LIFT
BLADE LIFT
BLADE LIFT
BLADE LIFT AND CENTERSHIFT GROUP
6D-6090 BLADE LIFT AND CENTERSHIFT GROUP
 

#UE0701000300
 

4D-9880: BLADE GROUP

4D9880 BLADE GROUP--14 Foot
Effective with Serial No. 49G563
Refer also to Pages 253, 254 and 255 for special parts
c110831 UE070100
4D9880 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-3658 [10] BOLT  
  4K-0367 [10] NUT  
  4D-9812 [1] END BIT  
    (MOLDBOARD-LEFT HAND)
  5D-9561 [2] CUTTING EDGE  
  5D-0295 [1] MOLDBOARD ASSEM.  
  1D-4626 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
  4D-8698 [1] BRACKET  
  2D-6341 [1] PIN  
  7B-2501 [1] RING  
  4D-9811 [1] END BIT  
    (MOLDBOARD-RIGHT HAND)
  3F-5108 [2] BOLT  
  4K-0367 [2] NUT  
  3F-5108 [26] BOLT  
  4K-0367 [26] NUT  
  7D-5193 [2] END BIT  
 

#UE0701000301
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
SERIAL NO. 49G305 TO 49G460 INCLUSIVE
PART OF CIRCLE SHOWN ON PAGE 183
c97983 UE070100
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-4076 [1] YOKE  
  1H-5959 [1] SEAL  
  5D-8908 [2] WASHER  
  5D-4057 [1] SHAFT  
  4D-8041 [1] WORM  
  1A-1460 [5] BOLT  
  3B-4508 [5] LOCKWASHER  
  8H-7521 [1] SEAL  
  4D-8184 [2] WASHER  
  5D-1961 [1] CAP  
  1B-4443 [1] NUT  
  3B-4631 [1] COTTER PIN  
  5D-4661 [1] WASHER  
  4H-9105 [1] SEAL  
  1B-5174 [1] PLUG  
  5D-1952 [1] RETAINER ASSEM.  
  5D-1950 [1] BEARING  
    (Part of Retainer Assem. 5D1952)
  5F-5434 [1] VENT ASSEM.  
  4D-8179 [1] SLEEVE  
  5D-1950 [1] BEARING  
    (Part of Housing Assem. 5D1992)
  5D-4092 [1] JOINT ASSEM.  
  5D-4091 [1] SPIDER AND BEARING ASSEM.  
  5D-4409 [2] RING  
    (Part of Spider and Bearing Assem. 5D4091)
  5D-4074 [1] YOKE  
  1B-8738 [4] KEY  
  1D-5120 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  3D-9175 [2] SHAFT  
  5H-6012 [2] SEAL  
  4D-8208 [1] JOINT ASSEM.  
  4D-8212 [1] SPIDER AND BEARING ASSEM.  
  4D-8211 [2] YOKE  
  5D-4184 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  6D-0354 [1] WASHER  
  3D-9179 [1] HOUSING ASSEM.  
  5D-1942 [1] COVER  
  7B-3235 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2R-0239 [1] SEAL  
  5D-1992 [1] HOUSING ASSEM.  
  4D-8042 [1] GEAR (38 Teeth)  
  0S-1601 [16] BOLT  
  7H-7810 [16] NUT  
  5D-1987 [16] WASHER  
  3J-2333 [2] BEARING  
    (Part of Housing Assem. 5D1992)
  1D-4625 [5] BOLT  
  3B-4514 [5] LOCKWASHER  
  4D-8186 [1] PLUG  
  4D-7423 [1] PINION  
  6D-0357 [1] SHAFT  
  5D-1967 [2] WASHER  
  3L-3314 [1] SEAL  
  4D-8189 [1] GASKET  
  5M-5016 [1] NUT  
  4D-8187 [1] LOCK  
  5F-5434 [1] VENT ASSEM.  
  1H-5728 [2] SEAL  
  2D-1683 [1] FITTING  
  6F-8520 [2] BEARING  
    (Part of Housing Assem. 3D9179)
  3D-9174 [2] GEAR (30 Teeth)  
  6F-8520 [2] BEARING  
    (1 in each Cap Assem. 3D9177)
  3D-9177 [2] CAP ASSEM.  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  0L-1351 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  3D-9173 [1] COVER  
  3D-9172 [1] GASKET  
  0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
 

#UE0701000302
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
SERIAL NO. 49G461 TO 49G509 INCLUSIVE
PART OF CIRCLE SHOWN ON PAGE 183
c120024 UE070100
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1H-5959 [1] SEAL  
  5D-8908 [2] WASHER  
  5D-4057 [1] SHAFT  
  4D-8041 [1] WORM  
  4H-9105 [1] SEAL  
  1A-1460 [5] BOLT  
  3B-4508 [5] LOCKWASHER  
  8H-7521 [1] SEAL  
  4D-8184 [2] WASHER  
  5D-1961 [1] CAP  
  1B-4443 [1] NUT  
  3B-4631 [1] COTTER PIN  
  5D-4661 [1] WASHER  
  2B-2236 [1] CAP  
  3B-7745 [1] NIPPLE  
  5D-1952 [1] RETAINER ASSEM.  
  5D-1950 [1] BEARING  
    (Part of Retainer Assem. 5D1952)
  5F-5434 [1] VENT ASSEM.  
  4D-8179 [1] SLEEVE  
  5D-1950 [1] BEARING  
    (Part of Housing Assem. 5D1992)
  5D-4092 [1] JOINT ASSEM.  
  5D-4091 [1] SPIDER AND BEARING ASSEM.  
  5D-4409 [2] RING  
    (Part of Spider and Bearing Assem. 5D4091)
  5D-4074 [1] YOKE  
  1B-8738 [4] KEY  
  1D-5120 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  3D-9175 [2] SHAFT  
  5H-6012 [2] SEAL  
  4D-8208 [1] JOINT ASSEM.  
  4D-8212 [1] SPIDER AND BEARING ASSEM.  
  4D-8211 [2] YOKE  
  6D-0354 [1] WASHER  
  5D-4184 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  5D-4076 [1] YOKE  
  3D-9179 [1] HOUSING ASSEM.  
  5D-1942 [1] COVER  
  7B-3235 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2R-0239 [1] SEAL  
  5D-1992 [1] HOUSING ASSEM.  
  6D-4004 [1] GEAR ASSEM.  
  3D-8818 [1] PLUG  
    (Part of 6D4004 Gear Assem.)
  0S-1601 [15] BOLT  
  7H-7810 [15] NUT  
  5D-1987 [15] WASHER  
  3J-2333 [2] BEARING  
    (Part of Housing Assem. 5D1992)
  4D-8186 [1] PLUG  
  4D-7423 [1] PINION  
  6D-4021 [1] SHAFT  
  5D-1967 [2] WASHER  
  3L-3314 [1] SEAL  
  4D-8189 [1] GASKET  
  5M-5016 [1] NUT  
  4D-8187 [1] LOCK  
  1D-4625 [5] BOLT  
  3B-4514 [5] LOCKWASHER  
  1H-5728 [2] SEAL  
  5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
  3D-9174 [2] GEAR (30 Teeth)  
  6F-8520 [2] BEARING  
    (Part of Housing Assem. 3D9179)
  6F-8520 [2] BEARING  
    (1 in each Cap Assem. 3D9177)
  3D-9177 [2] CAP ASSEM.  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  0L-1351 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  3D-9173 [1] COVER  
  3D-9172 [1] GASKET  
  0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
 

#UE0701000303
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
Serial No. 49G510 to 49G675 inclusive
Part of Circle shown on Page 183
c120962 UE070100
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1H-5959 [1] SEAL  
  5D-8908 [2] WASHER  
  5D-4057 [1] SHAFT  
  4D-8041 [1] WORM  
  4H-9105 [1] SEAL  
  1A-1460 [5] BOLT  
  3B-4508 [5] LOCKWASHER  
  8H-7521 [1] SEAL  
  4D-8184 [2] WASHER  
  5D-1961 [1] CAP  
  1B-4443 [1] NUT  
  3B-4631 [1] COTTER PIN  
  5D-4661 [1] WASHER  
  1B-5174 [1] PLUG  
  5D-1952 [1] RETAINER ASSEM.  
  5D-1950 [1] BEARING  
    (Part of Retainer Assem. 5D1952)
  5F-5434 [1] VENT ASSEM.  
  4D-8179 [1] SLEEVE  
  5D-1950 [1] BEARING  
    (Part of Housing Assem. 6D4047)
  5D-4092 [1] JOINT ASSEM.  
  5D-4091 [1] SPIDER AND BEARING ASSEM.  
  5D-4409 [2] RING  
    (Part of Spider and Bearing Assem. 5D4091)
  5D-4074 [1] YOKE  
  1B-8738 [4] KEY  
  1D-5120 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  3D-9175 [2] SHAFT  
  5H-6012 [2] SEAL  
  4D-8208 [1] JOINT ASSEM.  
  4D-8212 [1] SPIDER AND BEARING ASSEM.  
  4D-8211 [2] YOKE  
  6D-0354 [1] WASHER  
  5D-4184 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  5D-4076 [1] YOKE  
  3D-9179 [1] HOUSING ASSEM.  
  5D-1942 [1] COVER  
  7B-3235 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2R-0239 [1] SEAL  
  6D-4047 [1] HOUSING ASSEM.  
  6D-4004 [1] GEAR ASSEM.  
  3D-8818 [1] PLUG  
    (Part of 6D4004 Gear Assem.)
  0S-1601 [15] BOLT  
  7H-7810 [15] NUT  
  5D-1987 [15] WASHER  
  3J-2333 [2] BEARING  
    (Part of Housing Assem. 6D4047)
  4D-8186 [1] PLUG  
  4D-7423 [1] PINION  
  6D-4021 [1] SHAFT  
  5D-1967 [2] WASHER  
  3L-3314 [1] SEAL  
  4D-8189 [1] GASKET  
  5M-5016 [1] NUT  
  4D-8187 [1] LOCK  
  1D-4625 [5] BOLT  
  3B-4514 [5] LOCKWASHER  
  1H-5728 [2] SEAL  
  5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
  3D-9174 [2] GEAR (30 Teeth)  
  6F-8520 [2] BEARING  
    (Part of Housing Assem. 3D9179)
  6F-8520 [2] BEARING  
    (1 in each Cap Assem. 3D9177)
  3D-9177 [2] CAP ASSEM.  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  0L-1351 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  3D-9173 [1] COVER  
  3D-9172 [1] GASKET  
  0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
 

#UE0701000304
 

CIRCLE REVERSING MECHANISM

CIRCLE REVERSING MECHANISM
Effective with Serial No. 49G676. Part of Circle shown on Page 183B
c125020 UE070100
None CIRCLE REVERSING MECHANISM Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1H-5959 [1] SEAL  
  5D-8908 [2] WASHER  
  5D-4057 [1] SHAFT  
  6D-4542 C [1] WORM  
  4H-9105 [1] SEAL  
  1A-1460 [5] BOLT  
  3B-4508 [5] LOCKWASHER  
  8H-7521 [1] SEAL  
  4D-8184 [2] WASHER  
  5D-1961 [1] CAP  
  1B-4443 [1] NUT  
  3B-4631 [1] COTTER PIN  
  5D-4661 [1] WASHER  
  1B-5174 [1] PLUG  
  5D-1952 [1] RETAINER ASSEM.  
  5D-1950 [1] BEARING  
    (Part of Retainer Assem. 5D1952)
  5F-5434 [1] VENT ASSEM.  
  4D-8179 [1] SLEEVE  
  5D-1950 [1] BEARING  
    (Part of Housing Assem. 6D4047)
  5D-4092 [1] JOINT ASSEM.  
  5D-4091 [1] SPIDER AND BEARING ASSEM.  
  5D-4409 [2] RING  
    (Part of Spider and Bearing Assem. 5D4091)
  5D-4074 [1] YOKE  
  1B-8738 [4] KEY  
  1D-5120 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  3D-9175 [1] SHAFT  
  1A-2029 [4] BOLT  
  3B-4506 [10] LOCKWASHER  
  4D-8208 [1] JOINT ASSEM.  
  4D-8212 [1] SPIDER AND BEARING ASSEM.  
  4D-8211 [2] YOKE  
  6D-0354 [1] WASHER  
  5D-4184 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
  5D-4076 [1] YOKE  
  6F-8520 [2] BEARING  
    (1 in each Cap Assem. 6D3426)
  6D-3426 C [2] CAP ASSEM.  
  0L-1351 [6] BOLT  
  5D-1942 [1] COVER  
  7B-3235 [6] BOLT  
  3B-4508 [6] LOCKWASHER  
  2R-0239 [1] SEAL  
  6D-4047 [1] HOUSING ASSEM.  
  6D-4543 C [1] GEAR (36 teeth)  
  0S-1601 [15] BOLT  
  7H-7810 [15] NUT  
  5D-1987 [15] WASHER  
  3J-2333 [2] BEARING  
    (Part of Housing Assem. 6D4047)
  4D-8186 [1] PLUG  
  4D-7423 [1] PINION  
  6D-4021 [1] SHAFT  
  5D-1967 [1] WASHER  
  3L-3314 [1] SEAL  
  4D-8189 [1] GASKET  
  5M-5016 [1] NUT  
  4D-8187 [1] LOCK  
  1D-4625 [5] BOLT  
  3B-4514 [5] LOCKWASHER  
  5F-5434 [1] VENT ASSEM.  
  2D-1683 [1] FITTING  
  1H-5728 [2] SEAL  
  3D-9174 [2] GEAR (30 teeth)  
  6D-3984 C [1] COVER  
  6D-3419 C [1] HOUSING ASSEM.  
  5B-5821 [2] DOWEL  
    (Part of 6D3419 Assem.)
  3D-9175 [1] SHAFT  
  5D-0704 C [1] GASKET  
  6F-8520 [2] BEARING  
  2M-1538 [6] STUD  
    (Parts of 6D3419 Assem.)
  1D-4717 C [6] NUT  
  3B-4506 C [6] LOCKWASHER  
  3D-9173 [1] COVER  
  3D-9172 [1] GASKET  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0701000305
 

7D-3530: CIRCLE AND BEAM ASSEMBLY

7D3530 CIRCLE AND BEAM ASSEMBLY--Field Installation
Serial No. 49G305 to 49G675 inclusive
Service Replacement for 4D7750 Circle and Beam Assembly
c126872 UE070100
7D3530 CIRCLE AND BEAM ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] BEAM (LEFT HAND)  
2. [1] BRACE (LEFT HAND)  
3. [1] REINFORCEMENT  
4. [2] BRACKET  
5. [1] BEAM (RIGHT HAND)  
6. [2] BRACKET  
7. [2] SHAFT  
8. [2] SHAFT  
9. [2] BRACE  
10. [1] BRACE  
11. [1] ADAPTER  
12. [1] ADAPTER (LEFT HAND)  
  [1] ADAPTER (RIGHT HAND)  
13. [1] BRACE (RIGHT HAND)  
  H [1] REINFORCEMENT (NOT SHOWN)  
  H   NOT PART OF 7D3530 CIRCLE & BE
 

#UE0701000306
 

4D-7800: CIRCLE

CIRCLE (4D7800 N/S)--Part 1 of 2
Serial No. 49G305 to 49G675 inclusive
c123813 UE070100
4D7800 CIRCLE Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4D-7750 [1] CIRCLE AND BEAM ASSEM.  
  4D-7783 [2] BLOCK  
    (Part of Yoke Assem. 5D9189)
  4D-7701 [4] BALL STUD  
    (Part of Bar Assem. 4D7803)
  5D-5461 [1] BRACE (RIGHT HAND)  
  5D-5462 [1] BRACE (LEFT HAND)  
  4D-7482 [1] BEAM (LEFT HAND)  
    (Parts of Circle and Beam Assem. 4D7750)
  5D-3637 [1] REINFORCEMENT (RIGHT HAND)  
  5D-3638 [1] REINFORCEMENT (LEFT HAND)  
  4D-7803 [1] BAR ASSEM.  
  4D-7652 [1] PLATE  
  3H-2483 [1] DOWEL  
  5D-9189 [1] YOKE ASSEM.  
    (Parts of Drawbar Assem. 4D7700)
  4D-7481 [1] BEAM (RIGHT HAND)  
  5D-2357 [2] SHAFT  
  5D-4156 [2] BRACKET  
  4D-7519 [2] SHAFT  
    (Parts of Circle and Beam Assem. 4D7750)
  5D-5439 [1] CAP  
  4D-7387 [1] CONNECTION  
    (Part of Drawbar Assem. 4D7700)
  2B-7410 [1] PLUG  
  5D-4058 [1] SHAFT  
  8D-8489 [2] FITTING  
  4D-8206 [1] BOLT  
  4D-8207 [1] NUT  
  4D-7700 [1] DRAWBAR ASSEM.  
  4D-7702 [6] PLATE  
    (Part of Drawbar Assem. 4D7700)
  5D-4159 [2] BRACKET  
    (Part of Circle and Beam Assem. 4D7750)
  5D-2320 [2] PIN  
  3D-0609 [2] LOCK  
  6H-1717 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  3B-8489 [2] FITTING  
  5D-2359 [4] SHIM  
  5D-2360 [4] WASHER  
  5D-2359 [6] SHIM  
  5D-2361 [2] WASHER  
  8B-9787 [2] PIN  
  3B-4615 [2] COTTER PIN  
  1B-4156 [2] NUT  
  1K-7077 [2] WASHER  
  7F-8564 [2] PIN  
  3B-4617 [2] COTTER PIN  
  3H-5244 [2] NUT  
 

#UE0701000307
 

4D-7800: CIRCLE

CIRCLE (4D7800 N/S)--Part 2 of 2
Serial No. 49G305 to 49G675 inclusive
Circle Reversing Mechanism parts are shown on Pages 179, 180 & 181
c97982 UE070100
4D7800 CIRCLE Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1D-4634 [6] BOLT  
  3D-4905 [6] NUT  
  5D-2906 [12] SHIM (.010" Thick)  
  5D-2907 [20] SHIM (.030" Thick)  
  3B-8489 [2] FITTING  
  4D-8127 [2] SHOE  
  5D-4281 [6] WASHER  
  4D-8318 [4] SET SCREW  
  1B-4333 [4] NUT  
  1B-4333 [4] NUT  
  4D-8318 [4] SET SCREW  
  5D-5232 [12] SHIM (.010" Thick)  
  5D-5233 [20] SHIM (.030" Thick)  
  5D-4281 [6] WASHER  
  3B-8489 [2] FITTING  
  5D-5229 [2] SHOE  
  1D-4634 [6] BOLT  
    (See Separate Illustration)
    (See Separate Illustration)
  4D-8317 [2] BOLT  
  3D-4905 [2] NUT  
  5D-4281 [2] WASHER  
  1K-7078 [2] WASHER  
  5D-2905 [10] SHIM (.030" Thick)  
  5D-2904 [6] SHIM (.010" Thick)  
  1D-4634 [6] BOLT  
  4D-8126 [2] SHOE  
  3D-4905 [6] NUT  
  3B-8489 [2] FITTING  
  Y   SEPARATE ILLUSTRATION
 

#UE0701000308
 

4D-7800: CIRCLE

CIRCLE (4D7800 N/S)--Part 1 of 2
Effective with Serial No. 49G676
c125018 UE070100
4D7800 CIRCLE Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-9189 [1] YOKE ASSEM.  
    (Part of 6D4666 Assem.)
  4D-7783 [2] BLOCK  
    (Part of Yoke Assem. 5D9189)
  4D-7701 [4] BALL STUD  
    (Part of Bar Assem. 4D7803)
  5D-5461 [1] BRACE (Right Hand)  
  5D-5462 [1] BRACE (Left Hand)  
  4D-7482 [1] BEAM (Left Hand)  
    (Parts of Circle and Beam Assem. 6D8031)
  5D-3637 [1] REINFORCEMENT (Right Hand)  
  5D-3638 [1] REINFORCEMENT (Left Hand)  
  4D-7803 [1] BAR ASSEM.  
    (Parts 6D4666 Assem.)
  4D-4738 [1] ADAPTER (Left Hand)  
  4D-4737 [1] ADAPTER (Right Hand)  
  4D-7439 [1] ADAPTER  
    (Parts of 6D8031 Assem.)
  6D-8031 C [1] CIRCLE & BEAM ASSEM.  
  5D-7766 [2] PLATE  
  4D-7481 [1] BEAM (Right Hand)  
  5D-2357 [2] SHAFT  
  5D-4156 [2] BRACKET  
  4D-7519 [2] SHAFT  
    (Parts of Circle and Beam Assem. 6D8031)
  5D-5439 [1] CAP  
  6D-3303 C [1] CONNECTION  
    (Part of Drawbar Assem. 6D4666)
  2B-7410 [1] PLUG  
  6D-4698 C [1] SHAFT  
  3B-8489 [2] FITTING  
  6D-8671 C [1] BOLT  
  5D-8181 C [1] NUT  
  0S-1585 C [4] BOLT  
  3B-4508 C [4] LOCKWASHER  
  4B-4280 C [4] WASHER  
  6D-4666 C [1] DRAWBAR ASSEM.  
  8F-9836 [2] LUG  
  5D-2643 [2] LUG  
  4D-7652 [1] PLATE  
  3H-2483 [1] DOWEL  
  4D-7702 [6] PLATE  
    (Parts of 6D4666 Assem.)
  6D-8302 C [2] BRACKET  
    (Part of Circle and Beam Assem. 6D8031)
  5D-2320 [2] PIN  
  3D-0609 [2] LOCK  
  6H-1717 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  3B-8489 [2] FITTING  
  5D-2359 [4] SHIM  
  5D-2360 [4] WASHER (.188" Thick)  
  5D-2359 [6] SHIM (.020" Thick)  
  5D-2361 [2] WASHER (.375" Thick)  
  8B-9787 [2] PIN  
  3B-4615 [2] COTTER PIN  
  1B-4156 [2] NUT  
  1K-7077 [2] WASHER  
  7F-8564 [2] PIN  
  3B-4617 [2] COTTER PIN  
  3H-5244 [2] NUT  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0701000309
 

4D-7800: CIRCLE

CIRCLE (4D7800 N/S)--Part 2 of 2
Effective with Serial No. 49G676
Circle Reversing Mechanism parts are shown on Page 181A
c125019 UE070100
4D7800 CIRCLE Parts scheme
  For full view, you need register

Parts for your 16 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1D-4634 [6] BOLT  
  3D-4905 [6] NUT  
  5D-2906 [12] SHIM (.010" Thick)  
  5D-2907 [20] SHIM (.030" Thick)  
  3B-8489 [2] FITTING  
  4D-8127 [2] SHOE  
  5D-4281 [6] WASHER  
  4D-8318 [4] SET SCREW  
  1B-4333 [4] NUT  
  1B-4333 [4] NUT  
  4D-8318 [4] SET SCREW  
  5D-5232 [12] SHIM (.010" Thick)  
  5D-5233 [20] SHIM (.030" Thick)  
  5D-4281 [6] WASHER  
  3B-8489 [2] FITTING  
  5D-5229 [2] SHOE  
  1D-4634 [6] BOLT  
    (See Separate Illustration)
  6D-4665 C [1] PIN  
  5D-8159 C [2] PIN ASSEM.  
    (See Separate Illustration)
  4D-8317 [2] BOLT  
  3D-4905 [2] NUT  
  5D-4281 [2] WASHER  
  1K-7078 [2] WASHER  
  5D-2905 [10] SHIM (.030" Thick)  
  5D-2904 C [20] SHIM (.010" Thick)  
  1D-4634 [6] BOLT  
  4D-8126 [2] SHOE  
  3D-4905 [6] NUT  
  3B-8489 [2] FITTING  
  C   INDICATES CHANGE FROM PREVIOUS
  Y   SEPARATE ILLUSTRATION
 

Information:

Specifications
Blade Lift Limit
NO. 12F, 14E & 16 POWER CONTROL (JAW-TYPE WINCH)
Control Valve For A Snow Plow Or Bulldozer<BR> (6J7255)
NO. 16 HYDRAULIC STEERING SYSTEM, STEERING AND BRAKES
Control Valve For The Blade Side-Shift, Snow Wing Or Ripper<BR> (6J7253) (6J7254)
NO. 16 HYDRAULIC STEERING SYSTEM, STEERING AND BRAKES
Control Valve For Wheel Lean Or Blade Tip<BR> (6J7251) (6J7252)
NO. 16 HYDRAULIC STEERING SYSTEM, STEERING AND BRAKES
Bracket For Moldboard Rail
NO. 16 HYDRAULIC STEERING SYSTEM, STEERING AND BRAKES
Disassembly and Assembly
Blade Tip Lock Valve
NO. 16 VEHICLE SYSTEMS
Blade Lift Arms And Shafts
NO. 16 VEHICLE SYSTEMS
Blade Lift Gear Box
NO. 16 VEHICLE SYSTEMS
Blade Sideshift Cylinder
NO. 16 VEHICLE SYSTEMS
Blade Tip Cylinders
NO. 16 VEHICLE SYSTEMS
Blade
NO. 16 VEHICLE SYSTEMS
Blade Assembly
NO. 16 VEHICLE SYSTEMS
Service Magazine
New Bearing Used In Blade Tip Brackets; Different Moldboard Pivot Shafts Used {5254,6151}
1978/04/17
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
2001/04/23

Caterpillar Parts SIS Catalog 16 :

BLADE GROUP
4D-9880 BLADE GROUP
BLADE BRACKET AND GUARD
BLADE BRACKET AND GUARD
BLADE BRACKET AND GUARD
BLADE BRACKET AND GUARD
BLADE BRACKET AND GUARD
BLADE BRACKET AND GUARD
WHEEL LEAN CYLINDER GROUP
4J-3547 WHEEL LEAN CYLINDER GROUP
HYDRAULIC SWIVEL JOINT GROUP
4J-9966 HYDRAULIC SWIVEL JOINT GROUP
LOCK VALVE GROUP
5J-7513 LOCK VALVE GROUP
BLADE SHIFT CYLINDER GROUP
4J-3526 BLADE SHIFT CYLINDER GROUP
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE AND BEAM ASSEMBLY
7D-3530 CIRCLE AND BEAM ASSEMBLY
CIRCLE
4D-7800 CIRCLE
CIRCLE
4D-7800 CIRCLE
CIRCLE
4D-7800 CIRCLE

Truck sale:

Caterpillar 160
 
Caterpillar 160
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.