AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

977K TRAXCAVATOR 11K00001-03918 (MACHINE) FRAME AND BODY Caterpillar SIS



TRACK LOADER 977K TRACK LOADER 11K
 977K TRAXCAVATOR 11K00001-03918 (MACHINE) UE070103 977K 11K   (1967)

Parts group 977K:

  For full view, you need register
FRAME AND BODY
BUMPER GP
BUMPER GROUP
8S-9752 BUMPER GROUP
8S9752 BUMPER GROUP
COUNTERWEIGHT GP
COUNTERWEIGHT GROUP
8S-2577 COUNTERWEIGHT GROUP
8S2577 COUNTERWEIGHT GROUP--2000 Pounds--Type 1
COUNTERWEIGHT GROUP
8S-2577 COUNTERWEIGHT GROUP
8S2577 COUNTERWEIGHT GROUP--2000 Pounds--Type 2
COUNTERWEIGHT GROUP
8S-2578 COUNTERWEIGHT GROUP
8S2578 COUNTERWEIGHT GROUP-3000 Pounds
COUNTERWEIGHT GROUP
8S-2579 COUNTERWEIGHT GROUP
8S2579 COUNTERWEIGHT GROUP--4000 Pounds
DRAWBAR GP
DRAWBAR GP
3S-3397 DRAWBAR GP
DRAWBAR (3S3397 N/S)
Serial No. 11K1 to 11K3133 inclusive
DRAWBAR GP
3S-3397 DRAWBAR GP
DRAWBAR (3S3397 N/S)
Serial No. 11K3134-Up
FLOORPLATE GP
FLOOR PLATES GUARDS AND GRAB IRONS
FLOOR PLATES GUARDS AND GRAB IRONS
FLOOR PLATES, GUARDS AND GRAB IRONS--Top View
Serial No. 11K1 to 11K2996 & 11K2998 to 11K3004 inclusive
FLOOR PLATES GUARDS AND GRAB IRONS
FLOOR PLATES GUARDS AND GRAB IRONS
FLOOR PLATES, GUARDS AND GRAB IRONS--Top View
Serial No. 11K2997 & 11K3005-Up
FLOORPLATE GROUP
2P-4867 FLOORPLATE GROUP
2P4867 FLOORPLATE GROUP
Part of 3P6148 Sound Suppression Installation Arrangement listed on Page 130-1d
FRAME GP
ARM, BEARING, SEAL AND PIN SERVICE GROUP
9K-3834 ARM, BEARING, SEAL AND PIN SERVICE GROUP
9K3834 ARM, BEARING, SEAL AND PIN SERVICE GROUP
Serial No. 11K2380 to 11K3686 inclusive
Provides Field Replacement for 7K4777 Arm Assembly shown on Page 98D
LOADER FRAME REINFORCEMENT GROUP
7K-4581 LOADER FRAME REINFORCEMENT GROUP
7K4581 LOADER FRAME REINFORCEMENT GROUP--Field Installation
Serial No. 11K1 to 11K1733 inclusive
LOADER FRAME
5K-6003 LOADER FRAME
LOADER FRAME (5K6003 N/S)
Serial No. 11K1 to 11K742 and 11K838 to 11K853 inclusive
LOADER FRAME
7K-0111 LOADER FRAME
LOADER FRAME (7K111 N/S)
Serial No. 11K743 to 11K837 & 11K854 to 11K1733 inclusive
LOADER FRAME
7K-0111 LOADER FRAME
LOADER FRAME (7K111 N/S)
Serial No. 11K1734-Up
LOADER FRAME GROUP
7K-2101 LOADER FRAME GROUP
7K2101 LOADER FRAME GROUP
Provides Field Replacement for 5K6200 and 6K7200 Frame Assemblies
BUMPER GROUP
8S-9752 BUMPER GROUP
8S9752 BUMPER GROUP
GUARD GP
CRANKCASE GUARD
6K-8368 CRANKCASE GUARD
CRANKCASE GUARD (6K8368 N/S)--Type 1
CRANKCASE GUARD
6K-8368 CRANKCASE GUARD
CRANKCASE GUARD (6K8368 N/S)--Type 2
RECOIL MECHANISM GUARD
3S-2025 RECOIL MECHANISM GUARD
RECOIL MECHANISM GUARD (3S2025 N/S)
Serial No. 11K1 to 11K3216 inclusive
RECOIL MECHANISM GUARD
3S-2025 RECOIL MECHANISM GUARD
RECOIL MECHANISM GUARD (3S2025 N/S)
Serial No. 11K3217-Up
RADIATOR GUARD HINGE GROUP
2S-1163 RADIATOR GUARD HINGE GROUP
2S1163 RADIATOR GUARD HINGE GROUP
RADIATOR GUARD HINGE GROUP
9S-7870 RADIATOR GUARD HINGE GROUP
9S7870 RADIATOR GUARD HINGE GROUP--Field Installation
RADIATOR GUARD GROUP
9S-9549 RADIATOR GUARD GROUP
9S9549 RADIATOR GUARD GROUP
RADIATOR GUARD GROUP
9S-5700 RADIATOR GUARD GROUP
9S5700 RADIATOR GUARD GROUP
Part of 1P9409 and 9S6233 Arrangements listed on
Pages 144C and 144F
TRACK GUIDING GUARD GROUP
1P-1923 TRACK GUIDING GUARD GROUP
1P1923 TRACK GUIDING GUARD GROUP
TRACK ROLLER GUARD GROUP
2S-2061 TRACK ROLLER GUARD GROUP
2S2061 TRACK ROLLER GUARD GROUP--Type 1
TRACK ROLLER GUARD GROUP
2S-2061 TRACK ROLLER GUARD GROUP
2S2061 TRACK ROLLER GUARD GROUP--Type 2
HOOD GP
HOOD AND GUARD
HOOD AND GUARD
HOOD AND GUARD--Part 1 of 2
Serial No. 11K1 to 11K252 inclusive
Refer also to Page 130 for special parts
HOOD AND GUARD
HOOD AND GUARD--Part 2 of 2
Serial No. 11K1 to 11K252 inclusive
HOOD AND GUARD
HOOD AND GUARD
HOOD AND GUARD--Part 1 of 2
Serial No. 11K253 to 11K942 inclusive
Refer also to Page 130 for special parts
HOOD AND GUARD
HOOD AND GUARD--Part 2 of 2
Serial No. 11K253 to 11K942 inclusive
HOOD AND GUARD
HOOD AND GUARD
HOOD AND GUARD--Part 1 of 2
Serial No. 11K943 to 11K1917 inclusive
Refer also to Page 130 for special parts
HOOD AND GUARD
HOOD AND GUARD--Part 2 of 2
Serial No. 11K943 to 11K1917 inclusive
HOOD AND GUARD
HOOD AND GUARD
HOOD AND GUARD--Part 1 of 2
Serial No. 11K1918 to 11K2363 inclusive
Refer also to Page 130 for special parts
HOOD AND GUARD
HOOD AND GUARD--Part 2 of 2
Serial No. 11K1918 to 11K2363 inclusive
HOOD AND GUARD
3S-2030 HOOD AND GUARD
HOOD AND GUARD (3S2030 N/S)--Part 1 of 2
Serial No. 11K2364 to 11K3219 inclusive
Refer also to Page 130 for special parts
3S-2030 HOOD AND GUARD
HOOD AND GUARD (3S2030 N/S)--Part 2 of 2
Serial No. 11K2364 to 11K3219 inclusive
HOOD AND GUARD
3S-2030 HOOD AND GUARD
HOOD AND GUARD (3S2030 N/S)--Part 1 of 2
Serial No. 11K3220 to 11K3322 inclusive. Refer also to Page 130
for special parts
3S-2030 HOOD AND GUARD
HOOD AND GUARD (3S2030 N/S)--Part 2 of 2
Serial No. 11K3220 to 11K3322 inclusive
HOOD AND GUARD
3S-2030 HOOD AND GUARD
HOOD AND GUARD (3S2030 N/S)--Part 1 of 2
Effective with Serial No. 11K3323. Refer also to Page 130
for special parts
3S-2030 HOOD AND GUARD
HOOD AND GUARD (3S2030 N/S)--Part 2 of 2
Effective with Serial No. 11K3323
HOOD AND GUARD GROUP
8S-1712 HOOD AND GUARD GROUP
8S1712 HOOD AND GUARD GROUP
Serial No. 11K1 to 11K942 inclusive
FOR USE IN LANDFILL OPERATIONS
HOOD AND GUARD GROUP
8S-9797 HOOD AND GUARD GROUP
8S9797 HOOD AND GUARD GROUP
Effective with Serial No. 11K943
FOR USE IN LANDFILL OPERATIONS
HOOD AND GUARD GROUP
8S-9797 HOOD AND GUARD GROUP
8S9797 HOOD AND GUARD GROUP--Type 2
Serial No. 11K943-Up
FOR USE IN LANDFILL OPERATIONS
HOOK GP
FRONT PULL HOOK GROUP
4S-8076 FRONT PULL HOOK GROUP
4S8076 FRONT PULL HOOK GROUP
STEEL MILL AR
8S-9777 STEEL MILL TRAXCAVATOR ARRANGEMENT
8S9777 STEEL MILL TRAXCAVATOR ARRANGEMENT
Factory Installation With Fire Resistant Fluid
9S-6232 STEEL MILL TRAXCAVATOR ARRANGEMENT
9S6232 STEEL MILL TRAXCAVATOR ARRANGEMENT
Effective with Serial No. 11K943
Only separate parts serviced. When complete arrangement
is required order 1P9414 listed on Page 144B.
Factory Installation With Fire Resistant Fluid
5S-3270 STEEL MILL TRAXCAVATOR ARRANGEMENT
5S3270 STEEL MILL TRAXCAVATOR ARRANGEMENT
Part of 8S9777 Steel Mill Traxcavator Arrangement
1P-4840 STEEL MILL TRAXCAVATOR ARRANGEMENT
1P4840 STEEL MILL TRAXCAVATOR ARRANGEMENT--Factory Installation
With Fire Resistant Fluid. Effective with Serial No. 11K943. Only separate
parts serviced. When complete Arrangement is required order 1P9414
1P-9414 STEEL MILL TRAXCAVATOR ARRANGEMENT
1P9414 STEEL MILL TRAXCAVATOR ARRANGEMENT--Factory Installation
With Fire Resistant Fluid
Effective with Serial No. 11K943
1P-9409 STEEL MILL ARRANGEMENT
1P9409 STEEL MILL ARRANGEMENT
Serial No. 11K943-Up
Part of 1P9414 Arrangement
9S-6233 STEEL MILL ARRANGEMENT
9S6233 STEEL MILL ARRANGEMENT
Part of 9S6232 and 1P4840 Steel Mill Traxcavator Arrangements listed on
Pages 144 and 144B. Only separate parts serviced. When complete Group
is required order 1P9409 listed on Page 144C
SUPPRESSION GP-SOUND
2P-4859 NOISE SUPPRESSION ARRANGEMENT
2P4859 NOISE SUPPRESSION ARRANGEMENT
FACTORY INSTALLATION
3P-6148 SOUND SUPPRESSION INSTALLATION ARRANGEMENT
3P6148 SOUND SUPPRESSION INSTALLATION ARRANGEMENT--Factory Installation
FOR USE WITH 3P5982 ROLL-OVER PROTECTIVE SYSTEM LISTED ON PAGE 130-6

Information:

(For parts list, see above)

Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Disassembly and Assembly
Counterweight
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Service Magazine
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Disassembly and Assembly
Front Idler Yokes
977L TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Use Correct Bolts, Nuts, Torque, And Installation Procedure When ROPS (Roll Over Protective Structure) Is Installed{7323,7325}
1977/02/14
Specifications
Loader Frame
977 TRACK-TYPE LOADER HYDRAULIC SYSTEM
Service Magazine
Lift Cylinders Can Be Damaged By Debris In Loader Frame Towers{5102,7054}
1981/01/26
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Specifications
Track Roller Guard
977 TRACK-TYPE LOADER POWER TRAIN
Disassembly and Assembly
Hood, Muffler And Precleaner Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Front Crankcase Guards
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Oil Pan Plate
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Radiator And Guard
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Crankcase Guard (Rear)
977L TRACK-TYPE LOADER POWER TRAIN
Service Magazine
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
Disassembly and Assembly
Hood, Muffler And Precleaner Assembly
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Front Crankcase Guards
3306 VEHICULAR ENGINE FOR 977L TRACK-TYPE LOADER
Service Magazine
Carrier Roller Replacement Rims Now Available{4154}
1984/03/12
Use Correct Bolts, Nuts, Torque, And Installation Procedure When ROPS (Roll Over Protective Structure) Is Installed{7323,7325}
1977/02/14
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
When To Add Oil Or Make Repairs To Sealed And Lubricated Track{0336,4170}
1977/03/21
Remove The Paint From The Seal Counterbore On Track Links For Sealed And Lubricated Track{4169}
1977/09/05
Changes Made To Front Idler Group To Keep Idler Collar Bolts Tight{4159,4168}
1978/10/23
New Caterpillar Extended Life Track Roller Groups Available{4180}
1990/10/15
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Special Instruction
Assembly and Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

Truck sale:

Caterpillar 977K, Construction
10,250 USD 
Caterpillar 977K, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 977K, Construction
9,500 
Caterpillar 977K, Construction
- track loaders
MICHIGAN CAT
CATERPILLAR 977K 1969
 
CATERPILLAR 977K 1969
- TRACK LOADERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
3508 - 1974 CAT 977K
 
3508 - 1974 CAT 977K

avspare
1970 CAT 977K
USD $9,500 
1970 CAT 977K

WEACO EQUIPMENT
Womelsdorf, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.