AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Front View--Part 2 of 2 Serial No. 82J2966, 2970 to 2972, 2974, 2976, 2978 to 3041, 3043 to 3045, 3049, 3050, 3054 and 82J3055 inclusive D4D


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 82J
 D4D TRACTOR / DIRECT DRIVE / 82J00001-03443 (MACHINE) UE070118 D4D 82J   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
 

#UE0701180040
 

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Front View--Part 2 of 2
Serial No. 82J2966, 2970 to 2972, 2974, 2976, 2978 to 3041,
3043 to 3045, 3049, 3050, 3054 and 82J3055 inclusive
c135475 UE070118
7S1236 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 [25] LOCKWASHER  
5. 0S-1594 [8] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 [1] COVER ASSEM.  
12. 0T-0101 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
    (Parts of 9S8991 Cover Assem.)
15. 5S-8055 [1] GASKET  
16. 1A-2029 [3] BOLT  
17. 7S-1803 [1] CAP ASSEM.  
18. 5S-8115 [1] GAUGE ASSEM.  
19. 5M-6213 [1] PLUG  
20. 4H-6112 [1] BREATHER  
21. 9S-3188 [1] LOCK  
22. 4M-4419 [1] LOCK  
23. 9S-1796 [1] TUBE ASSEM.  
24. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
25. 8S-1326 [1] FITTING  
26. 4B-7739 [1] PLUG  
27. 1A-1460 [13] BOLT  
28. 5M-9131 [1] LOCK  
29. 5M-9134 [1] LOCK  
30. 5M-9135 [1] LOCK  
31. 5M-9132 [1] LOCK  
32. 5M-9136 [1] LOCK  
33. 8S-6018 [1] PAN  
34. 1A-5964 [5] BOLT  
35. 1P-2698 [1] PIPE  
  7S-1801 [1] ANCHOR  
 

#UE0701180041
 

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Side View--Part 1 of 2
Serial No. 82J3042, 3046 to 3048, 3051 to 3053, 3056, 3269, 3272, 3277 and 82J3280 to 82J3285 inclusive
Cylinder Block parts are shown on Page 20. See Page 22 for Gasket Kits
c135817 UE070118
7S1236 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-5426 [1] HOUSING (Flywheel)  
2. 5M-6213 [4] PLUG  
3. 9H-5921 [1] GASKET  
4. Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
5. 9S-6557 [4] LINER  
6. 5S-6670 [8] SEAL  
7. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
8. 7M-4593 [4] PLUG  
9. 0L-1351 [21] BOLT  
10. 3B-4506 [48] LOCKWASHER  
11. 5M-1903 [1] COVER  
12. 4M-2250 [1] GASKET  
13. 0S-1594 [8] BOLT  
14. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
    (Part of 9S2273 Plate Assem.)
15. 5M-6214 [1] PLUG  
16. 5S-7134 [1] GASKET  
17. 5S-7135 [1] GASKET  
18. 2A-4639 [5] BOLT  
19. 8S-1963 [1] GASKET  
20. 9H-6067 [1] SEAL  
21. 8S-0499 [1] TUBE ASSEM.  
22. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
23. 0S-1591 [12] BOLT (1.25" Long)  
  0L-1352 [2] BOLT (1.125" Long)  
24. 8S-1959 [1] PLATE ASSEM.  
25. 5S-6045 [1] GASKET  
26. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
27. 5B-5946 [1] PLUG  
  2B-5721 [1] GASKET  
28. 9S-1760 [1] TUBE  
29. 3B-8998 [2] FITTING  
  1F-1344 [2] NUT  
    (1 in each 3B8998 Fitting)
  Y   SEPARATE ILLUSTRATION
 

#UE0701180042
 

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Front View--Part 2 of 2
Serial No. 82J3042, 3046 to 3048, 3051 to 3053, 3056, 3269, 3272, 3277 and 82J3280 to 82J3285 inclusive
c137215 UE070118
7S1236 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 [25] LOCKWASHER  
5. 0S-1594 [8] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 [1] COVER ASSEM.  
12. 0T-0101 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
15. 5S-8055 [1] GASKET  
16. 1A-2029 [3] BOLT  
17. 7S-1803 [1] CAP ASSEM.  
18. 5S-8115 [1] GAUGE ASSEM.  
19. 5M-6213 [1] PLUG  
20. 8S-5820 C [1] BREATHER  
21. 9S-3188 [1] LOCK  
22. 4M-4419 [1] LOCK  
23. 9S-1796 [1] TUBE ASSEM.  
24. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
25. 8S-1326 [1] FITTING  
26. 4B-7739 [1] PLUG  
27. 1A-1460 [13] BOLT  
28. 5M-9131 [1] LOCK  
29. 5M-9134 [1] LOCK  
30. 5M-9135 [1] LOCK  
31. 5M-9132 [1] LOCK  
32. 5M-9136 [1] LOCK  
33. 8S-6018 [1] PAN  
34. 1A-5964 [5] BOLT  
35. 1P-2698 [1] PIPE  
  7S-1801 [1] ANCHOR  
  C   INDICATES CHANGE
 

#UE0701180043
 

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Side View--Part 1 of 2
Serial No. 82J3270, 3271, 3273 to 3276, 3278, 3279 and 82J3286-Up
2P8774 Cylinder Block parts are shown on Page 20A. See Page 22 for Gasket Kits
c141067 UE070118
7S1236 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-5426 [1] HOUSING (Flywheel)  
2. 5M-6213 [4] PLUG  
3. 9H-5921 [1] GASKET  
4. 2P-8774 RYC [1] BLOCK ASSEM.  
    (Separate Illustration)
5. 2P-8889 C [4] LINER  
6. 5S-6670 C [12] SEAL  
7. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
8. 7M-4593 [4] PLUG  
9. 0L-1351 [21] BOLT  
10. 3B-4506 C [29] LOCKWASHER  
11. 5M-1903 [1] COVER  
12. 4M-2250 [1] GASKET  
13. 0S-1594 [8] BOLT  
14. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
15. 5M-6214 [1] PLUG  
16. 5S-7135 [1] GASKET  
17. 5S-7135 [1] GASKET  
18. 2A-4639 [5] BOLT  
19. 8S-1963 [1] GASKET  
20. 9H-6067 [1] SEAL  
21. 8S-0499 [1] TUBE ASSEM.  
22. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
23. 0S-1591 [12] BOLT (1.25" Long)  
  0L-1352 [2] BOLT (1.125" Long)  
24. 8S-1959 [1] PLATE ASSEM.  
25. 5S-6045 [1] GASKET  
26. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
27. 5B-5946 [1] PLUG  
  2B-5721 [1] GASKET  
28. 9S-1760 [1] TUBE  
29. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
30. 5M-2894 C [19] WASHER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UE0701180044
 

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Front View--Part 2 of 2
Serial No. 82J3270, 3271, 3273 to 3276, 3278, 3279 and 82J3286-Up
c141068 UE070118
7S1236 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-0633 [1] SUPPORT ASSEM.  
2. 7S-1234 [1] BUSHING ASSEM.  
3. 0L-1143 [9] BOLT  
4. 3B-4506 C [17] LOCKWASHER  
5. 0S-1594 [8] BOLT  
6. 9S-3187 [1] LOCK  
7. 9H-4891 [1] GASKET  
8. 1B-4203 [6] NUT  
9. 2N-2753 [1] COVER  
10. 1C-2251 [2] BOLT  
11. 9S-8991 [1] COVER ASSEM.  
12. 0T-0101 [4] STUD  
13. 8S-6814 [2] DOWEL  
14. 3B-2460 [1] STUD  
15. 5S-8055 [1] GASKET  
16. 1A-2029 C [3] BOLT  
  4B-4278 [3] WASHER  
17. 7S-1803 [1] CAP ASSEM.  
18. 5S-8115 [1] GAUGE ASSEM.  
19. 5M-6213 [1] PLUG  
20. 8S-5820 [1] BREATHER  
21. 9S-3188 [1] LOCK  
22. 4M-4419 [1] LOCK  
23. 9S-1796 [1] TUBE ASSEM.  
24. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
25. 8S-1326 [1] FITTING  
26. 4B-7739 [1] PLUG  
27. 1A-1460 [13] BOLT  
28. 5M-9131 [1] LOCK  
29. 5M-9134 [1] LOCK  
30. 5M-9135 [1] LOCK  
31. 5M-9132 [1] LOCK  
32. 5M-9136 [1] LOCK  
33. 2P-2386 C [1] PAN  
34. 1A-5964 C [5] BOLT  
  5M-2894 [5] WASHER  
35. 1P-2698 [1] PIPE  
  7S-1801 [1] ANCHOR  
  C   INDICATES CHANGE
 

#UE0701180045
 

5S-6407: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (5S6407 N/S)
Serial No. 82J1 to 3269, 3272, 3277 and 82J3280 to 82J3285 inclusive
Part of Cylinder Block and Covers shown on Pages 18, 18B, 18D, 18F, 18H & 18K
Note: For Field Replacement order 8S3711 Service Block Assembly
c130130 UE070118
5S6407 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1H-0974 [1] DOWEL  
10. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Group)
    -or-
  1P-2717 [5] BEARING CAP  
11. 7S-3224 [10] BOLT  
12. 2S-5658 [10] WASHER  
13. 8S-0835 [1] DOWEL  
14. 5S-6420 [2] BEARING  
15. 4B-9782 [5] BALL  
16. 5S-6419 [4] BEARING  
17. 2A-3798 [2] DOWEL  
18. 7M-4046 [2] BEARING  
 

#UE0701180046
 

2P-8774: CYLINDER BLOCK AS

2P8774 CYLINDER BLOCK ASSEMBLY
Serial No. 82J3270, 3271, 3273 to 3276, 3278, 3279 and 82J3286-Up
Part of Cylinder Block and Covers shown on Page 19A. Note: For Field Replacement
order 2P8774 plus 1--2P8783 Hardware Kit
c117455 UE070118
2P8774 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLUG  
2. [2] DOWEL  
3. [2] DOWEL  
4. [3] PLUG  
5. [2] PLUG  
6. [2] DOWEL  
7. [1] STUD  
8. [1] BEARING  
9. [1] DOWEL  
10. [5] BEARING CAP  
11. [10] BOLT  
12. [10] WASHER  
13. [1] DOWEL  
14. [2] BEARING  
15. [5] BALL  
16. [4] BEARING  
17. [2] DOWEL  
18. [2] BEARING  
 

#UE0701180047
 

7S-5110: CRANKSHAFT GROUP

7S5110 CRANKSHAFT GROUP
c161412 UE070118
7S5110 CRANKSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7S-3103 [1] SEAL  
    -OR-
  7S-9736 C [1] SEAL ASSEM.  
    (For Worn Journal)
  2P-0716 C [2] PLATE  
  9F-2247 [4] PLUG  
    (Part of Crankshaft Assem. 5S5252)
  3S-9730 [5] BEARING  
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
  C   INDICATES CHANGE
 

#UE0701180048
 

CRANKSHAFT BEARINGS AND THRUST PLATE GROUP

CRANKSHAFT BEARINGS AND THRUST PLATE GROUP
UE0701180048 UE070118
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4S-8881 [5] BEARING (.010 UNDERSIZE)  
  4S-8883 [5] BEARING (.020 UNDERSIZE)  
  4S-8885 [5] BEARING (.030 UNDERSIZE)  
  6N-4129 [1] THRUST PLATE GROUP  
    (Includes both wide and narrow Thrust Plates and Form GMG02570)
  6N-3822 [5] BEARING MAIN (.020 OVERSIZE AND .010 UNDERSIZE)  
  6N-3823 [5] BEARING MAIN (.020 OVERSIZE)  
 

#UE0701180049
 

GASKET KITS

GASKET KITS
c999999 UE070118
None GASKET KITS Parts scheme
  For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
47. 8T-4183 M [10] BOLT (M12X1.75X40MM)  
48. 8T-4194 M [20] BOLT (M12X1.75X50MM)  
49. 1P-5767 [22] FLANGE-HALF  
50. 4Q-0707 [2] CONNECTOR-QUICK  
51. 4Q-0579 [2] CAP-QUICK  
52. 107-3636 [2] CONNECTOR  
53. 107-3637 [2] SEAL  
54. 005-6985 [2] NIPPLE AS  
55. 132-7100 [2] CAP-DUST  
56. 6V-8634 [2] CONNECTOR-O-RING  
57. 127-6816 [2] PLATE  
58. 142-0473 [2] HOSE AS  
59. 6V-8398 [4] SEAL-O-RING (16.03MM OD)  
60. 132-9172 [2] PLATE  
61. 6V-8995 [2] UNION-BULKHEAD (13/16-16 THD)  
62. 6V-9169 [2] NUT-BULKHEAD (11/16-16 THD)  
63. 142-0472 [2] HOSE AS  
64. 178-4943 [1] HOSE AS  
65. 178-4942 [2] HOSE AS  
66. 131-4063 [1] TUBE AS  
67. 131-4064 [1] TUBE AS  
68. 132-9174 [2] HOSE AS  
69. 143-4294 [2] HOSE AS  
70. 137-1594 [7] VALVE AS-BALL  
71. 7X-2543 M [14] BOLT (M10X1.5X120MM)  
72. 9S-4191 [7] PLUG-O-RING (9/16-18 THD)  
73. 8T-4184 M [28] BOLT (M12X1.75X45MM)  
74. 141-8032 [1] PLATE  
75. 113-2004 M [4] BOLT-HEX (M12X1.75X45MM)  
76. 5K-9090 [3] SEAL-O-RING (23.52MM ID)  
77. 8T-4244 [2] NUT (M12X1.75 THD)  
78. 130-9862 [1] BRACKET  
79. 6V-8998 [1] UNION-O-RING (1-7/16-12 THD)  
80. 6V-9172 [1] NUT-BULKHEAD (1-7/16 - 12 THD)  
81. 6V-8994 [2] UNION-BULKHEAD (11/16-16 THD)  
82. 6V-9168 [2] NUT (11/16-16 THD)  
83. 7Y-4199 [2] HOSE AS  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Cylinder Liners
D4 TRACTOR ENGINE
Crankshaft Main Bearings
D4 TRACTOR ENGINE
Camshaft Bearings
D4 TRACTOR ENGINE
Balancer Shaft Bearings
D4 TRACTOR ENGINE
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18

Caterpillar Parts SIS Catalog D4D :

CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVER
CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
7S-1236 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8774 CYLINDER BLOCK AS
CRANKSHAFT GROUP
7S-5110 CRANKSHAFT GROUP
CRANKSHAFT BEARINGS AND THRUST PLATE GROUP

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.