6K4665 FINAL DRIVE GROUP--Lower Half--Part 2 of 2 Serial No. 82J3273 to 82J3286 inclusive NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES--1V3672 SNOW SPROCKET REPLACEMENT RIM IS AVAILABLE D4D

POWER TRAIN

DRIVE GP-FINAL

0. 6K-4665 FINAL DRIV
1. 6K-4665 FINAL DRIV
2. 6K-4665 FINAL DRIV

STEERING AND BRAKING SYSTEM

BRAKE GP

3. 4K-5027 BRAKES
4. 4K-5027 BRAKES

FRAME AND BODY

FRAME GP

5. 6K-5866 MAIN FRAME
6. 6K-5866 MAIN FRAME
7. 9K-8480 FRAME GP

UNDERCARRIAGE

IDLER GP

8. 9H-5827 FRONT IDLE
9. 9H-5827 FRONT IDLE
0. INFORMATION

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 82J
D4D TRACTOR / DIRECT DRIVE / 82J00001-03443 (MACHINE) UE070118 D4D 82J (1968)

POWER TRAIN

DRIVE GP-FINAL

6K-4665 FINAL DRIVE

#UE0701180160

6K-4665: FINAL DRIVE

FINAL DRIVE

6K4665 FINAL DRIVE GROUP--Lower Half--Part 2 of 2
Serial No. 82J3273 to 82J3286 inclusive
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES--1V3672 SNOW SPROCKET
REPLACEMENT RIM IS AVAILABLE

c140954 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7K-4771	[2]	GEAR (52 TEETH)
3F-1530	[2]	GUARD
1B-4203	[8]	NUT
3B-4506	[8]	LOCKWASHER
4K-6049 R	[4]	SEAL GROUP
3K-3815	[20]	BOLT
6B-6683	[20]	NUT
2A-3710	[10]	LOCK
6K-4618	[2]	HUB
1A-2610	[4]	DOWEL
4B-9374	[2]	CUP
4B-9373	[2]	CONE
7H-2742	[2]	NUT
2B-8847	[2]	RING
2B-8093	[2]	PIN
6K-4617	[2]	SHAFT
1M-1940	[2]	GASKET
1M-1941	[2]	PLATE
0S-1585	[44]	BOLT
3B-4508	[44]	LOCKWASHER
4K-0212	[4]	RETAINER
2K-2939	[4]	SEAL
4F-6029	[4]	GUARD
5K-1765	[12]	RIVET
		(1/2 EACH IN 7K5481 ASSEM.)
1B-5170	[2]	PLUG
4K-0173	[8]	RING
		(2 IN EACH SEAL GROUP 4K6049)
4F-8396	[2]	GUARD
4B-1322	[12]	SCREW
3B-4504	[12]	LOCKWASHER
7K-3582	[2]	NUT
7K-5481	[2]	SPROCKET ASSEM. (STANDARD)
		NOTE: 7K2514 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
0S-0509	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0S-0509	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1A-4145	[2]	LOCK
3F-1547	[2]	SEAL
3F-1542	[2]	DOWEL
		(1 IN EACH 9K5382 ASSEM.)
9K-6842 C	[2]	CAGE ASSEM.
6B-3223	[1]	CUP
		(PART OF 9K6842 ASSEM.)
4B-7270	[2]	CONE
3H-2617	[4]	PIN (SPRING)
		(2 IN EACH RETAINER ASSEM. 3F1554)
5K-5887	[2]	KEY
3F-1556	[2]	CAP
2B-8828	[2]	NUT
3F-1552	[8]	SHIM
5B-5821	[4]	DOWEL
		(2 IN EACH 9K5382 ASSEM.)
2F-2815	[2]	LOCK
9K-5382 C	[2]	HOLDER ASSEM.
3F-1554	[2]	RETAINER ASSEM
3F-1537	[2]	NUT
3F-1536	[2]	LOCK
3F-1548	[2]	BUSHING
		(IN EACH SUPPORT ASSEM. 1M1947)
0S-1587	[12]	BOLT
3B-4508	[12]	LOCKWASHER
3F-1555	[2]	GASKET
1M-1947	[2]	SUPPORT ASSEM.
3B-8486	[2]	FITTING
2M-0122	[4]	DOWEL
4B-1280	[16]	SCREW
3F-1546	[2]	RETAINER
5K-1787	[2]	SEAL
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#UE0701180161

6K-4665: FINAL DRIVE

FINAL DRIVE

FINAL DRIVE (6K4665 N/S)--Upper Half--Part 1 of 2
Serial No. 82J3287-Up
Note: Quantities shown are those required for both R.H. and L.H. sides

c140134 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1825	[ 28]	BOLT
3B-4508	[ 28]	LOCKWASHER
7K-7333	[ 2]	RETAINER
0S-1591	[ 12]	BOLT
5M-2894	[ 12]	WASHER
3K-9619	[ 2]	SEAL
9K-4058 C	[ 2]	LOCK
2J-5815 C	[ 2]	NUT
2B-6325	[ 2]	GASKET
1H-9456 C	[ 4]	BOLT
7K-8238	[ 2]	FLANGE
7K-8237	[ 2]	DRUM
7K-5209	[ 2]	CASE ASSEM
5B-7267	[ 4]	CORK
0L-1392	[ 8]	STUD
		(4 IN EACH 7K5209 ASSEM.)
2A-3746	[ 2]	PLUG
3F-1526	[ 2]	DOWEL
7K-3007	[ 2]	GASKET
5K-1311	[ 2]	GASKET
3F-4746	[ 2]	DOWEL
4H-0254	[ 2]	DOWEL
1M-1930	[ 2]	CAGE
1M-1795	[ 2]	SPACER
5K-8591	[ 2]	RACE AND ROLLER ASSEM
3B-3969	[ 2]	RACE (INNER)
8B-2571	[ 2]	RACE AND ROLLER ASSEM
8B-2570	[ 2]	RACE (OUTER)
7K-4770	[ 2]	PINION (9 TEETH)
2M-0534	[ 2]	RACE AND ROLLER ASSEM
2M-0533		RACE (OUTER)
		INDICATES CHANGE

#UE0701180162

6K-4665: FINAL DRIVE

FINAL DRIVE

6K4665 FINAL DRIVE GROUP--Lower Half--Part 2 of 2
Serial No. 82J3287-Up
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES--1V3672 SNOW SPROCKET
REPLACEMENT RIM IS AVAILABLE

c143254 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7K-4771	[ 2]	GEAR (52 TEETH)
3F-1530	[ 2]	GUARD
1B-4203	[ 8]	NUT
3B-4506	[ 8]	LOCKWASHER
4K-0212	[ 4]	RETAINER
3K-3815	[ 20]	BOLT
6B-6683	[ 20]	NUT
2A-3710	[ 10]	LOCK
6K-4618	[ 2]	HUB
1A-2610	[ 4]	DOWEL
4B-9374	[ 2]	CUP
4B-9373	[ 2]	CONE
7H-2742	[ 2]	NUT
2B-8847	[ 2]	RING
2B-8093	[ 2]	PIN
6K-4617	[ 2]	SHAFT
7M-7260 C	[ 1]	CAN LIQUID GASKET
8K-6521 C	[ 2]	PLATE
0S-1585	[ 28]	BOLT
3B-4508	[ 28]	LOCKWASHER
0S-1585 C	[ 16]	BOLT
2M-0849 C	[ 16]	WASHER
4K-0173	[ 2]	RING
		(Part of 4K6049 Group)
3N-0801	[ 2]	RING
		(Part of 5P376 Group)
4F-6029	[ 2]	GUARD
5K-1765	[ 6]	RIVET
		(Parts of 7K5481 Assem.)
1B-5170	[ 2]	PLUG
4F-8396	[ 2]	GUARD
4B-1322	[ 12]	SCREW
3B-4504	[ 12]	LOCKWASHER
7K-3582	[ 2]	NUT
4K-6049	[ 4]	SEAL GROUP
		-OR-
5P-0376 C	[ 4]	SEAL GROUP
		(High Temperature)
2K-2939	[ 4]	SEAL
7K-5481	[ 2]	SPROCKET ASSEM (STANDARD)
0S-0509	[ 8]	BOLT
3B-4506	[ 8]	LOCKWASHER
0S-0509	[ 2]	BOLT
3B-4506	[ 2]	LOCKWASHER
1A-4145	[ 2]	LOCK
3F-1547	[ 2]	SEAL
3F-1542	[ 2]	DOWEL
		(1 IN EACH 9K5382 ASSEM)
9K-6842	[ 2]	CAGE ASSEM
6B-3223	[ 1]	CUP
		(PART OF 9K6842 ASSEM)
4B-7270	[ 2]	CONE
3H-2617	[ 4]	PIN (SPRING)
		(2 IN EACH RETAINER ASSEM. 3F1554)
5K-5887	[ 2]	KEY
3F-1556	[ 2]	CAP
2B-8828	[ 2]	NUT
3F-1552	[ 8]	SHIM
5B-5821	[ 4]	DOWEL
		(2 IN EACH 9K5382 ASSEM)
2F-2815	[ 2]	LOCK
9K-5382	[ 2]	HOLDER ASSEM.
3F-1554	[ 2]	RETAINER ASSEM
3F-1537	[ 2]	NUT
3F-1536	[ 2]	LOCK
3F-1548	[ 2]	BUSHING
		(1 IN EACH SUPPORT ASSEM. 1M1947)
0S-1587	[ 12]	BOLT
3B-4508	[ 12]	LOCKWASHER
3F-1555	[ 2]	GASKET
1M-1947	[ 2]	SUPPORT ASSEM
3B-8486	[ 2]	FITTING
2M-0122	[ 4]	DOWEL
4B-1280	[ 16]	SCREW
3F-1546	[ 2]	RETAINER
5K-1787	[ 2]	SEAL
		INDICATES CHANGE

#UE0701180163

4K-5027: BRAKES

BRAKES

BRAKES (4K5027 N/S)
Serial No. 82J1 to 82J2522 inclusive

c131011 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-0606	[1]	PIN
		(PART OF SUPPORT ASSEM. 4K5557)
0S-0175	[4]	PIN
3B-4617	[4]	COTTER PIN
3K-4725	[4]	LINK
1M-1789	[2]	LEVER
0S-1585	[8]	BOLT
3B-4508	[8]	LOCKWASHER
3K-4708	[2]	ANCHOR
7H-3908	[4]	PIN
7H-3788	[2]	FORK
7H-3922	[2]	BAND ASSEM.
7H-3926	[2]	BAND ASSEM.
1D-4716	[16]	NUT
3B-4505	[16]	LOCKWASHER
1D-5117	[2]	NUT
3K-4724	[2]	SCREW
4K-6345	[2]	NUT
7B-5054	[32]	RIVET
5H-6030	[4]	LINING
3K-5802	[8]	BOLT
		(1/2 OF EACH IN EACH BAND ASSEM. 7H3922)
5H-6030	[4]	LINING
7B-5054	[32]	RIVET
		(1/2 OF EACH IN EACH BAND ASSEM. 7H3926)
6H-1298	[1]	SPRING
5K-0634	[1]	PIN
		(PART OF PAWL ASSEM. 5K627)
4K-5557	[1]	SUPPORT ASSEM.
9F-2978	[2]	NUT
		(PART OF SUPPORT ASSEM. 4K5557)
0S-1591	[2]	BOLT
3B-4506	[2]	LOCKWASHER
8S-9092	[2]	BOLT
1D-4720	[2]	NUT
4K-5268	[2]	SHAFT
3K-4723	[4]	KEY
5K-0627	[1]	PAWL ASSEM.
5K-0633	[1]	PIN
9S-1315	[2]	PIN
3B-4617	[2]	COTTER PIN
4K-5110	[1]	LEVER (RIGHT HAND)
4K-5622	[1]	LEVER (LEFT HAND)
0S-1585	[2]	BOLT
3K-4709	[1]	LEVER (RIGHT HAND)
3K-4710	[1]	LEVER (LEFT HAND)
1M-1794	[2]	BAND ASSEM.
5H-6030	[4]	LINING
7B-5054	[32]	RIVET
3K-5802	[8]	BOLT
		(1/2 OF EACH IN EACH BAND ASSEM. 1M1794)
3B-8686	[2]	FITTING
9H-4280	[2]	LINING GROUP
		EACH CONSISTING OF A COMPLETE SET OF LININGS AND RIVETS FOR ONE BRAKE.
4K-5213	[1]	PEDAL (RIGHT HAND)
4K-5214	[1]	PEDAL (LEFT HAND)
6K-3475	[1]	RATCHET
4H-4641	[1]	PIN
3B-4617	[1]	COTTER PIN
4K-5284	[2]	ROD ASSEM.
4B-6493	[2]	SPRING
9S-1354	[2]	NUT
9S-1315	[2]	PIN
3B-4617	[2]	COTTER PIN
4K-5563	[2]	END
4K-5251	[2]	BRACKET
0S-1587	[6]	BOLT
3B-4508	[6]	LOCKWASHER
1K-2602	[2]	WASHER
8F-5340	[4]	SEAL
3B-4629	[2]	COTTER PIN
1M-1917	[2]	SHAFT
4F-2926	[4]	BEARING

#UE0701180164

4K-5027: BRAKES

BRAKES

BRAKES (4K5027 N/S)
Serial No. 82J2523-Up

c116419 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-0606	[ 1]	PIN
		(PART OF SUPPORT ASSEM. 4K5557)
0S-0175	[ 4]	PIN
3B-4617	[ 4]	COTTER PIN
3K-4725	[ 4]	LINK
1M-1789	[ 2]	LEVER
0S-1585	[ 8]	BOLT
3B-4508	[ 8]	LOCKWASHER
3K-4708	[ 2]	ANCHOR
7H-3908	[ 4]	PIN
7H-3788	[ 2]	FORK
7H-3922	[ 2]	BAND ASSEM.
7H-3926	[ 2]	BAND ASSEM.
1D-4716	[ 16]	NUT
3B-4505	[ 16]	LOCKWASHER
1D-5117	[ 2]	NUT
3K-4724	[ 2]	SCREW
4K-6345	[ 2]	NUT
7B-5054	[ 32]	RIVET
5H-6030	[ 4]	LINING
3K-5802	[ 8]	BOLT
		(1/2 OF EACH IN EACH BAND ASSEM 7H3922)
5H-6030	[ 4]	LINING
7B-5054	[ 32]	RIVET
		1/2 OF EACH IN EACH BAND ASSEM. 7H3926)
6H-1298	[ 1]	SPRING
5K-0634	[ 1]	PIN
		(PART OF PAWL ASSEM. 5K627)
4K-5557	[ 1]	SUPPORT ASSEM.
9F-2978	[ 2]	NUT
		(PART OF SUPPORT ASSEM. 4K5557)
0S-1591	[ 2]	BOLT
3B-4506	[ 2]	LOCKWASHER
8S-9092	[ 2]	BOLT
1D-4720	[ 2]	NUT
4K-5268	[ 2]	SHAFT
3K-4723	[ 4]	KEY
5K-0627	[ 1]	PAWL ASSEM.
5K-0633	[ 1]	PIN
9S-1315	[ 2]	PIN
3B-4617	[ 2]	COTTER PIN
4K-5110	[ 1]	LEVER (RIGHT HAND)
4K-5622	[ 1]	LEVER (LEFT HAND)
0S-1585	[ 2]	BOLT
3K-4709	[ 1]	LEVER (RIGHT HAND)
3K-4710	[ 1]	LEVER (LEFT HAND)
1M-1794	[ 2]	BAND ASSEM.
5H-6030	[ 4]	LINING
7B-5054	[ 32]	RIVET
3K-5802	[ 8]	BOLT
		(1/2 OF EACH IN EACH BAND ASSEM 1M1794)
9H-4280	[ 2]	LINING GROUP
		EACH CONSISTING OF A COMPLETE SET OF LININGS AND RIVETS FOR ONE BRAKE.
4K-5213	[ 1]	PEDAL (RIGHT HAND)
4K-5214	[ 1]	PEDAL (LEFT HAND)
6K-3475	[ 1]	RATCHET
4H-4641	[ 1]	PIN
3B-4617	[ 1]	COTTER PIN
4K-5284	[ 2]	ROD ASSEM
4B-6493	[ 2]	SPRING
9S-1354	[ 2]	NUT
3B-4617	[ 2]	COTTER PIN
4K-5563	[ 2]	END
4K-5251	[ 2]	BRACKET
0S-1585	[ 6]	BOLT
3B-4508	[ 6]	LOCKWASHER
1K-2602	[ 2]	WASHER
3B-4629	[ 2]	COTTER PIN
1M-1917	[ 2]	SHAFT
6K-8088	[ 4]	BEARING

#UE0701180165

6K-5866: MAIN FRAME

MAIN FRAME

MAIN FRAME (6K5866 N/S)
Serial No. 82J1 to 82J3161 inclusive

c102709 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6K-7384	[1]	MAIN FRAME ASSEM.
		(LEFT HAND)
1F-0748	[1]	NUT (WELD)
4K-8433	[1]	STRIP
		(PARTS OF MAIN FRAME ASSEM. 6K7384)
6K-2960	[1]	BRACKET
1D-4593	[2]	BOLT
9H-1024	[2]	WASHER
1D-4609	[16]	BOLT
2J-3506	[16]	NUT
5H-1504	[32]	WASHER
6K-8743	[2]	SHIM (.120" THICK)
6K-8744	[2]	SHIM (.065" THICK)
6K-8745	[2]	SHIM (.035" THICK)
6K-2959	[1]	BRACKET
4K-8433	[1]	STRIP
1F-0748	[1]	NUT (WELD)
		(PARTS OF MAIN FRAME ASSEM. 6K7383)
6K-7383	[1]	MAIN FRAME ASSEM.
		(RIGHT HAND)
0S-1625	[4]	BOLT
9H-1024	[4]	WASHER
6K-8714	[2]	WASHER (.120" THICK)
6K-8716	[2]	WASHER (.065" THICK)
6K-8717	[2]	WASHER (.035" THICK)
0S-1625	[4]	BOLT
9H-1024	[4]	WASHER
1D-4612	[1]	BOLT
2J-3506	[1]	NUT
5H-1504	[2]	WASHER
1D-4612	[1]	BOLT
2J-3506	[1]	NUT
5H-1504	[2]	WASHER

#UE0701180166

6K-5866: MAIN FRAME

MAIN FRAME

MAIN FRAME (6K5866 N/S)
Serial No. 82J3162 to 82K3350 inclusive

c137478 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9K-0685 C	[1]	MAIN FRAME ASSEM.
		(LEFT HAND)
1F-0748	[1]	NUT (WELD)
4K-8433	[1]	STRIP
		(PARTS OF MAIN FRAME ASSEM. 9K685)
8K-7201 C	[1]	BRACKET
1D-4615 C	[2]	BOLT
7M-7875 C	[2]	WASHER
1D-4609	[16]	BOLT
2J-3506	[16]	NUT
5H-1504	[32]	WASHER
8K-8211 C	[2]	SHIM (.120" THICK)
8K-8210 C	[2]	SHIM (.065" THICK)
8K-8209 C	[2]	SHIM (.035" THICK)
8K-7200 C	[1]	BRACKET
4K-8433	[1]	STRIP
1F-0748	[1]	NUT (WELD)
		(PARTS OF MAIN FRAME ASSEM. 9K684)
9K-0684 C	[1]	MAIN FRAME ASSEM.
		(RIGHT HAND)
0S-1625	[4]	BOLT
9H-1024	[4]	WASHER
6K-8714	[2]	WASHER (.120" THICK)
6K-8716	[2]	WASHER (.065" THICK)
6K-8717	[2]	WASHER (.035" THICK)
0S-1625	[4]	BOLT
9H-1024	[4]	WASHER
1D-4612	[1]	BOLT
2J-3506	[1]	NUT
5H-1504	[2]	WASHER
1D-4612	[1]	BOLT
2J-3506	[1]	NUT
5H-1504	[2]	WASHER
C		INDICATES CHANGE

#UE0701180167

9K-8480: FRAME GP

FRAME GP

MAIN FRAME (9K8480 N/S)
Serial No. 82J3351-Up

c142703 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9K-8515	[1]	FRAME AS-MAIN (LH)
2.	1F-0748	[1]	NUT
3.	0S-1625	[4]	BOLT
	9H-1024	[4]	WASHER-HARD
4.	1D-4612	[1]	BOLT
	2J-3506	[1]	NUT-FULL
	5H-1504	[2]	WASHER-HARD
5.	8K-7201	[1]	BRACKET-LH
6.	1D-4615	[2]	BOLT
	7M-7875	[2]	WASHER-HARD
7.	1D-4610	[16]	BOLT
	2J-3506	[16]	NUT-FULL
	5H-1504	[32]	WASHER-HARD
8.	8K-8211 B	[2]	SHIM (.120IN THK)
			-OR-
	8K-8210 B	[2]	SHIM (.065IN THK)
			-OR-
	8K-8209 B	[2]	SHIM (.035IN THK)
9.	8K-7200	[1]	BRACKET-RH
10.	9K-8514	[1]	FRAME AS-MAIN (RH)
11.	1F-0748	[1]	NUT
12.	0S-1625	[4]	BOLT
	9H-1024	[4]	WASHER-HARD
13.	6K-8714	[2]	WASHER (3MM THK)
			-OR-
	6K-8716	[2]	WASHER-HARD (1.6MM THK)
			-OR-
	6K-8717	[2]	WASHER (1MM THK)
14.	1D-4612	[1]	BOLT
	2J-3506	[1]	NUT-FULL
	5H-1504	[2]	WASHER-HARD
	B		USE AS REQUIRED

#UE0701180168

9H-5827: FRONT IDLER GROUP

FRONT IDLER GROUP

9H5827 FRONT IDLER GROUP
Serial No. 82J1 to 82J1232 inclusive
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
Refer also to Page 99 for special parts

c121953 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-5369	[2]	SUPPORT
1M-1831	[2]	SCREW ASSEM.
3B-8488	[2]	FITTING
9H-7542	[2]	PILOT ASSEM
9H-7537	[2]	STUD
6H-7768	[2]	SPACER
1B-1067	[2]	WASHER
5K-1686	[2]	SEAT
1B-4210	[2]	NUT
0S-1595	[2]	BOLT
5K-2754	[2]	SPRING
1A-1135	[8]	BOLT
3B-4510	[8]	LOCKWASHER
1M-5391	[2]	STOP
		(Right Hand Outer-Left Hand Inner)
1M-5392	[2]	STOP
		(Right Hand Inner-Left Hand Outer)
9H-4105	[4]	DOWEL
4B-0897	[8]	PLATE
3F-8638	[8]	SPRING ASSEM.
9B-3488	[4]	PLATE ASSEM.
9B-3486	[8]	PIN
		(2 in each Plate Assem. 9B3488)
9B-2289	[8]	PIN
		(2 in each Bushing Assem. 1M4225)
1M-4227	[4]	BUSHING
		(1 in each Bushing Assem. 1M4225)
0S-1607	[2]	BOLT
1B-4207	[2]	NUT
7B-5494	[2]	LOCK
3B-4512	[2]	LOCKWASHER
0S-1588	[24]	BOLT
7B-9457	[12]	LOCK
5K-1492	[2]	IDLER
1M-9431	[4]	ARM
5B-0841	[8]	BOLT
3B-4510	[8]	LOCKWASHER
0S-1594	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0T-0772	[4]	BOLT
4K-9943	[4]	WASHER
5M-5000	[4]	LOCK
0S-1603	[16]	BOLT
3B-4508	[16]	LOCKWASHER
2S-1731	[2]	PLUG
4K-5285	[2]	BEARING
		(Right Hand Outer-Left Hand Inner)
4K-5286	[2]	BEARING
		(Right Hand Inner-Left Hand Outer)
	[2]	BOLT
1B-4207	[2]	NUT
7B-5494	[2]	LOCK
3B-4512	[2]	LOCKWASHER
1H-8128	[4]	SEAL (Standard)
		-or-
5K-1770	[4]	SEAL
		(High Temperature Application)
4K-3585	[32]	SHIM
1M-8869	[4]	PLATE
4K-9984	[2]	SHAFT
4F-7952	[4]	SEAL
2M-2858 R	[4]	SEAL GROUP
1M-3097	[8]	SEAL (Rubber)
		(2 in each Seal Group 2M2858)
1M-4225	[4]	BUSHING ASSEM.
R		REMFG PART MAY BE AVAILABLE

#UE0701180169

9H-5827: FRONT IDLER GROUP

FRONT IDLER GROUP

9H5827 FRONT IDLER GROUP
Serial No. 82J1233-Up
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
Refer also to Page 99 for special parts

c126428 UE070118

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-5369	[2]	SUPPORT
1M-1831	[2]	SCREW ASSEM.
3B-8488	[2]	FITTING
9H-7542	[2]	PILOT ASSEM.
9H-7537	[2]	STUD
6H-7768	[2]	SPACER
1B-1067	[2]	WASHER
5K-1686	[2]	SEAT
1B-4210	[2]	NUT
0S-1595	[2]	BOLT
5K-2754	[2]	SPRING
1A-1135	[8]	BOLT
3B-4510	[8]	LOCKWASHER
1M-5391	[2]	STOP
		(Right Hand Outer-Left Hand Inner)
1M-5392	[2]	STOP
		(Right Hand Inner-Left Hand Outer)
9H-4105	[4]	DOWEL
4B-0897	[8]	PLATE
3F-8638	[8]	SPRING ASSEM.
9B-3488	[4]	PLATE ASSEM.
9B-3486	[8]	PIN
		(2 in each Plate Assem. 9B3488)
9B-2289	[8]	PIN
		(2 in each Bushing Assem. 7K1102)
7K-1089	[4]	BUSHING
		(1 in each Bushing Assem. 7K1102)
0S-1607	[2]	BOLT
1B-4207	[2]	NUT
7B-5494	[2]	LOCK
3B-4512	[2]	LOCKWASHER
0S-1588	[24]	BOLT
7B-9457	[12]	LOCK
5K-1492	[2]	IDLER
1M-9431	[4]	ARM
5B-0841	[8]	BOLT
3B-4510	[8]	LOCKWASHER
0S-1594	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0T-0772	[4]	BOLT
4K-9943	[4]	WASHER
5M-5000	[4]	LOCK
0S-1603	[16]	BOLT
3B-4508	[16]	LOCKWASHER
2S-1731	[2]	PLUG
4K-5285	[2]	BEARING
		(Right Hand Outer-Left Hand Inner)
4K-5286	[2]	BEARING
		(Right Hand Inner-Left Hand Outer)
0L-1328	[2]	BOLT
1B-4207	[2]	NUT
7B-5494	[2]	LOCK
3B-4512	[2]	LOCKWASHER
1H-8128	[4]	SEAL (Standard)
		-or-
5K-1770	[4]	SEAL
		(High Temperature Application)
4K-3585	[32]	SHIM
1M-8869	[4]	PLATE
4K-9984	[2]	SHAFT
4F-7952	[4]	SEAL
2M-2858 R	[4]	SEAL GROUP
1M-3097	[8]	SEAL (Rubber)
		(2 in each Seal Group 2M2858)
7K-1102 C	[4]	BUSHING ASSEM.
C		INDICATES CHANGE FROM PREVIOUS
R		REMFG PART MAY BE AVAILABLE

Information:

POWER TRAIN

DRIVE GP-FINAL

Special Instruction

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}

Specifications

Bevel Pinion
D4D TRACTOR POWER TRAIN

Final Drive
D4D TRACTOR POWER TRAIN

Tool Operating Manual

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}

127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}

226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}

Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}

Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}

Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Disassembly and Assembly

Final Drive Cases, Gears, And Hubs
D4D TRACTOR POWER TRAIN

Final Drive Pinions And Flanges
D4D TRACTOR POWER TRAIN

Service Magazine

Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28

Stronger Final Drive Gear And Pinion Used{4055,4091}
1978/01/09

Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16

Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D4D :

6K-4665 FINAL DRIVE

4K-5027 BRAKES

6K-5866 MAIN FRAME

9K-8480 FRAME GP

9H-5827 FRONT IDLER GROUP

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch