CYLINDER BLOCK AND COVERS (7S1236 N/S)--Side View--Part 1 of 2 Serial No. 84J1204 and 84J1208 to 84J1289 inclusive Cylinder Block parts are shown on Page 20. See Page 22 for Gasket Kits D4D

BASIC ENGINE

CYLINDER BLOCK GP

0. 7S-1236 CYLINDER B
1. 7S-1236 CYLINDER B
2. 7S-1236 CYLINDER B
3. 7S-1236 CYLINDER B
4. 7S-1236 CYLINDER B
5. 7S-1236 CYLINDER B
6. 5S-6407 CYLINDER B
7. 2P-8774 CYLINDER B

CRANKSHAFT GP

8. 7S-5110 CRANKSHAFT
9. CRANKSHAFT
0. INFORMATION

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 84J
D4D TRACTOR--SPECIAL APPLICATION 84J00001-01524 (MACHINE) UE070121 D4D 84J (1968)

BASIC ENGINE

CYLINDER BLOCK GP

7S-1236 CYLINDER BLOCK AND COVERS

#UE0701210040

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Side View--Part 1 of 2
Serial No. 84J1204 and 84J1208 to 84J1289 inclusive
Cylinder Block parts are shown on Page 20. See Page 22 for Gasket Kits

c135817 UE070121

7S1236 CYLINDER BLOCK AND COVERS Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-5426	[1]	HOUSING (Flywheel)
2.	5M-6213	[4]	PLUG
3.	9H-5921	[1]	GASKET
4.	Y	[1]	BLOCK ASSEM.
			(See Separate Illustration)
5.	9S-6557	[4]	LINER
6.	5S-6670	[8]	SEAL
7.	8M-9307	[1]	PLUG
	6F-7062	[1]	GASKET
8.	7M-4593	[4]	PLUG
9.	0L-1351	[21]	BOLT
10.	3B-4506	[48]	LOCKWASHER
11.	5M-1903	[1]	COVER
12.	4M-2250	[1]	GASKET
13.	0S-1594	[8]	BOLT
14.	9S-2273	[1]	PLATE ASSEM.
	5S-7190	[1]	STUD
			(Part of 9S2273 Plate Assem.)
15.	5M-6214	[1]	PLUG
16.	5S-7134	[1]	GASKET
17.	5S-7135	[1]	GASKET
18.	2A-4639	[5]	BOLT
19.	8S-1963	[1]	GASKET
20.	9H-6067	[1]	SEAL
21.	8S-0499	[1]	TUBE ASSEM.
22.	9S-1799	[1]	COVER
	8S-0877	[1]	GASKET
23.	0S-1591	[12]	BOLT (1.25" Long)
	0L-1352	[2]	BOLT (1.125" Long)
24.	8S-1959	[1]	PLATE ASSEM.
25.	5S-6045	[1]	GASKET
26.	4F-4879	[1]	BOLT
	0L-0364	[1]	LOCK
27.	5B-5946	[1]	PLUG
	2B-5721	[1]	GASKET
28.	9S-1760	[1]	TUBE
29.	3B-8998	[2]	FITTING
	1F-1344	[2]	NUT
			(1 in each 3B8998 Fitting)
	Y		SEPARATE ILLUSTRATION

#UE0701210041

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Front View--Part 2 of 2
Serial No. 84J1204 and 84J1208 to 84J1289 inclusive

c135475 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-0633	[1]	SUPPORT ASSEM.
2.	7S-1234	[1]	BUSHING ASSEM.
3.	0L-1143	[9]	BOLT
4.	3B-4506	[25]	LOCKWASHER
5.	0S-1594	[8]	BOLT
6.	9S-3187	[1]	LOCK
7.	9H-4891	[1]	GASKET
8.	1B-4203	[6]	NUT
9.	2N-2753	[1]	COVER
10.	1C-2251	[2]	BOLT
11.	9S-8991	[1]	COVER ASSEM.
12.	0T-0101	[4]	STUD
13.	8S-6814	[2]	DOWEL
14.	3B-2460	[1]	STUD
			(Parts of 9S8991 Cover Assem.)
15.	5S-8055	[1]	GASKET
16.	1A-2029	[3]	BOLT
17.	7S-1803	[1]	CAP ASSEM.
18.	5S-8115	[1]	GAUGE ASSEM.
19.	5M-6213	[1]	PLUG
20.	4H-6112	[1]	BREATHER
21.	9S-3188	[1]	LOCK
22.	4M-4419	[1]	LOCK
23.	9S-1796	[1]	TUBE ASSEM.
24.	0S-1595	[4]	BOLT
	3B-4508	[4]	LOCKWASHER
25.	8S-1326	[1]	FITTING
26.	4B-7739	[1]	PLUG
27.	1A-1460	[13]	BOLT
28.	5M-9131	[1]	LOCK
29.	5M-9134	[1]	LOCK
30.	5M-9135	[1]	LOCK
31.	5M-9132	[1]	LOCK
32.	5M-9136	[1]	LOCK
33.	8S-6018	[1]	PAN
34.	1A-5964	[5]	BOLT
35.	1P-2698	[1]	PIPE
	7S-1801	[1]	ANCHOR

#UE0701210042

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Side View--Part 1 of 2
Serial No. 84J1290 to 84J1400, 84J1408, 84J1414 to 84J1418 and 84J1421 inclusive
Cylinder Block parts are shown on Page 20. See Page 22 for Gasket Kits

c135817 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-5426	[1]	HOUSING (Flywheel)
2.	5M-6213	[4]	PLUG
3.	9H-5921	[1]	GASKET
4.	Y	[1]	BLOCK ASSEM.
			(See Separate Illustration)
5.	9S-6557	[4]	LINER
6.	5S-6670	[8]	SEAL
7.	8M-9307	[1]	PLUG
	6F-7062	[1]	GASKET
8.	7M-4593	[4]	PLUG
9.	0L-1351	[21]	BOLT
10.	3B-4506	[48]	LOCKWASHER
11.	5M-1903	[1]	COVER
12.	4M-2250	[1]	GASKET
13.	0S-1594	[8]	BOLT
14.	9S-2273	[1]	PLATE ASSEM.
	5S-7190	[1]	STUD
			(Part of 9S2273 Plate Assem.)
15.	5M-6214	[1]	PLUG
16.	5S-7134	[1]	GASKET
17.	5S-7135	[1]	GASKET
18.	2A-4639	[5]	BOLT
19.	8S-1963	[1]	GASKET
20.	9H-6067	[1]	SEAL
21.	8S-0499	[1]	TUBE ASSEM.
22.	9S-1799	[1]	COVER
	8S-0877	[1]	GASKET
23.	0S-1591	[12]	BOLT (1.25" Long)
	0L-1352	[2]	BOLT (1.125" Long)
24.	8S-1959	[1]	PLATE ASSEM.
25.	5S-6045	[1]	GASKET
26.	4F-4879	[1]	BOLT
	0L-0364	[1]	LOCK
27.	5B-5946	[1]	PLUG
	2B-5721	[1]	GASKET
28.	9S-1760	[1]	TUBE
29.	3B-8998	[2]	FITTING
	1F-1344	[2]	NUT
			(1 in each 3B8998 Fitting)
	Y		SEPARATE ILLUSTRATION

#UE0701210043

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Front View--Part 2 of 2
Serial No. 84J1290 to 84J1400, 84J1408, 84J1414 to 84J1418 and 84J1421 inclusive

c137215 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-0633	[1]	SUPPORT ASSEM.
2.	7S-1234	[1]	BUSHING ASSEM.
3.	0L-1143	[9]	BOLT
4.	3B-4506	[25]	LOCKWASHER
5.	0S-1594	[8]	BOLT
6.	9S-3187	[1]	LOCK
7.	9H-4891	[1]	GASKET
8.	1B-4203	[6]	NUT
9.	2N-2753	[1]	COVER
10.	1C-2251	[2]	BOLT
11.	9S-8991	[1]	COVER ASSEM.
12.	0T-0101	[4]	STUD
13.	8S-6814	[2]	DOWEL
14.	3B-2460	[1]	STUD
15.	5S-8055	[1]	GASKET
16.	1A-2029	[3]	BOLT
17.	7S-1803	[1]	CAP ASSEM.
18.	5S-8115	[1]	GAUGE ASSEM.
19.	5M-6213	[1]	PLUG
20.	8S-5820 C	[1]	BREATHER
21.	9S-3188	[1]	LOCK
22.	4M-4419	[1]	LOCK
23.	9S-1796	[1]	TUBE ASSEM.
24.	0S-1595	[4]	BOLT
	3B-4508	[4]	LOCKWASHER
25.	8S-1326	[1]	FITTING
26.	4B-7739	[1]	PLUG
27.	1A-1460	[13]	BOLT
28.	5M-9131	[1]	LOCK
29.	5M-9134	[1]	LOCK
30.	5M-9135	[1]	LOCK
31.	5M-9132	[1]	LOCK
32.	5M-9136	[1]	LOCK
33.	8S-6018	[1]	PAN
34.	1A-5964	[5]	BOLT
35.	1P-2698	[1]	PIPE
	7S-1801	[1]	ANCHOR
	C		INDICATES CHANGE

#UE0701210044

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S)--Side View--Part 1 of 2
Serial No. 84J1401 to 84J1407, 84J1409 to 84J1413, 84J1419, 84J1420 and 84J1422-Up
2P8774 Cylinder Block parts are shown on Page 20A. See Page 22 for Gasket Kits

c141067 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-5426	[1]	HOUSING (Flywheel)
2.	5M-6213	[4]	PLUG
3.	9H-5921	[1]	GASKET
4.	2P-8774 RYC	[1]	BLOCK ASSEM.
			(Separate Illustration)
5.	2P-8889 C	[4]	LINER
6.	5S-6670 C	[12]	SEAL
7.	8M-9307	[1]	PLUG
	6F-7062	[1]	GASKET
8.	7M-4593	[4]	PLUG
9.	0L-1351	[21]	BOLT
10.	3B-4506 C	[29]	LOCKWASHER
11.	5M-1903	[1]	COVER
12.	4M-2250	[1]	GASKET
13.	0S-1594	[8]	BOLT
14.	9S-2273	[1]	PLATE ASSEM.
	5S-7190	[1]	STUD
15.	5M-6214	[1]	PLUG
16.	5S-7135	[1]	GASKET
17.	5S-7135	[1]	GASKET
18.	2A-4639	[5]	BOLT
19.	8S-1963	[1]	GASKET
20.	9H-6067	[1]	SEAL
21.	8S-0499	[1]	TUBE ASSEM.
22.	9S-1799	[1]	COVER
	8S-0877	[1]	GASKET
23.	0S-1591	[12]	BOLT (1.25" Long)
	0L-1352	[2]	BOLT (1.125" Long)
24.	8S-1959	[1]	PLATE ASSEM.
25.	5S-6045	[1]	GASKET
26.	4F-4879	[1]	BOLT
	0L-0364	[1]	LOCK
27.	5B-5946	[1]	PLUG
	2B-5721	[1]	GASKET
28.	9S-1760	[1]	TUBE
29.	3B-8998	[2]	FITTING
	1F-1344	[1]	NUT
30.	5M-2894 C	[19]	WASHER
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION
	C		INDICATES CHANGE

#UE0701210045

7S-1236: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S1236 N/S) -- Front View - Part 2 of 2
Serial No. 84J1401 to 84J1407, 84J1409 to 84J1413, 84J1419, 84J1420 and 84J1422-Up

c141068 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-0633	[1]	SUPPORT ASSEM.
2.	7S-1234	[1]	BUSHING ASSEM.
3.	0L-1143	[9]	BOLT
4.	3B-4506 C	[17]	LOCKWASHER
5.	0S-1594	[8]	BOLT
6.	9S-3187	[1]	LOCK
7.	9H-4891	[1]	GASKET
8.	1B-4203	[6]	NUT
9.	2N-2753	[1]	COVER
10.	1C-2251	[2]	BOLT
11.	9S-8991	[1]	COVER ASSEM.
12.	0T-0101	[4]	STUD
13.	8S-6814	[2]	DOWEL
14.	3B-2460	[1]	STUD
15.	5S-8055	[1]	GASKET
16.	1A-2029 C	[3]	BOLT
	4B-4278	[3]	WASHER
17.	7S-1803	[1]	CAP ASSEM.
18.	5S-8115	[1]	GAUGE ASSEM.
19.	5M-6213	[1]	PLUG
20.	8S-5820	[1]	BREATHER
21.	9S-3188	[1]	LOCK
22.	4M-4419	[1]	LOCK
23.	9S-1796	[1]	TUBE ASSEM.
24.	0S-1595	[4]	BOLT
	3B-4508	[4]	LOCKWASHER
25.	8S-1326	[1]	FITTING
26.	4B-7739	[1]	PLUG
27.	1A-1460	[13]	BOLT
28.	5M-9131	[1]	LOCK
29.	5M-9134	[1]	LOCK
30.	5M-9135	[1]	LOCK
31.	5M-9132	[1]	LOCK
32.	5M-9136	[1]	LOCK
33.	2P-2386 C	[1]	PAN
34.	1A-5964 C	[5]	BOLT
	5M-2894	[5]	WASHER
35.	1P-2698	[1]	PIPE
	7S-1801	[1]	ANCHOR
	C		INDICATES CHANGE

#UE0701210046

5S-6407: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (5S6407 N/S)
Serial No. 84J1 to 84J1400, 84J1408, 84J1414 to 84J1418 and 84J1421 inclusive
Part of Cylinder Block and Covers shown on Pages 18, 18B, 18D, 18F, 18H and 18K
Note: For Field Replacement order 8S3711 Service Block Assembly

c130130 UE070121

5S6407 CYLINDER BLOCK ASSEMBLY Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5M-6213	[1]	PLUG
2.	8B-1312	[2]	DOWEL
3.	5B-7652	[2]	DOWEL
4.	4B-5387	[3]	PLUG
5.	3S-8313	[2]	PLUG
6.	8B-6349	[2]	DOWEL
7.	5S-8462	[1]	STUD
8.	9M-5477	[1]	BEARING
9.	1H-0974	[1]	DOWEL
10.	8S-4676	[5]	CAP GROUP
	8S-4674	[10]	SHIM (Long)
			(2 in each 8S4676 Group)
	8S-4673	[30]	SHIM (Short)
			(6 in each 8S4676 Group)
			-or-
	1P-2717	[5]	BEARING CAP
11.	7S-3224	[10]	BOLT
12.	2S-5658	[10]	WASHER
13.	8S-0835	[1]	DOWEL
14.	5S-6420	[2]	BEARING
15.	4B-9782	[5]	BALL
16.	5S-6419	[4]	BEARING
17.	2A-3798	[2]	DOWEL
18.	7M-4046	[2]	BEARING

#UE0701210047

2P-8774: CYLINDER BLOCK AS

CYLINDER BLOCK AS

2P8774 CYLINDER BLOCK ASSEMBLY
Serial No. 84J1401 to 84J1407, 84J1409 to 84J1413, 84J1419, 84J1420 and 84J1422-Up
Part of Cylinder Block and Covers shown on Page 18M. Note: For Field Replacement order
2P8774 Plus 1--2P8783 Hardware Kit

c114501 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Qty	Parts name
1.	[1]	PLUG
2.	[2]	DOWEL
3.	[2]	DOWEL
4.	[3]	PLUG
5.	[2]	PLUG
6.	[2]	DOWEL
7.	[1]	STUD
8.	[1]	BEARING
9.	[1]	DOWEL
10.	[5]	BEARING CAP
11.	[10]	BOLT
12.	[10]	WASHER
13.	[1]	DOWEL
14.	[2]	BEARING
15.	[5]	BALL
16.	[4]	BEARING
17.	[2]	DOWEL
18.	[2]	BEARING

#UE0701210048

7S-5110: CRANKSHAFT GROUP

CRANKSHAFT GROUP

7S5110 CRANKSHAFT GROUP

c161412 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7S-3103	[1]	SEAL
		-OR-
7S-9736 C	[1]	SEAL ASSEM.
		(For Worn Journal)
2P-0716 C	[2]	PLATE
9F-2247	[4]	PLUG
		(Part of Crankshaft Assem. 5S5252)
3S-9730	[5]	BEARING
5S-5252	[1]	CRANKSHAFT ASSEM.
6B-5310	[1]	BOLT
5S-9948	[1]	WASHER
5S-9021	[1]	SEAL
4M-9933	[1]	GEAR (40 TEETH)
5H-2671	[1]	KEY
		(PARTS OF CRANKSHAFT ASSEM. 5S5252)
5S-8038	[1]	PULLEY
C		INDICATES CHANGE

#UE0701210049

CRANKSHAFT BEARING REPLACEMENT GROUP

UE0701210049 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			Complete set of Bearing Assemblies as shown WITH STANDARD CRANKSHAFT

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Special Instruction

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}

Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Specifications

Cylinder Block
3304 VEHICULAR ENGINE

Cylinder Liner
3304 VEHICULAR ENGINE

Cylinder Liner Projection
3304 VEHICULAR ENGINE

Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE

Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE

Tool Operating Manual

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Disassembly and Assembly

Cylinder Liners
D4 TRACTOR ENGINE

Crankshaft Main Bearings
D4 TRACTOR ENGINE

Camshaft Bearings
D4 TRACTOR ENGINE

Balancer Shaft Bearings
D4 TRACTOR ENGINE

Service Magazine

Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Pin Bore Is Now Offset (Not In The Center) .059" (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20

Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18

Caterpillar Parts SIS Catalog D4D :

7S-1236 CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS

7S-1236 CYLINDER BLOCK AND COVERS

5S-6407 CYLINDER BLOCK ASSEMBLY

2P-8774 CYLINDER BLOCK AS

7S-5110 CRANKSHAFT GROUP

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch