TRACK GROUPS--2 Required Serial No. 84J1 to 84J893 inclusive D4D TRACK-TYPE TRACTOR

UNDERCARRIAGE

TRACK GP

0. TRACK GROU
1. TRACK GROU
2. 1V-8134 RUBBER SHO
3. STREET PLA

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

4. 8F-9866 GREASE GUN
5. TOOLS
6. 8M-9852 TOOL GROUP
7. 9S-7977 TOOL GP-HA

CHARTS & FILMS

8. NAME PLATE
0. INFORMATION

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 84J
D4D TRACTOR--SPECIAL APPLICATION 84J00001-01524 (MACHINE) UE070121 D4D 84J (1968)

UNDERCARRIAGE

TRACK GP

4K-7193 TRACK GROUP

TRACK GROUPS

1V-8134 RUBBER SHOE PLATE SERVICE GROUP

STREET PLATES

#UE0701210360

TRACK GROUPS

TRACK GROUPS--2 Required
Serial No. 84J1 to 84J893 inclusive

c99299 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4K-7080	[1]	LINK ASSEM.
5K-9458	[34]	LINK
		(LEFT HAND)
5K-9457	[34]	LINK
		(RIGHT HAND)
4K-3916	[2]	SPACER
4K-3919	[1]	PIN (MASTER)
5K-2707	[140]	SEAL WASHER
4M-0740	[1]	BUSHING (MASTER)
5K-9460	[1]	LINK
		(MASTER-LEFT HAND)
5K-9459	[1]	LINK
		(MASTER-RIGHT HAND)
4K-3918	[34]	BUSHING
4B-6166	[34]	PIN
		NOTE: WHEN COMPLETE REPLACEMENT OF MASTER PIN IS REQUIRED YOU MAY ORDER MASTER PIN AND SPACER GROUP 4K4078 WHICH CONSISTS OF:
4K-3919	[1]	PIN (MASTER)
4K-3916	[2]	SPACER
5K-2707	[4]	SEAL WASHER

#UE0701210361

TRACK GROUPS

TRACK GROUPS--2 Required
Effective with Serial No. 84J894
FOR USE WITH LARGE OUTSIDE DIAMETER FRONT IDLER

c109350 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
	7K-2049	[1]	LINK ASSEM.
1.	7K-2019	[35]	BUSHING
2.	7K-1825	[35]	LINK (Right Hand)
3.	7K-2018	[144]	SEAL WASHER
4.	7K-1827	[1]	LINK (Master-Right Hand)
5.	4K-3919	[1]	PIN (Master)
6.	7K-2020	[1]	BUSHING (Master)
7.	7K-2016	[2]	SPACER
8.	4B-6166	[35]	PIN
9.	7K-1828	[1]	LINK (Master-Left Hand)
10.	7K-1826	[35]	LINK (Left Hand)
			NOTE: When complete replacement of Master Pin is required you may order 7K8452 PIN & SPACER GROUP WHICH CONSISTS OF:
	4K-3919	[1]	PIN (Master)
	7K-2016	[2]	SPACER
	7K-2018	[4]	SEAL WASHER

#UE0701210362

1V-8134: RUBBER SHOE PLATE SERVICE GROUP

RUBBER SHOE PLATE SERVICE GROUP

1V8134 RUBBER SHOE PLATE SERVICE GROUP--Field Installation
Serial No. 84J894-Up

c149107 UE070121

1V8134 RUBBER SHOE PLATE SERVICE GROUP Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8S-4762	[4]	BOLT (1.75 in. long)
	7K-2017	[4]	NUT
2.	1V-2913	[1]	PLATE

#UE0701210363

STREET PLATES

c101398 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3B-2242	[1]	PLATE
0S-1593	[2]	BOLT
3B-4508	[2]	LOCKWASHER
1B-4205	[2]	NUT
6B-1102		STREET PLATE GROUP CONSISTS OF 70 PLATES & HARDWARE
1M-7677		STREET PLATE GROUP CONSISTS OF 72 PLATES & HARDWARE
1M-7676		STREET PLATE GROUP CONSISTS OF 36 PLATES & HARDWARE
		(FOR ALTERNATE SHOES)

#UE0701210364

8F-9866: GREASE GUN AS

GREASE GUN AS

8F9866 GREASE GUN
Part of 8M9852 and 9S7977
Tool Group shown on Pages 96 & 97

c108355 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9F-2636	[1]	NOZZLE AS
2.	2M-2689	[1]	COUPLER AS
3.	9F-2638	[1]	HOSE AS
4.	9F-2637	[1]	NIPPLE

#UE0701210365

TOOLS

c99550 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	9F-3869		WRENCH
			(FRONT IDLER ADJ. BOLT)
	5S-9567		EXTENSION
	5S-9566		WRENCH
	5S-9569		SOCKET
			(DRAIN PLUG)
	5S-9568		SOCKET
			(DRAIN PLUG)

#UE0701210366

8M-9852: TOOL GROUP

TOOL GROUP

8M9852 TOOL GROUP
8F9866 Grease Gun parts are shown on Page 95
AN ATTACHMENT
Only separate parts serviced. When complete Group is required order 9S7977

c106609 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	1B-9660		GAUGE
			(VALVE CLEARANCE)
	9S-1309		PINCH BAR
	3B-1285		WRENCH
			(7/8" & 15/16" HEX.)
	9S-1375		WRENCH
			(15/16" & 1 1/8" HEX.)
	3B-9082		WRENCH
			(3/4" & 13/16" HEX.)
	5S-0276		WRENCH
	5B-0780		WRENCH 5/16" & 3/8" OPENING
	5B-0781		WRENCH 7/16" & 1/2" OPENING
	5B-0782		WRENCH 9/16" & 5/8" OPENING
	5B-0783		WRENCH 11/16" & 3/4" OPENING
	5B-0785		WRENCH 15/16" & 1" OPENING
	5B-0786		WRENCH 1 1/16" & 1 1/8" OPENING
	8F-9866 Y		GREASE GUN (LEVER)
			(SEE SEPARATE ILLUSTRATION)
	Y		SEPARATE ILLUSTRATION

#UE0701210367

9S-7977: TOOL GP-HAND

TOOL GP-HAND

9S7977 TOOL GROUP
8F9866 Grease Gun parts are shown on Page 95

c137810 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	9S-1738		SCREWDRIVER
			NO. 2 PHILLIPS
	1F-1157		SCREWDRIVER
	5S-9566		WRENCH
	5S-9567		EXTENSION
	8F-9866 Y		GREASE GUN (Lever)
			(See Separate Illustration)
	2P-8250		STRAP WRENCH ASSEM.
	5S-9568		SOCKET
	8H-8581		GAUGE
			(Feeler)
	5F-4764		PRY BAR
	5S-9569		SOCKET
	8H-8503		WRENCH (5/16" Opening)
	8H-8505		WRENCH (3/8" Opening)
	8H-8513		WRENCH (7/8" Opening)
	8H-8508		WRENCH (9/16" Opening)
	8H-8509		WRENCH (5/8" Opening)
	8H-8511		WRENCH (3/4" Opening)
	8H-8515		WRENCH (1" Opening)
	8H-8549		SOCKET (9/16" Opening)
	8H-8554		SOCKET (7/8" Opening)
	8H-8555		SOCKET (15/16" Opening)
	8H-8556		SOCKET (1" Opening)
	9S-1730		SOCKET (11/8" Opening)
	Y		SEPARATE ILLUSTRATION

#UE0701210368

NAME PLATES AND TRANSFERS

UE0701210368 UE070121

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5H-8450	[3]	PLATE TRACTOR NUMBER
		On transmission case, dash & left hand SIDE OF CYLINDER BLOCK
8S-3691	[1]	PLATE STARTING INSTRUCTIONS
		On top of instrument cover
8S-5512	[1]	PLATE LUBRICATION INSTRUCTIONS
		On top of battery box
1S-7680	[1]	FILM CRANKCASE OIL FILLER
		On Crankcase filler cap
4B-4158	[12]	DRIVE SCREW
7S-3186	[1]	TRANSFER GROUP
		On diesel air cleaner
		On air cleaner cover
		Even with filler and six inches to left
		On both sides of fuel tank
		On each side of fuel tank
8S-3942	[1]	TRANSFER CATERPILLAR
		On front of radiator
8S-4198	[1]	TRANSFER FILTER INSTRUCTIONS
		On oil filter cover
8S-8959	[1]	TRANSFER CATERPILLAR
		On back of fuel tank
6H-6000	[1]	FILM WARNING
		Below dash
8S-8297	[2]	FILM D4D
		On each side of fuel tank

Information:

UNDERCARRIAGE

TRACK GP

Special Instruction

Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}

Technical Information Bulletin

Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}

Specifications

Track
D4 (SA) TRACTOR POWER TRAIN

Track Roller Frame
D4 (SA) TRACTOR POWER TRAIN

Track Rollers
D4 (SA) TRACTOR POWER TRAIN

Track Carrier Roller
D4 (SA) TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Disassembly and Assembly

Track Carrier Rollers
D4D TRACTOR POWER TRAIN

Track Rollers
D4D TRACTOR POWER TRAIN

Tracks
D4D TRACTOR POWER TRAIN

Hydraulic Track Adjusters
D4D TRACTOR POWER TRAIN

Track Roller Frames
D4D TRACTOR POWER TRAIN

Aligment Of Track Roller Frames
D4D TRACTOR POWER TRAIN

Service Magazine

6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/11/30

Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18

Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}

Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Caterpillar Parts SIS Catalog D4D :

TRACK GROUPS

6K-5773 FENDER GROUP

9K-8641 EXTENDED FENDER GROUP

9K-8642 EXTENDED FENDER GROUP

9K-4905 EXTENDED FENDER GROUP

9K-2937 EXTENDED FENDER GROUP

9K-2362 EXTENDED FENDER GROUP

7K-7245 EXTENDED FENDER GROUP

TRACK GROUPS

1V-8134 RUBBER SHOE PLATE SERVICE GROUP

STREET PLATES

8F-9866 GREASE GUN AS

TOOLS

8M-9852 TOOL GROUP

9S-7977 TOOL GP-HAND

NAME PLATES AND TRANSFERS

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch