AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (5S3394 N/S) - Side View - Part 1 of 2 Serial No. 81J1543, 81J1545 to 81J1549, 81J1551 to 81J1570, 81J1572 to 81J2378 and 81J2381 inclusive and 31K718 to 31K819 inclusive. 5S6407 Cylinder Block parts are shown on Page 26. See Page 28 for Gasket Kits 950


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K00001-00942 (MACHINE) UE070123 950 31K   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
 

#UE0701230030
 

5S-3394: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S3394 N/S) - Side View - Part 1 of 2
Serial No. 81J1543, 81J1545 to 81J1549, 81J1551 to 81J1570, 81J1572 to 81J2378 and 81J2381 inclusive and
31K718 to 31K819 inclusive. 5S6407 Cylinder Block parts are shown on Page 26. See Page 28 for Gasket Kits
c135690 UE070123
5S3394 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6557 [4] LINER  
2. 5S-6670 [8] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [19] BOLT  
5. 3B-4506 [58] LOCKWASHER  
6. 8M-3023 [1] ORIFICE  
7. 9H-5921 [1] GASKET  
8. 5S-6407 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [6] BOLT  
12. 5M-6214 [1] PLUG  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 8S-8234 [1] PAN ASSEM.  
17. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
18. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 1A-2029 [6] BOLT  
23. 5S-6045 [1] GASKET  
24. 8S-1959 [1] PLATE ASSEM.  
25. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
26. 7S-0566 [1] HOUSING (Flywheel)  
27. 5M-6213 [4] PLUG  
28. 9S-1760 [1] TUBE  
29. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
  Y   SEPARATE ILLUSTRATION
 

#UE0701230031
 

5S-3394: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S3394 N/S) - End View - Part 2 of 2
Serial No. 81J1543, 81J1545 to 81J1549, 81J1551 to 81J1570, 81J1572 to 81J2378 and 81J2381 inclusive and
31K718 to 31K819 inclusive. Refer also to Page 147 for special parts
c125515 UE070123
5S3394 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 C [10] BOLT  
2. 9S-3187 C [1] LOCK  
3. 9S-3188 C [1] LOCK  
4. 7M-0232 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 C [13] LOCKWASHER  
8. 5S-6385 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 6H-0192 [4] STUD  
    (Parts of 5S6385 Cover Assem.)
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 C [1] LOCK  
19. 1A-2029 [3] BOLT  
20. 7S-1776 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 C [4] BOLT  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 C [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 C [6] LOCKWASHER  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UE0701230032
 

5S-3394: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S3394 N/S) - Side View - Part 1 of 2
Serial No. 81J2379, 81J2380 & 81J2382 to 81J2790 inclusive & 31K820 to 31K867 inclusive
5S6407 Cylinder Block parts are shown on Page 26. Note: 8S4635 Piston & Liner Group,
consisting of: 1 - Piston Assembly, 1 - Liner and 2 - Seal, is available. See Page 28 for Gasket Kits
c135691 UE070123
5S3394 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6557 [4] LINER  
2. 5S-6670 [8] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [19] BOLT  
5. 3B-4506 [58] LOCKWASHER  
6. 8M-3023 [1] ORIFICE  
7. 9H-5921 [1] GASKET  
8. 5S-6407 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
    (Part of 9S2273 Plate Assem.)
10. 5S-7134 [1] GASKET  
11. 0S-1594 [6] BOLT  
12. 5M-6214 [1] PLUG  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 8S-8234 [1] PAN ASSEM.  
17. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
18. 9S-7039 [1] COVER ASSEM.  
  8S-0877 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 1A-2029 [6] BOLT  
23. 5S-6045 [1] GASKET  
24. 8S-1959 [1] PLATE ASSEM.  
25. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
26. 7S-0566 [1] HOUSING (Flywheel)  
27. 3B-8998 [1] FITTING  
28. 1F-1344 [2] NUT  
    (1 in each 3B8998 & 3B9003 Fitting)
29. 3B-9003 [1] FITTING  
30. 5M-6213 [4] PLUG  
31. 9S-7037 [1] TUBE  
  Y   SEPARATE ILLUSTRATION
 

#UE0701230033
 

5S-3394: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S3394 N/S) - End View - Part 2 of 2
Serial No. 81J2379, 81J2380 & 81J2382 to 81J2790 inclusive & 31K820 to 31K867 inclusive
Refer also to Page 147 for special parts
c128899 UE070123
5S3394 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [10] BOLT  
2. 9S-3187 [1] LOCK  
3. 9S-3188 [1] LOCK  
4. 7M-0232 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [13] LOCKWASHER  
8. 5S-6385 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 6H-0192 [4] STUD  
    (Parts of 5S6385 Cover Assem.)
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [1] LOCK  
19. 1A-2029 [3] BOLT  
20. 7S-1776 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [6] LOCKWASHER  
 

#UE0701230034
 

5S-3394: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S3394 N/S) - Side View - Part 1 of 2
Serial No. 81J2791 - Up and 31K868 - Up
5S6407 Cylinder Block parts are shown on Page 26. See Page 28 for Gasket Kits
c135692 UE070123
5S3394 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-6557 [4] LINER  
2. 5S-6670 [8] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [19] BOLT  
5. 3B-4506 [58] LOCKWASHER  
6. 8M-3023 [1] ORIFICE  
7. 9H-5921 [1] GASKET  
8. 5S-6407 Y [1] BLOCK ASSEM.  
    (See Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
    (Part of 9S2273 Plate Assem.)
10. 5S-7134 [1] GASKET  
11. 0S-1594 [6] BOLT  
12. 5M-6214 [1] PLUG  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 8S-8234 [1] PAN ASSEM.  
17. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
18. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 1A-2029 [6] BOLT  
23. 5S-6045 [1] GASKET  
24. 8S-1959 [1] PLATE ASSEM.  
25. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
26. 7S-0566 [1] HOUSING (Flywheel)  
27. 3B-8998 [2] FITTING  
28. 1F-1344 [2] NUT  
    (1 in each 3B8998 Fitting)
29. 5M-6213 [4] PLUG  
30. 9S-1760 [1] TUBE  
  Y   SEPARATE ILLUSTRATION
 

#UE0701230035
 

5S-3394: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S3394 N/S) - End View - Part 2 of 2
Serial No. 81J2791-Up and 31K868-Up
Refer also to Page 147 for special parts
c128899 UE070123
5S3394 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [10] BOLT  
2. 9S-3187 [1] LOCK  
3. 9S-3188 [1] LOCK  
4. 7M-0232 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [13] LOCKWASHER  
8. 5S-6385 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 6H-0192 [4] STUD  
    (Parts of 5S6385 Cover Assem.)
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [1] LOCK  
19. 1A-2029 [3] BOLT  
20. 7S-1776 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [6] LOCKWASHER  
 

#UE0701230036
 

5S-6407: CYLINDER BLOCK ASSEMBLY

5S6407 CYLINDER BLOCK ASSEMBLY
Part of Cylinder Block and Covers shown on Pages 24, 24B, 24D, 24F, 24H and 24K
Note: For Field Replacement of Block Assembly order 5S6407 plus 1-9S5602 Hardware Kit
c130130 UE070123
5S6407 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1H-0974 [1] DOWEL  
10. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Group)
    -or-
  1P-2717 [5] BEARING CAP  
11. 7S-3224 [10] BOLT  
12. 2S-5658 [10] WASHER  
13. 8S-0835 [1] DOWEL  
14. 5S-6420 [2] BEARING  
15. 4B-9782 [5] BALL  
16. 5S-6419 [4] BEARING  
17. 2A-3798 [2] DOWEL  
18. 7M-4046 [2] BEARING  
 

#UE0701230037
 

5S-6431: CRANKSHAFT

CRANKSHAFT (5S6431 N/S)
c114220 UE070123
5S6431 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-9730 [5] BEARING  
  2P-0716 [2] PLATE  
  9F-2247 [4] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5S5252)
  5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (WITH SLEEVE FOR WORN FLANGE)
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
 

#UE0701230038
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UE0701230038 UE070123
None CRANKSHAFT BEARING REPLACEMENT GROUPS Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UE0701230039
 

GASKET KITS

GASKET KITS
UE0701230039 UE070123
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-9686 DIESEL ENGINE BASIC  
  8S-9693 DIESEL ENGINE SUPPLEMENTARY  
  8S-9698 VALVE GRINDING  
  8S-7057 WATER PUMP  
  9S-1059 TRANSMISSION  
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING SEAL KITS THAT ARE INCLUDED WITH THE CLASSIC LINER KITS
Disassembly and Assembly
Crankshaft Main Bearings
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Spacer Plate
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Cylinder Liners (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Cylinder Liners (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Camshaft Bearings
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18
Improved Seal Kits for Cylinder Liner Kits {1216}
2005/11/14

Caterpillar Parts SIS Catalog 950 :

CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER HEAD AND VALVE MECHANISM
5S-8529 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-8529 CYLINDER HEAD AND VALVE MECHANISM
SERVICE METER
SERVICE METER
SERVICE METER
SERVICE METER
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-3394 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CRANKSHAFT
5S-6431 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.