ELECTRICAL AND STARTING SYSTEM
WIRING GPBATTERY GP
SWITCH GP
LIGHTING GP
SWITCH GP
LIGHTING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP#UE0701230100
6K-5950: ENGINE WIRING
ENGINE WIRING (6K5950 N/S)
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6K-7754 | [1] | BOX | |
2. | 0L-1351 | [2] | BOLT | |
3. | 3B-4506 | [3] | LOCKWASHER | |
4. | 6K-5272 | [1] | HARNESS ASSEM. | |
5. | 3M-6547 | [1] | SHELL | |
6. | 3M-6533 | [1] | WASHER | |
7. | 3M-6018 | [1] | TERMINAL | |
8. | 6K-7361 | [1] | DISCONNECT | |
9. | 6K-7360 | [1] | DISCONNECT | |
10. | 6K-5182 | [1] | GROMMET | |
11. | 6B-2864 | [1] | TERMINAL | |
12. | 6H-6756 | [2] | TERMINAL | |
13. | 6K-5125 | [1] | TERMINAL | |
14. | 4K-6494 | [1] | TERMINAL | |
(Parts of 6K5272 Harness Assem.) | ||||
15. | 0T-0102 | [1] | BOLT | |
16. | 4D-9164 | [2] | CLIP | |
17. | 6K-5210 | [1] | BRACKET ASSEM. | |
18. | 9F-6445 | [2] | NUT | |
(Part of 6K5210 Bracket Assem.) | ||||
19. | 1B-4330 | [2] | NUT | |
20. | 3B-4504 | [2] | LOCKWASHER | |
21. | 4B-4278 | [2] | WASHER | |
22. | 6K-7753 | [1] | GROMMET |
#UE0701230101
6K-6470: WIRING HARNESS ASSEMBLY
6K6470 WIRING HARNESS ASSEMBLY
Part of Battery and Wiring shown on Page 50
Part of Battery and Wiring shown on Page 50
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
[1] | TERMINAL (Marked A) | |||
[6] | TERMINAL (Marked B) | |||
[2] | TERMINAL (Marked C) | |||
[1] | TERMINAL (Marked D) | |||
[4] | TERMINAL (Marked E) | |||
[2] | TERMINAL (Marked F) | |||
[6] | TERMINAL (Marked G) | |||
[4] | TERMINAL (Marked H) | |||
[1] | CLASP (Marked J) | |||
[11] | INSULATOR (Marked K) | |||
[2] | INSULATOR (Marked M) | |||
[5] | INSULATOR (Marked O) | |||
[2] | INSULATOR (Marked P) | |||
[1] | INSULATOR (Marked R) |
#UE0701230102
6K-5340: BATTERY AND WIRING
BATTERY AND WIRING (6K5340 N/S) - 24 Volt - As Viewed from Right Hand Side of Machine - Part 1 of 2
6K6470 Harness, 3K1650 Switch and 1M3387 Lamp parts are shown on Pages 49, 52
and 53
See Page 50B for Wiring Diagram. Refer also to Page 131 for special parts
6K6470 Harness, 3K1650 Switch and 1M3387 Lamp parts are shown on Pages 49, 52
and 53
See Page 50B for Wiring Diagram. Refer also to Page 131 for special parts
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
7F-6429 | [1] | AMMETER | ||
4K-8029 | [1] | HOLDER | ||
8M-8948 | [1] | FUSE | ||
1M-3387 Y | [2] | LAMP ASSEM. (Dash) | ||
(See Separate Illustration) | ||||
4B-1221 | [2] | MACHINE SCREW | ||
4B-2043 | [2] | NUT | ||
3B-4501 | [2] | LOCKWASHER | ||
4K-5124 | [1] | CIRCUIT BREAKER (Auto.) | ||
8S-7713 | [1] | SWITCH ASSEM. | ||
8F-3437 | [1] | LEVER | ||
5L-7200 | [1] | SCREW | ||
3B-4501 | [1] | LOCKWASHER | ||
(Instructions for installing Switch) | ||||
(Parts of 8S7713 Assem.) | ||||
6K-6392 | [1] | FITTING | ||
6K-6377 | [1] | PLATE | ||
6K-6381 | [1] | BOX | ||
5K-3430 | [2] | STUD | ||
1B-4330 | [4] | NUT | ||
3B-4504 | [2] | LOCKWASHER | ||
4K-5588 | [1] | GROMMET | ||
4K-6502 | [1] | FITTING | ||
6K-6391 | [1] | HOSE | ||
4K-5253 | [2] | SLEEVE | ||
4D-6466 | [3] | CLIP | ||
6K-6470 Y | [1] | HARNESS ASSEM. | ||
(See Separate Illustration) | ||||
4K-8030 | [2] | CLIP | ||
4K-5122 | [3] | HOLDER | ||
8M-8948 | [3] | FUSE | ||
6K-6362 | [1] | INLAY | ||
5M-6668 | [2] | MACHINE SCREW | ||
3H-4105 | [1] | CIRCUIT BREAKER (Manual) | ||
3K-1650 Y | [1] | SWITCH ASSEM. (Light) | ||
(See Separate Illustration) | ||||
2M-6497 | [1] | REGULATOR | ||
The following Repair Kit is available: | ||||
8M-3146 | [1] | KIT (Shockmount) | ||
(Includes Brackets, Grommets, Lead Assem. and Hardware) | ||||
1B-4330 | [4] | NUT | ||
3B-4504 | [4] | LOCKWASHER | ||
5S-8405 | [12] | PLUG | ||
(3 in each 5S7219 Battery) | ||||
5S-7219 | [4] | BATTERY | ||
4K-3088 | [4] | MAT | ||
5K-2216 | [1] | TUBE | ||
4K-8379 | [1] | GROMMET | ||
2L-2685 | [2] | CLIP | ||
1D-4717 | [2] | NUT | ||
3B-4506 | [2] | LOCKWASHER | ||
4K-8431 | [2] | SLEEVE | ||
3S-2093 | [1] | TIE | ||
4B-9302 | [1] | CLIP | ||
5B-1344 | [1] | GROMMET | ||
5F-5467 | [9] | CLIP | ||
1D-4717 | [10] | NUT | ||
3B-4506 | [10] | LOCKWASHER | ||
0S-0509 | [1] | BOLT | ||
3B-4506 | [1] | LOCKWASHER | ||
Y | SEPARATE ILLUSTRATION |
#UE0701230103
6K-5340: BATTERY AND WIRING
BATTERY AND WIRING (6K5340 N/S)--24 Volt--Top View--Part 2 of 2
7H7290 Switch parts are shown on Page 53. See Page 50B for Wiring Diagram
7H7290 Switch parts are shown on Page 53. See Page 50B for Wiring Diagram
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4D-4554 | [1] | CABLE ASSEM. | ||
(Battery to Starting Motor Solenoid) | ||||
6K-5337 | [1] | HARNESS ASSEM. | ||
4K-6066 | [2] | CLIP | ||
0S-0509 | [2] | BOLT | ||
3B-4506 | [2] | LOCKWASHER | ||
2M-0912 | [1] | TERMINAL | ||
(Part of Cable Assem. 4D4554) | ||||
2M-0912 | [1] | TERMINAL | ||
(Part of Cable Assem. 8M5264) | ||||
8M-5264 | [1] | CABLE ASSEM. | ||
(Starting Motor Ground to Disconnect Switch) | ||||
1B-2713 | [2] | BOLT | ||
3B-4504 | [2] | LOCKWASHER | ||
4K-8046 | [1] | COVER | ||
4K-6501 | [2] | GROMMET | ||
6D-3479 | [3] | CLIP | ||
0L-1351 | [2] | BOLT | ||
3B-4506 | [2] | LOCKWASHER | ||
5B-9627 | [2] | WASHER | ||
0S-0550 | [2] | CLIP | ||
6K-3798 | [1] | PLATE ASSEM. | ||
4H-3283 | [5] | BOLT | ||
3B-4506 | [5] | LOCKWASHER | ||
4B-4278 | [5] | WASHER | ||
6H-1717 | [4] | BOLT | ||
3B-4508 | [4] | LOCKWASHER | ||
4B-4280 | [4] | WASHER | ||
4B-9233 | [1] | CLIP | ||
4S-1936 | [2] | CLIP | ||
3D-2098 | [1] | TERMINAL | ||
(Part of 4D4554 Assem.) | ||||
2D-8788 | [1] | BOLT | ||
2D-8787 | [1] | NUT | ||
(Parts of 3D2098 Assem.) | ||||
3K-1717 | [1] | CABLE ASSEM. | ||
3D-2098 | [1] | TERMINAL ASSEM. | ||
(Part of 5K2158 Assem.) | ||||
2D-8788 | [1] | BOLT | ||
2D-8787 | [1] | NUT | ||
(Parts of 3D2098 Assem.) | ||||
5K-2158 | [1] | CABLE ASSEM. | ||
2M-0913 | [1] | TERMINAL | ||
(Part of Cable Assem. 5K2158) | ||||
7B-4448 | [1] | SWITCH | ||
(Hydraulic Pressure) | ||||
2M-0913 | [1] | TERMINAL | ||
(Part of Cable Assem. 8M5264) | ||||
7H-7290 Y | [1] | SWITCH ASSEM. | ||
(See Separate Illustration) | ||||
8H-8648 | [1] | PLATE | ||
0L-1351 | [1] | BOLT | ||
3B-4506 | [1] | LOCKWASHER | ||
5K-2161 | [1] | BRACKET | ||
5M-9205 | [2] | TERMINAL (-) | ||
(1 in each Cable Assem. 3K1717) | ||||
3K-1717 | [1] | CABLE ASSEM. | ||
5M-9204 | [2] | TERMINAL (+) | ||
(1 in each Cable Assem. 3K1717) | ||||
4K-7064 | [1] | FRAME ASSEM. | ||
4K-5803 | [2] | TIE | ||
3K-8761 | [1] | CABLE ASSEM. | ||
3D-2098 | [2] | TERMINAL ASSEM. | ||
(Parts of 3K8761 Assem.) | ||||
2D-8788 | [2] | BOLT | ||
2D-8787 | [2] | NUT | ||
(1 each in each 3D2098 Assem.) | ||||
1M-6119 | [4] | BOLT | ||
1M-6120 | [4] | NUT | ||
(1 of each in each Terminal Assem. 5M9205 and 5M9204) | ||||
8M-9426 | [2] | BEARING | ||
9F-2978 | [12] | NUT (Weld) | ||
(Parts of Plate Assem. 6K3798) | ||||
Y | SEPARATE ILLUSTRATION |
#UE0701230104
WIRING DIAGRAM
WIRING DIAGRAM--24 Volt System
#UE0701230105
3K-1650: SWITCH AS-LIGHT
3K1650 SWITCH ASSEMBLY
Part of Battery and Wiring shown on Pages 50 & 50D
Part of Battery and Wiring shown on Pages 50 & 50D
#UE0701230106
1M-3387: LAMP GP
1M3387 DASH LAMP ASSEMBLY--24 Volt
Part of Battery and Wiring shown on Pages 50, 50D and 50H
Part of Battery and Wiring shown on Pages 50, 50D and 50H
#UE0701230107
7H-7290: SWITCH AS-DISCONNECT
7H7290 DISCONNECT SWITCH ASSEMBLY
Part of Battery and Wiring shown on Pages 50A, 50E and 50J
Part of Battery and Wiring shown on Pages 50A, 50E and 50J
#UE0701230108
FRONT LIGHTING SYSTEM
FRONT LIGHTING SYSTEM--24 VOLT
4K8033 LAMP PARTS ARE SHOWN ON PAGE 56
4K8033 LAMP PARTS ARE SHOWN ON PAGE 56
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
2B-8352 | [2] | WASHER | ||
2K-8944 | [2] | BRACKET | ||
5D-3183 | [2] | NUT | ||
5D-3184 | [2] | LOCKWASHER | ||
4K-8045 | [2] | COUPLER | ||
4K-8044 | [2] | TERMINAL | ||
(PART OF WIRE ASSEM. 4K8510) | ||||
4K-8036 | [2] | INSULATOR | ||
4K-8510 | [1] | WIRE ASSEM. | ||
4K-7749 | [1] | SLEEVE | ||
1H-6249 | [1] | CLASP | ||
(PARTS OF WIRE ASSEM. 4K8510) | ||||
4K-8540 | [2] | NUT | ||
2H-3923 | [2] | LOCKWASHER | ||
4K-8028 | [2] | CONNECTOR | ||
4K-8430 | [1] | HOSE | ||
4K-8406 | [1] | BRACKET | ||
0S-0509 | [1] | BOLT | ||
3B-4506 | [1] | LOCKWASHER | ||
4K-8405 | [1] | SLEEVE | ||
(RIGHT HAND) | ||||
4K-8300 | [1] | SLEEVE | ||
(LEFT HAND) | ||||
(PARTS OF WIRE ASSEM. 4K8510) | ||||
4K-8033 Y | [2] | LAMP ASSEM. | ||
(SEE SEPARATE ILLUSTRATION) | ||||
1H-5165 | [2] | CLIP | ||
0S-1621 | [2] | BOLT | ||
3B-4508 | [2] | LOCKWASHER | ||
3K-1787 | [2] | GROMMET | ||
4B-9302 | [2] | CLIP | ||
1D-4717 | [2] | NUT | ||
3B-4506 | [2] | LOCKWASHER | ||
5K-2217 | [1] | TUBE | ||
Y | SEPARATE ILLUSTRATION |
#UE0701230109
6K-6439: REAR LIGHTING SYSTEM
REAR LIGHTING SYSTEM (6K6439 N/S)--24 Volt
Serial No. 81J1 to 81J2718 and 81J2723 to 81J2814 inclusive and 31K1 to 31K868 inclusive
4K8033 Lamp and 7M7147 Stop and Tail Lamp parts are shown on Page 56
Serial No. 81J1 to 81J2718 and 81J2723 to 81J2814 inclusive and 31K1 to 31K868 inclusive
4K8033 Lamp and 7M7147 Stop and Tail Lamp parts are shown on Page 56
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4S-8758 | [2] | FEET TUBE | ||
9F-5509 | [1] | INSULATOR | ||
(PARTS OF HARNESS ASSEM. 6K6438) | ||||
4K-8033 Y | [2] | FLOOD LAMP ASSEM. | ||
(SEE SEPARATE ILLUSTRATION) | ||||
4D-4512 | [2] | BRACKET | ||
4K-8044 | [2] | TERMINAL (FLOOD LAMP) | ||
(DARK BLUE WIRE) | ||||
(PART OF HARNESS ASSEM. 6K6438) | ||||
0L-1351 | [4] | BOLT | ||
3B-4506 | [15] | LOCKWASHER | ||
2D-8759 | [4] | TERMINAL | ||
(TAIL LAMP - YELLOW WIRE) | ||||
(STOP LAMP - TAN WIRE) | ||||
(PART OF HARNESS ASSEM. 6K6438) | ||||
7M-7147 Y | [2] | TAIL LAMP ASSEM. | ||
(SEE SEPARATE ILLUSTRATION) | ||||
0S-1588 | [8] | BOLT | ||
6H-4006 | [2] | GROMMET | ||
4K-8045 | [2] | COUPLER | ||
2B-8352 | [2] | WASHER | ||
5D-3183 | [2] | NUT | ||
5D-3184 | [2] | LOCKWASHER | ||
6K-6438 | [1] | HARNESS ASSEM. | ||
0S-0509 | [3] | BOLT | ||
8F-2395 | [3] | CLIP | ||
4K-8036 | [2] | INSULATOR | ||
4K-8038 | [2] | STUD ASSEM. | ||
3D-7854 | [4] | SPACER | ||
1B-4206 | [2] | NUT | ||
6F-0253 | [2] | LOCKWASHER | ||
4D-4511 | [2] | GUARD | ||
4K-8039 | [2] | BRACKET | ||
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into
Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}