ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPALTERNATOR GP-CHARGING
OPERATOR STATION
CAB GPELECTRICAL AND STARTING SYSTEM
LIGHTING GPOPERATOR STATION
CAB GPELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#UE0701230290
2P-6162: ELECTRIC STARTING MOTOR GROUP
2P6162 ELECTRIC STARTING MOTOR GROUP--Prestolite--24 Volt--Part 2 of 2
Part of 7S3622 Starting Motor Group shown on Page 130A
Only separate parts serviced. When complete Group is required order 4N3181
Part of 7S3622 Starting Motor Group shown on Page 130A
Only separate parts serviced. When complete Group is required order 4N3181
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-8822 | [1] | PLATE ASSEM. | |
| 2. | 2P-8815 | [1] | KIT (Includes 8 Brushes) | |
| 2P-8868 | [1] | KIT (Includes 8 Springs) | ||
| 3. | 2P-8825 | [1] | SHIFT YOKE ASSEM. | |
| 4. | 2P-8817 | [1] | KIT (Yoke Adjusting) | |
| (Includes Plugs, Pin, Gasket & Nut) | ||||
| 5. | 8S-1535 | [1] | KIT (Includes 6 Plugs) | |
| 6. | 8S-1571 | [6] | SCREW | |
| 7. | 8S-4684 | [1] | KIT (Bearing & Wick) | |
| 8. | 8S-1543 | [1] | HOUSING ASSEM. (Pinion) | |
| 9. | 2B-4602 | [1] | PLUG | |
| 10. | 8S-4680 | [1] | KIT (Includes 10 Seals) | |
| 11. | 8S-1541 | [1] | POSITORK DRIVE ASSEM. | |
| 12. | 2H-3931 | [1] | SEAL | |
| 13. | 2P-8824 | [1] | HOUSING ASSEM. | |
| 2B-4602 | [1] | PLUG | ||
| 14. | 8S-2226 | [1] | BUSHING | |
| 15. | 8S-2225 | [1] | SEAL | |
| 16. | 0L-1340 | [7] | SCREW | |
| 2P-8816 | [1] | KIT (Includes Housing Screws) | ||
| 17. | 3B-4504 | [7] | LOCKWASHER | |
| 18. | 4M-0189 | [1] | SEAL | |
| 19. | 2P-8818 | [1] | KIT (Field Coil) | |
| (Includes Coils, Gaskets & Screws) | ||||
| 20. | 8S-1546 | [1] | ARMATURE ASSEM. | |
| 8S-8075 | [1] | KIT (Armature Thrust Washers) | ||
| 21. | 8S-2222 | [1] | KIT (Includes 10 Insulations) | |
#UE0701230291
4M-9102: GENERATOR ASSEMBLY
4M9102 GENERATOR ASSEMBLY--24 Volt, 20 Ampere
Part of 7S9782 Generator Group shown on Page 130
Part of 7S9782 Generator Group shown on Page 130
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2F-2860 | [8] | SCREW | ||
| 3B-4501 | [8] | LOCKWASHER | ||
| 7F-7615 | [4] | SCREW | ||
| 7F-7622 | [4] | NUT | ||
| 5M-3250 | [2] | BRUSH ASSEM. | ||
| 4B-1311 | [2] | SCREW | ||
| 3B-4502 | [2] | LOCKWASHER | ||
| 5M-3252 | [1] | HOLDER ASSEM. | ||
| (GROUNDED) | ||||
| 5M-3251 | [1] | HOLDER ASSEM. | ||
| (INSULATED) | ||||
| 1S-7905 | [1] | CLAMP | ||
| 5M-3114 | [1] | BEARING | ||
| 7F-7611 | [4] | SCREW | ||
| 3B-4502 | [4] | LOCKWASHER | ||
| 5M-3106 | [1] | PLATE ASSEM. | ||
| 5M-3107 | [1] | GASKET | ||
| 5H-2532 | [1] | KEY | ||
| 8F-2707 | [1] | NUT | ||
| 7F-9819 | [1] | LOCK | ||
| 7F-9818 | [1] | COLLAR | ||
| 5M-1856 | [1] | FAN | ||
| 5M-3178 | [1] | SEAL | ||
| (PART OF PLATE ASSEM. 5M3106) | ||||
| 5M-3249 | [1] | SPACER | ||
| 8M-6702 | [3] | SCREW | ||
| 3B-4504 | [3] | LOCKWASHER | ||
| 8M-6701 | [3] | WASHER | ||
| 7F-7623 | [2] | BOLT | ||
| 3B-4505 | [2] | LOCKWASHER | ||
| 8M-6608 | [1] | COVER ASSEM. | ||
| 8M-6700 | [1] | FRAME ASSEM. | ||
| 7F-7673 | [2] | STUD | ||
| (1 IN EACH COIL ASSEM. 5M8413 AND 5M8414) | ||||
| 1B-4330 | [4] | NUT | ||
| 3B-4504 | [4] | LOCKWASHER | ||
| 7F-4920 | [2] | WASHER (STEEL) | ||
| 7F-7600 | [2] | WASHER (INSUL.) | ||
| 7F-7599 | [2] | BUSHING | ||
| 9B-9178 | [1] | SCREW | ||
| 3B-4504 | [1] | LOCKWASHER | ||
| 9B-9178 | [2] | SCREW | ||
| 8H-3481 | [2] | LOCKWASHER | ||
| 3F-3463 | [4] | SCREW | ||
| 5M-3239 | [2] | PLATE | ||
| 5M-3241 | [2] | GASKET | ||
| 5M-8416 | [2] | SPRING ASSEM. | ||
| 5M-3247 | [1] | PLATE ASSEM. | ||
| 4B-1306 | [4] | SCREW | ||
| 7F-7596 | [2] | SHOE | ||
| 3S-3273 | [1] | COIL ASSEM. | ||
| 5M-8415 | [1] | ARMATURE ASSEM. | ||
| 5M-3118 | [1] | PLATE | ||
| 5M-4389 | [1] | WASHER | ||
| 6H-9144 | [1] | RING | ||
| (PART OF ARMATURE ASSEM. 5M8415) | ||||
| 1L-6312 | [4] | SCREW | ||
| 7H-2079 | [4] | LOCKWASHER | ||
| 1B-8707 | [1] | KEY | ||
| 7H-0387 | [1] | NUT | ||
| 7F-7621 | [1] | WASHER | ||
| 5M-3254 | [1] | COLLAR | ||
| 5M-3179 | [1] | SEAL | ||
| (PART OF PLATE ASSEM. 5M3116) | ||||
| 5M-3116 | [1] | PLATE ASSEM. | ||
| 5M-3117 | [1] | GASKET | ||
| 9B-9134 | [2] | PIN | ||
| (PART OF PLATE ASSEM. 5M3116) | ||||
| 5M-3113 | [1] | BEARING | ||
| 5M-3253 | [1] | FRAME ASSEM. | ||
| 9B-9134 | [2] | PIN | ||
#UE0701230292
6K-2650: CAB ARRANGEMENT
6K2650 CAB ARRANGEMENT
Only separate parts serviced
When complete Arrangement is required order 2V4186
Only separate parts serviced
When complete Arrangement is required order 2V4186
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS#UE0701230293
6K-9074: CAB ARRANGEMENT
6K9074 CAB ARRANGEMENT
Only separate parts serviced
When complete Arrangement is required order 2V4186 listed on Page 136
Only separate parts serviced
When complete Arrangement is required order 2V4186 listed on Page 136
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS#UE0701230294
6K-1203: LIGHTING GP-CAB
6K1203 CAB LIGHTING SYSTEM--24 Volt
4K8033 Lamp parts are shown on Page 55B
4K8033 Lamp parts are shown on Page 55B
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-8352 | [2] | WASHER | |
| 2. | 4K-8045 | [2] | COUPLER | |
| 3. | 1A-2029 | [8] | BOLT 2.86 cm(1.125 in.) long | |
| 3B-4506 | [8] | LOCKWASHER | ||
| -OR- | ||||
| 4L-6454 C | [8] | BOLT 2.54 cm(1.00 in.) long | ||
| 6H-8351 C | [8] | LOCKWASHER | ||
| 4. | 6K-1177 | [2] | SEAL | |
| 5. | 1S-1888 | [2] | BRACKET | |
| 6. | 4K-8036 | [2] | INSULATOR | |
| 7. | 5D-3183 | [2] | NUT | |
| 5D-3184 | [2] | LOCKWASHER | ||
| 8. | 4K-8033 Y | [2] | LAMP ASSEM. | |
| (Separate Illustration) | ||||
| 9. | 8M-8948 | [1] | FUSE (15 amp) | |
| 4K-1522 | [1] | HOLDER | ||
| 10. | 1B-1465 | [1] | SWITCH (light) | |
| 11. | 1S-7446 | [2] | SCREW | |
| 4B-2043 | [2] | NUT | ||
| 3B-4501 | [2] | LOCKWASHER | ||
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UE0701230295
2V-4186: CAB ARRANGEMENT
2V4186 CAB ARRANGEMENT
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS#UE0701230296
6K-4930: CAB GROUP
6K4930 CAB GROUP--FRONT VIEW--PART 1 OF 3
PART OF 6K2650 CAB ARRANGEMENT
PART OF 6K2650 CAB ARRANGEMENT
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-3608 | [2] | CRANK ASSEM. | |
| 2. | 0L-0955 | [2] | SPRING | |
| 3. | 4B-2049 | [8] | NUT | |
| 4. | 3B-4502 | [8] | LOCKWASHER | |
| 5. | 4B-1238 | [8] | SCREW | |
| 6. | 5B-2907 | [2] | SCREW | |
| 7. | 5D-2845 | [2] | BRACKET | |
| 8. | 5B-3155 | [2] | PIN | |
| 9. | 2D-3406 | [2] | PLUG | |
| 10. | 6K-0612 | [2] | GLASS | |
| 11. | 4S-8391 | SEAL 16 feet | ||
| 12. | 7S-1828 | SEAL 6 feet | ||
| 13. | 5B-7267 | [2] | CORK | |
| 14. | 2B-7559 | [1] | CORK | |
| 15. | 2B-7556 | [1] | CORK |
#UE0701230297
6K-4930: CAB GROUP
6K4930 CAB GROUP--FRONT VIEW--PART 2 OF 3
PART OF 6K2650 CAB ARRANGEMENT LISTED ON PAGE 136
6K651 HARNESS PARTS ARE SHOWN ON PAGE 140
PART OF 6K2650 CAB ARRANGEMENT LISTED ON PAGE 136
6K651 HARNESS PARTS ARE SHOWN ON PAGE 140
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-3546 | [1] | PLUG | |
| 2. | 4S-8391 | SEAL 13 feet | ||
| 3. | 6K-1763 | [1] | WINDOW ASSEM. | |
| 4. | 5K-9653 | [1] | GLASS (Front) | |
| 5. | 4S-8391 | SEAL 12 feet | ||
| 6. | 5D-8902 | [2] | BUMPER | |
| 7. | 1B-4202 | [2] | NUT | |
| 8. | 3B-4505 | [2] | LOCKWASHER | |
| 9. | 2D-9535 | [2] | GROMMET | |
| 10. | 6K-0622 | [1] | WIRE ASSEM. | |
| 11. | 2D-8757 | [1] | TERMINAL | |
| 12. | 1F-7240 | [1] | TERMINAL | |
| 7B-4826 | [2] | INSULATOR | ||
| (Parts of 6K622 Wire Assem.) | ||||
| 13. | 6K-0652 | [1] | SOCKET ASSEM. | |
| 14. | 5K-3549 | HOSE 5 inches | ||
| 15. | 6K-0651 Y | [1] | HARNESS ASSEM. | |
| (See Separate Illustration) | ||||
| 16. | 5F-9757 | [1] | GROMMET | |
| 17. | 6K-6361 | [5] | PLUG | |
| 18. | 6K-0444 | [1] | PLATE | |
| 19. | 4B-1229 | [4] | SCREW | |
| 20. | 3B-4502 | [4] | LOCKWASHER | |
| Y | SEPARATE ILLUSTRATION | |||
#UE0701230298
6K-4930: CAB GROUP
6K4930 CAB GROUP--Side View--Part 3 of 3
Part of 6K2650 Cab Arrangement listed on Page 136
Part of 6K2650 Cab Arrangement listed on Page 136
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1853 | [2] | GLASS | |
| 2. | 4S-8391 | SEAL 9 feet | ||
| 3. | 5K-9650 | [2] | GLASS | |
| 4. | 5K-9931 | [1] | DOOR ASSEM. (Right Hand) | |
| 5K-9932 | [1] | DOOR ASSEM. (Left Hand) | ||
| 5. | 2H-1578 | [6] | SHIM | |
| (3 in each 5K9931 & 5K9932 Door Assem.) | ||||
| 6. | 1H-7486 | [1] | LATCH ASSEM. | |
| (Part of 5K9931 Door Assem.) | ||||
| 1H-7485 | [1] | LATCH ASSEM. | ||
| (Part of 5K9932 Assem.) | ||||
| 7. | 2A-0762 | [8] | BOLT | |
| 8. | 3B-4504 | [26] | LOCKWASHER | |
| 9. | 4S-9425 | SEAL 18 feet | ||
| 10. | 3K-7842 | [2] | HANDLE | |
| 5K-4340 | [4] | KEY | ||
| (2 in each 3K7842 Handle) | ||||
| 11. | 3K-8203 | [4] | SCREW | |
| 12. | 3F-1147 | [4] | LOCKWASHER | |
| 13. | 7S-1827 | SEAL 7 feet | ||
| 14. | 6K-0185 | [6] | STRIP | |
| 15. | 1D-4533 | [18] | BOLT | |
| 16. | 1B-4330 | [18] | NUT | |
| (One Half each in 5K9931 & 5K9932 Door Assem.) | ||||
| 17. | 4S-8391 | SEAL 7 feet | ||
| 18. | 6K-4693 | [1] | STOP (Right Hand) | |
| 6K-4694 | [1] | STOP (Left Hand) | ||
| 6K-3781 | [2] | HOLDER | ||
| 19. | 4B-1281 | [6] | SCREW | |
| 8F-8052 | [6] | LOCKWASHER | ||
#UE0701230299
6K-8950: CAB GROUP
6K8950 CAB GROUP--Front View--Part 1 of 3-Type 1
Part of 6K9074 Cab Arrangement listed on Page 136
Part of 6K9074 Cab Arrangement listed on Page 136
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [2] | CRANK ASSEM. | ||
| 2. | [2] | SPRING | ||
| 3. | [8] | NUT | ||
| 4. | [8] | LOCKWASHER | ||
| 5. | [8] | SCREW | ||
| 6. | [2] | SCREW | ||
| 7. | [2] | BRACKET | ||
| 8. | [2] | PIN | ||
| 9. | [2] | PLUG | ||
| 10. | [2] | GLASS | ||
| 11. | SEAL 16 feet | |||
| 12. | SEAL 6 feet | |||
| 13. | [2] | CORK | ||
| 14. | [1] | CORK | ||
| 15. | [1] | CORK | ||
| 16. | [8] | WASHER | ||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Disassembly and Assembly
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
1987/03/16

