AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7K3917 CUTTING EDGE GROUP--Field Installation Provides Bolt-on Cutting Edge. FOR USE WITH 5K3236 AND 7K8603 BUCKETS SHOWN ON PAGES 159 AND 159E 950


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BUCKET GP

WHEEL LOADER 950 WHEEL LOADER 31K
 950 WHEEL LOADER 31K00001-00942 (MACHINE) UE070123 950 31K   (1968)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
CUTTING EDGE GROUP
7K-3917 CUTTING EDGE GROUP
CUTTING EDGE GROUP
7K-3918 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9084 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9085 CUTTING EDGE GROUP
 

#UE0701230400
 

7K-3917: CUTTING EDGE GROUP

7K3917 CUTTING EDGE GROUP--Field Installation
Provides Bolt-on Cutting Edge. FOR USE WITH 5K3236 AND
7K8603 BUCKETS SHOWN ON PAGES 159 AND 159E
c136714 UE070123
7K3917 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-3888 [1] CUTTING EDGE ASSEM.  
  7K-3901 [1] EDGE  
2. 7K-3899 [1] CORNER (R.H.)  
  7K-3900 [1] CORNER (L.H.)  
3. 2J-3506 [16] NUT  
4. 7K-3894 [1] EDGE (Center)  
5. 4F-3672 [16] BOLT  
6. 7K-3890 [2] EDGE (End)  
 

#UE0701230401
 

7K-3918: CUTTING EDGE GROUP

7K3918 CUTTING EDGE GROUP--Field Installation
Provides Bolt-on Cutting Edge for 104" Wide Bucket Assemblies
c137865 UE070123
7K3918 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-3890 [2] CUTTING EDGE (End)  
2. 7K-3887 [1] CUTTING EDGE ASSEM.  
  7K-3906 [1] CUTTING EDGE  
3. 7K-3899 [1] CORNER (R.H.)  
4. 7K-3900 [1] CORNER (L.H.)  
5. 7K-3895 [1] CUTTING EDGE (Center)  
6. 4F-3672 [17] BOLT  
  2J-3506 [17] NUT  
 

#UE0701230402
 

8J-9084: CUTTING EDGE GROUP

8J9084 CUTTING EDGE GROUP
Provides Bolt-on Cutting Edge. FOR USE WITH GENERAL PURPOSE BUCKET
ASSEMBLIES, 8J4254 WELD-ON ADAPTERS AND 8K8161 CUTTING EDGE
AN ATTACHMENT
c147051 UE070123
8J9084 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [9] BOLT  
2. 2J-3507 [9] NUT  
3. 8J-9078 [1] CUTTING EDGE (center)  
4. 8J-9077 [2] CUTTING EDGE (end)  
 

#UE0701230403
 

8J-9085: CUTTING EDGE GROUP

8J9085 CUTTING EDGE GROUP
Provides Bolt-on Cutting Edge. FOR USE WITH 8K9042, 8K9043 BUCKET
ASSEMBLIES AND 8K8162 CUTTING EDGE. AN ATTACHMENT
c147049 UE070123
8J9085 CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [10] BOLT  
2. 2J-3507 [10] NUT  
3. 8J-9076 [1] CUTTING EDGE (center)  
4. 8J-9075 [2] CUTTING EDGE (end)  
 

#UE0701230404
 

7K-7449: BUCKET ASSEMBLY

7K7449 BUCKET ASSEMBLY--2.25 Cubic Yard--96" Wide
Serial No. 81J3381-Up and 31K934-Up. Also part of 7K8603 Bucket Group shown on Page 159E
Only separate parts serviced. When complete Group is required order 8K9039 shown on Page 159F
c136715 UE070123
7K7449 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-5169 [12] NUT  
2. 7K-8374 [2] BAR  
3. 2K-3656 [1] BAR  
4. 7K-4021 [1] BAR (R.H.)  
  7K-4022 [1] BAR (L.H.)  
  6K-4652 [1] CUTTING EDGE ASSEM.  
5. 5K-3697 [1] CORNER (R.H.)  
  5K-3698 [1] CORNER (L.H.)  
6. 6K-4653 [1] CUTTING EDGE  
7. 7K-4023 [1] BAR (R.H.)  
8. 7K-4025 [1] BAR  
9. 7K-4024 [1] BAR (L.H.)  
10. 7K-4036 [1] PLATE ASSEM. (L.H.-Outer)  
11. 7K-4038 [1] PLATE ASSEM. (L.H.-Inner)  
12. 7K-4037 [1] PLATE ASSEM. (R.H.-Inner)  
13. 7K-4035 [1] PLATE ASSEM. (R.H.-Outer)  
 

#UE0701230405
 

9K-8306: BUCKET GP-GENERAL PURPOSE

9K8306 GENERAL PURPOSE BUCKET GROUP--2.50 Cubic Yard--96" Wide
Serial No. 81J3381-Up
Also part of 7K8603 Bucket Group listed on Page 159E
c146067 UE070123
9K8306 BUCKET GP-GENERAL PURPOSE Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9K-8280 [1] HINGE ASSEM. (L.H.-outer  
    (Includes)
2. 2K-4119 [1] BOSS  
3. 2K-3592 [1] BOSS  
4. 9K-8278 [1] HINGE ASSEM. (L.H.-inner)  
    (Includes)
5. 2K-4119 [2] BOSS  
6. 2K-3592 [2] BOSS  
7. 9K-8277 [1] HINGE ASSEM. (R.H.-inner)  
    (Includes)
8. 2K-4119 [2] BOSS  
9. 2K-3592 [2] BOSS  
10. 9K-8279 [1] HINGE ASSEM. (R.H.-outer)  
    (Includes)
11. 2K-3592 [1] BOSS  
12. 2K-4119 [1] BOSS  
13. 2K-3656 [2] BAR  
14. 8K-8094 [2] BAR  
15. 8K-6455 [1] CORNER (R.H.)  
  8K-6456 [1] CORNER (L.H.)  
16. 8K-8161 [1] CUTTING EDGE  
17. 9K-8302 [2] PLATE  
18. 9K-8287 [2] PLATE  
19. 5J-4772 [8] BOLT  
  2J-3505 [8] NUT  
  9H-1031 [8] WASHER  
 

#UE0701230406
 

8K-9039: BUCKET ASSEMBLY

8K9039 BUCKET ASSEMBLY--2.25 Cubic Yard--96" Wide
Serial No. 81J3381-Up and 31K934-Up
Also part of 7K8603 Bucket Group listed on Page 159E
c141413 UE070123
8K9039 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-8094 [2] BAR  
2. 8K-6433 [2] PLATE  
3. 2K-3656 [1] BAR  
4. 7K-4035 [1] PLATE ASSEM. (R.H.-Outer)  
5. 8K-6455 [1] CORNER (R.H.)  
  8K-6456 [1] CORNER (L.H.)  
6. 8K-8161 [1] CUTTING EDGE  
7. 8K-6440 [3] PLATE  
8. 7K-4036 [1] PLATE ASSEM. (L.H.-Outer)  
9. 7K-4038 [1] PLATE ASSEM. (L.H.-Inner)  
10. 7K-4037 [1] PLATE ASSEM. R.H.-Inner)  
 

#UE0701230407
 

6K-8650: BUCKET ASSEMBLY

6K8650 BUCKET ASSEMBLY--General Purpose 3 Cubic Yard--104" Wide
Only separate parts serviced. When complete Bucket is required
order 7K8602 shown on Page 159C
c102991 UE070123
6K8650 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3656 [1] BAR  
2. 1D-4720 [12] NUT  
3. 5K-4387 [1] PLATE ASSEM. (Right Hand)  
  5K-4388 [1] PLATE ASSEM. (Left Hand)  
4. 5K-4381 [1] BAR (Right Hand)  
    (Part of 5K4387 Plate Assem.)
  5K-4382 [1] BAR (Left Hand)  
    (Part of 5K4388 Plate Assem.)
  6K-4659 [1] CUTTING EDGE ASSEM.  
5. 5K-3697 [1] CORNER (Right Hand)  
  5K-3698 [1] CORNER (Left Hand)  
6. 6K-4660 [1] CUTTING EDGE  
7. 6K-3149 [1] PLATE (Right Hand)  
  6K-3136 [1] PLATE (Center)  
  6K-3150 [1] PLATE (Left Hand)  
8. 6K-3137 [2] PLATE  
9. 6K-3445 [1] BAR (Right Hand)  
  6K-3138 [1] BAR (Center)  
  6K-3446 [1] BAR (Left Hand)  
10. 4K-7343 [1] PLATE ASSEM.  
    (Right Hand-Outer)
  4K-7345 [1] PLATE ASSEM.  
    (Right Hand-Inner)
  4K-7346 [1] PLATE ASSEM.  
    (Left Hand-Inner)
  4K-7344 [1] PLATE ASSEM.  
    (Left Hand-Outer)
 

#UE0701230408
 

4K-7341: BUCKET ASSEMBLY

4K7341 BUCKET ASSEMBLY--General Purpose--2 Cubic Yard--96" Wide
c102891 UE070123
4K7341 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-7343 [1] HINGE ASSEM. (Right Hand-Outer)  
  4K-7345 [1] HINGE ASSEM. (Right Hand-Inner)  
  4K-7346 [1] HINGE ASSEM. (Left Hand-Inner)  
  4K-7344 [1] HINGE ASSEM. (Left Hand-Outer)  
  4K-7349 [1] PLATE ASSEM. (Right Hand)  
  4K-7350 [1] PLATE ASSEM. (Left Hand)  
  4K-7289 [1] BAR (Right Hand)  
    (Part of Plate Assem. 4K7349)
  4K-7290 [1] BAR (Left Hand)  
    (Part of Plate Assem. 4K7350)
  4K-7255 [1] CORNER (Right Hand)  
  4K-7256 [1] CORNER (Left Hand)  
    (Parts of Cutting Edge Assem. 6K4661)
  6K-4661 [1] CUTTING EDGE ASSEM.  
  6K-4662 [1] CUTTING EDGE  
    (Part of Cutting Edge Assem. 6K4661)
  3K-5957 [2] PLATE  
 

#UE0701230409
 

7K-1031: ROCK BUCKET GROUP

7K1031 ROCK BUCKET GROUP--With Double Strap Adapters--2.5 Cubic Yard--108" Wide
Note: 6K7038 Cutting Edge and Instruction Form 35705 is available for field replacement of 7K1159 Cutting Edge
c124394 UE070123
7K1031 ROCK BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. [6] NUT  
3. [2] BAR  
4. [1] PLATE (Right Hand)  
  [1] PLATE (Left Hand)  
5. [6] PLUG  
6. [6] TIP  
7. [6] PIN  
  [1] CUTTING EDGE ASSEM.  
8. 5K-9024 [6] ADAPTER  
9. [1] CUTTING EDGE  
10. [1] CORNER (Right Hand)  
  [1] CORNER (Left Hand)  
11. [1] PLATE (Right Hand)  
12. [1] PLATE ASSEM. (Right Hand-Outer)  
13. [1] PLATE (Right Hand)  
14. [1] PLATE ASSEM. (Right Hand-Inner)  
15. [1] PLATE ASSEM. (Left Hand-Inner)  
16. [1] PLATE (Left Hand)  
17. [1] PLATE ASSEM. (Left Hand-Outer)  
18. [1] PLATE (Left Hand)  
 

Information:

Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08
Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 950 :

7K-8603 BUCKET GROUP
GENERAL PURPOSE BUCKET ASSEMBLY
8K-9043 GENERAL PURPOSE BUCKET ASSEMBLY
BUCKET GP-GENERAL PURPOSE
9K-8288 BUCKET GP-GENERAL PURPOSE
GENERAL PURPOSE BUCKET GROUP
9K-8742 GENERAL PURPOSE BUCKET GROUP
GENERAL PURPOSE BUCKET ASSEMBLY
9K-8732 GENERAL PURPOSE BUCKET ASSEMBLY
GENERAL PURPOSE BUCKET GROUP
9K-8746 GENERAL PURPOSE BUCKET GROUP
BUCKET GP-GENERAL PURPOSE
9K-8297 BUCKET GP-GENERAL PURPOSE
GENERAL PURPOSE BUCKET ASSEMBLY
7K-7512 GENERAL PURPOSE BUCKET ASSEMBLY
CUTTING EDGE GROUP
7K-3918 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9084 CUTTING EDGE GROUP
CUTTING EDGE GROUP
8J-9085 CUTTING EDGE GROUP
BUCKET ASSEMBLY
7K-7449 BUCKET ASSEMBLY
BUCKET GP-GENERAL PURPOSE
9K-8306 BUCKET GP-GENERAL PURPOSE
BUCKET ASSEMBLY
8K-9039 BUCKET ASSEMBLY
BUCKET ASSEMBLY
6K-8650 BUCKET ASSEMBLY
BUCKET ASSEMBLY
4K-7341 BUCKET ASSEMBLY

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.