AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

FUEL PUMP HOUSING (3S5456 N/S) D9G TRACK-TYPE TRACTOR


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
LINES GP-FUEL
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
OPERATOR STATION
PANEL GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
OPERATOR STATION
PANEL GP
POWER TRAIN
DRIVE GP
OPERATOR STATION
PANEL GP

TRACK-TYPE TRACTOR D9G TRACK-TYPE TRACTOR 90J
 DUAL D9G TRACTOR 90J00001-00092 (MACHINE) UEG0002S D9G 90J   (1968)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
FUEL TRANSFER PUMP ASSEMBLY
4M-9275 FUEL TRANSFER PUMP ASSEMBLY
FUEL TRANSFER PUMP ASSEMBLY
8S-2704 FUEL TRANSFER PUMP ASSEMBLY
FUEL PUMP HOUSING
3S-5456 FUEL PUMP HOUSING
 

#UEG0002S0130
 

3S-5456: FUEL PUMP HOUSING

FUEL PUMP HOUSING (3S5456 N/S)
c111233 UEG0002S
3S5456 FUEL PUMP HOUSING Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2M-8663 [6] SEAL  
  2M-4453 [6] SEAL  
    (1 OF EACH IN EACH PUMP ASSEM. 2S7264)
  8H-1700 [1] RACK ASSEM.  
  5H-5517 [1] LINK  
    (PART OF RACK ASSEM. 8H1700)
  1H-0512 [1] PIN  
  3H-4731 [1] COLLAR  
    (PARTS OF RACK ASSEM. 8H1700)
  1P-7325 [2] BEARING  
    (PART OF HOUSING ASSEM. 3S5470)
  2A-5351 [6] NUT  
  5H-4488 [6] LIFTER ASSEM.  
  3S-1252 [6] SPRING  
  2A-3856 [4] GUIDE  
    (PART OF HOUSING ASSEM. 3S5470)
  0S-1618 [3] BOLT  
  2A-5328 [3] LOCK  
  7H-9826 [1] PILOT ASSEM.  
    (PARTS OF HOUSING ASSEM. 3S5470)
  3H-0703 [1] DOWEL  
    (PART OF PILOT ASSEM. 7H9826)
  5H-4477 [1] BUSHING  
    (PART OF HOUSING ASSEM.3S5470)
  7M-7420 [1] CAMSHAFT  
  6F-0698 [2] DOWEL  
    (PART OF HOUSING ASSEM.3S5470)
  5H-5553 [6] SCREW  
  5H-4475 [1] BUSHING  
  6F-0698 [2] DOWEL  
    (PARTS OF HOUSING ASSEM.3S5470)
  0S-1617 [10] BOLT  
  3B-4505 [10] LOCKWASHER  
  2S-7264 O [6] PUMP ASSEM.  
  1A-2029 O [16] BOLT  
  9M-7510 O [4] CLAMP  
  1S-7689 [6] FERRULE ASSEM.  
  2A-3348 [12] DOWEL  
    (PARTS OF HOUSING ASSEM.3S5470)
  8M-4668 O [8] CLAMP  
  9F-4476 [1] CLIP  
  3H-2420 [1] GASKET  
  8H-4423 [1] COVER  
  2B-2695 [7] BOLT  
  3B-4505 [7] LOCKWASHER  
  3S-5470 [1] HOUSING ASSEM.  
  5H-1056 [1] DOWEL  
    (PART OF HOUSING ASSEM. 3S5470)
  5B-6565 [1] NUT  
  6F-6234 [1] LOCK  
  5H-4489 [1] WASHER  
  5H-4473 [1] BUSHING  
  5H-4483 [1] TUBE  
  2A-3338 [2] STUD  
    (PARTS OF HOUSING ASSEM.3S5470)
  1B-4202 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  5H-4492 [1] GASKET  
  5H-4491 [1] COVER  
 

#UEG0002S0131
 

FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES
Serial No. 90J1 to 90J72 inclusive and 91J1 to 91J72 inclusive
c121715 UEG0002S
None FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1588 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  7M-7426 [1] LINE ASSEM. NO.6  
  7M-7425 [1] LINE ASSEM. NO.5  
  7M-7430 [1] DAMPER  
  7M-7432 [1] DAMPER  
  7M-7429 [1] CLAMP ASSEM.  
  9F-2978 [3] NUT  
    (PART OF CLAMP ASSEM. 7M7429)
  5H-7225 [6] NUT  
  7M-4603 [6] BODY  
  7M-7431 [6] VALVE SERVICE GROUP  
  2F-2990 [12] PLUG  
    (NOT SHOWN - 2 OF EACH IN EACH OF THE LINE ASSEM.)
  7M-7428 [1] CLAMP  
  5H-5804 [1] LINE ASSEM. NO.4  
  5H-5803 [1] LINE ASSEM. NO.3  
  8H-4429 [1] CLAMP ASSEM.  
  0S-1615 [1] BOLT  
  3B-8995 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8995)
  5H-5764 [1] TUBE  
  3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8998)
  5H-9601 [1] TUBE  
  8F-9567 [1] TUBE (DRAIN)  
  0S-1615 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
  6F-8868 [2] CLAMP  
  5H-5802 [1] LINE ASSEM. NO.2  
  5H-5801 [1] LINE ASSEM. NO.1  
  6F-1069 [6] SEAL ASSEM.  
    1 IN EACH VALVE SERVICE GROUP 7M7431)
  5M-6214 [1] PLUG  
    (NOT SHOWN-USED WITHOUT FUEL RATIO CONTROL)
  5B-3718 [6] SEAL  
    (1 IN EACH VALVE SERVICE GROUP 7M7431)
  1F-1344 [3] NUT  
    (PART OF FITTING 3B8993)
  3B-8993 [1] FITTING  
  1B-8471 [1] CLIP  
  4B-6029 [1] GROMMET  
  8B-9889 [1] CLIP  
  4B-6029 [1] GROMMET  
 

#UEG0002S0132
 

7M-7423: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES (7M7423 N/S)
Effective with Serial No. 90J73-Up and 91J73-Up
c111547 UEG0002S
7M7423 FUEL INJECTION VALVES AND LINES Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1588 [3] BOLT  
  3B-4506 [3] LOCKWASHER  
  7M-7426 [1] LINE ASSEM. NO.6  
  7M-7425 [1] LINE ASSEM. NO.5  
  7M-7430 [1] DAMPER  
  7M-7432 [1] DAMPER  
  7M-7429 [1] CLAMP ASSEM.  
  9F-2978 [3] NUT  
    (PART OF CLAMP ASSEM. 7M7429)
  5H-7225 [6] NUT  
  7M-4603 [6] BODY  
  7M-7428 [1] CLAMP  
  5H-5804 [1] LINE ASSEM. NO.4  
  5H-5803 [1] LINE ASSEM. NO.3  
  8H-4429 [1] CLAMP ASSEM.  
  0S-1615 [1] BOLT  
  3B-8995 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8995)
  5H-5764 [1] TUBE  
  3B-8998 [1] FITTING  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8998)
  5H-9601 [1] TUBE  
  8F-9567 [1] TUBE (DRAIN)  
  0S-1624 [1] BOLT  
  3B-4510 [1] LOCKWASHER  
  0S-1615 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
  6F-8868 [2] CLAMP  
  5H-5802 [1] LINE ASSEM. NO.2  
  5H-5801 [1] LINE ASSEM. NO.1  
  1P-1098 [6] VALVE SERVICE GROUP  
  6F-1069 [6] SEAL ASSEM.  
  5B-3718 [6] SEAL  
  7S-1059 [6] NOZZLE ASSEM.  
  5M-6214 [1] PLUG  
    (NOT SHOWN-USED WITHOUT FUEL RATIO CONTROL)
  1F-1344 [3] NUT  
    (PART OF FITTING 3B8993)
  3B-8993 [1] FITTING  
  1B-8471 [1] CLIP  
  4B-6029 [1] GROMMET  
  8B-9889 [1] CLIP  
  4B-6029 [1] GROMMET  
 

#UEG0002S0133
 

7S-7600: GAUGES AND HEAT INDICATOR

GAUGES AND HEAT INDICATOR (7S7600 N/S)
Serial No. 90J1 to 90J85 inclusive
Additional Gauges are shown on Pages 132A & 133
FOR USE WITH FRONT TRACTOR
c101814 UEG0002S
7S7600 GAUGES AND HEAT INDICATOR Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8998 [1] FITTING  
2. 1F-1344 [1] NUT  
    (Part of 3B8998 Fitting)
3. 4S-8385 H TUBING (.25" Diameter) 56.46"  
    (Ref. No. 20 to Fuel Filter)
4. 3B-8989 [3] FITTING  
  1F-1344 [3] NUT  
    (1 in each 3B8989 Fitting)
5. 4B-0418 [1] CLIP  
6. 4B-6029 [3] GROMMET  
7. 0S-0509 [2] BOLT  
8. 3B-4506 [3] LOCKWASHER  
9. 3D-2023 [1] GROMMET  
10. 8M-1182 [1] INDICATOR (Low Pressure)  
11. 1F-7552 [3] FITTING  
12. 1F-1344 [3] NUT  
    (1 in each 1F7552 Fitting)
13. 4S-8385 H TUBING (.25" Diameter) 13.68"  
    (Ref. No. 15 to Ref. No. 17)
14. 3B-9054 [1] FITTING  
  8F-8996 [1] NUT  
    (Part of 3B9054 Fitting)
15. 1H-1892 [1] GAUGE (Air Pressure)  
16. 7M-6425 [1] CLIP  
17. 8B-1261 [1] TEE  
18. 2S-1989 [1] GAUGE (Water Pressure)  
19. 4S-9207 [1] HEAT INDICATOR  
20. 8M-3163 [1] GAUGE (Fuel Pressure)  
21. 5M-1065 [1] GAUGE (Lubrication Oil Pressure)  
22. 1A-5350 [3] CLIP  
23. 8F-0244 [7] GROMMET  
24. 5B-1959 [1] ADAPTER  
25. 2B-5721 [1] GASKET  
26. 0S-1614 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
27. 4S-8385 H TUBING (.25" Diameter) 29.60"  
    (Ref. No. 21 to Decelerator Supply Line)
28. 7B-7501 [1] CLIP  
29. 2B-2404 [3] CLIP  
30. 4S-8385 H TUBING (.25" Diameter) 9.64"  
    (Ref. No. 17 to Air Supply Line)
31. 5K-0430 [1] CLIP  
32. 1B-3057 [1] CLIP  
33. 0T-0102 [1] BOLT  
  1D-4717 [1] NUT  
  H   ORDER BY THE FOOT
 

#UEG0002S0134
 

7S-7600: GAUGES AND HEAT INDICATOR

GAUGES AND HEAT INDICATOR (7S7600 N/S)
Effective with Serial No. 90J86
Additional Gauges are shown on Page 133
FOR USE WITH FRONT TRACTOR
c133196 UEG0002S
7S7600 GAUGES AND HEAT INDICATOR Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8998 [1] FITTING  
2. 1F-1344 [1] NUT  
3. 4S-8385 H TUBING (.25" Diameter) 56.46"  
4. 3B-8989 [2] FITTING  
  1F-1344 [1] NUT  
5. 4B-0418 [1] CLIP  
6. 4B-6029 [3] GROMMET  
7. 0S-0509 [2] BOLT  
8. 3B-4506 [3] LOCKWASHER  
9. 6B-9940 [1] CONNECTOR  
10. 5K-0430 [1] CLIP  
11. 1P-4558 [2] INSERT  
12. 6B-9938 [1] CONNECTOR  
13. 9S-6309 J HOSE 24"  
14. 3B-9054 [1] FITTING  
  8F-8996 [1] NUT  
15. 1H-1892 [1] GAUGE (Air Pressure)  
16. 7M-6425 [1] CLIP  
17. 1B-3057 [1] CLIP  
18. 2S-1989 [1] GAUGE (Water Pressure)  
19. 4S-9207 [1] HEAT INDICATOR  
20. 8M-3163 [1] GAUGE (Fuel Pressure)  
21. 5M-1065 [1] GAUGE (Lubrication Oil Pressure)  
22. 1A-5350 [3] CLIP  
23. 8F-0244 [7] GROMMET  
24. 5B-1959 [1] ADAPTER  
25. 2B-5721 [1] GASKET  
26. 0S-1614 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
27. 4S-8385 H TUBING (.25" Diameter) 29.60"  
28. 7B-7501 [1] CLIP  
29. 2B-2404 [3] CLIP  
30. 0T-0102 [1] BOLT  
  1D-4717 [1] NUT  
  H   ORDER BY THE FOOT
  J   ORDER BY THE INCH
 

#UEG0002S0135
 

9S-2326: WATER PRESSURE GAUGE GROUP

9S2326 WATER PRESSURE GAUGE GROUP--Field Installation
c111984 UEG0002S
9S2326 WATER PRESSURE GAUGE GROUP Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4131 [1] GAUGE (Water Pressure)  
2. 1P-8563 [1] NUT  
3. 1P-8561 [1] SLEEVE  
4. 1P-8560 [1] CONNECTOR  
  1P-9132 [1] ELBOW (90 degrees)  
    (Not Shown)
 

#UEG0002S0136
 

GAUGES AND HEAT INDICATOR

GAUGES AND HEAT INDICATOR
ADDITIONAL GAUGES ARE SHOWN ON PAGE 133
FOR USE WITH REAR TRACTOR
c102293 UEG0002S
None GAUGES AND HEAT INDICATOR Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8998 [1] FITTING  
2. 1F-1344 [1] NUT  
    (Part of 3B8998 Fitting)
3. 4S-8385 H TUBING (.25" Diameter) 56.60"  
    (Ref. No. 20 to Fuel Filter)
4. 3B-8989 [2] FITTING  
  1F-1344 [2] NUT  
    (1 in each 3B8989 Fitting)
5. 4B-0418 [1] CLIP  
6. 4B-6029 [3] GROMMET  
7. 0S-0509 [1] BOLT  
8. 3B-4506 [2] LOCKWASHER  
9. 3B-9054 [1] FITTING  
  8F-8996 [1] NUT  
    (Part of 3B9054 Fitting)
10. 2S-1989 [1] GAUGE (Water Pressure)  
11. 4S-9207 [1] HEAT INDICATOR  
12. 8M-3163 [1] GAUGE (Fuel Pressure)  
13. 5M-1065 [1] GAUGE (Lubrication Oil Pressure)  
14. 1A-5350 [3] CLIP  
15. 8F-0244 [7] GROMMET  
16. 4S-8385 H TUBING (.25" Diameter) 20.07"  
    (Ref. No. 13 to Ref. No. 22)
17. 5B-1959 [1] ADAPTER  
18. 2B-5721 [1] GASKET  
19. 0S-1614 [2] BOLT  
  1B-4330 [2] NUT  
  3B-4504 [2] LOCKWASHER  
20. 7B-7501 [1] CLIP  
21. 2B-2404 [3] CLIP  
22. 8B-1261 [1] TEE  
23. 4S-8385 H TUBING (.25" Diameter) 7.41"  
24. 1F-7552 [2] FITTING  
  1F-1344 [2] NUT  
    (1 in each 1F7552 Fitting)
25. 3L-6306 [1] SWITCH  
26. 5K-0430 [1] CLIP  
27. 1B-3057 [1] CLIP  
28. 0T-0102 [1] BOLT  
  1D-4717 [1] NUT  
29. 5L-6435 [1] SWITCH  
  H   ORDER BY THE FOOT
 

#UEG0002S0137
 

3S-3578: SERVICE METER GROUP

3S3578 SERVICE METER GROUP
Serial No. 90J1 to 90J70 inclusive & 91J1 to 91J70 inclusive
c102078 UEG0002S
3S3578 SERVICE METER GROUP Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-7001 [1] RETAINER ASSEM.  
  5B-6904 [1] SPRING  
    (Part of 4S7001 Retainer Assem.)
2. 9M-7660 [1] GASKET  
3. 9M-3866 [1] GASKET  
4. 4F-7952 H [1] SEAL  
5. 1D-4539 H [1] BOLT  
6. 3B-4505 H [2] LOCKWASHER  
7. 8H-4714 [1] SHAFT ASSEM.  
8. 1F-3129 [1] PIN  
9. 8H-5198 [1] GEAR (11 Teeth)  
  1B-8703 [1] KEY  
    (Parts of 8H4714 Shaft Assem.)
10. 2B-2695 H [1] BOLT  
11. 3S-3574 [1] HOUSING ASSEM.  
12. 8H-5124 [1] PLATE (Identification)  
13. 7B-3028 [2] SCREW  
14. 8H-5223 [1] BEARING  
15. 4H-1722 [1] SEAL  
    (Parts of 3S3574 Housing Assem.)
16. 6B-8241 [1] GASKET  
17. 8B-4128 [1] COVER  
18. 4B-5158 [2] SCREW  
19. 9M-3865 [1] WINDOW  
20. 3S-9557 [4] SCREW  
  8H-6020 [1] COUNTER ASSEM.  
21. 8H-5961 [1] COUNTER  
22. 6B-6705 [1] GEAR (30 Teeth)  
  H   NOT PART OF 3S3578 SERVICE MET
 

#UEG0002S0138
 

OIL PUMP DRIVE

OIL PUMP DRIVE
c108613 UEG0002S
None OIL PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-3485 [1] GEAR (52T)  
  4H-9743 [1] KEY  
  0S-1591 [1] BOLT  
  0L-0364 [1] LOCK  
  2M-7960 [1] BRACKET ASSEM.  
  4H-1987 [2] BUSHING  
    (PART OF BRKT. ASSEM.2M7960)
  4M-4431 [1] SHAFT  
  9S-1319 [1] WASHER  
  3B-6734 [2] NUT  
  3B-4617 [2] COTTER PIN  
  4F-9351 [4] BOLT  
  0L-0364 [4] LOCK  
  1A-2029 [1] BOLT  
  0L-0364 [1] LOCK  
  4H-1849 [1] COLLAR  
  6B-4733 [1] PIN  
    (PART OF 5H5914 ASSEM.)
  5H-5863 [2] BUSHING  
    (PART OF BRKT ASSEM 5H5866)
  5H-5866 [1] BRACKET ASSEM  
  5H-5914 [1] GEAR ASSEM (25T)  
  4H-9743 [1] KEY  
 

#UEG0002S0139
 

3S-3578: SERVICE METER GROUP

3S3578 SERVICE METER GROUP
Serial No. 90J71 to 90J85 inclusive and 91J71 to 91J85 inclusive
c125325 UEG0002S
3S3578 SERVICE METER GROUP Parts scheme
  For full view, you need register

Parts for your D9G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-7001 [1] RETAINER ASSEM.  
  5B-6904 [1] SPRING  
    (Part of 4S7001 Retainer Assem.)
2. 9M-7660 [1] GASKET  
3. 9M-3866 [1] GASKET  
4. 8M-8515 CH [1] SEAL  
5. 1D-4539 H [1] BOLT  
6. 3B-4505 H [2] LOCKWASHER  
7. 8H-4714 [1] SHAFT ASSEM.  
8. 1F-3129 [1] PIN  
9. 8H-5198 [1] GEAR (11 Teeth)  
  1B-8703 [1] KEY  
    (Parts of 8H4714 Shaft Assem.)
10. 2B-2695 H [1] BOLT  
11. 8S-4995 C [1] HOUSING ASSEM.  
12. 8H-5124 [1] PLATE (Identification)  
13. 7B-3028 [2] SCREW  
14. 8S-4994 [1] BEARING  
15. 4H-1722 [1] SEAL  
    (Parts of 8S4995 Housing Assem.)
16. 6B-8241 [1] GASKET  
17. 8B-4128 [1] COVER  
18. 4B-5158 [2] SCREW  
19. 9M-3865 [1] WINDOW  
20. 3S-9557 [4] SCREW  
  8H-6020 [1] COUNTER ASSEM.  
21. 8H-5961 [1] COUNTER  
22. 6B-6705 [1] GEAR (30 Teeth)  
  C   INDICATES CHANGE FROM PREVIOUS
  H   NOT PART OF 3S3578 SERVICE MET
 

Information:

Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed{0654,1250}
1980/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Caterpillar Parts SIS Catalog D9G :

FUEL FILTER
FUEL FILTER
FUEL TRANSFER PUMP ASSEMBLY
8S-2704 FUEL TRANSFER PUMP ASSEMBLY
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
FUEL TRANSFER PUMP ASSEMBLY
4M-9275 FUEL TRANSFER PUMP ASSEMBLY
FILTER GP-PRIMARY FUEL
8S-8061 FILTER GP-PRIMARY FUEL
PRIMARY FUEL FILTER AND LINES
1M-3340 PRIMARY FUEL FILTER AND LINES
FUEL LINES
2S-8614 FUEL LINES
FUEL PUMP AND GOVERNOR DRIVE GROUP
2M-7900 FUEL PUMP AND GOVERNOR DRIVE GROUP
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
7M-7423 FUEL INJECTION VALVES AND LINES
GAUGES AND HEAT INDICATOR
7S-7600 GAUGES AND HEAT INDICATOR
GAUGES AND HEAT INDICATOR
7S-7600 GAUGES AND HEAT INDICATOR
WATER PRESSURE GAUGE GROUP
9S-2326 WATER PRESSURE GAUGE GROUP
GAUGES AND HEAT INDICATOR
GAUGES AND HEAT INDICATOR
SERVICE METER GROUP
3S-3578 SERVICE METER GROUP
OIL PUMP DRIVE
OIL PUMP DRIVE

Truck sale:

Caterpillar D9G
 
Caterpillar D9G
- Crawler dozers
HOLT CAT
Caterpillar D9G, Crawler dozers, Construction
 
Caterpillar D9G, Crawler dozers, Construction
- Crawler dozers
WILLIAM ADAMS PTY. LTD.
 
26.828 
Caterpillar D9G, Bulldozer, Bau-Und Bergbauausrüstung


1971 CAT D9G
USD $14,900 
1971 CAT D9G

Binkley Equipment
Rochester, Minnesota
1970 CAT D9G
Call 
1970 CAT D9G

Auto Express
RICH CREEK, Virginia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.