955K TRAXCAVATOR 85J00001-04671 (MACHINE) UNDERCARRIAGE Caterpillar SIS

TRACK LOADER 955K TRACK LOADER 85J
955K TRAXCAVATOR 85J00001-04671 (MACHINE) UEG0008S 955K 85J (1968)

Parts group 955K:

For full view, you need register

UNDERCARRIAGE

IDLER GP

FRONT IDLER

FRONT IDLER--Part 1 of 2
Serial No. 85J1 to 85J301 inclusive

FRONT IDLER

FRONT IDLER--Part 2 of 2
Serial No. 85J1 to 85J301 inclusive

5K-5955 FRONT IDLER

FRONT IDLER (5K5955 N/S)--Part 1 of 2
Serial No. 85J302 to 85J2333 inclusive

5K-5955 FRONT IDLER

FRONT IDLER (5K5955 N/S)--Part 2 of 2
Serial No. 85J302 to 85J2333 inclusive

5K-5955 FRONT IDLER

FRONT IDLER (5K5955 N/S)--Part 1 of 2
Effective with Serial No. 85J2334

5K-5955 FRONT IDLER

FRONT IDLER (5K5955 N/S)--Part 2 of 2
Effective with Serial No. 85J2334

ROLLER GP

5K-4542 TRACK ROLLER GROUP

5K4542 TRACK ROLLER GROUP--Single Flange--6 Required--Type 1
Serial No. 85J1 to 85J4190 inclusive
Note: 4S8056 Track Roller Seal Kit is available

5K-4543 TRACK ROLLER GROUP

5K4543 TRACK ROLLER GROUP--Double Flange--6 Required--Type 1
Serial No. 85J1 to 85J4138 inclusive
Note: 4S8056 Track Roller Seal Kit is available

5K-4542 TRACK ROLLER GROUP

5K4542 TRACK ROLLER GROUP--Single Flange--6 Required--Type 2
Serial No. 85J1 to 85J4190 inclusive
Note: 4S8056 Track Roller Seal Kit is available

5K-4543 TRACK ROLLER GROUP

5K4543 TRACK ROLLER GROUP--Double Flange--6 Required--Type 2
Serial No. 85J1 to 85J4138 inclusive
Note: 4S8056 Track Roller Seal Kit is available

7K-8572 ROLLER GP-TRACK SINGLE FLANGE

7K8572 TRACK ROLLER GROUP--Single Flange--6 Required
Effective with Serial No. 85J4191. Only separate parts serviced
When complete Group is required order 1--9S9539 Track Roller Group
plus 4--S1625-Bolt & 4--4D3704-Washer

7K-8571 ROLLER GP-TRACK DOUBLE FLANGE

7K8571 TRACK ROLLER GROUP--Double Flange--4 Required
Effective with Serial No. 85J4139. Only separate parts serviced
When complete Group is required order 1--9S9538 Track Roller Group
plus: 4--S1625-Bolt and 4--4D3704-Washer

9S-9538 TRACK ROLLER GP

9S9538 TRACK ROLLER GROUP--Double Flange--Field Installation

9S-9539 ROLLER GP-TRACK SINGLE FLANGE

9S9539 TRACK ROLLER GROUP--Single Flange--Field Installation

5K-6537 TRACK CARRIER ROLLER GROUP

5K6537 TRACK CARRIER ROLLER GROUP--2 Required
Serial No. 85J1 to 85J2697 inclusive

9S-3570 ROLLER GP-TRACK CARRIER

9S3570 TRACK CARRIER ROLLER GROUP--2 Required
Effective with Serial No. 85J2698

TRACK GP

6K-0909 TRACK GROUP

6K909 TRACK GROUP--15" Triple Grouser Shoe--2 Required
Refer also to Page 167 for special parts. 6K6292 Track Pin and Bushing Group,
Consisting of a complete set of Pins and Bushings for one Track, is available

6K-1928 TRACK GROUP

6K1928 TRACK GROUP--15" Flat Center Shoe--2 Required
Note: 6K6292 Track Pin and Bushing Group, consisting of a complete set of
Pins and Bushings for one track, is available

FRAME GP-TRACK ROLLER

TRACK ROLLER FRAME

TRACK ROLLER FRAME
Serial No. 85J1 to 85J1265 inclusive

5K-6429 TRACK ROLLER FRAME

TRACK ROLLER FRAME (5K6429 N/S)
Serial No. 85J1266 to 85J2305 inclusive

5K-6429 TRACK ROLLER FRAME

TRACK ROLLER FRAME (5K6429 N/S)
Effective with Serial No. 85J2306

Information:

(For parts list, see above)

UNDERCARRIAGE

IDLER GP

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Specifications

Front Idler
955 TRACK-TYPE LOADER POWER TRAIN

Recoil Spring
955 TRACK-TYPE LOADER POWER TRAIN

Front Idlers And Recoil Springs
955L POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Undercarriage Reconditioning Bulletin

Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}

Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}

Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Disassembly and Assembly

Front Idlers
955L TRACK-TYPE LOADER POWER TRAIN

Front Idler Yokes
955L TRACK-TYPE LOADER POWER TRAIN

Hydraulic Track Adjusters
955L TRACK-TYPE LOADER POWER TRAIN

Recoil Springs
955L TRACK-TYPE LOADER POWER TRAIN

Service Magazine

Parts Available To Increase Recoil Spring Force{4158,4050,4150}
1978/06/12

New Idlers And Track Roller Frames Improve Balance And Stability{4159,4151}
1979/11/12

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

LINK GP-TRACK

Technical Information Bulletin

POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS
POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS

Undercarriage Reconditioning Bulletin

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Service Magazine

Remove The Paint From The Seal Counterbore On Track Links For Sealed And Lubricated Track{4169}
1977/09/05

Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Low Volume Track Master Links Are Replaced On Certain Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}

Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}

ROLLER GP

Specifications

Track Rollers
955 TRACK-TYPE LOADER POWER TRAIN

Carrier Roller For The Track
955 TRACK-TYPE LOADER POWER TRAIN

Track Carrier Rollers
955L POWER TRAIN

Track Rollers (Single and Double Flange)
955L POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Undercarriage Reconditioning Bulletin

Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}

Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}

Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}

Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}

Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Disassembly and Assembly

Undercarriage
955K TRACK-TYPE LOADER POWER TRAIN

Track Carrier Rollers
955L TRACK-TYPE LOADER POWER TRAIN

Track Rollers
955L TRACK-TYPE LOADER POWER TRAIN

Service Magazine

Carrier Roller Replacement Rims Now Available{4154}
1984/03/12

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Track-Type Tractor Track Roller Cap Bolt Torque Procedure And Re-Use Guidelines {4180}
2015/05/11

SEAL & BUSHING GP

Undercarriage Reconditioning Bulletin

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

SPRING GP

Specifications

Recoil Spring
955 TRACK-TYPE LOADER POWER TRAIN

Front Idlers And Recoil Springs
955L POWER TRAIN

Disassembly and Assembly

Undercarriage
955K TRACK-TYPE LOADER POWER TRAIN

Recoil Springs
955L TRACK-TYPE LOADER POWER TRAIN

Service Magazine

Parts Available To Increase Recoil Spring Force{4158,4050,4150}
1978/06/12

TRACK GP

Special Instruction

Early (175.5 mm (6.91 inch)) Pitch Track Shoes are Discontinued and are Service Replaced{4170}
Early (175.5 mm (6.91 inch)) Pitch Track Shoes are Discontinued and are Service Replaced{4170}

Technical Information Bulletin

POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS
POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS

Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}

Specifications

Track Roller Frame
955 TRACK-TYPE LOADER POWER TRAIN

Track
955 TRACK-TYPE LOADER POWER TRAIN

Track Rollers
955 TRACK-TYPE LOADER POWER TRAIN

Carrier Roller For The Track
955 TRACK-TYPE LOADER POWER TRAIN

Track
955L POWER TRAIN

Track Roller Frames
955L POWER TRAIN

Track Carrier Rollers
955L POWER TRAIN

Track Rollers (Single and Double Flange)
955L POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Undercarriage Reconditioning Bulletin

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Disassembly and Assembly

Undercarriage
955K TRACK-TYPE LOADER POWER TRAIN

Track Carrier Rollers
955L TRACK-TYPE LOADER POWER TRAIN

Track Rollers
955L TRACK-TYPE LOADER POWER TRAIN

Tracks
955L TRACK-TYPE LOADER POWER TRAIN

Hydraulic Track Adjusters
955L TRACK-TYPE LOADER POWER TRAIN

Track Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN

Service Magazine

Remove The Paint From The Seal Counterbore On Track Links For Sealed And Lubricated Track{4169}
1977/09/05

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

New Idlers And Track Roller Frames Improve Balance And Stability{4159,4151}
1979/11/12

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

General Duty Link Assemblies Replace SALT and Classic Link Assemblies for Certain D5, and D6 Track-Type Tractors and 951, 953, and 955 Track-Type Loaders {4169, 4171}
General Duty Link Assemblies Replace SALT and Classic Link Assemblies for Certain D5, and D6 Track-Type Tractors and 951, 953, and 955 Track-Type Loaders {4169, 4171}

General Duty Link Assemblies Replace Hybrid Link Assemblies for Certain D6D, D6G Track-Type Tractors 963, 955 Track-Type Loaders {4169, 4171}
General Duty Link Assemblies Replace Hybrid Link Assemblies for Certain D6D, D6G Track-Type Tractors 963, 955 Track-Type Loaders {4169, 4171}

UNDERCARRIAGE GP

Undercarriage Reconditioning Bulletin

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}

Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Service Magazine

Adjustment Of Track Tension On Machines With One Carrier Roller Per Side{4150}
1978/02/06

DRIVE GP

Special Instruction

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

MISCELLANEOUS INFORMATION

Undercarriage Reconditioning Bulletin

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

TOOLS

Truck Engine News

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01

Tool Operating Manual

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}

TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Undercarriage Reconditioning Bulletin

Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}

Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}

Service Magazine

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

FRAME GP-TRACK ROLLER

Specifications

Track Roller Frame
955 TRACK-TYPE LOADER POWER TRAIN

Track Roller Frames
955L POWER TRAIN

Parallel Alignment Of Roller Frames
955L POWER TRAIN

Undercarriage Reconditioning Bulletin

Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}

Disassembly and Assembly

Undercarriage
955K TRACK-TYPE LOADER POWER TRAIN

Track Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN

Service Magazine

New Idlers And Track Roller Frames Improve Balance And Stability{4159,4151}
1979/11/12

SPROCKET GP

Reuse And Salvage Guidelines

Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}

GUARD GP

Special Instruction

Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}

CYLINDER GP

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Reuse And Salvage Guidelines

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Magazine

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

1978 CAT 955K

Aurteneche
Nanclares De La Oca, ALAVA, Spain

1970 CAT 955K

IRONPEDDLERS PARTS DIVISION
MONROE, North Carolina

USD $8,294

CAT 955K

Tamburnotti Sas di Tamburnotti F. & C.
Caste San Giovanni, PIACENZA, Italy

USD $8,224

1971 CAT 955K

Tamburnotti Sas di Tamburnotti F. & C.
Caste San Giovanni, PIACENZA, Italy

CAT 955K

BLOUNT PARTS & EQUIPMENT