FRAME AND BODY
COUNTERWEIGHT GPHOOK GP
BUMPER GP
OPERATOR STATION
ROPS/FOPS GPWORK TOOLS
RIPPER GPOPERATOR STATION
ROPS/FOPS GPSEAT GP
FRAME AND BODY
COUNTERWEIGHT GP
#UEG0008S0390
6K-7710: COUNTERWEIGHT GROUP
6K7710 COUNTERWEIGHT GROUP--1,725 POUNDS--Type 1
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| [2] | STUD | |||
| [2] | NUT | |||
| [2] | WASHER | |||
| [1] | PIN | |||
| [1] | COTTER PIN | |||
| [1] | COUNTERWEIGHT | |||
| [1] | COUNTERWEIGHT | |||
| [2] | STUD | |||
| [2] | NUT | |||
| [2] | WASHER | |||
| [2] | WASHER | |||
| [1] | SUPPORT ASSEM. | |||
| [6] | STUD | |||
| [6] | NUT | |||
| [6] | WASHER | |||
#UEG0008S0391
6K-7709: COUNTERWEIGHT GROUP
6K7709 COUNTERWEIGHT GROUP--1,050 POUNDS--Type 1
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | COUNTERWEIGHT | ||
| 2. | [8] | STUD | ||
| [8] | NUT | |||
| 3. | [2] | WASHER | ||
| 4. | [8] | WASHER | ||
| 5. | [1] | SUPPORT ASSEM. | ||
| 6. | [1] | PIN | ||
| [1] | COTTER PIN | |||
| 7. | [2] | STUD | ||
| [2] | NUT | |||
| [2] | WASHER | |||
#UEG0008S0392
3B-2665: FRONT PULL HOOK GROUP
3B2665 FRONT PULL HOOK GROUP
FOR USE WITH CRANKCASE GUARD
FOR USE WITH CRANKCASE GUARD
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS#UEG0008S0393
6K-9708: REAR BUMPER GROUP
6K9708 REAR BUMPER GROUP
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS#UEG0008S0394
9K-1262: MOUNTING CONVERSION GROUP
9K1262 MOUNTING CONVERSION GROUP--Field Installation
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K9708 REAR BUMPER GROUP
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K9708 REAR BUMPER GROUP
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [4] | BOLT | ||
| [4] | NUT | |||
| [8] | WASHER | |||
| 2. | [1] | PLATE ASSEM. | ||
| 3. | [4] | BOLT | ||
| [4] | NUT | |||
| 4. | [12] | WASHER | ||
| 5. | [1] | BELT ASSEM. | ||
| [2] | ANGLE | |||
| 6. | [2] | BAR | ||
| 7. | [1] | BRACKET ASSEM. (R.H.) | ||
| [2] | NUT (Weld) | |||
| 8. | [1] | BRACKET ASSEM. (L.H.) | ||
| [2] | NUT (Weld) | |||
| 9. | [1] | PLATE (R.H.) | ||
| [1] | PLATE (L.H.) | |||
| 10. | [4] | BOLT | ||
| 11. | [8] | SCREW (Drive) | ||
| 12. | [2] | PLATE (Warning) | ||
| [2] | PLATE (Warning) | |||
| [2] | PLATE (Warning) | |||
| 13. | [1] | BRACE ASSEM. (R.H.) | ||
| [4] | NUT (Weld) | |||
| 14. | [1] | BRACE ASSEM. (L.H.) | ||
| [4] | NUT | |||
| 15. | [8] | BOLT | ||
| [4] | LOCKWASHER | |||
| 16. | [12] | BOLT | ||
| [12] | WASHER | |||
| 17. | [6] | STUD | ||
| [6] | NUT | |||
| [6] | WASHER | |||
| 18. | [1] | BRACE ASSEM. (R.H. Rear) | ||
| [1] | BRACE ASSEM. (L.H. Rear) | |||
| 19. | [1] | BRACKET ASSEM. (R.H.) | ||
| 20. | [2] | NUT (Weld) | ||
| 21. | [1] | BRACKET ASSEM. (L.H.) | ||
| 22. | [2] | NUT (Weld) | ||
| 23. | [2] | WIRE ASSEM. | ||
| [1] | TERMINAL | |||
| [1] | CONNECTOR | |||
| H | [2] | BOLT | ||
| [2] | NUT | |||
| [2] | LOCKWASHER | |||
| [4] | WASHER | |||
| H | NOT SHOWN-MOUNTED FROM REAR SH | |||
#UEG0008S0395
8K-9689: MOUNTING GROUP
8K9689 MOUNTING GROUP--Part 1 of 2--Factory Installation
Effective with Serial No. 85J3948
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K9708 REAR BUMPER GROUP
Effective with Serial No. 85J3948
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K9708 REAR BUMPER GROUP
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [4] | BOLT | ||
| [4] | NUT | |||
| [8] | WASHER | |||
| 2. | [1] | PLATE ASSEM. | ||
| 3. | [1] | FRAME ASSEM. | ||
| 4. | [3] | NUT (Weld) | ||
| 5. | [4] | NUT (Weld) | ||
| 6. | [1] | BAR | ||
| 7. | [2] | BOSS | ||
| 8. | [4] | NUT | ||
| 9. | [1] | RETAINER ASSEM. | ||
| [1] | NUT | |||
| [1] | WASHER | |||
| 10. | [2] | SPACER | ||
| 11. | [2] | REINFORCEMENT | ||
| 12. | [1] | BRACE ASSEM. (R.H.) | ||
| [4] | NUT | |||
| 13. | [1] | BRACE ASSEM. (L.H.) | ||
| [4] | NUT | |||
| 14. | [8] | BOLT | ||
| [8] | LOCKWASHER | |||
| 15. | [4] | SPACER | ||
| 16. | [12] | BOLT | ||
| [12] | WASHER | |||
| 17. | [1] | BRACE ASSEM. (R.H.) | ||
| [1] | BRACE ASSEM. (L.H.) | |||
| 18. | [1] | WIRE ASSEM. | ||
| [1] | TERMINAL | |||
| [1] | CONNECTOR | |||
| 19. | [1] | BRACKET ASSEM. (R.H.) | ||
| 20. | [2] | NUT | ||
| 21. | [1] | BRACKET ASSEM. (L.H.) | ||
| 22. | [2] | NUT | ||
#UEG0008S0396
8K-9689: MOUNTING GROUP
8K9689 MOUNTING GROUP--Part 2 of 2--Factory Installation
Effective with Serial No. 85J3948
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K9708 REAR BUMPER GROUP
Effective with Serial No. 85J3948
FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
CANNOT BE USED WITH 6K9708 REAR BUMPER GROUP
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-8063 | [4] | BOLT | |
| 2J-3506 | [4] | NUT | ||
| 2. | 2S-0115 | [12] | WASHER | |
| 3. | 8K-9389 | [2] | BAR | |
| 4. | 0L-1178 | [4] | BOLT | |
| 5. | 8K-9891 | [1] | SUPPORT ASSEM. (R.H.) | |
| 6. | 9F-2978 | [10] | NUT (Weld) | |
| 7. | 5M-3012 | [2] | LUG | |
| 8. | 1F-0748 | [4] | NUT (Weld) | |
| 9. | 3D-0427 | [6] | STUD | |
| 2J-3505 | [6] | NUT | ||
| 9H-1031 | [6] | WASHER | ||
| 10. | 8K-9881 | [2] | BAR | |
| 11. | 1M-5044 | [2] | PLATE | |
| 12. | 8K-9892 | [1] | SUPPORT ASSEM. (L.H.) | |
| 5M-3012 | [2] | LUG | ||
| 13. | 2K-7051 | [2] | BAR | |
| 14. | 1F-0748 | [8] | NUT (Weld) | |
| 15. | 4B-5440 | [2] | SCREW PLATE | |
| 16. | 7K-6849 | [2] | ANGLE ASSEM. | |
| 17. | 9F-2978 | [12] | NUT (Weld) | |
| 18. | 6D-4709 | [1] | BELT ASSEM. |
#UEG0008S0397
9K-7860: MOUNTING CONVERSION GROUP
9K7860 MOUNTING CONVERSION GROUP--Field Installation--Type 1
3V7114 Belt parts are shown on Page 126F. FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
Note: 9K7515 Support Assembly R.H. and 9K7516 Support Assembly L.H. are required when this group is used
3V7114 Belt parts are shown on Page 126F. FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER PROTECTIVE STRUCTURE
Note: 9K7515 Support Assembly R.H. and 9K7516 Support Assembly L.H. are required when this group is used
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9K-7419 | [1] | BRACKET ASSEM. (R.H.) | |
| 9K-7420 | [1] | BRACKET ASSEM. (L.H.) | ||
| 2. | 9H-7729 | [1] | DOWEL | |
| 3. | 9F-2978 | [3] | NUT | |
| 4. | 1A-0458 | [16] | BOLT | |
| 5. | 3B-4512 | [16] | LOCKWASHER | |
| 6. | 1V-2959 C | [1] | SEAT BELT GROUP | |
| 7. | 3V-7114 Y | [1] | BELT GROUP | |
| (Separate Illustration) | ||||
| -OR- | ||||
| 8. | 3V-7113 | [1] | BELT GROUP | |
| (No Serviceable Parts) | ||||
| 9. | 9K-8028 | [2] | BRACKET ASSEM. | |
| 10. | 9K-7407 | [1] | PLATE (R.H.) | |
| 9K-7406 | [1] | PLATE (L.H.) | ||
| 11. | 9K-7393 | [2] | BAR (Front) | |
| 9K-7392 | [2] | BAR (Rear) | ||
| 12. | 1P-2270 | [2] | PLATE (Warning) | |
| 4B-4158 | [8] | SCREW | ||
| 13. | 8K-9389 | [2] | BAR | |
| 14. | 1A-5822 | [8] | BOLT | |
| 15. | 3B-4508 | [10] | LOCKWASHER | |
| 16. | 9F-9522 | [2] | BOLT | |
| 9H-1031 | [2] | LOCKWASHER | ||
| 17. | 9K-7553 | [1] | PLATE | |
| 18. | 9K-7549 | [1] | CORNER ASSEM. (R.H.) | |
| 9F-2978 | [2] | NUT | ||
| 19. | 9K-7550 | [1] | CORNER ASSEM. (L.H.) | |
| 9F-2978 | [1] | NUT | ||
| 20. | 0L-1351 | [8] | BOLT | |
| 3B-4506 | [8] | LOCKWASHER | ||
| 4B-4278 | [8] | WASHER | ||
| 21. | 0S-1595 | [2] | BOLT | |
| 4B-4280 | [2] | WASHER | ||
| 22. | 9K-7546 | [1] | BRACKET ASSEM. | |
| 23. | 9K-7545 | [1] | BLOCK | |
| 24. | 0T-0319 | [1] | BOLT | |
| 25. | 3B-4507 | [3] | LOCKWASHER | |
| 26. | 9K-7544 | [1] | STRIP | |
| 27. | 5K-9519 | [1] | BLOCK | |
| 28. | 1D-4707 | [2] | BOLT | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0008S0398
9K-7860: MOUNTING CONVERSION GROUP
9K7860 MOUNTING CONVERSION GROUP--Field Installation--Type 2
3V7114 Belt parts are shown on Page 126F. FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER
PROTECTIVE STRUCTURE. Note: 9K7515 Support Assembly R.H. and 9K7516 Support Assembly L.H. are
required when this group is used
3V7114 Belt parts are shown on Page 126F. FOR USE WITH OTHER THAN CATERPILLAR BUILT ROLL-OVER
PROTECTIVE STRUCTURE. Note: 9K7515 Support Assembly R.H. and 9K7516 Support Assembly L.H. are
required when this group is used
For full view, you need register
Parts for your 955K TRACK LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9K-7421 C | [1] | BRACKET ASSEM. (R.H.) | |
| 2. | 9F-2978 | [3] | NUT | |
| 3. | 9K-7422 C | [1] | BRACKET ASSEM. (L.H.) | |
| 4. | 9F-2978 | [3] | NUT | |
| 5. | 9H-7729 C | [2] | DOWEL | |
| 6. | 1D-4707 | [2] | BOLT | |
| 7. | 1A-0458 | [16] | BOLT | |
| 3B-4512 | [16] | LOCKWASHER | ||
| 8. | 3B-4506 | [8] | LOCKWASHER | |
| 4B-4278 | [8] | WASHER | ||
| 9. | 9K-8028 | [2] | BRACKET ASSEM. | |
| 10. | 9K-7407 | [1] | PLATE (R.H.) | |
| 9K-7406 | [1] | PLATE (L.H.) | ||
| 11. | 9K-7393 | [2] | BAR (front) | |
| 9K-7392 | [2] | BAR (rear) | ||
| 12. | 1P-2270 | [2] | PLATE (warning) | |
| 4B-4158 | [8] | SCREW | ||
| 13. | 8K-9389 | [2] | BAR | |
| 14. | 1A-5822 | [8] | BOLT | |
| 15. | 3B-4508 C | [15] | LOCKWASHER | |
| 16. | 9F-9522 | [2] | BOLT | |
| 9H-1031 | [2] | WASHER | ||
| 17. | 9K-7553 | [1] | PLATE | |
| 18. | 9K-7553 | [1] | CORNER ASSEM. (R.H.) | |
| 9F-2978 | [2] | NUT | ||
| 19. | 1V-7058 C | [1] | CORNER ASSEM. (L.H.) | |
| 9F-2978 | [2] | NUT | ||
| 20. | 0L-1351 C | [8] | BOLT | |
| 22. | 1V-7030 C | [1] | BRACKET | |
| 23. | 9K-7545 | [1] | BLOCK | |
| 24. | 0T-0319 | [1] | BOLT | |
| 25. | 3B-4507 | [3] | LOCKWASHER | |
| 26. | 9K-7544 | [1] | STRIP | |
| 27. | 5K-9519 | [1] | BLOCK | |
| 28. | 9K-7832 C | [1] | BRACKET ASSEM. | |
| 29. | 0S-1621 C | [6] | BOLT | |
| 30. | 0L-2072 C | [3] | CLIP | |
| 31. | 9K-7834 C | [1] | WIRE ASSEM. | |
| 32. | 4D-5371 C | [2] | CLIP | |
| 33. | 9K-7833 C | [1] | WIRE ASSEM. | |
| 34. | 2B-2404 C | [1] | CLIP | |
| 35. | 0T-0102 C | [4] | BOLT | |
| 36. | 3B-4506 C | [4] | LOCKWASHER | |
| 37. | 8K-5443 C | [2] | CLIP | |
| 38. | 1K-6705 C | [1] | BOLT | |
| 39. | 9K-7831 C | [1] | BRACKET ASSEM. | |
| 40. | 1V-2959 C | [1] | SEAT BELT GROUP | |
| (Includes) | ||||
| 3V-7114 Y | [1] | BELT GROUP | ||
| (Separate Illustration) | ||||
| -OR- | ||||
| 3V-7113 | [1] | BELT GROUP | ||
| (No Serviceable Parts) | ||||
| 41. | 2K-8270 C | [1] | NUT ASSEM. | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0008S0399
3V-7114: BELT GP
3V7114 BELT GROUP
Part of 9K7860 Mounting Conversion Group shown on Pages 126D & 126E
Part of 9K7860 Mounting Conversion Group shown on Pages 126D & 126E
For full view, you need register
