AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8L9650 GOVERNOR GROUP--Part 2 of 2--Type 3 Serial No. 4B575-Up. Part of 8L9651 Fuel Pump Housing and Governor Group shown on Pages 24A and 24B 3304


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
GOVERNOR GP
TORQUE CONTROL GP
GOVERNOR GP
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 D330C ENGINE 04B00001-06031 UEG0014S 3304 04B   (1968)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
FUEL PUMP HOUSING & GOVERNOR
FUEL PUMP HOUSING & GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR
8L-9651 FUEL PUMP HOUSING AND GOVERNOR
FUEL PUMP HOUSING AND GOVERNOR
8L-9651 FUEL PUMP HOUSING AND GOVERNOR
 

#UEG0014S0060
 

8L-9650: GOVERNOR GROUP

8L9650 GOVERNOR GROUP--Part 2 of 2--Type 3
Serial No. 4B575-Up. Part of 8L9651 Fuel Pump Housing and Governor Group shown on Pages 24A and 24B
c153055 UEG0014S
8L9650 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4176 [1] COVER ASSEM.  
    (Includes)
2. 8L-4153 [1] LEVER  
3. 8L-4158 [1] SHAFT  
4. 1S-7984 [1] BEARING  
5. 2M-2489 [2] SEAL  
6. 1S-7336 [2] LOCK  
7. 8L-4152 [1] LEVER  
8. 0S-1614 [4] BOLT  
9. 2S-7307 [2] INSULATOR  
10. 2S-7387 [1] SCREW  
11. 8L-8883 [1] SHAFT  
12. 4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  8F-1326 [2] WASHER  
13. 2B-2695 [1] BOLT  
14. 3F-9556 [3] WASHER  
15. 1B-2714 [2] BOLT  
16. 1B-4330 [2] NUT  
17. 3B-4504 [2] LOCKWASHER  
18. 8L-4174 [1] PLATE ASSEM.  
    (Includes)
19. 8L-4175 [1] DOWEL  
20. 2L-1352 [2] BOLT  
21. 5L-8991 [1] GASKET  
22. 1B-9575 [1] BOLT  
23. 6L-1597 [1] GASKET  
24. 0S-1082 [2] BOLT  
25. 3S-1494 [1] SCREW  
26. 3S-1542 [1] SCREW  
27. 2J-0157 [2] SEAL  
28. 5L-8992 [1] COVER  
29. 6L-1756 [1] BOLT (drilled head)  
  4B-9747 [3] WASHER  
30. 4N-4063 [1] LEVER ASSEM.  
    (Includes)
  9S-4466 [1] LEVER ASSEM.  
31. 9M-9788 [1] PLUNGER  
32. 4L-9971 [1] SPRING  
33. 5H-1351 [1] PIN  
34. 2N-4386 [1] COVER  
 

#UEG0014S0061
 

FUEL PUMP HOUSING & GOVERNOR

FUEL PUMP HOUSING & GOVERNOR
Serial No. 4B1 to 4B574 inclusive. 7L529 Governor and 7S8831 Pump
Housing parts are shown on Pages 22, 23 and 28
c103024 UEG0014S
None FUEL PUMP HOUSING & GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-0529 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
2. 8M-9140 [1] SPRING  
3. 7L-0552 [1] GASKET  
4. 0S-1618 [3] BOLT  
5. 3B-4505 [5] LOCKWASHER  
6. 7S-8831 Y [1] PUMP GROUP  
    (See Separate Illustration)
7. 1B-9575 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0014S0062
 

2S-9519: STOP GP-RACK

2S9519 RACK STOP GROUP
Serial No. 4B1 to 4B699 inclusive
Refer also to Page 70 for special parts
c106098 UEG0014S
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] BOLT  
2. [1] RETAINER  
3. [1] BAR  
4. [2] SPACER  
5. [2] INSULATOR  
6. [1] CONTACT  
7. [1] LOCK  
8. [1] SHIM  
 

#UEG0014S0063
 

8L-8682: GOVERNOR TORQUE SPRING

8L8682 GOVERNOR TORQUE SPRING
Serial No. 4B700 to 4B4291 inclusive. Also available as an
attachment from Serial No. 4B1 to 4B699 inclusive
c103035 UEG0014S
8L8682 GOVERNOR TORQUE SPRING Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] RETAINER  
2. [1] CONTACT  
3. [1] SPRING  
4. [1] BAR  
5. [2] SPACER  
6. [2] INSULATOR  
7. [2] BOLT  
8. [1] SPACER  
9. [1] LOCK  
 

#UEG0014S0064
 

8L-9651: FUEL PUMP HOUSING AND GOVERNOR

FUEL PUMP HOUSING AND GOVERNOR (8L9651 N/S)
Serial No. 4B575 to 4B5546 inclusive. 8L9650 Governor
and 7S8831 Pump parts are shown on Pages 23A, 23B, 23C, 23D, 28 and 28A
c103306 UEG0014S
8L9651 FUEL PUMP HOUSING AND GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-9650 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
2. 8M-9140 [1] SPRING  
3. 7L-0552 [1] GASKET  
4. 0S-1618 [3] BOLT  
5. 3B-4505 [5] LOCKWASHER  
6. 7S-8831 Y [1] PUMP GROUP  
    (See Separate Illustration)
7. 1B-9575 [2] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0014S0065
 

8L-8682: GOVERNOR TORQUE SPRING

8L8682 GOVERNOR TORQUE SPRING
Serial No. 4B4292-Up
c112412 UEG0014S
8L8682 GOVERNOR TORQUE SPRING Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] BOLT  
2. [1] LOCK  
3. [1] INSULATOR  
4. [1] CONTACT (.018" Thick)  
5. [1] BAR  
6. [1] RETAINER  
7. [1] SPRING (.022" Thick)  
8. [1] SPACER (.032" Thick)  
9. [1] RETAINER  
 

#UEG0014S0066
 

8L-9651: FUEL PUMP HOUSING AND GOVERNOR

FUEL PUMP HOUSING AND GOVERNOR (8L9651 N/S)
Serial No. 4B5547-Up. 8L9650 Governor and 3N3387 Pump
parts are shown on Pages 23A through 23D and 28B. See Page
72A-2 for special parts
c141765 UEG0014S
8L9651 FUEL PUMP HOUSING AND GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-9650 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
2. 8M-9140 [1] SPRING  
3. 7L-0552 [1] GASKET  
4. 0S-1618 [3] BOLT  
5. 3B-4505 [5] LOCKWASHER  
6. 3N-3387 YC [1] PUMP GROUP  
    (Separate Illustration)
7. 1B-9575 [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0014S0067
 

9H-2256: FUEL PRIMING PUMP GROUP

9H2256 FUEL PRIMING PUMP GROUP
Part of 7L261 Fuel Filter and Priming Pump Groups shown on Pages 26 through 27
c147588 UEG0014S
9H2256 FUEL PRIMING PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-6718 [ 2] BALL  
2. 1H-1023 [ 2] SEAL  
3. 1M-6781 [ 2] NUT  
 

#UEG0014S0068
 

7L-0543: FUEL TRANSFER PUMP GROUP

7L543 FUEL TRANSFER PUMP GROUP (7L247 N/S)
Serial No. 4B1 to 4B4821 inclusive
c105125 UEG0014S
7L0543 FUEL TRANSFER PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-8616 [1] NUT  
2. 8H-9806 [1] GEAR (11 Teeth)  
3. 6J-2419 [2] SEAL  
4. 7S-4439 [1] RING  
5. 7S-4434 [1] BODY ASSEM.  
6. 8F-6058 [1] BEARING  
7. 2S-6838 [1] SHAFT  
    (Parts of 7S4434 Body Assem.)
8. 8S-4368 [1] GEAR (Idler 10 Teeth)  
9. 8L-6295 [1] COVER ASSEM.  
10. 8S-5575 [1] SEAL  
11. 7S-4433 [2] FERRULE  
    (Parts of 8L6295 Cover Assem.)
12. 7H-3171 [1] PLUG  
13. 8S-4373 [1] SHAFT ASSEM.  
14. 8S-4368 [1] GEAR (Drive 10 Teeth)  
    (Part of 8S4373 Shaft Assem.)
15. 9F-6641 [6] SCREW  
16. 4B-3388 H [2] BOLT  
17. 3B-4505 H [2] LOCKWASHER  
18. 7S-2374 [1] GASKET  
19. 8S-4375 [1] CAGE ASSEM.  
20. 8F-6058 [1] BEARING  
21. 4S-7756 [2] SEAL  
    (Parts of 8S4375 Cage Assem.)
22. 3H-1489 [1] KEY  
23. 8B-1261 H [1] TEE  
24. 3B-7738 H [1] NIPPLE  
25. 4D-9986 H [1] SEAL  
26. 4M-8303 H [1] SEAL  
27. 7S-4441 H [1] ADAPTER (Service Meter)  
  H   NOT PART OF 7L543 TRANSFER PUM
 

#UEG0014S0069
 

7N-0950: SEPARATOR GP-WATER

7N950 WATER SEPARATOR GROUP
AN ATTACHMENT
c163074 UEG0014S
7N0950 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7624 [1] BASE  
2. 6N-7617 [1] ELEMENT  
3. 5M-6213 [2] PLUG  
4. 2P-4173 [1] COCK  
5. 6N-7618 [1] CLAMP  
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet
1979/08/22
Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Seal Used On Governor Control Shaft
1982/12/15
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Equipment
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (4N4864)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L543 and 2N8603)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Output Shaft Governor<BR> (8L8661)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Equipment
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Adjustable &quot;Dashpot&quot;<BR> (Close Regulation Type Governor)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel System Timing<BR> (Engines With Timing Pointer)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor<BR> (8N6774)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Governor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Adapter Housing And Levers
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Check Valve And Bypass Valve
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Governor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
A New Exhaust Manifold And Fuel Pump Heat Shield Is Used On Industrial Engines That Have A Woodward Governor With An Electric Motor{1059,1250,1289}
1978/05/29
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Tachometer Drive Adapter Has Increased Service Life{7462,1288}
1979/01/22
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3304 :

GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
7L-0529 GOVERNOR GROUP
GOVERNOR GROUP
7L-0529 GOVERNOR GROUP
ACCESSORY DRIVE GROUP
7L-0260 ACCESSORY DRIVE GROUP
FUEL PUMP HOUSING & GOVERNOR
FUEL PUMP HOUSING & GOVERNOR
STOP GP-RACK
2S-9519 STOP GP-RACK
GOVERNOR TORQUE SPRING
8L-8682 GOVERNOR TORQUE SPRING
FUEL PUMP HOUSING AND GOVERNOR
8L-9651 FUEL PUMP HOUSING AND GOVERNOR
GOVERNOR TORQUE SPRING
8L-8682 GOVERNOR TORQUE SPRING
FUEL PUMP HOUSING AND GOVERNOR
8L-9651 FUEL PUMP HOUSING AND GOVERNOR
FUEL PRIMING PUMP GROUP
9H-2256 FUEL PRIMING PUMP GROUP
FUEL TRANSFER PUMP GROUP
7L-0543 FUEL TRANSFER PUMP GROUP

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.