AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N7250 TURBOCHARGER CARTRIDGE GROUP Part of 8S4590 Turbocharger Assembly shown on Page 62-1 3304 INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
ELECTRICAL AND STARTING SYSTEM
SHUTOFF GP
CONTACTOR GP
SHUTOFF GP
CONTACTOR GP
SHUTOFF GP
CONTACTOR GP

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 D330C ENGINE 04B00001-06031 UEG0014S 3304 04B   (1968)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER AND MOUNTING
TURBOCHARGER AND MOUNTING
TURBO GP
7S-5739 TURBO GP
TURBO GP
8S-4590 TURBO GP
TURBO GP
8S-4590 TURBO GP
CARTRIDGE GP
7N-7250 CARTRIDGE GP
 

#UEG0014S0260
 

7N-7250: CARTRIDGE GP

7N7250 TURBOCHARGER CARTRIDGE GROUP
Part of 8S4590 Turbocharger Assembly shown on Page 62-1
c216861 UEG0014S
7N7250 CARTRIDGE GP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4484 J [1] NUT  
2. 3S-4481 [1] IMPELLER  
3. 9M-8919 J [1] RING  
4. 5P-5756 J [1] SEAL  
5. 3S-5135 J [1] SEAL  
6. 4S-9736 [1] COLLAR  
7. 7N-3760 [1] SHROUD  
8. 4S-9701 [1] SHAFT AND WHEEL ASSEM.  
9. 7N-3759 J [1] RING  
10. 9M-8915 [3] RING  
11. 7N-7252 R [1] HOUSING ASSEM.  
    (Includes)
  4M-6646 [2] PIN  
12. 6N-5004 J [1] BEARING  
13. 8S-5169 R [1] PLATE ASSEM.  
14. 3S-4488 J [3] SCREW  
  3S-4487 J [3] PLATE  
15. 3S-4483 [1] SPACER  
  8S-8096 H [1] PLATE (name)  
  2F-0808 H [2] SCREW  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6N-7239 [1] KIT (cartridge)  
    (Includes Parts Marked J)
  9N-2041 J [1] KIT (bearing)  
  H   NOT SHOWN-MOUNTED ON CARTRIDGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0014S0261
 

8L-4290: OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT

8L4290 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
Type 1
8L4289 Solenoid Shut-Off Group parts are shown on Page 45
c101426 UEG0014S
8L4290 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-1192 [1] WIRING GROUP  
  4B-9388 WIRE 27 feet  
  2L-9724 [4] CLIP  
  2L-8075 [21] TERMINAL (No. 8 Screw)  
  2L-8081 [2] TERMINAL (1/2" Screw)  
1. 3B-9400 [1] FITTING  
2. 5H-4349 [1] HOSE ASSEM. (22" Long)  
3. 3B-7264 [1] NIPPLE  
4. 6L-5855 [1] TERMINAL STRIP  
5. 4B-1237 [2] SCREW  
  3B-4502 [2] LOCKWASHER  
6. 0S-1613 [3] BOLT  
  3B-4504 [3] LOCKWASHER  
7. 9F-7837 [1] CONTACTOR (Oil Pressure)  
8. 8L-8171 [1] BRACKET  
9. 0S-1594 [2] BOLT  
10. 3B-6552 [2] ELBOW  
11. 8L-4289 Y [1] SHUT-OFF GROUP  
    (See Separate Illustration)
12. 2L-3402 [1] SWITCH  
13. 5L-6435 [1] CONTACTOR (Water Temperature)  
  4F-8184 [1] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0014S0262
 

5L-8979: OIL PRESSURE AND WATER TEMPERATURE SAFETY CONTACTOR GROUP

5L8979 OIL PRESSURE AND WATER TEMPERATURE SAFETY CONTACTOR GROUP
c76924 UEG0014S
5L8979 OIL PRESSURE AND WATER TEMPERATURE SAFETY CONTACTOR GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [1] WIRING DIAGRAM  
  4F-8184 [1] BUSHING  
    (CONTACTOR)
  5L-6435 [1] CONTACTOR  
    (WATER TEMPERATURE)
  3L-6306 [1] SWITCH  
    (OIL PRESSURE)
 

#UEG0014S0263
 

8L-4290: OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT

8L4290 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF
ARRANGEMENT--Type 2
5L8984 and 3N584 Shut-Off parts are shown on Pages 44B and 44C
c132939 UEG0014S
8L4290 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4L-1192 [1] WIRING GROUP  
  4B-9388 WIRE 27 feet  
  2L-9724 [4] CLIP  
  2L-8075 [21] TERMINAL (No. 8 Screw)  
  2L-8081 [2] TERMINAL (1/2" Screw)  
1. 3B-9400 [1] FITTING  
2. 5H-4349 [1] HOSE ASSEM. (22" Long)  
3. 3B-7264 [1] NIPPLE  
4. 6L-4715 [1] PLATE  
5. 0S-1613 [3] BOLT  
  3B-4504 [3] LOCKWASHER  
6. 2N-6955 [1] SWITCH  
7. 3B-6552 [1] ELBOW  
8. 5L-8984 [1] SHUT-OFF GROUP  
    -OR-
  3N-0584 Y [1] SHUT-OFF GROUP  
    (See Separate Illustration)
9. 2L-3402 [1] SWITCH  
10. 5L-6435 [1] CONTACTOR (Water Temperature)  
  4F-8184 [1] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0014S0264
 

7L-7367: CONTACTOR GP-OVERSPEED

7L7367 OVERSPEED CONTACTOR GROUP
FOR USE WITH SAFETY SHUT-OFF
Only separate parts serviced. When complete
Group is required order 3N6385 shown on Page 63A-2
c140000 UEG0014S
7L7367 CONTACTOR GP-OVERSPEED Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4560 [2] BOOT  
2. 3N-4026 C [1] CONTACTOR (Overspeed)  
  5M-1822 [3] WASHER  
  C   INDICATES CHANGE
 

#UEG0014S0265
 

8L-4290: SHUT-OFF ARRANGEMENT

8L4290 SHUT-OFF ARRANGEMENT--Type 3
3N584 Shut-Off parts are shown on Page 44C
c137550 UEG0014S
8L4290 SHUT-OFF ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-0584 Y [1] SHUT-OFF GROUP  
    (See Separate Illustration)
2. 7L-4847 C [1] COVER  
3. 2L-3402 [1] SWITCH  
4. 8H-7696 C [1] FITTING  
5. 3B-8822 [1] ELBOW  
6. 8M-2770 C [1] CLIP  
7. 7M-9564 C [1] HOSE ASSEM. (28" long overall)  
8. 3B-6552 C [1] ELBOW  
9. 6L-4715 [1] PLATE  
10. 0S-1613 [3] BOLT  
  3B-4504 [3] LOCKWASHER  
11. 3F-1240 C [1] GROMMET  
12. 2N-6955 [1] SWITCH  
13. 4F-8184 [1] BUSHING  
14. 5L-6435 [1] CONTACTOR (Water Temperature)  
  4L-1192 [1] WIRING GROUP  
  2L-8075 [21] TERMINAL (No. 8 Screw)  
  2L-8081 [2] TERMINAL (1/2" Screw)  
  2L-8074 [4] TERMINAL (No. 10 Screw)  
  2L-8065 [6] TERMINAL (.164" Hole Dia.)  
  2L-8079 [2] TERMINAL (3/8" Screw)  
    (Use with No. 14 Wire)
  4S-8787 H WIRE 480"  
  8L-8413 [50] TIE (5.5" long)  
  2L-9724 [4] CLIP  
  [1] WIRING DIAGRAM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE FOOT
 

#UEG0014S0266
 

3N-3162: OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT

3N3162 OIL PRESSURE AND WATER TEMPERATURE
SHUT-OFF ARRANGEMENT--12 Volt
FOR USE WITH WOODWARD GOVERNOR
2N8902 Shut-Off parts are shown on Page 44D
c203223 UEG0014S
3N3162 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-8902 Y [1] SHUT-OFF GROUP  
    (Separate Illustration)
2. 4F-8184 [1] BUSHING  
3. 2L-3402 [1] SWITCH  
4. 5L-6435 [1] CONTACTOR (water temperature)  
5. 3B-9400 [1] FITTING  
6. 3B-7264 [1] NIPPLE  
7. 3N-7233 C [1] HOSE ASSEM. 22 in.(558.80 mm)  
8. 3B-6552 [1] ELBOW  
9. 6L-4715 [1] PLATE  
10. 0S-1613 [3] BOLT  
  3B-4504 [3] LOCKWASHER  
11. 2N-6955 [1] SWITCH  
  4L-1192 [1] WIRING GROUP  
  2L-8075 [21] TERMINAL (no. 8 screw)  
  2L-8081 [2] TERMINAL .50 in.(12.70 mm) screw  
  2L-8074 [4] TERMINAL (no. 10 screw)  
  2L-8065 J [6] TERMINAL .164 in.(4.17 mm) hole dia.  
  2L-8079 [2] TERMINAL .375 in.(9.52 mm) screw  
    (Use With No. 14 Wire)
  5P-0497 CH WIRE 121.92 dm(480 in.)  
  8L-8413 [50] TIE 5.5 in.(139 mm) long  
  2L-9724 [4] CLIP  
  [1] WIRING DIAGRAM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  J   NOT SHOWN
  H   ORDER BY THE DECIMETRE
 

#UEG0014S0267
 

3N-3156: OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT

3N3156 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
FOR USE WITHOUT WOODWARD GOVERNOR
3N583 Shut-Off parts are shown on Page 44C
c203222 UEG0014S
3N3156 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-0583 Y [1] SHUT-OFF GROUP  
    (Separate Illustration)
2. 4F-8184 [1] BUSHING  
3. 2L-3402 [1] SWITCH  
4. 5L-6435 [1] CONTACTOR (water temperature)  
5. 3B-9400 [1] FITTING  
6. 3B-7264 [1] NIPPLE  
7. 3N-7233 C [1] HOSE ASSEM. 22 in.(558.80 mm)  
8. 3B-6552 [1] ELBOW  
9. 6L-4715 [1] PLATE  
10. 0S-1613 [3] BOLT  
  3B-4504 [3] LOCKWASHER  
11. 2N-6955 [1] SWITCH  
  4L-1192 [1] WIRING GROUP  
  2L-8075 [21] TERMINAL (no. 8 screw)  
  2L-8081 [2] TERMINAL .50 in.(12.70 mm) screw  
  2L-8074 [4] TERMINAL (no. 10 screw)  
  2L-8065 J [6] TERMINAL .164 in.(4.17 mm) hole dia.  
  2L-8079 [2] TERMINAL .375 in.(9.52 mm) screw  
    (Use With No. 14 Wire)
  5P-0497 H WIRE 121.92 dm(480 in.)  
  8L-8413 [50] TIE 5.5 in.(139 mm)long  
  2L-9724 [4] CLIP  
  [1] WIRING DIAGRAM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  J   NOT SHOWN
  H   ORDER BY THE DECIMETRE
 

#UEG0014S0268
 

3N-6385: CONTACTOR GP-OVERSPEED

3N6385 OVERSPEED CONTACTOR GROUP
FOR USE WITH SAFETY SHUT-OFF
c141474 UEG0014S
3N6385 CONTACTOR GP-OVERSPEED Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4560 [2] NIPPLE-PLUG  
2. 5M-1822 [3] WASHER  
 

#UEG0014S0269
 

3N-7725: CONTACTOR MOUNTING GROUP

3N7725 CONTACTOR MOUNTING GROUP
FOR USE WITH SHUT-DOWN CONTACTORS
c147801 UEG0014S
3N7725 CONTACTOR MOUNTING GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-6245 [1] PLATE  
2. 0S-1613 [3] BOLT  
  3B-4504 [3] LOCKWASHER  
3. 7M-9222 [1] HOSE ASSEM. (14 in. long)  
4. 004-4914 [1] TEE  
5. 3B-6552 [1] ELBOW  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Installation Instructions For Turbocharger Bearing Kit
1984/08/08
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps
1977/06/29
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage
1977/12/14
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Hole in the Turbine Housing of the Turbocharger {1052}
2006/06/26
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W716 Turbocharger Cartridge Repair Kit{1053}
2W716 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W720 Turbocharger Cartridge Repair Kit{1053}
2W720 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger<BR> (AiResearch T1210 and T1224 for D330C and D333C)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (AiResearch T1210 and T1224 for 3304 and 3306)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (AiResearch T04B91)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger Impeller Installation<BR> (AiResearch Only)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (AiResearch TV61)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (AiResearch TW61)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (AiResearch T1210, T1224, and T1226)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger Impeller Installation
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (Schwitzer F444, 4LF504 and E Models)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (Schwitzer 3LM)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger Shield
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger Shield
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger (Airesearch T12)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger (Airesearch T18)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger (Airesearch TV81)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger (Airesearch TW61)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger (Schwitzer F444, 4L504 and E Models)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Turbocharger (Schwitzer 3LM)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1981/10/12
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3304 :

TURBO GP
8S-4590 TURBO GP
TURBO GP
8S-4590 TURBO GP
EXHAUST MANIFOLD WATER SHIELD GROUP
7L-0429 EXHAUST MANIFOLD WATER SHIELD GROUP
EXHAUST MANIFOLD WATER SHIELD GROUP
7L-0429 EXHAUST MANIFOLD WATER SHIELD GROUP
EXHAUST MANIFOLD WATER SHIELD GROUP
7L-0429 EXHAUST MANIFOLD WATER SHIELD GROUP
EXHAUST MANIFOLD WATER SHIELD GROUP
7L-0429 EXHAUST MANIFOLD WATER SHIELD GROUP
EXPANSION TANK AND WATER LINES GROUP
1N-5919 EXPANSION TANK AND WATER LINES GROUP
EXPANSION TANK AND WATER LINES GROUP
1N-5919 EXPANSION TANK AND WATER LINES GROUP
OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
8L-4290 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
OIL PRESSURE AND WATER TEMPERATURE SAFETY CONTACTOR GROUP
5L-8979 OIL PRESSURE AND WATER TEMPERATURE SAFETY CONTACTOR GROUP
OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
8L-4290 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
CONTACTOR GP-OVERSPEED
7L-7367 CONTACTOR GP-OVERSPEED
SHUT-OFF ARRANGEMENT
8L-4290 SHUT-OFF ARRANGEMENT
OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
3N-3162 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
3N-3156 OIL PRESSURE AND WATER TEMPERATURE SHUT-OFF ARRANGEMENT
CONTACTOR GP-OVERSPEED
3N-6385 CONTACTOR GP-OVERSPEED

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.