AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D330C MARINE ENGINE 05B00001-01196 ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



MARINE ENGINE D330C MARINE ENGINE 05B
 D330C MARINE ENGINE 05B00001-01196 UEG0017S D330C 05B   (1968)

Parts group D330C:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
ALTERNATOR ASSEMBLY
8L-5003 ALTERNATOR ASSEMBLY
8L5003 ALTERNATOR ASSEMBLY--24 Volt, 35 Ampere
Part of Alternator & Drives shown on Pages 39, 49 & 49A
For Field Replacement order 3N1380 shown on Page 38C
3N-1380 ALTERNATOR ASSEMBLY
3N1380 ALTERNATOR ASSEMBLY--24 Volt--Field Installation
Replaced by 3N1381 Alternator Assembly shown below
3N-1381 ALTERNATOR ASSEMBLY
3N1381 ALTERNATOR ASSEMBLY--24 Volt--Field Installation
ALTERNATOR AND DRIVE
ALTERNATOR AND DRIVE
ALTERNATOR AND DRIVE--24 Volt, 35 Ampere
Serial No. 5B1 to 5B503 inclusive
REGULATOR ASSEMBLY
6L-5657 REGULATOR ASSEMBLY
6L5657 REGULATOR ASSEMBLY--24 Volt, 60 Ampere
Part of 8L9303 and 8L9304 Alternator Groups
shown on Pages 48B through 48C
ALTERNATOR GROUP
8L-9303 ALTERNATOR GROUP
8L9303 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 1
6L5657 Regulator and 5L6468 Alternator parts are shown
on Pages 48A and 48D
ALTERNATOR GROUP
8L-9303 ALTERNATOR GROUP
8L9303 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 2
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 48A and 48D
ALTERNATOR GROUP
8L-9303 ALTERNATOR GROUP
8L9303 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 3
6L5657 Regulator and 5L6468 Alternator
parts are shown on Pages 48A and 48D
ALTERNATOR GROUP
8L-9304 ALTERNATOR GROUP
8L9304 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 1
FOR USE WITH FRONT POWER TAKE-OFF
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 48A and 48D
ALTERNATOR GROUP
8L-9304 ALTERNATOR GROUP
8L9304 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 2
FOR USE WITH FRONT POWER TAKE-OFF
6L5657 Regulator and 5L6468 Alternator parts
are shown on Pages 48A and 48D
ALTERNATOR GROUP
8L-9304 ALTERNATOR GROUP
8L9304 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 3
FOR USE WITH FRONT POWER TAKE-OFF
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 48A and 48D
ALTERNATOR ASSEMBLY
5L-6468 ALTERNATOR ASSEMBLY
5L6468 ALTERNATOR ASSEMBLY--24 Volt, 60 Ampere
Part of 8L9303 and 8L9304 Alternator Groups shown on Pages 48B and 48C
ALTERNATOR AND DRIVE GROUP
8L-5228 ALTERNATOR AND DRIVE GROUP
8L5228 ALTERNATOR AND DRIVE GROUP--24 Volt, 35 Ampere--Type 1
FOR USE WITH FRONT POWER TAKE-OFF
8L5003 Alternator parts are shown on Page 38B
ALTERNATOR GROUP
8L-5228 ALTERNATOR GROUP
8L5228 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 2
FOR USE WITH FRONT POWER TAKE-OFF. 2N6397 Alternator parts are shown on Page 48G
ALTERNATOR AS
2N-6397 ALTERNATOR AS
2N6397 ALTERNATOR ASSEMBLY--24 Volt, 35 Ampere
Part of 3N1380 Alternator Assembly and 8L5228, 1N9932 Alternator Groups shown
on Pages 38C, 48E, 48F, 49A-2 & 49A-3. For Field Replacement order 2N6398 shown
on Page 49-2
ALTERNATOR GROUP
8L-5228 ALTERNATOR GROUP
8L5228 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 3
FOR USE WITH FRONT POWER TAKE-OFF
2N6397 Alternator parts are shown on Page 48G
ALTERNATOR GROUP
8L-5228 ALTERNATOR GROUP
8L5228 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 4
FOR USE WITH FRONT POWER TAKE-OFF
2N6397 Alternator parts are shown on Page 48G
ALTERNATOR AS
2N-6398 ALTERNATOR AS
2N6398 ALTERNATOR GROUP--24 Volt, 35 Ampere
Part of 3N1381 Alternator Assembly listed on Page 38C
Provides Field Replacement for 2N6397 shown on Page 48G
ALTERNATOR GROUP
1N-9932 ALTERNATOR GROUP
1N9932 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 1
8L5003 Alternator parts are shown on Page 38B
ALTERNATOR GROUP
1N-9932 ALTERNATOR GROUP
1N9932 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 2
8L5003 Alternator parts are shown on Page 38B
ALTERNATOR GROUP
1N-9932 ALTERNATOR GROUP
1N9932 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 3
2N6397 Alternator parts are shown on Page 48G
ALTERNATOR GROUP
1N-9932 ALTERNATOR GROUP
1N9932 ALTERNATOR GROUP--24 Volt, 35 Ampere--Type 4
2N6397 Alternator parts are shown on Page 48G
ALTERNATOR GROUP
1N-9935 ALTERNATOR GROUP
1N9935 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 2
FOR USE WITHOUT FRONT POWER TAKE-OFF. For 30 Volt
application, substitute 6L5658 Regulator for 6L5397 Regulator.
5L1243 Alternator, 6L5397 and 6L5658 Regulator parts are
shown on Pages 49D and 49F
ALTERNATOR GROUP
1N-9935 ALTERNATOR GROUP
1N9935 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 3
FOR USE WITHOUT FRONT POWER TAKE-OFF
For 30 Volt Application, substitute 6L5658 Regulator for 6L5397 Regulator
5L1243 Alternator, 6L5397 and 6L5658 Regulator parts are shown on Pages 49D and 49F
ALTERNATOR GROUP
1N-9935 ALTERNATOR GROUP
1N9935 ALTERNATOR GROUP--32 Volt, 60 Ampere-Type 1
FOR USE WITHOUT FRONT POWER TAKE-OFF. For 30 Volt application,
substitute 6L5658 Regulator for 6L5397 Regulator. 5L1243 Alternator,
6L5397 & 6L5658 Regulator parts are shown on Pages 49D & 49F
ALTERNATOR GROUP
1N-9936 ALTERNATOR GROUP
1N9936 ALTERNATOR GROUP--32 Volt, 60 Ampere-Type 1
FOR USE WITH FRONT POWER TAKE-OFF. For 30 Volt application,
substitute 6L5658 Regulator for 6L5397 Regulator. 5L1243 Alternator,
6L5397 & 6L5658 Regulator parts are shown on Pages 49D & 49F
ALTERNATOR GROUP
1N-9936 ALTERNATOR GROUP
1N9936 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 2
FOR USE WITH FRONT POWER TAKE-OFF. For 30 Volt
application, substitute 6L5658 Regulator for 6L5397 Regulator.
5L1243 Alternator, 6L5397 & 6L5658 Regulator parts are shown on
Pages 49D & 49F
ALTERNATOR GROUP
1N-9936 ALTERNATOR GROUP
1N9936 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 3
FOR USE WITH FRONT POWER TAKE-OFF. For 30 Volt application,
substitute 6L5858 Regulator for 6L5397 Regulator. 5L1243 Alternator, 6L5397
and 6L5658 Regulator parts are shown on Pages 49D and 49F
ALTERNATOR AS
5L-1243 ALTERNATOR AS
5L1243 ALTERNATOR ASSEMBLY--32 Volt, 60 Ampere
Part of 1N9935 and 1N9936 Alternator Groups shown on Pages 49B, 49C, 49C-1 & 49C-2
6L-5397 REGULATOR ASSEMBLY
6L5397 REGULATOR ASSEMBLY--32 Volt, 60 Ampere
Part of 1N9935 & 1N9936 Alternator Groups shown on Pages 49B & 49C
6L5658 REGULATOR ASSEMBLY--30 Volt, 60 Ampere
For use with 1N9935 & 1N9936 Alternator Groups shown on Pages 49B & 49C
REGULATOR ASSEMBLY
6L-5658 REGULATOR ASSEMBLY
6L5397 REGULATOR ASSEMBLY--32 Volt, 60 Ampere
Part of 1N9935 & 1N9936 Alternator Groups shown on Pages 49B & 49C
6L5658 REGULATOR ASSEMBLY--30 Volt, 60 Ampere
For use with 1N9935 & 1N9936 Alternator Groups shown on Pages 49B & 49C
BATTERY GP
BATTERY GP
1H-1342 BATTERY GP
1H1342 BATTERY GROUP--32 Volt, 200 Ampere Hours--Type 2
FOR USE BETWEEN 0 DEGREE AND 30 DEGREES FAHRENHEIT TEMPERATURES
BATTERY GP
2N-1943 BATTERY GP
2N1943 BATTERY GROUP--30 Volt, 172 Ampere Hours
FOR USE BETWEEN 10 DEGREES and 30 DEGREES FAHRENHEIT
TEMPERATURES
BATTERY GP
1H-1342 BATTERY GP
1H1342 BATTERY GROUP--32 Volt, 200 Ampere Hours--Type 1
FOR USE BETWEEN 0 DEGREE and 30 DEGREES FAHRENHEIT
TEMPERATURES
BATTERY GP
7L-7870 BATTERY GP
7L7870 BATTERY GROUP--24 VOLT, 120 AMPERE HOURS
ONLY SEPARATE PARTS SERVICED
BATTERY GP
7L-7871 BATTERY GP
7L7871 BATTERY GROUP--24 VOLT, 172 AMPERE HOURS
ONLY SEPARATE PARTS SERVICED
BATTERY GP
7L-7872 BATTERY GP
7L7872 BATTERY GROUP--24 Volt, 220 Ampere Hours
ONLY SEPARATE PARTS SERVICED
CONTACTOR GP
SAFETY CONTACTOR GROUP
5L-9879 SAFETY CONTACTOR GROUP
5L9879 SAFETY CONTACTOR GROUP--Oil Pressure and Water Temperature
CONTACTOR GP-OVERSPEED
7L-7367 CONTACTOR GP-OVERSPEED
7L7367 OVERSPEED SAFETY CONTACTOR GROUP
FOR USE WITH TACHOMETER DRIVE GROUP
CONTACTOR GP
3N-9595 CONTACTOR GP
3N9595 CONTACTOR GROUP
AN ATTACHMENT
GLOW PLUG GP
STARTING AID GLOW PLUG GROUP
1N-9122 STARTING AID GLOW PLUG GROUP
1N9122 STARTING AID GLOW PLUG GROUP-24 Volt--Type 1
Effective with Serial No. 5B632
STARTING AID GLOW PLUG GROUP
1N-9120 STARTING AID GLOW PLUG GROUP
1N9120 STARTING AID GLOW PLUG GROUP--32 Volt--Type 1
Effective with Serial No. 5B632
GLOW PLUG GROUP
1N-9120 GLOW PLUG GROUP
1N9120 GLOW PLUG GROUP--32 Volt--Type 2
Serial No. 5B632-Up
STARTING AID GLOW PLUG GROUP
1N-9122 STARTING AID GLOW PLUG GROUP
1N9122 STARTING AID GLOW PLUG GROUP--24 Volt--Type 2
Serial No. 5B632-Up
SHUTOFF GP
SOLENOID SHUT-OFF GROUP
8L-4289 SOLENOID SHUT-OFF GROUP
8L4289 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 5B1 to 5B455, 5B457 to 5B461 and 5B463 to 5B465 inclusive
SOLENOID SHUT-OFF GROUP
5L-8984 SOLENOID SHUT-OFF GROUP
5L8984 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 5B456, 5B462 and 5B466 to 5B503 inclusive
Also available as Attachment effective with Serial No. 5B504
Only separate parts serviced. When complete Group is required
order 3N584
SHUT-OFF GP-SOLENOID
3N-0584 SHUT-OFF GP-SOLENOID
3N584 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 5B504-Up
AN ATTACHMENT
SOLENOID GP
SOLENOID SHUT-OFF GROUP
8L-4289 SOLENOID SHUT-OFF GROUP
8L4289 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 5B1 to 5B455, 5B457 to 5B461 and 5B463 to 5B465 inclusive
SOLENOID SHUT-OFF GROUP
5L-8984 SOLENOID SHUT-OFF GROUP
5L8984 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 5B456, 5B462 and 5B466 to 5B503 inclusive
Also available as Attachment effective with Serial No. 5B504
Only separate parts serviced. When complete Group is required
order 3N584
SHUT-OFF GP-SOLENOID
3N-0584 SHUT-OFF GP-SOLENOID
3N584 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 5B504-Up
AN ATTACHMENT
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
4M1812 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 2S900 Starting Motor Assembly shown on Pages 42, 42B & 43A
SWITCH AS-SOLENOID
6N-5123 SWITCH AS-SOLENOID
6N5123 SOLENOID SWITCH ASSEMBLY
Serial No. 5B504-Up
Part of 4N3347 Motor Group shown on Page 43C
SWITCH AS-SOLENOID
5L-8595 SWITCH AS-SOLENOID
5L8595 SOLENOID SWITCH ASSEMBLY
Part of 6L7894 Starting Motor Assembly shown on Page 45B
STARTING AID GP
STARTING AID GLOW PLUG GROUP
1N-9122 STARTING AID GLOW PLUG GROUP
1N9122 STARTING AID GLOW PLUG GROUP-24 Volt--Type 1
Effective with Serial No. 5B632
STARTING AID GLOW PLUG GROUP
1N-9120 STARTING AID GLOW PLUG GROUP
1N9120 STARTING AID GLOW PLUG GROUP--32 Volt--Type 1
Effective with Serial No. 5B632
GLOW PLUG GROUP
1N-9120 GLOW PLUG GROUP
1N9120 GLOW PLUG GROUP--32 Volt--Type 2
Serial No. 5B632-Up
STARTING AID GLOW PLUG GROUP
1N-9122 STARTING AID GLOW PLUG GROUP
1N9122 STARTING AID GLOW PLUG GROUP--24 Volt--Type 2
Serial No. 5B632-Up
STARTING MOTOR GP
ELECTRIC STARTING MOTOR
8L-4048 ELECTRIC STARTING MOTOR
8L4048 ELECTRIC STARTING MOTOR--24 Volt, 35 Ampere--Type 1
Serial No. 5B1 to 5B503 inclusive
2S900 Motor parts are shown on Pages 42 and 43
AN ATTACHMENT
ELECTRIC STARTING MOTOR
8L-4048 ELECTRIC STARTING MOTOR
8L4048 ELECTRIC STARTING MOTOR--24 Volt, 35 Ampere--Type 2
Serial No. 5B504-Up. 2S900 Motor parts are shown on Pages 42 and 43
AN ATTACHMENT
ELECTRIC STARTING MOTOR GROUP
8L-4048 ELECTRIC STARTING MOTOR GROUP
8L4048 ELECTRIC STARTING MOTOR GROUP--24 Volt, 35 Ampere--Type 3
Serial No. 5B504-Up. 3L6655 Wiring Kit and 2S900 Motor parts are shown on Pages 41D, 42 through 43A
AN ATTACHMENT
ELECTRIC STARTING MOTOR GROUP
8L-4048 ELECTRIC STARTING MOTOR GROUP
8L4048 ELECTRIC STARTING MOTOR GROUP--24 Volt, 35 Ampere--Type 4
Serial No. 5B504-Up. 3L6655 Wiring Kit and 4N3347 Motor parts are shown on Pages 41D, 43C and 43D
AN ATTACHMENT
STARTING MOTOR AS
2S-0900 STARTING MOTOR AS
2S900 STARTING MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 1
Part of Electric Starting Motor shown on Page 41
4M1812 Switch Assembly parts are shown on Page 44
STARTING MOTOR AS
2S-0900 STARTING MOTOR AS
2S900 STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 1
Part of Electric Starting Motor shown on Page 41
STARTING MOTOR AS
2S-0900 STARTING MOTOR AS
2S900 STARTING MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 2
Part of Electric Starting Motor shown on Page 41
4M1812 Switch parts are shown on Page 44
STARTING MOTOR AS
2S-0900 STARTING MOTOR AS
2S900 STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 2
Part of Electric Starting Motor shown on Page 41
STARTING MOTOR AS
2S-0900 STARTING MOTOR AS
2S900 STARTING MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 3
Part of 8L4048 Electric Starting Motor shown on Page 41
4M1812 Switch parts are shown on Page 44
STARTING MOTOR AS
2S-0900 STARTING MOTOR AS
2S900 STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 3
Part of Electric Starting Motor shown on Page 41
MOTOR GROUP
4N-3347 MOTOR GROUP
4N3347 MOTOR GROUP--Part 1 of 2
Serial No. 5B504-Up
Part of 8L4048 Electric Starting Motor Group shown on Page 41B. 6N5123 Switch parts are shown on Page 44A
MOTOR GROUP
4N-3347 MOTOR GROUP
4N3347 MOTOR GROUP--Part 2 of 2
Serial No. 5B504-Up
Part of 8L4048 Electric Starting Motor Group shown on Page 41B
AIR STARTING MOTOR GROUP
8L-4047 AIR STARTING MOTOR GROUP
8L4047 AIR STARTING MOTOR GROUP--18 H.P.--Type 1
8L5052 Motor and 3L9921 Valve parts are shown on Pages 44B, 45 & 46
AIR STARTING MOTOR GROUP
8L-4047 AIR STARTING MOTOR GROUP
8L4047 AIR STARTING MOTOR GROUP--18 H.P.--Type 2
Replaced by 4N5712 Air Starting Motor Group shown on Page 44A-1
8L5052 Motor and 3L9921 Valve parts are shown on Pages 44B, 45 & 46
STARTING MOTOR GP-AIR
4N-5712 STARTING MOTOR GP-AIR
4N5712 AIR STARTING MOTOR GROUP
4N4370 Air Motor parts are shown on Page 44A-2
MOTOR GP-AIR
4N-4370 MOTOR GP-AIR
4N4370 AIR MOTOR GROUP
Part of 4N5712 Air Starting Motor Group shown on Page 44A-1
STARTING MOTOR ASSEMBLY
8L-5052 STARTING MOTOR ASSEMBLY
8L5052 STARTING MOTOR ASSEMBLY--18 H.P.--Type 2
Part of 8L4047 Air Starting Motor Group shown on Pages 44 and 44A
STARTING MOTOR ASSEMBLY
8L-5052 STARTING MOTOR ASSEMBLY
8L5052 STARTING MOTOR ASSEMBLY--18 H.P.-Type 1
PART OF 8L4047 AIR STARTING MOTOR GROUP
MOTOR AS-STARTING
6L-7894 MOTOR AS-STARTING
6L7894 STARTING MOTOR ASSEMBLY--32 Volt--Part 1 of 2-Type 1
Part of 1N9880 Electric Starting Motor Group shown on Page 45C
MOTOR AS-STARTING
6L-7894 MOTOR AS-STARTING
6L7894 STARTING MOTOR ASSEMBLY--32 Volt--Part 2 of 2-Type 1
Part of 1N9880 Electric Starting Motor shown on Page 45C
5L8595 Switch parts are shown on Page 45D
MOTOR AS-STARTING
6L-7894 MOTOR AS-STARTING
6L7894 STARTING MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 2
Part of 1N9880 Electric Starting Motor Group shown on Pages 45C, 45C-1 and 45C-2
5L8595 Switch parts are shown on Page 45D
MOTOR AS-STARTING
6L-7894 MOTOR AS-STARTING
6L7894 STARTING MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 2
Part of 1N9880 Electric Starting Motor Group shown on Pages 45C and 45C-1
ELECTRIC STARTING MOTOR GROUP
1N-9880 ELECTRIC STARTING MOTOR GROUP
1N9880 ELECTRIC STARTING MOTOR GROUP--32 Volt-Type 1
6L7894 Motor parts are shown on Pages 45A and 45B
ELECTRIC STARTING MOTOR GROUP
1N-9880 ELECTRIC STARTING MOTOR GROUP
1N9880 ELECTRIC STARTING MOTOR GROUP--32 Volt--Type 2
6L7894 Motor parts are shown on Pages 45A through 45B-2
ELECTRIC STARTING MOTOR GROUP
1N-9880 ELECTRIC STARTING MOTOR GROUP
1N9880 ELECTRIC STARTING MOTOR GROUP--32 Volt--Type 3
3L6655 Wiring Kit and 6L7894 Motor parts are shown on Pages 41D, 45A and 45B
AN ATTACHMENT
WHISTLE VALVE ASSEMBLY
3L-9921 WHISTLE VALVE ASSEMBLY
3L9921 WHISTLE VALVE ASSEMBLY
PART OF 8L4047 AIR STARTING MOTOR GROUP SHOWN ON PAGE 44
AIR RECEIVER GP
1L-5010 AIR RECEIVER GP
1L5010 AIR RECEIVER GROUP--10.5 CUBIC FOOT CAPACITY
8L-8647 HARDWARE GROUP
8L8647 HARDWARE GROUP--Type 1
PART OF HYDRAULIC STARTING SYSTEM
HARDWARE GROUP
8L-8647 HARDWARE GROUP
8L8647 HARDWARE GROUP--Type 2
Part of Hydraulic Starting System listed on Page 53
HYDRAULIC STARTING SYSTEM
HYDRAULIC STARTING SYSTEM
SWITCH GP
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
4M1812 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 2S900 Starting Motor Assembly shown on Pages 42, 42B & 43A
SWITCH AS-SOLENOID
6N-5123 SWITCH AS-SOLENOID
6N5123 SOLENOID SWITCH ASSEMBLY
Serial No. 5B504-Up
Part of 4N3347 Motor Group shown on Page 43C
SWITCH AS-SOLENOID
5L-8595 SWITCH AS-SOLENOID
5L8595 SOLENOID SWITCH ASSEMBLY
Part of 6L7894 Starting Motor Assembly shown on Page 45B
TANK GP-AIR
AIR RECEIVER GP
1L-5010 AIR RECEIVER GP
1L5010 AIR RECEIVER GROUP--10.5 CUBIC FOOT CAPACITY
WIRING GP
3L-6655 WIRING GP
3L6655 WIRING KIT
Part of 8L4048 and 1N9880 Electric Starting Motor Groups shown on Pages 40, 41A,
41B and 45C-2. Only separate parts serviced

Information:

(For parts list, see above)

Service Magazine
New Mounting Group For Overspeed Switch{7410}
1981/05/18
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Time Delay Conversion Groups Available{7400}
1982/08/23
Improvements To Generator-Mounted Control Panels{4450,7400}
1982/10/25
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Engine News
New Regulator And Field Coil Assemblies Used
1981/11/25
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Identification Of External Terminals On Alternators
1987/04/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Zinc Plated Pulley Prevent Corrosion In Marine Applications {1385,1425}
1996/09/23
Spacers Added To Alternator Group To Improve The Mounting
1977/07/13
New Front Housing Has Stronger Boss For Alternator
1977/10/12
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternators (5L1243 32V And 5L6468 24V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternators (6L6024 And 7L6414 24V, 9L184112V 52A)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternators (8L5003 24V, 8L5006 24V, 2N6397 24V, 2N6398 24V, 2N6396 12V, 2N6395 12V, 8L5412 12V And 8L5410 12V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators (6L5397 And 6L3432 32V, 2N954 And 6L3412 12V, 6L5657 24V, 6L3434 24V, 6L5658 30V, 6L3430 30V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators (8L5004 24V, 2N5882 24V, 2N5882 24V, 2N7279 24V, 2N7278 12V, 8L5413 12V And 2N5881 12V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternators (2N6397, 2N6398 And 2N7759)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Alternators (4N3986 And 4N3987)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Alternators (1N9406 And 5S9088)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Alternators (9L5938)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Alternator
26SI Series Alternator
Alternator
30SI Series and 34SI Series Alternator
Systems Operation
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Disassembly and Assembly
Alternator
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Spacers Added To Alternator Group To Improve The Mounting{1405}
1977/08/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Engine News
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Specifications
Circuit Breaker
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Engine News
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Specifications
Overspeed Contactor Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Contactor Switches (9F7837 and 8L4537, 9F7837, 8L4537)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil pressure Contactor Switches (2N6955, 3N531 and 2N7124, 2N6955 and 3N531, 2N7124)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Water Temperature Contactor Switches
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Overspeed Contactor Group
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
Procedure for Obtaining Full Speed On Marine Propulsion Engines with an Electronic Control Module {1901}
Procedure for Obtaining Full Speed On Marine Propulsion Engines with an Electronic Control Module {1901}
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONS TO THE ELECTRONIC CONTROL UNIT PRODUCT LINE
CAT REMAN ANNOUNCES ADDITIONS TO THE ELECTRONIC CONTROL UNIT PRODUCT LINE
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONS TO THE ELECTRONIC CONTROL UNIT PRODUCT LINE
CAT REMAN ANNOUNCES ADDITIONS TO THE ELECTRONIC CONTROL UNIT PRODUCT LINE
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Mounting Group For Overspeed Switch{7410}
1981/05/18
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
Specifications
Glow Plug Positioning
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Specifications
Silicon Controlled Ignition System<BR> (Solid State Magneto)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Ignition System Timing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Engine News
New Engine Timing Indicator Group Available
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Specifications
Magneto Timing Setting<BR> (Solid State Magneto)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Engine News
New Mounting Group For Overspeed Switch
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
&quot;Ugly's Electrical-References&quot; SEBD0983, Now Available
1990/06/01
Wiring Harness Conduit Component Sizes {1408}
1995/02/01
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Safety Vent Caps For Caterpillar Batteries
1977/07/13
New Starter Motors Have Solenoid On Top Of Starter
1978/03/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
Improvement Made To Solenoid In Electric Shut-Off Group
1978/11/15
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Alternators (5L1243 32V And 5L6468 24V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternators (6L6024 And 7L6414 24V, 9L184112V 52A)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternators (8L5003 24V, 8L5006 24V, 2N6397 24V, 2N6398 24V, 2N6396 12V, 2N6395 12V, 8L5412 12V And 8L5410 12V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators (6L5397 And 6L3432 32V, 2N954 And 6L3412 12V, 6L5657 24V, 6L3434 24V, 6L5658 30V, 6L3430 30V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator Regulators (8L5004 24V, 2N5882 24V, 2N5882 24V, 2N7279 24V, 2N7278 12V, 8L5413 12V And 2N5881 12V)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starting Motors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Shut Off Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Overspeed Contactor Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Shutoff Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Magnetic Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Contactor Switches (9F7837 and 8L4537, 9F7837, 8L4537)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil pressure Contactor Switches (2N6955, 3N531 and 2N7124, 2N6955 and 3N531, 2N7124)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Hydraulic Starting System
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Air Starting Motor<BR> (7L8425, 8L5052, 6L4532)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Pressure Switches
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Shutoff<BR> (8L4908)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starting Motor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Water Temperature Contactor Switches
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Silicon Controlled Ignition System<BR> (Solid State Magneto)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Magneto Timing Setting<BR> (Solid State Magneto)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Ignition System Timing
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Starter
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Alternator
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14
New Mounting Group For Overspeed Switch{7410}
1981/05/18
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Improvements To Generator-Mounted Control Panels{4450,7400}
1982/10/25
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Improvement Made To Solenoid In Electric Shut-Off Group{1259}
1978/11/06
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Specifications
Sending Units For Water Temperature
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Sending Unit For Gear Oil Pressure
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Specifications
Sending Units For Water Temperature
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Sending Unit For Gear Oil Pressure
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Magnetic Pickup
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Engine News
New Time Delay Conversion Groups Available
1982/08/25
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improvement Made To Solenoid In Electric Shut-Off Group
1978/11/15
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}
Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}
Specifications
Shut Off Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Shutoff Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Shutoff<BR> (8L4908)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Shutoff Solenoid
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Water Temperature Shutoff Valve<BR> (4L7108)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Time Delay Conversion Groups Available{7400}
1982/08/23
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improvement Made To Solenoid In Electric Shut-Off Group{1259}
1978/11/06
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Adjust Bosch Solenoid If Replaced Or Reinstalled
1988/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
New Starter Motors Have Solenoid On Top Of Starter
1978/03/01
Improvement Made To Solenoid In Electric Shut-Off Group
1978/11/15
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Starter Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Shut Off Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Shutoff Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Solenoids
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Shutoff Solenoid
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Improvement Made To Solenoid In Electric Shut-Off Group{1259}
1978/11/06
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improvement Made To Solenoid In Electric Shut-Off Group{1259}
1978/11/06
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
Specifications
Glow Plug Positioning
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Engine Shuts Down Immediately After Start-Up {7400}
1985/10/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Bearing Used In Air Starting Motor
1982/09/22
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
New Starter Motors Have Solenoid On Top Of Starter
1978/03/01
New Starting Motors Used {1453}
2002/05/01
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starting Motors
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Solenoids
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Air Starting Motor<BR> (7L8425, 8L5052, 6L4532)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starting Air Regulating Valve
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starting Motor
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Motors (6L7894, 9L3597 And 2S900)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Starter Motors (4N3180, 7N6503 And 4N3181)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Starter Solenoids
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switches
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pressure Regulating Valve For Air Starting Motor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Air Starting Motor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Hydraulic Starting Motor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pressure Accumulator For Hydraulic Starter
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Charging Pump For Hydraulic Starter
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Hand Pump For Hydraulic Starter
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Starter
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Electric Starting Motor
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Bearing Used In Air Starting Motor {1451}
1982/09/13
New Start Switch Used {1416,1453}
1986/07/07
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Engine News
New Mounting Group For Overspeed Switch
1981/06/03
New Dual Speed Switch Is Now Available
1981/10/21
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Three Element Speed Switch Replaces Dual Element Speed Switch
1986/05/01
New Start Switch Used
1986/07/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group
1990/12/01
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Overspeed Contactor Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Magnetic Switch
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Contactor Switches (9F7837 and 8L4537, 9F7837, 8L4537)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Oil pressure Contactor Switches (2N6955, 3N531 and 2N7124, 2N6955 and 3N531, 2N7124)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Pressure Switches
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Water Temperature Contactor Switches
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Coolant Flow Switch
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switches
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Series Parallel Switches
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pressure Switch For Electric Service Meter
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pressure Switches (5L5500)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pressure Switches (2L3402 And 3L6306)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Pressure Switches (2N7744 And 4N4696)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Switch
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Switch<BR> (Time Delay)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Water Temperature Switches (5L6435 And 3N7529)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Water Temperature Switches (3N7442)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Oil Pressure Switch
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Electronic Speed Switch<BR> (3N7874 and 3N9595)
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
New Mounting Group For Overspeed Switch{7410}
1981/05/18
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Use Improved Start Switch In Most Applications{1416}
1982/01/11
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
New Start Switch Used {1416,1453}
1986/07/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Engine News
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Tool Operating Manual
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Specifications
Transformer<BR> (Solid State Magneto)
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Engine News
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Wiring Harness Conduit Component Sizes {1408}
1995/02/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/11/01
Special Instruction
Installation of 7W2743 Speed Switch Assembly{7427}
Installation of 7W2743 Speed Switch Assembly{7427}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group{1416}
1990/12/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
Magnetic Switches (Starter Relays) Improved
1988/03/01
Special Instruction
Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}
Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}
Service Magazine
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Failures of the Engine Vision on Marine Applications{1900, 7490}
Failures of the Engine Vision on Marine Applications{1900, 7490}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Horizontally Mounted Jacket Water Heater Now Used
1987/05/01
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONS TO THE ELECTRONIC CONTROL UNIT PRODUCT LINE
CAT REMAN ANNOUNCES ADDITIONS TO THE ELECTRONIC CONTROL UNIT PRODUCT LINE
Service Magazine
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2015/02/16
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Engine News
Wiring Harness Conduit Component Sizes {1408}
1995/02/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
Special Instruction
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.