AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7L5328 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3 Serial No. 38J188-Up 8L9409 Cylinder Block parts are shown on Page 24 D348


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

MARINE ENGINE D348 MARINE ENGINE 38J
 D348 MARINE ENGINE 38J00001-00192 UEG0018S D348 38J   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS GROUP
7L-5328 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
7L-5328 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
7L-5328 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK ASSEMBLY
7L-4418 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
7L-4418 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
 

#UEG0018S0070
 

7L-5328: CYLINDER BLOCK AND COVERS GROUP

7L5328 CYLINDER BLOCK AND COVERS GROUP--Side View--Part 3 of 3
Serial No. 38J188-Up
8L9409 Cylinder Block parts are shown on Page 24
c140481 UEG0018S
7L5328 CYLINDER BLOCK AND COVERS GROUP Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-4441 [1] PLATE ASSEM. (Front)  
  6H-0192 [7] STUD  
2. 4F-1450 [3] STUD  
3. 0S-1594 [82] BOLT  
4. 3B-4506 [82] LOCKWASHER  
5. 7L-5231 [1] PLATE ASSEM.  
  3S-7681 [1] GASKET  
6. 3S-7669 [12] TUBE ASSEM.  
7. 1S-5976 [12] SCREW  
8. 7M-7205 [12] LOCK  
9. 1D-4569 [14] BOLT  
10. 3B-4508 [15] LOCKWASHER  
11. 7L-5192 [1] GASKET  
12. 3S-7536 [1] GASKET  
13. 5S-9501 [2] COVER  
  7S-1073 [2] GASKET  
14. Y [1] BLOCK ASSEM.  
    (Separate Illustration)
15. 1B-4203 [4] NUT  
16. 5S-5276 [1] GASKET  
17. 7L-4440 [1] PLATE ASSEM. (Rear)  
  4H-5032 [1] STUD  
18. 2A-4791 [2] STUD  
19. 6H-0192 [10] STUD  
20. 7L-5193 [1] GASKET  
21. 2B-7411 [1] PLUG  
22. 8L-6149 [1] GASKET  
23. 2N-0214 C [1] BAFFLE  
24. 1A-7427 [2] LOCK  
25. 9S-4681 [2] COVER  
26. 7L-5199 [1] GASKET  
27. 5M-6213 [10] PLUG  
28. 1A-1460 [1] BOLT  
29. 7L-3249 [1] GASKET  
30. 0T-0320 [4] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0018S0071
 

7L-4418: CYLINDER BLOCK ASSEMBLY

7L4418 CYLINDER BLOCK ASSEMBLY--Type 1
Serial No. 38J1 to 38J107 inclusive. Part of Cylinder Block & Covers shown
on Page 22A. Note: For field replacement order 1N9067 Cylinder Block Group
c103450 UEG0018S
7L4418 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4507 [1] FERRULE  
2. 5M-6214 [1] PLUG  
3. 5S-6461 [2] DOWEL  
4. 5S-6663 [4] DOWEL  
5. 9H-5602 [2] DOWEL  
6. 1S-0521 [2] FERRULE  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
9. 2A-4492 [2] STUD  
10. 7M-4618 [38] STUD  
11. 2S-4680 [48] STUD (Marked Y)  
12. 2S-4129 [2] SHAFT  
13. 3F-6795 [6] DOWEL  
14. 1B-5170 [2] PLUG  
15. 2A-5349 [2] STUD  
16. 1A-0695 [1] PLUG  
17. 7L-5843 [1] BRACKET  
18. 2S-2339 [28] STUD  
  6B-6162 [28] NUT  
  4D-6419 [28] WASHER  
19. 6H-5800 [28] COTTER PIN  
20. 5S-6739 [6] CAP GROUP (Front & Intermediate)  
  5S-6743 [1] CAP GROUP (Rear)  
21. 5S-6742 [14] SHIM (3.32" Long)  
    (2 in each 5S6739 & 5S6743 Cap Group)
  5S-6741 [42] SHIM (3.01" Long)  
    (6 in each 5S6739 & 5S6743 Cap Group)
22. 4F-2609 [6] DOWEL  
    (Used with 5S6739 Cap Group)
  5B-5812 [1] DOWEL  
    (Used with 5S6743 Cap Group)
23. 0L-1021 [1] PLUG  
24. 2A-3576 [4] DOWEL  
25. 0L-0659 [4] STUD  
26. 3J-5390 [2] PLUG  
27. 3S-8313 [2] PLUG  
 

#UEG0018S0072
 

7L-4418: CYLINDER BLOCK ASSEMBLY

7L4418 CYLINDER BLOCK ASSEMBLY--Type 2
Serial No. 38J1 to 38J107 inclusive
Part of 7L5328 Cylinder Block and Covers Group shown on Page 22A
c153951 UEG0018S
7L4418 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4507 [1] FERRULE  
2. 5M-6214 [1] PLUG  
3. 5S-6461 [2] DOWEL  
4. 5S-6663 [4] DOWEL  
5. 9H-5602 [2] DOWEL  
6. 1S-0521 [2] FERRULE  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
9. 2A-4492 [2] STUD  
10. 7M-4618 [38] STUD  
11. 2S-4680 [48] STUD (marked Y)  
12. 2S-4129 [2] SHAFT  
13. 3F-6795 [6] DOWEL  
14. 1B-5170 [2] PLUG  
15. 2A-5349 [2] STUD  
16. 1A-0695 [1] PLUG  
17. 7L-5843 [1] BRACKET  
18. 2S-2339 [28] STUD  
  6B-6162 [28] NUT  
  4D-6419 [28] WASHER  
19. 6H-5800 [28] COTTER PIN  
20. 5S-5188 [6] CAP ASSEM. (Center Front & Intermediate)  
    (Each Includes)
21. 4F-2609 [1] DOWEL  
22. 1P-1230 [1] CAP GROUP (rear)  
    (Includes)
  1P-1226 [1] CAP ASSEM.  
    (Includes)
23. 5B-5812 [1] DOWEL  
24. 2H-1190 [4] DOWEL  
25. 2S-2838 [1] BEARING  
26. 9S-1162 [2] BEARING  
27. 0L-1021 [1] PLUG  
28. 2A-3576 [4] DOWEL  
29. 0L-0659 [4] STUD  
30. 3J-5390 [2] PLUG  
31. 5H-4279 [2] PLUG  
 

#UEG0018S0073
 

CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY-Type 1
Serial No. 38J108 to 38J137 inclusive. Part of Cylinder Block & Covers
shown on Page 22D. Note: For field replacement order 2N5691 Service
Block Group
c125538 UEG0018S
None CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4507 [1] FERRULE  
2. 5M-6214 [1] PLUG  
3. 5S-6461 [2] DOWEL  
4. 5S-6663 [4] DOWEL  
5. 2A-5349 [2] STUD (1.562" long)  
  2A-4492 [2] STUD (2.062" long)  
6. 1S-0521 [1] FERRULE  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
9. 9H-5602 [2] DOWEL  
10. 7M-4618 [38] STUD (8.68" long)  
11. 2S-4680 [48] STUD (17" long)  
12. 2S-4129 [2] SHAFT  
13. 3F-6795 [8] DOWEL  
14. 1B-5170 [2] PLUG  
15. 2A-3576 [4] DOWEL  
16. 1A-0695 [1] PLUG  
17. 1N-7086 [1] BRACKET  
18. 2S-4176 [28] STUD  
  6B-6162 [28] NUT  
  4D-6419 [26] WASHER  
19. 6H-5800 [28] COTTER PIN  
20. 5S-6739 [5] CAP GROUP (Front & Intermediate)  
  9S-1234 [1] CAP GROUP (Center)  
  5S-6743 [1] CAP GROUP (Rear)  
21. 5S-6742 [14] SHIM (3.32" long)  
    (2 in each 5S6739, 9S1234 & 5S6743 Group)
  5S-6741 [42] SHIM (3.01" long)  
    (6 in each 5S6739, 9S1234 & 5S6743 Group)
22. 4F-2609 [5] DOWEL  
    (1 in each 5S6739 Group)
23. 2H-1190 [4] DOWEL  
    (Part of 9S1234 Group)
24. 5B-5812 [2] DOWEL  
    (1 in each 9S1234 & 5S6743 Group)
25. 0L-0659 [4] STUD  
26. 3J-5390 [2] PLUG  
27. 5H-4279 [2] PLUG  
28. 0L-1021 [2] PLUG  
 

#UEG0018S0074
 

CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY--Type 2
Serial No. 38J108 to 38J137 inclusive. Part of Cylinder Block & Covers
shown on Page 22D. Note: For field replacement order 2N5691 Service
Block Group
c130570 UEG0018S
None CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4507 [1] FERRULE  
2. 5M-6214 [1] PLUG  
3. 5S-6461 [2] DOWEL  
4. 9S-4086 [4] DOWEL  
5. 2A-5349 [2] STUD (1.562" long)  
  2A-4492 [2] STUD (2.062" long)  
6. 1S-0521 [1] FERRULE  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
9. 9S-4087 [2] DOWEL  
10. 7M-4618 [38] STUD (8.68" long)  
11. 2S-4680 [48] STUD (17" long)  
12. 2S-4129 [2] SHAFT  
13. 3F-6795 [8] DOWEL  
14. 1B-5170 [2] PLUG  
15. 2A-3576 [4] DOWEL  
16. 1A-0695 [1] PLUG  
17. 1N-7086 [1] BRACKET  
18. 2S-4176 [28] STUD  
  6B-6162 [28] NUT  
  4D-6419 [26] WASHER  
19. 6H-5800 [28] COTTER PIN  
20. 5S-5188 [5] CAP ASSEM. (Front & Intermediate)  
  1P-1750 [1] CAP ASSEM. (Center)  
  1P-1230 [1] CAP GROUP (Rear)  
  1P-1226 [1] CAP ASSEM.  
  2S-2838 [1] BEARING (Main)  
  9S-1162 [2] BEARING (Thrust)  
21. 4F-2609 [5] DOWEL  
    (1 in each 5S5188 Assem.)
22. 2H-1190 [8] DOWEL  
    (4 in each 1P1750 & 1P1226 Assem.)
23. 5B-5812 [2] DOWEL  
    (1 in each 1P1750 & 1P1226 Assem.)
24. 0L-1021 [2] PLUG  
25. 0L-0659 [4] STUD  
26. 3J-5390 [2] PLUG  
27. 5H-4279 [2] PLUG  
 

#UEG0018S0075
 

8L-9409: CYLINDER BLOCK AS

8L9409 CYLINDER BLOCK ASSEMBLY
Serial No. 38J138 to 38J187 inclusive
Part of 7L5328 Cylinder Block & Covers Group shown on Pages 22G and 22K
c153949 UEG0018S
8L9409 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4507 [1] FERRULE  
2. 5M-6214 [1] PLUG  
3. 5S-6461 [2] DOWEL  
4. 9S-4086 [4] DOWEL  
5. 2A-5349 [2] STUD 1.562 in. (39.68 mm) long  
  2A-4492 [2] STUD 2.062 in. (52.39 mm) long  
6. 1S-0521 [1] FERRULE  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
9. 9S-4087 [2] DOWEL  
10. 7M-4618 [38] STUD 8.68 in. (22.04 mm) long  
11. 2S-4680 [48] STUD 17 in. (431.8 mm) long  
12. 2S-4129 [2] SHAFT  
13. 3F-6795 [8] DOWEL  
14. 1B-5170 [2] PLUG  
15. 2A-3576 [4] DOWEL  
16. 1A-0695 [1] PLUG  
17. 1N-7086 [1] BRACKET  
18. 9S-9752 [28] STUD  
  1A-5666 [28] NUT  
  4D-6419 [26] WASHER  
19. 0L-1021 [2] PLUG  
20. 5S-5188 [5] CAP ASSEM. (front & intermediate)  
    (Each Includes)
21. 4F-2609 [1] DOWEL  
22. 1P-1750 [2] CAP ASSEM. (center & rear)  
    (Each Includes)
23. 5B-5812 [1] PIN .4375 in. (11.12 mm) long  
24. 2H-1190 [4] DOWEL .687 in. (17.46 mm) long  
25. 0L-0659 [4] STUD  
26. 3J-5390 [2] PLUG  
27. 5H-4279 [2] PLUG  
 

#UEG0018S0076
 

8L-9409: CYLINDER BLOCK AS

8L9409 CYLINDER BLOCK ASSEMBLY
Serial No. 38J188-Up
Part of 7L5328 Cylinder Block and Covers Group shown on Page 22K-3
c153950 UEG0018S
8L9409 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-4507 [1] FERRULE  
2. 5M-6214 [1] PLUG  
3. 1P-6812 [2] STUD  
4. 9S-4086 [4] DOWEL  
5. 2A-5349 [2] STUD 1.562 in. (39.68 mm) long  
  0L-0654 [2] STUD 2.31 in. (58.80 mm) long  
6. 1S-0521 [1] FERRULE  
7. 5M-6213 [1] PLUG  
8. 4B-5387 [1] PLUG  
9. 9S-4087 [2] DOWEL  
10. 5H-4279 [2] PLUG  
11. 0L-0659 [4] STUD  
12. 2S-4129 [2] SHAFT  
13. 3F-6795 [8] DOWEL  
14. 1B-5170 [2] PLUG  
15. 2A-3576 [4] DOWEL  
16. 1A-0695 [1] PLUG  
17. 1N-7086 [1] BRACKET  
18. 9S-9752 [28] STUD  
  1A-5666 [28] NUT  
  4D-6419 [26] WASHER  
19. 0L-1021 [2] PLUG  
20. 5S-1588 [5] CAP ASSEM. (front & intermediate)  
    (Each Includes)
21. 4F-2609 [1] PIN .4375 in. (11.12 mm) long  
22. 1P-1750 [2] CAP ASSEM. (center & rear)  
    (Each Includes)
23. 5B-5812 [1] DOWEL .687 in.(17.46 mm) long  
24. 2H-1190 [4] DOWEL  
25. 3J-5390 [2] PLUG  
 

#UEG0018S0077
 

9S-2035: CRANKSHAFT GROUP

9S2035 CRANKSHAFT GROUP--Field Installation--Type 1
Serial No. 38J1 to 38J137 inclusive
c138246 UEG0018S
9S2035 CRANKSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2034 [1] CRANKSHAFT ASSEM.  
2. 3N-2110 [6] PLUG  
3. 4M-9480 [6] RING  
4. 5B-5821 [1] DOWEL  
5. 5S-0582 [1] GEAR (50 Teeth)  
6. 4B-3365 [1] DOWEL  
7. 2S-4071 [1] SEAL  
8. 9S-1162 [2] BEARING (Thrust)  
9. 9S-1234 [1] BEARING CAP GROUP  
  2H-1190 [4] DOWEL  
10. 5S-6741 [6] SHIM (Slotted)  
  5S-6742 [2] SHIM  
11. 5S-5812 [1] DOWEL  
12. 9S-0684 [7] BEARING (Main)  
 

#UEG0018S0078
 

9S-2035: CRANKSHAFT GROUP

9S2035 CRANKSHAFT GROUP--Field Installation--Type 2
Serial No. 38J1 to 38J137 inclusive
c138247 UEG0018S
9S2035 CRANKSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2003 C [1] CRANKSHAFT ASSEM.  
2. 3N-2110 [6] PLUG  
3. 4M-9480 [6] RING  
4. 5B-5821 [1] DOWEL  
5. 2P-4563 [1] GEAR (50 Teeth)  
6. 4B-3365 [1] DOWEL  
7. 2S-4071 [1] SEAL  
8. 9S-1162 [2] BEARING (Thrust)  
9. 1P-1750 C [1] BEARING CAP GROUP  
  2H-1190 [4] DOWEL  
10. 5S-5812 [1] DOWEL  
11. 9S-0684 [7] BEARING (Main)  
  C   INDICATES CHANGE
 

#UEG0018S0079
 

9S-2035: CRANKSHAFT GROUP

9S2035 CRANKSHAFT GROUP--Field Installation--Type 3
Serial No. 38J1 to 38J137 inclusive
c150544 UEG0018S
9S2035 CRANKSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D348 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-4438 C [1] CRANKSHAFT ASSEM.  
    (Includes)
2. 4M-9480 [6] RING  
3. 4F-5695 [6] PLUG  
4. 5B-5821 [1] DOWEL  
5. 2P-4563 [1] GEAR (50 teeth)  
6. 4B-3365 [1] DOWEL  
7. 2S-4071 [1] SEAL  
9. 1P-1750 [1] BEARING CAP GROUP  
    (Includes)
  2H-1190 [4] DOWEL  
10. 5S-5812 [1] DOWEL  
11. 6N-1168 C [7] BEARING (main)  
  C   INDICATES CHANGE
 

Information:

Engine News
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material
1979/09/19
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available
1981/01/28
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Connecting Rod And Main Bearings Used
1983/11/30
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket
1987/07/01
New Engine Cylinder Liner Available {1216}
1996/01/17
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy
1977/01/28
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy
1977/10/12
Reference Chart For Main And Connecting Rod Bearings
1977/11/30
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate
1978/10/18
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Specifications
Cylinder Block
D348 INDUSTRIAL & MARINE ENGINES
Cylinder Liner
D348 INDUSTRIAL & MARINE ENGINES
Cylinder Liner Projection
D348 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Main Bearings
D348 INDUSTRIAL & MARINE ENGINES
Main Bearings
D348 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Disassembly and Assembly
Spacer Plates
D348 INDUSTRIAL & MARINE ENGINES
Cylinder Liners
D348 INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
D348 INDUSTRIAL & MARINE ENGINES
Piston Cooling Tubes
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
New Cylinder Head And Spacer Plate Gaskets Prevent Oil Leakage Around Gear Pocket{1101}
1987/07/06
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D348 :

CYLINDER BLOCK AND COVERS GROUP
7L-5328 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS GROUP
7L-5328 CYLINDER BLOCK AND COVERS GROUP
CYLINDER BLOCK AND COVERS
7L-5328 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7L-5328 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7L-5328 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
7L-4418 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
7L-4418 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
8L-9409 CYLINDER BLOCK AS
CYLINDER BLOCK AS
8L-9409 CYLINDER BLOCK AS
CRANKSHAFT GROUP
9S-2035 CRANKSHAFT GROUP
CRANKSHAFT GROUP
9S-2035 CRANKSHAFT GROUP

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.