AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D348 ENGINE 36J00001-00560 ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE D348 INDUSTRIAL ENGINE 36J
 D348 ENGINE 36J00001-00560 UEG0023S D348 36J   (1968)

Parts group D348:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
REGULATOR ASSEMBLY
6L-5657 REGULATOR ASSEMBLY
6L5657 REGULATOR ASSEMBLY
Part of 7L5916 and 8L5211 Alternators shown on Pages 61, 62, 62C and 62D
ALTERNATOR GROUP
7L-5916 ALTERNATOR GROUP
7L5916 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 1
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 60 and 62A
ALTERNATOR GROUP
7L-5916 ALTERNATOR GROUP
7L5916 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 2
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 60 and 62A
ALTERNATOR ASSEMBLY
5L-6468 ALTERNATOR ASSEMBLY
5L6468 ALTERNATOR ASSEMBLY--24 Volt, 60 Ampere
Part of 7L5916 and 8L5211 Alternator Groups shown on Pages 61, 62, 62C and 62D
ALTERNATOR GROUP
8L-5211 ALTERNATOR GROUP
8L5211 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 1
FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 60 and 62A
ALTERNATOR GROUP
8L-5211 ALTERNATOR GROUP
8L5211 ALTERNATOR GROUP--24 Volt, 60 Ampere--Type 2
FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF
6L5657 Regulator and 5L6468 Alternator parts are shown on Pages 60 and 62A
ALTERNATOR GROUP
7L-8068 ALTERNATOR GROUP
7L8068 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 1
5L1243 Alternator, 6L5397 and 6L5658 Regulator parts are shown on Pages 62J and 63
For 30 Volt application substitute 6L5658 for 6L5397 Regulator Assembly
ALTERNATOR GROUP
7L-8068 ALTERNATOR GROUP
7L8068 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 2
5L1243 Alternator, 6L5397 and 6L5658 Regulator parts are shown on Pages 62J and 63
For 30 Volt application substitute 6L5658 for 6L5397 Regulator Assembly
CHARING ALTERNATOR GROUP
1N-9415 CHARING ALTERNATOR GROUP
1N9415 CHARING ALTERNATOR GROUP--32 Volt, 60 Ampere
FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF. 5L1243 Alternator, 6L5397 and 6L5658
Regulator parts are shown on Pages 62J and 63. For 30 Volt application substitute 6L5658 for
6L5397 Regulator Assembly
ALTERNATOR GROUP
1N-9415 ALTERNATOR GROUP
1N9415 ALTERNATOR GROUP--32 Volt, 60 Ampere--Type 2
FOR USE WITH FAN DRIVE OR FRONT POWER TAKE-OFF. 5L1243 Alternator, 6L5397 and 6L5658
Regulator parts are shown on Pages 62J and 63. For 30 Volt application substitute 6L5658
for 6L5397 Regulator Assembly
ALTERNATOR AS
5L-1243 ALTERNATOR AS
5L1243 ALTERNATOR ASSEMBLY--32 Volt, 60 Ampere
Part of 7L8068 and 1N9415 Alternator Groups shown on Pages 62E, 62F and 62G
6L-5397 REGULATOR ASSEMBLY
6L5397 REGULATOR ASSEMBLY--32 Volt, 60 Ampere
Part of 7L8068 and 1N9415 Alternator Groups shown on Pages 62E, 62F and 62G
6L5658 REGULATOR ASSEMBLY--30 Volt, 60 Ampere
FOR USE WITH 7L8068 AND 1N9415 ALTERNATOR GROUPS SHOWN ON PAGES
62E, 62F AND 62G
REGULATOR ASSEMBLY
6L-5658 REGULATOR ASSEMBLY
6L5397 REGULATOR ASSEMBLY--32 Volt, 60 Ampere
Part of 7L8068 and 1N9415 Alternator Groups shown on Pages 62E, 62F and 62G
6L5658 REGULATOR ASSEMBLY--30 Volt, 60 Ampere
FOR USE WITH 7L8068 AND 1N9415 ALTERNATOR GROUPS SHOWN ON PAGES
62E, 62F AND 62G
BATTERY GP
BATTERY GROUP
1L-5663 BATTERY GROUP
1L5663 BATTERY GROUP--32 Volt, 170 Ampere Hours
FOR USE BETWEEN 30 degrees AND 70 degrees FAHRENHEIT TEMPERATURES
Only separate parts serviced. When complete Group
is required order 2N1943 shown on Page 64B
BATTERY GP
1H-1342 BATTERY GP
1H1342 BATTERY GROUP--32 Volt, 200 Ampere Hours--Type 1
FOR USE BETWEEN 0 degrees AND 30 degrees FAHRENHEIT TEMPERATURES
BATTERY GP
2N-1943 BATTERY GP
2N1943 BATTERY GROUP--30 Volt, 172 Ampere Hours
FOR USE BETWEEN 10 degrees AND 30 degrees FAHRENHEIT TEMPERATURES
BATTERY GP
1H-1342 BATTERY GP
1H1342 BATTERY GROUP--32 Volt, 200 Ampere Hours--Type 2
FOR USE BETWEEN 0 degree AND 30 degrees FAHRENHEIT TEMPERATURES
BATTERY GP
3N-4653 BATTERY GP
3N4653 BATTERY GROUP--24 Volt, 300 Ampere Hours
BATTERY GROUP
2N-1947 BATTERY GROUP
2N1947 BATTERY GROUP--24 Volt, 315 Ampere Hours--Type 1
Only separate parts serviced. When complete Group
is required order 3N4653 shown on Page 64C
BATTERY GROUP
2N-1947 BATTERY GROUP
2N1947 BATTERY GROUP--24 Volt, 315 Ampere Hours--Type 2
Only separate parts serviced. When complete Group
is required order 3N4653 shown on Page 64C
BATTERY GP
7L-7871 BATTERY GP
7L7871 BATTERY--24 Volt, 172 Ampere Hours
BATTERY GP
7L-7872 BATTERY GP
7L7872 BATTERY--24 Volt, 220 Ampere Hours
BOX GP
JUNCTION BOX GROUP
8L-4244 JUNCTION BOX GROUP
8L4244 JUNCTION BOX GROUP
Part of 2N9387 Automatic Start-Stop Arrangement listed on Page 74A-2
JUNCTION BOX GP
3N-0857 JUNCTION BOX GP
3N857 JUNCTION BOX GROUP
Serial No. 36J245-Up. Part of 3N876 Arrangement and
2N9405 Governor Group shown on Pages 74B-1 and 74K-7
CONTACTOR GP
SAFETY CONTACTOR GROUP
1N-9911 SAFETY CONTACTOR GROUP
1N9911 SAFETY CONTACTOR GROUP
Part of 1N9913 Arrangement listed on Page 74A
6L2211 Tachometer Drive parts are shown on Page 74H
ALARM CONTACTOR GROUP
2N-9386 ALARM CONTACTOR GROUP
2N9386 ALARM CONTACTOR GROUP--Type 1
Part of 2N9387 and 3N876 Arrangements listed on Pages 74B and 74B-1
6L2211 Tachometer Drive parts are shown on Page 74H
ALARM CONTACTOR GROUP
2N-9386 ALARM CONTACTOR GROUP
2N9386 ALARM CONTACTOR GROUP--Type 2
Part of 2N9387 and 3N876 Arrangements listed on Pages 74B and 74B-1
ALARM CONTACTOR GROUP
2N-9386 ALARM CONTACTOR GROUP
2N9386 ALARM CONTACTOR GROUP--Type 3
Part of 2N9387 and 3N876 Arrangements listed on Pages 74B and 74B-1
ALARM CONTACTOR GROUP
2N-9508 ALARM CONTACTOR GROUP
2N9508 ALARM CONTACTOR GROUP - Type 1
Part of 2N9509 and 3N875 Arrangements listed on Pages 74A and 74B-1
ALARM CONTACTOR GROUP
2N-9508 ALARM CONTACTOR GROUP
2N9508 ALARM CONTACTOR GROUP--Type 2
Part of 2N9509 and 3N875 Arrangements listed on Pages 74A and 74B-1
SAFETY CONTACTOR GROUP
7L-6758 SAFETY CONTACTOR GROUP
7L6758 SAFETY CONTACTOR GROUP
Serial No. 36J1 to 36J222 inclusive
FOR USE WITH INSTRUMENT PANEL
SAFETY CONTACTOR GROUP
7L-6758 SAFETY CONTACTOR GROUP
7L6758 SAFETY CONTACTOR GROUP
Serial No. 36J223 to 36J321 inclusive. FOR USE WITH INSTRUMENT PANEL
SAFETY ALARM CONTACTOR GROUP
2N-4037 SAFETY ALARM CONTACTOR GROUP
2N4037 SAFETY ALARM CONTACTOR GROUP--Type 3
Serial No. 36J322-Up
FOR USE WITH INSTRUMENT PANEL
SAFETY ALARM CONTACTOR GROUP
2N-4037 SAFETY ALARM CONTACTOR GROUP
2N4037 SAFETY ALARM CONTACTOR GROUP--Type 4
Serial No. 36J322-Up
FOR USE WITH INSTRUMENT PANEL
SAFETY ALARM CONTACTOR GROUP
2N-4037 SAFETY ALARM CONTACTOR GROUP
2N4037 SAFETY ALARM CONTACTOR GROUP--Type 1
Serial No. 36J322-Up
FOR USE WITH INSTRUMENT PANEL
SAFETY ALARM CONTACTOR GROUP
2N-4037 SAFETY ALARM CONTACTOR GROUP
2N4037 SAFETY ALARM CONTACTOR GROUP--Type 2
Serial No. 36J322-Up
FOR USE WITH INSTRUMENT PANEL
CONTACTOR GP-OVERSPEED
7L-7367 CONTACTOR GP-OVERSPEED
7L7367 OVERSPEED SAFETY CONTACTOR GROUP--Replaced by 3N6385 shown
on Page 82E
CONTACTOR GP-OVERSPEED
3N-6385 CONTACTOR GP-OVERSPEED
3N6385 OVERSPEED CONTACTOR GROUP--Replaces 7L7367 shown on Page 82D
GLOW PLUG GP
STARTING AID GLOW PLUG GROUP
8L-5170 STARTING AID GLOW PLUG GROUP
8L5170 STARTING AID GLOW PLUG GROUP--24 Volt--Type 1
STARTING AID GLOW PLUG GROUP
8L-5170 STARTING AID GLOW PLUG GROUP
8L5170 STARTING AID GLOW PLUG GROUP--24 Volt--Type 2
STARTING AID GLOW PLUG GROUP
8L-5170 STARTING AID GLOW PLUG GROUP
8L5170 STARTING AID GLOW PLUG GROUP--24 Volt--Type 3
6L4407 Wiring Kit parts are shown on Page 62K
STARTING AID GLOW PLUG GROUP
1N-9386 STARTING AID GLOW PLUG GROUP
1N9386 STARTING AID GLOW PLUG GROUP--32 Volt--Type 1
STARTING AID GLOW PLUG GROUP
1N-9386 STARTING AID GLOW PLUG GROUP
1N9386 STARTING AID GLOW PLUG GROUP--32 Volt--Type 2
SHUTOFF GP
SAFETY SHUT-OFF AND MOUNTING
SAFETY SHUT-OFF AND MOUNTING
SAFETY SHUT-OFF AND MOUNTING
Serial No. 36J1 to 36J143 inclusive
Safety Control Shut-Off parts are shown on Pages 29, 30 and 31
SAFETY SHUT-OFF AND MOUNTING
SAFETY SHUT-OFF AND MOUNTING
SAFETY SHUT-OFF AND MOUNTING
Serial No. 36J144 to 36J161 inclusive
Safety Control Shut-Off parts are shown on Pages 29, 30, and 31
SAFETY SHUT-OFF AND MOUNTING GROUP
8L-9330 SAFETY SHUT-OFF AND MOUNTING GROUP
8L9330 SAFETY SHUT-OFF AND MOUNTING GROUP
Serial No. 36J162 to 36J222 inclusive
7L109 Safety Control Shut-Off parts are shown on Pages 29 and 30
SAFETY SHUT-OFF AND MOUNTING GROUP
8L-9330 SAFETY SHUT-OFF AND MOUNTING GROUP
8L9330 SAFETY SHUT-OFF AND MOUNTING GROUP
Serial No. 36J223-Up
7L109 Safety Control Shut-Off parts are shown on Pages 29 and 30
SAFETY CONTROL SHUT-OFF GROUP
7L-0109 SAFETY CONTROL SHUT-OFF GROUP
7L109 SAFETY CONTROL SHUT-OFF GROUP--Part 1 of 3
Part of Safety Shut-Off and Mounting shown on Pages 28 through 28C
SAFETY CONTROL SHUT-OFF GROUP
7L-0109 SAFETY CONTROL SHUT-OFF GROUP
7L109 SAFETY CONTROL SHUT-OFF GROUP--Part 2 of 3
Part of Safety Shut-Off and Mounting shown on Pages 28 through 28C
SAFETY CONTROL SHUT-OFF GROUP
7L-0109 SAFETY CONTROL SHUT-OFF GROUP
7L109 SAFETY CONTROL SHUT-OFF GROUP--Part 3 of 3
Part of Safety Shut-Off and Mounting shown on Pages 28 through 28C
SOLENOID SHUT-OFF GROUP
5L-8984 SOLENOID SHUT-OFF GROUP
5L8984 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 36J1 to 36J244 inclusive
Also part of 2N9387 Arrangement listed on Page 74A-2
SHUT-OFF GP-SOLENOID
3N-0584 SHUT-OFF GP-SOLENOID
3N584 SOLENOID SHUT-OFF GROUP--24 Volt
Serial No. 36J245-Up
Also part of 2N9387 and 3N876 Arrangements listed on Pages 74A-2 and 74B-1
WATER TEMPERATURE SHUT-OFF GROUP
8L-6188 WATER TEMPERATURE SHUT-OFF GROUP
8L6188 WATER TEMPERATURE SHUT-OFF GROUP
Serial No. 36J1 to 36J362 inclusive
WATER TEMPERATURE SHUT-OFF GROUP
3N-0712 WATER TEMPERATURE SHUT-OFF GROUP
3N712 WATER TEMPERATURE SHUT-OFF GROUP
Serial No. 36J363-Up
SHUT-OFF GP
2N-6262 SHUT-OFF GP
2N6262 MANUAL SHUT-OFF GROUP
Serial No. 36J363-Up. Also part of 2N9405, 2N503 and 4N5190 Woodward Governor
Groups shown on Pages 74K-6, 86C, 86D and 86H
SOLENOID GP
SWITCH AS-SOLENOID
6N-5123 SWITCH AS-SOLENOID
6N5123 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 8H1913 Motor Assembly shown on Page 55D-1
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
4M1812 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 7L8797 & 8H1913 Motor Assemblies shown on Pages 54, 55A & 55C
SWITCH AS-SOLENOID
5L-8595 SWITCH AS-SOLENOID
5L8595 SOLENOID SWITCH ASSEMBLY
Part of 1N9412 and 8L5939 Motor Assemblies shown on Pages 55E, 55G & 74K
SWITCH AS-SOLENOID
5L-8595 SWITCH AS-SOLENOID
5L8595 SOLENOID SWITCH ASSEMBLY--Type 2
Part of 1N9412 and 8L5939 Motor Assemblies shown on Pages 55E, 55G and 74K
STARTING GP-AUTOMATIC
1N-9913 AUTOMATIC START-STOP ARRANGEMENT
1N9913 AUTOMATIC START-STOP ARRANGEMENT-24 Volt
Serial No. 36J1 to 36J321 inclusive
2N-9509 AUTOMATIC START-STOP ARRANGEMENT
2N9509 AUTOMATIC START-STOP ARRANGEMENT--24 Volt
Serial No. 36J322-Up
2N-9387 AUTOMATIC START-STOP ARRANGEMENT
2N9387 AUTOMATIC START-STOP ARRANGEMENT--24 Volt
Only separate parts serviced
FOR USE WITH HYDRO-MECHANICAL GOVERNOR
AUTOMATIC START-STOP CHART
AUTOMATIC START-STOP CHART
AUTOMATIC START-STOP CHART
3N-0875 AUTOMATIC START-STOP ARRANGEMENT
3N875 AUTOMATIC START-STOP ARRANGEMENT--32 Volt--Factory Installation
Serial No. 36J363-Up
3N-0876 START-STOP AR
3N876 AUTOMATIC START-STOP ARRANGEMENT--32 Volt--Factory Installation
Serial No. 36J245-Up. Only separate parts serviced
FOR USE WITH HYDRO-MECHANICAL GOVERNOR
STARTING AID GP
STARTING AID GLOW PLUG GROUP
8L-5170 STARTING AID GLOW PLUG GROUP
8L5170 STARTING AID GLOW PLUG GROUP--24 Volt--Type 1
STARTING AID GLOW PLUG GROUP
8L-5170 STARTING AID GLOW PLUG GROUP
8L5170 STARTING AID GLOW PLUG GROUP--24 Volt--Type 2
STARTING AID GLOW PLUG GROUP
8L-5170 STARTING AID GLOW PLUG GROUP
8L5170 STARTING AID GLOW PLUG GROUP--24 Volt--Type 3
6L4407 Wiring Kit parts are shown on Page 62K
STARTING AID GLOW PLUG GROUP
1N-9386 STARTING AID GLOW PLUG GROUP
1N9386 STARTING AID GLOW PLUG GROUP--32 Volt--Type 1
STARTING AID GLOW PLUG GROUP
1N-9386 STARTING AID GLOW PLUG GROUP
1N9386 STARTING AID GLOW PLUG GROUP--32 Volt--Type 2
STARTING MOTOR GP
DIRECT ELECTRIC STARTING GROUP
7L-5888 DIRECT ELECTRIC STARTING GROUP
7L5888 DIRECT ELECTRIC STARTING GROUP--24 Volt--Type 1
7L8797 Motor parts are shown on Pages 54 through 55B
DIRECT ELECTRIC STARTING GROUP
7L-5888 DIRECT ELECTRIC STARTING GROUP
7L5888 DIRECT ELECTRIC STARTING GROUP--24 Volt--Type 2
3L6655 Wiring Kit and 7L8797 Motor parts are shown on Pages 52B and 54 through 55B
DIRECT ELECTRIC STARTING GROUP
7L-5888 DIRECT ELECTRIC STARTING GROUP
7L5888 DIRECT ELECTRIC STARTING GROUP--24 Volt--Type 3
3L6655 and 7L8797 Motor parts are shown on Pages 52B and 54 through 55B
STARTING MOTOR GP-ELECTRIC
1N-9414 STARTING MOTOR GP-ELECTRIC
1N9414 ELECTRIC STARTING GROUP--32 Volt--Type 1
1N9412 Motor parts are shown on Pages 55E & 55F
STARTING MOTOR GP-ELECTRIC
1N-9414 STARTING MOTOR GP-ELECTRIC
1N9414 ELECTRIC STARTING GROUP--32 Volt--Type 2
1N9412 Motor parts are shown on Pages 55E & 55F
STARTING MOTOR ASSEMBLY
7L-8797 STARTING MOTOR ASSEMBLY
7L8797 STARTING MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 1
Part of 7L5888 Electric Starting shown on Page 53
4M1812 Switch parts are shown on Page 53
STARTING MOTOR ASSEMBLY
7L-8797 STARTING MOTOR ASSEMBLY
7L8797 STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 1
Part of 7L5888 Electric Starting Group shown on Page 53
STARTING MOTOR ASSEMBLY
7L-8797 STARTING MOTOR ASSEMBLY
7L8797 STARTING MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 2--
Replaced by 8H1913 shown on Page 55C
Part of 7L5888 Electric Starting Group shown on Pages 53A and 53B
4M1812 Switch parts are shown on Page 53
STARTING MOTOR ASSEMBLY
7L-8797 STARTING MOTOR ASSEMBLY
7L8797 STARTING MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 2
Part of 7L5888 Electric Starting Group shown on Pages 53A & 53B. Only separate parts serviced
When complete Group is required order 8H1913 Motor Assembly shown on Pages 55C & 55D
MOTOR ASSEMBLY
8H-1913 MOTOR ASSEMBLY
8H1913 MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 1--Replaces 7L8797 shown on Page 55A
4M1812 Switch parts are shown on Page 53
MOTOR ASSEMBLY
8H-1913 MOTOR ASSEMBLY
8H1913 MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 1
MOTOR ASSEMBLY
8H-1913 MOTOR ASSEMBLY
8H1913 MOTOR ASSEMBLY--24 Volt--Part 1 of 2--Type 2
6N5123 Switch parts are shown on Page 52B
MOTOR ASSEMBLY
8H-1913 MOTOR ASSEMBLY
8H1913 MOTOR ASSEMBLY--24 Volt--Part 2 of 2--Type 2
MOTOR AS
1N-9412 MOTOR AS
1N9412 MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 1
Part of 1N9414 Electric Starting Group shown on Pages 53C & 53D
5L8595 Switch parts are shown on Page 53
MOTOR AS
1N-9412 MOTOR AS
1N9412 MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 1
Part of 1N9414 Electric Starting Group shown on Pages 53C & 53D
MOTOR AS
1N-9412 MOTOR AS
1N9412 MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 2
Part of 1N9414 Electric Starting Group shown on Pages 53C and 53D
5L8595 Switch parts are shown on Page 53
MOTOR AS
1N-9412 MOTOR AS
1N9412 MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 2
Part of 1N9414 Electric Starting Group shown on Pages 53C and 53D
AIR STARTING MOTOR GROUP
7L-6512 AIR STARTING MOTOR GROUP
7L6512 AIR STARTING MOTOR GROUP--Type 1--Replaced by 6N4861 shown on Page 56A-2
3L9922 Valve and 7L8174 Motor parts are shown on Pages 57 and 57A
AIR STARTING MOTOR GROUP
7L-6512 AIR STARTING MOTOR GROUP
7L6512 AIR STARTING MOTOR GROUP--Type 2--Replaced by 6N4861 shown on Page 56A-2
4N7556 Lubricator, 7L8174 Motor and 3L9922 Valve parts are shown on Pages 56B and 57
AIR STARTING MOTOR GROUP
6N-4859 AIR STARTING MOTOR GROUP
6N4859 AIR STARTING MOTOR GROUP
Part of 6N4861 Air Starting Motor Group shown on Page 56A-2
STARTING MOTOR GP-AIR
6N-4861 STARTING MOTOR GP-AIR
6N4861 AIR STARTING MOTOR GROUP
FOR USE WITH 6N4860 AIR SILENCER GROUP SHOWN ON PAGE 59B
6N4859 Motor and 4N7556 Lubricator parts are shown on Pages 56A-1 and 56B
LUBRICATOR GP-AIR MOTOR
4N-7556 LUBRICATOR GP-AIR MOTOR
4N7556 AIR MOTOR LUBRICATOR GROUP
Part of 7L6512 Air Starting Motor Group shown on Page 56A
CHANGEOVER GP
4N-4985 CHANGEOVER GP
4N4985 AIR START CHANGEOVER GROUP--S.A.E. Standard Engine Rotation--Field Installation
FOR USE WITH 7L8174 AIR MOTOR ASSEMBLY SHOWN ON PAGES 57 AND 57A
AIR MOTOR ASSEMBLY
7L-8174 AIR MOTOR ASSEMBLY
7L8174 AIR MOTOR ASSEMBLY--Type 1
Part of 7L6512 Air Starting Motor
3H3171 Motor parts are shown on Page 58
VALVE GP-WHISTLE
3L-9922 VALVE GP-WHISTLE
3L9922 WHISTLE VALVE
Part of 7L6512 Air Starting Motor
AIR MOTOR ASSEMBLY
7L-8174 AIR MOTOR ASSEMBLY
7L8174 AIR MOTOR ASSEMBLY--Type 2
Part of 7L6512 Air Starting Motor Group shown on Pages 56 and 56A
3H3171 Motor parts are shown on Pages 57B and 58
LUG
3H-3171 LUG
3H3171 AIR MOTOR--Type 2
Part of 7L8174 Air Motor Assembly shown on Pages 57 & 57A
LUG
3H-3171 LUG
3H3171 AIR MOTOR
PART OF 7L8174 AIR MOTOR SHOWN ON PAGE 57
AIR SILENCER GROUP
7L-6554 AIR SILENCER GROUP
7L6554 AIR SILENCER GROUP--Replaced by 6N4860 shown on Page 59B
AIR RECEIVER GP
1L-5010 AIR RECEIVER GP
1L5010 AIR RECEIVER GROUP--10.5 Cubic Foot Capacity
AIR SILENCER GROUP
6N-4860 AIR SILENCER GROUP
6N4860 AIR SILENCER GROUP--Replaces 7L6554 shown on Page 59
FOR USE WITH 6N4861 AIR STARTING MOTOR GROUP SHOWN ON PAGE 56A-2
VALVE GP-PRESSURE REDUCING
1L-2073 VALVE GP-PRESSURE REDUCING
1L2073 PRESSURE REDUCING REGULATING VALVE
ELECTRIC STARTING MOTOR GROUP
1N-9912 ELECTRIC STARTING MOTOR GROUP
1N9912 ELECTRIC STARTING MOTOR GROUP--24 Volt--Type 1
Part of 1N9913, 2N9509 & 2N9387 Arrangements listed on Pages 74A
& 74A-2. 3L6881 Starting Motor parts are shown on Page 74G-1
ELECTRIC STARTING MOTOR GROUP
1N-9912 ELECTRIC STARTING MOTOR GROUP
1N9912 ELECTRIC STARTING MOTOR GROUP--24 Volt--Type 2
Part of 1N9913, 2N9509 & 2N9387 Arrangements listed on Pages 74A
& 74A-2. 8L5938 Motor parts are shown on Page 74G-2
ELECTRIC STARTING MOTOR GROUP
3L-6881 ELECTRIC STARTING MOTOR GROUP
3L6881 ELECTRIC STARTING MOTOR GROUP--24 Volt--Replaced by 8L5938 shown on Page 74G-2
Part of 1N9912 Electric Starting Motor Group shown on Page 74F
ELECTRIC MOTOR GROUP
8L-5938 ELECTRIC MOTOR GROUP
8L5938 ELECTRIC MOTOR GROUP--24 Volt--Replaces 3L6881 shown on Page 74G-1
Part of 1N9912 Electric Starting Motor Group shown on Page 74G
MOTOR AS-ELECTRIC STARTING
8L-5939 MOTOR AS-ELECTRIC STARTING
8L5939 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 1
Serial No. 36J245-Up. Part of 3N744 Electric Starting Group shown on Page 74K-4. 5L8595 Switch parts are
shown on Page 53. Only separate parts serviced. When complete Assembly is required order 8L5937 shown on
Pages 74K-2 through 74K-3b
MOTOR AS-ELECTRIC STARTING
8L-5939 MOTOR AS-ELECTRIC STARTING
8L5939 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 1
Serial No. 36J245-Up. Part of 3N744 Electric Starting Group shown on Page 74K-4
Only separate parts serviced. When complete Assembly is required order 8L5937 shown on Pages
74K-2 through 74K-3b
MOTOR AS-ELECTRIC STARTING
8L-5939 MOTOR AS-ELECTRIC STARTING
8L5939 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 2
Serial No. 36J245-Up. Part of 3N744 Electric Starting Group shown on Page 74K-4. 5L8595 Switch parts are
shown on Page 53. Only separate parts serviced. When complete Assembly is required order 8L5937 shown on
Pages 74K-2 through 74K-3b
MOTOR AS-ELECTRIC STARTING
8L-5939 MOTOR AS-ELECTRIC STARTING
8L5939 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 2
Serial No. 36J245-Up. Part of 3N744 Electric Starting Group shown on Page 74K-4. Only separate parts
serviced. When complete Assembly is required order 8L5937 shown on Pages 74K-2 through 74K-3b
STARTING MOTOR AS-ELECTRIC
8L-5937 STARTING MOTOR AS-ELECTRIC
8L5937 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 1
Serial No. 36J245-Up
STARTING MOTOR AS-ELECTRIC
8L-5937 STARTING MOTOR AS-ELECTRIC
8L5937 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 1
Serial No. 36J245-Up
STARTING MOTOR AS-ELECTRIC
8L-5937 STARTING MOTOR AS-ELECTRIC
8L5937 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 1 of 2--Type 2
Serial No. 36J245-Up
STARTING MOTOR AS-ELECTRIC
8L-5937 STARTING MOTOR AS-ELECTRIC
8L5937 ELECTRIC STARTING MOTOR ASSEMBLY--32 Volt--Part 2 of 2--Type 2
Serial No. 36J245-Up
STARTING MOTOR GP-ELECTRIC
3N-0744 STARTING MOTOR GP-ELECTRIC
3N744 ELECTRIC STARTING MOTOR GROUP--32 Volt
Serial No. 36J245-Up. Part of 3N876 and 3N875 Arrangements listed on Page 74B-1. 8L5939 Motor
parts are shown on Pages 74K through 74K-1b. ALSO FOR USE WITH ELECTRIC WOODWARD
GOVERNOR. REFER TO CHART FOR USAGE SHOWN ON PAGE 74A-2
HYDRAULIC STARTING SYSTEM
HYDRAULIC STARTING SYSTEM
FOR USE WITHOUT GENERATOR OR ALTERNATOR
HARDWARE GROUP
2N-4333 HARDWARE GROUP
2N4333 HARDWARE GROUP--Type 1
Part of Hydraulic Starting System listed on Page 74L
HARDWARE GROUP
2N-4333 HARDWARE GROUP
2N4333 HARDWARE GROUP--Type 2
Part of Hydraulic Starting System listed on Page 74L
HARDWARE GROUP
2N-4333 HARDWARE GROUP
2N4333 HARDWARE GROUP--Type 3
Part of Hydraulic Starting System listed on Page 74L
HARDWARE GROUP
2N-4333 HARDWARE GROUP
2N4333 HARDWARE GROUP--Type 4
Part of Hydraulic Starting System listed on Page 74L
SWITCH GP
SWITCH AS-SOLENOID
6N-5123 SWITCH AS-SOLENOID
6N5123 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 8H1913 Motor Assembly shown on Page 55D-1
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
4M1812 SOLENOID SWITCH ASSEMBLY--24 Volt
Part of 7L8797 & 8H1913 Motor Assemblies shown on Pages 54, 55A & 55C
SWITCH AS-SOLENOID
5L-8595 SWITCH AS-SOLENOID
5L8595 SOLENOID SWITCH ASSEMBLY
Part of 1N9412 and 8L5939 Motor Assemblies shown on Pages 55E, 55G & 74K
SWITCH AS-SOLENOID
5L-8595 SWITCH AS-SOLENOID
5L8595 SOLENOID SWITCH ASSEMBLY--Type 2
Part of 1N9412 and 8L5939 Motor Assemblies shown on Pages 55E, 55G and 74K
TERMINAL & PLATE AS
7N-1269 TERMINAL & PLATE AS
7N1269 TERMINAL ASSEMBLY
Part of 5L8595 Solenoid Switch Assembly shown on Page 53-2
MAGNETIC SWITCH ASSEMBLY
7M-4291 MAGNETIC SWITCH ASSEMBLY
7M4291 MAGNETIC SWITCH ASSEMBLY--24 Volt
Part of 1N9912 Electric Starting Motor Group
TANK GP-AIR
AIR RECEIVER GP
1L-5010 AIR RECEIVER GP
1L5010 AIR RECEIVER GROUP--10.5 Cubic Foot Capacity
VALVE GP
VALVE GP-PRESSURE REDUCING
1L-2073 VALVE GP-PRESSURE REDUCING
1L2073 PRESSURE REDUCING REGULATING VALVE
WIRING GP
3L-6655 WIRING GP
3L6655 ELECTRIC STARTING SYSTEM WIRING GROUP
Part of 7L5888 Electric Starting Group shown on Pages 53B and 53B-2
6L-4407 WIRING GP-PLUG
6L4407 WIRING KIT GROUP
Part of 8L5170 Starting Aid Glow Plug Group shown on Page 64-2
8L-4849 WIRING GP
8L4849 WIRING GROUP
Also part of 1N9913, 2N9509, 2N9387, 3N875 and 3N876 Automatic Start-Stop
Arrangements listed on Pages 74A, 74A-2 and 74B-1. FOR USE WITH ELECTRIC
WOODWARD GOVERNOR. REFER TO CHART FOR USAGE SHOWN ON PAGE 74A-2

Information:

(For parts list, see above)

Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Engine News
New Regulator And Field Coil Assemblies Used
1981/11/25
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Identification Of External Terminals On Alternators
1987/04/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut
1988/01/01
Repair Parts Available for Alternator R-Terminal {1405}
2000/12/01
Harness Repair of Alternator R-Terminal Connector {1405}
2000/12/01
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternators
D348 INDUSTRIAL & MARINE ENGINES
Alternator Regulator
D348 INDUSTRIAL & MARINE ENGINES
Alternator
26SI Series Alternator
Alternator
30SI Series and 34SI Series Alternator
Systems Operation
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Normal Operation
30SI Series and 34SI Series Alternator
Component Description
30SI Series and 34SI Series Alternator
Testing and Adjusting
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
T1 Alternator Output - Test
30SI Series and 34SI Series Alternator
T2 Electrical System Current - Test
30SI Series and 34SI Series Alternator
T3 Charging System - Test
30SI Series and 34SI Series Alternator
T4 Alternator Drive System - Check
30SI Series and 34SI Series Alternator
T5 Alternator Current - Test
30SI Series and 34SI Series Alternator
T6 Residual Magnetism Restoration
30SI Series and 34SI Series Alternator
T7 Identifying Source of Current Draw - Test
30SI Series and 34SI Series Alternator
T8 Alternator Overcharging - Test
30SI Series and 34SI Series Alternator
General Information
30SI Series and 34SI Series Alternator
Initial Troubleshooting Procedure
30SI Series and 34SI Series Alternator
Component - Test
30SI Series and 34SI Series Alternator
Disassembly and Assembly
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Disassemble
30SI Series and 34SI Series Alternator
Alternator - Assemble
30SI Series and 34SI Series Alternator
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Repair Parts Available for Alternator R-Terminal {1405}
2000/10/02
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Engine News
New Mounting Bracket For Mechanical Shut-Off Cable
1982/05/12
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Battery Test Procedure {1401}
Battery Test Procedure {1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Engine News
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Special Instruction
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Replacement Of 5N1848, 5N1849 And 5N1850 A1 Module Regulator Assemblies{4467}
Replacement Of 5N1848, 5N1849 And 5N1850 A1 Module Regulator Assemblies{4467}
Service Magazine
New Generators{4454,4457,4467}
1982/11/01
Engine News
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Specifications
Water Temperature Contactor
D348 INDUSTRIAL & MARINE ENGINES
Water Temperature Contactor Switches
D348 INDUSTRIAL & MARINE ENGINES
Overspeed Contactor Switch
D348 INDUSTRIAL & MARINE ENGINES
Oil Pressure Contactor Switches
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Air Starter Relay Valve Improved{1462}
1991/06/24
Special Instruction
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Installation Of Electric (Digital) Tachometer Groups{7462}
Installation Of Electric (Digital) Tachometer Groups{7462}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Digital Tachometer Available{7462}
1983/08/15
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New Digital Tachometers Available As Attachments{7462}
1990/06/18
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Specifications
Glow Plug Wiring
D348 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Glow Plugs, Precombustion Chambers
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Service Magazine
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Engine News
New Engine Timing Indicator Group Available
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Engine News
New Governor Drive Gears And Weight Assemblies
1983/09/14
Service Magazine
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Engine News
New Oil Pump Has Improved Relief Valve For Better Pressure Control
1979/05/09
Improved Cable Assembly For Mechanical Shut-Off Group
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Heavy-Duty Line Of Batteries Available To U.S. Dealers
1986/09/01
&quot;Ugly's Electrical-References&quot; SEBD0983, Now Available
1990/06/01
Air Starter Relay Valve Improved
1991/07/01
Safety Vent Caps For Caterpillar Batteries
1977/07/13
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/17
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Mounting Bracket For Mechanical Shut-Off Cable{7418}
1982/05/10
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Generators{4454,4457,4467}
1982/11/01
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Air Starter Relay Valve Improved{1462}
1991/06/24
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Specifications
Sending Units For Water Temperature
D348 INDUSTRIAL & MARINE ENGINES
Sending Unit For Engine Oil Pressure<BR> (12 V - 24 V - 32 V)
D348 INDUSTRIAL & MARINE ENGINES
Sending Unit For Water Temperature
D348 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Engine News
New Oil Pressure Sender Assembly Used
1988/11/01
Improved Pressure Gauge Sender Used
1988/12/01
New Coolant Level Sensor Available {7422}
2001/02/01
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Specifications
Sending Units For Water Temperature
D348 INDUSTRIAL & MARINE ENGINES
Sending Unit For Engine Oil Pressure<BR> (12 V - 24 V - 32 V)
D348 INDUSTRIAL & MARINE ENGINES
Sending Unit For Water Temperature
D348 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure
D348 INDUSTRIAL & MARINE ENGINES
Magnetic Pick-Up<BR> (2301 Control)
D348 INDUSTRIAL & MARINE ENGINES
Magnetic Pickup
D348 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
Engine News
Improved Cable Assembly For Mechanical Shut-Off Group
1980/11/12
New Mounting Bracket For Mechanical Shut-Off Cable
1982/05/12
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Shut-Off Solenoids
D348 INDUSTRIAL & MARINE ENGINES
Shut Off Solenoids
D348 INDUSTRIAL & MARINE ENGINES
Mechanical Overspeed Shutoff
D348 INDUSTRIAL & MARINE ENGINES
Shut Off Valve<BR> (Water Temperature) (4L7108)
D348 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Safety Shutoff Control
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/17
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
New Mounting Bracket For Mechanical Shut-Off Cable{7418}
1982/05/10
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Adjust Bosch Solenoid If Replaced Or Reinstalled
1988/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Starter Solenoids
D348 INDUSTRIAL & MARINE ENGINES
Shut-Off Solenoids
D348 INDUSTRIAL & MARINE ENGINES
Shut Off Solenoids
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Engine News
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Specifications
Glow Plug Wiring
D348 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Glow Plugs, Precombustion Chambers
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Air Starter Relay Valve Improved{1462}
1991/06/24
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
New Starting Motors Used {1453}
2002/05/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starter Motors
D348 INDUSTRIAL & MARINE ENGINES
Starter Solenoids
D348 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switches
D348 INDUSTRIAL & MARINE ENGINES
Air Starting Motors
D348 INDUSTRIAL & MARINE ENGINES
Pressure Regulating Valve For Air Starting Motor
D348 INDUSTRIAL & MARINE ENGINES
Hydraulic Starting Motor
D348 INDUSTRIAL & MARINE ENGINES
Charging Pump For Hydraulic Starter
D348 INDUSTRIAL & MARINE ENGINES
Hand Pump For Hydraulic Starter
D348 INDUSTRIAL & MARINE ENGINES
Pressure Accumulator For Hydraulic Starter
D348 INDUSTRIAL & MARINE ENGINES
Air Starting Motors
D348 INDUSTRIAL & MARINE ENGINES
Hydraulic Starting System
D348 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switch
D348 INDUSTRIAL & MARINE ENGINES
Starter Motors
D348 INDUSTRIAL & MARINE ENGINES
Starting Air Regulating Valve<BR> (1L5011)
D348 INDUSTRIAL & MARINE ENGINES
Air Valves For Air Starting System
D348 INDUSTRIAL & MARINE ENGINES
Prelubrication Pump Motor<BR> (Electric)
D348 INDUSTRIAL & MARINE ENGINES
Prelubrication Pump Motor Relay
D348 INDUSTRIAL & MARINE ENGINES
Prelubrication Pump
D348 INDUSTRIAL & MARINE ENGINES
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Air Starter Relay Valve Improved{1462}
1991/06/24
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Engine News
New Dual Speed Switch Is Now Available
1981/10/21
Improved Mounting Assembly For Speed Switch Contactor Group
1983/02/16
Three Element Speed Switch Replaces Dual Element Speed Switch
1986/05/01
Check For Dirt Before Replacing Pyrometer Switch
1987/01/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Starter Magnetic Switches
D348 INDUSTRIAL & MARINE ENGINES
Pressure Switches
D348 INDUSTRIAL & MARINE ENGINES
Starter Magnetic Switch
D348 INDUSTRIAL & MARINE ENGINES
Pressure Switches
D348 INDUSTRIAL & MARINE ENGINES
Water Temperature Contactor Switches
D348 INDUSTRIAL & MARINE ENGINES
Overspeed Contactor Switch
D348 INDUSTRIAL & MARINE ENGINES
Oil Pressure Contactor Switches
D348 INDUSTRIAL & MARINE ENGINES
Oil Pressure Switch
D348 INDUSTRIAL & MARINE ENGINES
Electronic Speed Switch<BR> (3N7874 and 3N9595)
D348 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21
Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Engine News
New Address For Repair Of Diagnostic Tools
1982/06/16
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
5P957 And 5P3514 Coolant And Battery Tester
1987/04/01
Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
2002/08/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Tool Operating Manual
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
Troubleshooting
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Engine News
New Oil Pump Has Improved Relief Valve For Better Pressure Control
1979/05/09
A New Screen is Used in the 1L-2073 Pressure Reducing Valve {1462}
2004/06/01
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Specifications
Air Valves For Air Starting System
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Oil Pump Has Improved Relief Valve For Better Pressure Control{1304}
1979/05/07
Engine News
Improved Cable Assembly For Mechanical Shut-Off Group
1980/11/12
FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Glow Plug Wiring
D348 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/17
New Mounting Bracket For Mechanical Shut-Off Cable{7418}
1982/05/10
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Harness Repair of Alternator R-Terminal Connector {1405, 1408, 7553}
2000/10/02
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
Specifications
Prelubrication Pump Motor Relay
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Air Starter Relay Valve Improved{1462}
1991/06/24
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Instructions for Installing AssetIQTM for Engine Systems on Caterpillar and non-Caterpillar Products {7490}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Improved Element Assemblies Used In Jacket Water Heaters
1981/11/25
Troubleshooting Of Jacket Water Heaters
1986/01/01
Horizontally Mounted Jacket Water Heater Now Used
1987/05/01
A New Thermostat for the Jacket Water Heater {1383}
2006/09/11
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improved Element Assemblies Used In Jacket Water Heaters{1383}
1981/11/16
Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18
Troubleshooting Of Jacket Water Heaters{1383}
1985/12/16
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Service Magazine
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2014/07/15
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/08/13
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
Special Instruction
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Magazine
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.