AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2S708 CONNECTING ROD AND PISTON GROUP--12 Required Serial No. 36J182-Up D348 INDUSTRIAL ENGINE


BASIC ENGINE
PISTON & ROD GP
CAMSHAFT GP

INDUSTRIAL ENGINE D348 INDUSTRIAL ENGINE 36J
 D348 ENGINE 36J00001-00560 UEG0023S D348 36J   (1968)

BASIC ENGINE

PISTON & ROD GP
CONNECTING ROD AND PISTON
2S-0708 CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON GROUP
2S-0708 CONNECTING ROD AND PISTON GROUP
6N-1675 BEARING AND ROD KIT
 

#UEG0023S0070
 

2S-0708: CONNECTING ROD AND PISTON GROUP

2S708 CONNECTING ROD AND PISTON GROUP--12 Required
Serial No. 36J182-Up
c211903 UEG0023S
2S0708 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3752 [1] PISTON ASSEM.  
2. 9S-2263 [1] RING (Top)  
3. 9S-2264 [1] RING (Intermediate)  
4. 1P-0708 [1] RING (Oil)  
5. 2S-1602 [1] PIN  
6. 3F-8513 [2] RETAINER  
7. 4N-4261 C [1] ROD ASSEM.  
8. 9S-9748 [2] BOLT  
9. 1S-2353 [1] BEARING  
10. 7N-2581 C [1] BEARING ASSEM. (Standard)  
  4N-6878 CH [1] BEARING  
    (Standard I.D.-.005" Oversize O.D.)
  7N-2582 C [1] BEARING (.025" Undersize I.D.)  
  4N-6879 CH [1] BEARING  
    (.025" Undersize I.D.-.005" Oversize O.D.)
  7N-2583 C [1] BEARING (.05" Undersize I.D.)  
  4N-6880 CH [1] BEARING  
    (.050" Undersize I.D.-.005" Oversize O.D.)
  1P-0734 [1] PISTON RING REPLACEMENT GRP.  
    (Consists of a complete set of Rings for one Piston)
  C   INDICATES CHANGE
  H   WARNING-TO BE USED ONLY WITH R
 

#UEG0023S0071
 

6N-1675: BEARING AND ROD KIT

6N1675 BEARING AND ROD KIT--Field Installation
Serial No. 36J185-Up
To convert a complete engine to right and left hand connecting rods
UEG0023S0071 UEG0023S
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-8986 [12] TUBE ASSEMBLY  
  4N-9000 [12] BEARING CONNECTING ROD  
  4N-9001 R [6] ROD ASSEMBLY ODD CYLINDER  
  4N-9002 R [6] ROD ASSEMBLY EVEN CYLINDER  
  6N-1168 [7] BEARING MAIN  
  6N-1320 [1] SPRING  
  9S-1162 [2] BEARING THRUST  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0023S0072
 

7L-4489: DRIVE GP-CAMSHAFT

CAMSHAFT DRIVE (7L4489 N/S)
Serial No. 36J1 to 36J161 inclusive
c133063 UEG0023S
7L4489 DRIVE GP-CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-9882 [1] LOCK  
2. 0S-0484 [8] BOLT  
3. 2S-1997 [1] GEAR (40 Teeth Fuel Pump Drive)  
4. 4S-9372 [1] RETAINER  
5. 2S-2812 [2] GEAR ASSEM. (56 Teeth)  
    (Camshaft Idler-Front and Rear)
6. 2S-2809 [2] BEARING  
    (1 in each 2S2812 Gear Assem.)
7. 8M-8157 [4] SEAL  
8. 8H-1607 [2] SEAL  
9. 3S-3981 [2] SHAFT  
10. 0L-2070 [10] BOLT  
11. 8M-9024 [4] WASHER  
12. 3H-3451 [2] LOCK  
13. 5S-1186 [1] GEAR ASSEM. (17 Teeth)  
    (Fuel Pump Idler-Rear)
  9M-2418 [1] BEARING  
    (Part of 5S1186 Gear Assem.)
14. 5S-0518 [4] WASHER  
15. 5S-1096 [2] GEAR ASSEM. (60 & 24 Teeth)  
    (Cluster Idler-Rear and Front)
  5S-1141 [2] BEARING  
    (1 in each 5S1096 Gear Assem.)
16. 5S-4988 [2] LOCK  
17. 5S-4992 [2] SHAFT  
18. 0L-1351 [2] BOLT  
  9M-1367 [1] LOCK  
19. 7S-3176 [1] GEAR ASSEM. (34 Teeth)  
    (Oil Pump Idler)
  7S-3173 [1] BEARING  
    (Part of 7S3176 Gear Assem.)
20. 0S-1594 [2] BOLT  
  8M-7587 [2] LOCK  
21. 7S-3174 [1] SHAFT  
  4F-9029 [1] SEAL  
  4H-8256 [1] WASHER  
22. 5S-0502 [1] GEAR ASSEM. (66 teeth-idler front)  
  9M-4218 [1] BEARING  
    (Part of 5S502 Gear Assem.)
23. 7L-5485 [1] GEAR (43 Teeth)  
    (Water Pump Idler)
24. 7L-8838 [1] GEAR ASSEM. (28 Teeth)  
    (Water Pump Drive)
  2H-5558 [1] DOWEL  
    (Part of 7L8838 Gear Assem.)
 

#UEG0023S0073
 

7L-4489: DRIVE GP-CAMSHAFT

7L4489 CAMSHAFT DRIVE GROUP
Serial No. 36J162-Up
c111871 UEG0023S
7L4489 DRIVE GP-CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-9882 [1] LOCK  
2. 0S-0484 [8] BOLT  
3. 2S-1997 [1] GEAR (40 Teeth-Fuel Pump Drive)  
4. 4S-9372 [1] RETAINER  
5. 2S-2812 [2] GEAR ASSEM. (56 Teeth)  
    (Camshaft Idler-Front and Rear)
6. 2S-2809 [2] BEARING  
    (1 in each 2S2812 Gear Assem.)
7. 8M-8157 [4] SEAL  
8. 8H-1607 [2] SEAL  
9. 3S-3981 [2] SHAFT  
10. 0L-2070 [10] BOLT  
11. 9L-9132 [4] WASHER  
12. 3H-3451 [2] LOCK  
13. 5S-1186 [1] GEAR ASSEM. (17 Teeth)  
    (Fuel Pump Idler-Rear)
  9M-2418 [1] BEARING  
    (Part of 5S1186 Gear Assem.)
14. 1P-7789 [4] WASHER  
15. 5S-1096 [2] GEAR ASSEM. (60 & 24 Teeth)  
    (Cluster Idler-Rear and Front)
  5S-1141 [2] BEARING  
    (1 in each 5S1096 Gear Assem.)
16. 5S-4988 [2] LOCK  
17. 5S-4992 [2] SHAFT  
18. 0L-1351 [2] BOLT  
  9M-1367 [1] LOCK  
19. 7S-3176 [1] GEAR ASSEM. (34 Teeth)  
    (Oil Pump Idler)
  7S-3173 [1] BEARING  
    (Part of 7S3176 Gear Assem.)
20. 0S-1594 [2] BOLT  
  8M-7587 [2] LOCK  
21. 7S-3174 [1] SHAFT  
  4H-8256 [1] WASHER  
22. 5S-0502 [1] GEAR ASSEM. (66 Teeth-Idler Front)  
  9M-4218 [1] BEARING  
    (Part of 5S502 Assem.)
23. 7L-5485 [1] GEAR (43 Teeth)  
    (Water Pump Idler)
24. 1N-7172 [1] GEAR ASSEM. (28 Teeth)  
    (Water Pump Drive)
  2H-5558 [1] DOWEL  
    (Part of 1N7172 Assem.)
 

#UEG0023S0074
 

7L-4734: CAMSHAFT

CAMSHAFT (7L4734 N/S)--Part 1 of 2
Serial No. 36J1 to 36J362 inclusive
c133433 UEG0023S
7L4734 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-5541 [1] COVER  
2. 3S-6643 [2] SHAFT ASSEM.  
3. 9F-2247 [4] PLUG  
    (2 in each 3S6643 Shaft Assem.)
4. 7L-7458 [1] COVER  
5. 2S-0813 [4] SCREW  
  8M-7587 [4] LOCK  
6. 3S-2935 [1] GASKET  
7. 3S-5496 [2] SEAL  
8. 3S-4136 [24] ARM ASSEM.  
  4S-6525 [24] DOWEL  
9. 4S-7810 [24] ROLLER ASSEM.  
10. 4S-7808 [24] PIN ASSEM.  
    (1 each in 3S4136 Arm Assem.)
11. 2S-0323 [48] SCREW ASSEM.  
    (2 in each 3S4136 Arm Assem.)
12. 2S-3992 [48] SPRING  
13. 2S-3991 [48] PLUNGER  
    (2 each in 3S4136 Assem.)
14. 3S-6641 [2] SHAFT ASSEM.  
15. 9F-2247 [4] PLUG  
    (2 in each 3S6641 Assem.)
16. 0L-1026 [2] PLUG  
17. 1A-2029 [8] BOLT  
18. 3B-4506 [18] LOCKWASHER  
19. 2S-2817 [2] COVER  
  2S-2818 [2] GASKET  
20. 0S-1594 [4] BOLT  
  7M-4843 [2] LOCK  
21. 2S-2408 [2] PLATE  
22. 3S-3984 [2] HOUSING ASSEM.  
23. 9S-0255 [24] PIN  
24. 0L-0659 [16] STUD  
25. 9F-2247 [4] PLUG  
26. 3S-1870 [14] INSERT  
    (One-half each in 3S3984 Housing Assem.)
27. 3S-2303 [1] CAMSHAFT (Exhaust)  
28. 0L-0659 [2] STUD  
29. 1B-4203 [10] NUT  
30. 3S-2893 [1] GEAR ASSEM. (40 Teeth)  
31. 7S-2245 [1] DOWEL  
    (Part of 3S2893 Gear Assem.)
32. 5S-0330 [1] GEAR ASSEM. (40 Teeth)  
33. 7S-2245 [1] DOWEL  
    (Part of 5S330 Gear Assem.)
34. 8H-9872 [1] POINTER  
35. 3S-2891 [1] GASKET  
36. 2A-4996 [16] BOLT  
  3S-2892 [4] LOCK  
37. 5S-0331 [1] CAMSHAFT (Inlet)  
38. 2L-3845 [2] DOWEL  
 

#UEG0023S0075
 

7L-4734: CAMSHAFT

CAMSHAFT (7L4734 N/S)--Part 2 of 2
Serial No. 36J1 to 36J362 inclusive
c105589 UEG0023S
7L4734 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-7344 [1] COVER  
2. 4S-8729 H SEAL 232"  
3. 7L-5542 [1] COVER  
4. 5B-9603 [26] BOLT  
5. 3B-4506 [72] LOCKWASHER  
6. 4B-4278 [54] WASHER  
7. 2S-2817 [1] COVER  
8. 1A-2029 [8] BOLT  
9. 3S-5496 [16] SEAL  
10. 0S-1571 [4] BOLT  
  4M-5397 [4] LOCK  
11. 3S-2935 [1] GASKET  
12. 1B-4203 [14] NUT  
13. 3S-2891 [1] GASKET  
14. 3S-2893 [1] GEAR ASSEM. (40 Teeth)  
  8H-9208 [1] DOWEL  
    (Part of 3S2893 Gear Assem.)
15. 3S-6327 [1] CAMSHAFT  
16. 2S-2818 [2] GASKET  
17. 1D-4706 [28] BOLT  
18. 8S-9191 [14] BOLT  
  9M-6527 [14] WASHER  
19. 3S-2303 [1] CAMSHAFT (Exhaust)  
20. 3S-2894 [1] GEAR ASSEM. (40 Teeth)  
21. 7S-2245 [1] DOWEL  
    (Part of 3S2894 Gear Assem.)
22. 8H-9872 [1] POINTER  
23. 9S-1370 [1] STUD (1.812" long)  
24. 0L-0659 [1] STUD (1.375" long)  
25. 7L-5562 [1] COVER ASSEM.  
26. 9M-3723 [1] RETAINER  
  4H-1723 [1] SEAL  
27. 2S-8733 [2] BOSS  
28. 2A-3348 [2] DOWEL  
    (Parts of 7L5562 Cover Assem.)
29. 9H-4525 [1] DOWEL  
  H   ORDER BY THE FOOT
 

#UEG0023S0076
 

2N-4671: CAMSHAFT

CAMSHAFT (2N4671 N/S)--Part 1 of 2
Serial No. 36J363 to 36J372 inclusive
c132067 UEG0023S
2N4671 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-5541 [1] COVER  
2. 3S-6643 [2] SHAFT ASSEM.  
3. 9F-2247 [4] PLUG  
    (2 in each 3S6643 Shaft Assem.)
4. 7L-7458 [1] COVER  
5. 2S-0813 [4] SCREW  
  8M-7587 [4] LOCK  
6. 3S-2935 [1] GASKET  
7. 3S-5496 [2] SEAL  
8. 3S-4136 [24] ARM ASSEM.  
  4S-6525 [24] DOWEL  
9. 4S-7810 [24] ROLLER ASSEM.  
10. 4S-7808 [24] PIN ASSEM.  
    (1 each in 3S4136 Arm Assem.)
11. 2S-0323 [48] SCREW ASSEM.  
12. 2S-3992 [48] SPRING  
  2S-3991 [48] PLUNGER  
    (2 each in 3S4136 Assem.)
13. 3S-6641 [2] SHAFT ASSEM.  
  9F-2247 [4] PLUG  
    (2 in each 3S6641 Assem.)
14. 0L-1026 [2] PLUG  
15. 1A-2029 [4] BOLT  
16. 3B-4506 [14] LOCKWASHER  
17. 2S-2817 [1] COVER  
18. 1P-3171 [1] GASKET  
19. 0S-1594 [4] BOLT  
20. 7M-4843 [2] LOCK  
21. 2S-2408 [2] PLATE  
22. 3S-3984 [2] HOUSING ASSEM.  
23. 9S-0255 [24] PIN  
24. 0L-0659 [16] STUD  
25. 9F-2247 [4] PLUG  
26. 3S-1870 [14] INSERT  
    (One-half each in 3S3984 Housing Assem.)
27. 1P-3177 [1] CAMSHAFT (Exhaust)  
28. 0L-0659 [2] STUD  
29. 1B-4203 [10] NUT  
30. 2N-0141 [1] GEAR ASSEM. (40 Teeth)  
31. 7S-2245 [1] DOWEL  
    (Part of 2N141 Assem.)
32. 5S-0330 [1] GEAR ASSEM. (40 Teeth)  
33. 7S-2245 [1] DOWEL  
    (Part of 5S330 Gear Assem.)
34. 8H-9872 [1] POINTER  
35. 3S-2891 [1] GASKET  
36. 2A-4996 [16] BOLT  
  3S-2892 [4] LOCK  
37. 5S-0331 [1] CAMSHAFT (Inlet)  
38. 2L-3845 [2] DOWEL  
39. 1P-1192 [1] RETAINER  
40. 1P-3167 [1] ADAPTER  
 

#UEG0023S0077
 

2N-4671: CAMSHAFT

CAMSHAFT (2N4671 N/S)--Part 2 of 2
Serial No. 36J363 to 36J372 inclusive
c132068 UEG0023S
2N4671 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-7344 [1] COVER  
2. 4S-8729 H SEAL 232"  
3. 7L-5542 [1] COVER  
4. 5B-9603 [26] BOLT  
5. 3B-4506 [72] LOCKWASHER  
6. 4B-4278 [54] WASHER  
7. 2S-2817 [1] COVER  
8. 1A-2029 [8] BOLT  
9. 3S-5496 [16] SEAL  
10. 0S-1571 [4] BOLT  
  4M-5397 [4] LOCK  
11. 3S-2935 [1] GASKET  
12. 1B-4203 [14] NUT  
13. 3S-2891 [1] GASKET  
14. 2N-0141 [1] GEAR ASSEM. (40 Teeth)  
  7S-2245 [1] DOWEL  
    (Part of 2N141 Assem.).
15. 2N-4724 [1] CAMSHAFT ASSEM. (Inlet L.H.)  
  2N-0147 [1] PIN (Part of 2N4724 Assem.)  
16. 1P-3171 [2] GASKET  
17. 1D-4706 [28] BOLT  
18. 8S-9191 [14] BOLT  
  9M-6527 [14] WASHER  
19. 1P-3177 [1] CAMSHAFT (Exhaust)  
20. 3S-2894 [1] GEAR ASSEM. (40 Teeth)  
21. 7S-2245 [1] DOWEL  
    (Part of 3S2894 Assem.)
22. 8H-9872 [1] POINTER  
23. 9S-1370 [1] STUD (1.812" long)  
24. 0L-0659 [1] STUD (1.375" long)  
25. 2N-0146 [1] COVER ASSEM.  
26. 2F-0194 [2] DOWEL  
    (Part of 2N146 Assem.)
27. 7L-7576 [1] SHAFT  
28. 1B-4202 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  H   ORDER BY THE FOOT
 

#UEG0023S0078
 

2N-4671: CAMSHAFT GROUP

2N4671 CAMSHAFT GROUP--Part 1 of 2
Serial No. 36J373-Up
c134001 UEG0023S
2N4671 CAMSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-5541 [1] COVER  
2. 3S-6643 [2] SHAFT ASSEM.  
3. 9F-2247 [4] PLUG  
    (2 in each 3S6643 Shaft Assem.)
4. 7L-7458 [1] COVER  
5. 2S-0813 [4] SCREW  
  8M-7587 [4] LOCK  
6. 3S-2935 [1] GASKET  
7. 3S-5496 [2] SEAL  
8. 1P-7310 [24] ARM ASSEM.  
  4S-6525 [24] DOWEL  
9. 1P-7307 [24] ROLLER ASSEM.  
10. 1P-7309 [24] PIN ASSEM.  
    (1 each in 1P7310 Assem.)
11. 2S-0323 [48] SCREW ASSEM.  
12. 2S-3992 [48] SPRING  
  2S-3991 [48] PLUNGER  
    (2 each in 1P7310 Assem.)
13. 3S-6641 [2] SHAFT ASSEM.  
  9F-2247 [4] PLUG  
    (2 in each 3S6641 Assem.)
14. 0L-1026 [2] PLUG  
15. 1A-2029 [4] BOLT  
16. 3B-4506 [14] LOCKWASHER  
17. 2S-2817 [1] COVER  
18. 1P-3171 [1] GASKET  
19. 0S-1594 [4] BOLT  
20. 7M-4843 [2] LOCK  
21. 2S-2408 [2] PLATE  
22. 3S-3984 [2] HOUSING ASSEM.  
23. 9S-0255 [24] PIN  
24. 0L-0659 [16] STUD  
25. 9F-2247 [4] PLUG  
26. 3S-1870 [14] INSERT  
    (One-half each in 3S3984 Housing Assem.)
27. 1P-3177 [1] CAMSHAFT (Exhaust)  
28. 0L-0659 [2] STUD  
29. 1B-4203 [10] NUT  
30. 2N-0141 [1] GEAR ASSEM. (40 Teeth)  
31. 7S-2245 [1] DOWEL  
    (Part of 2N141 Assem.)
32. 5S-0330 [1] GEAR ASSEM. (40 Teeth)  
33. 7S-2245 [1] DOWEL  
    (Part of 5S330 Gear Assem.)
34. 8H-9872 [1] POINTER  
35. 3S-2891 [1] GASKET  
36. 2A-4996 [16] BOLT  
  3S-2892 [4] LOCK  
37. 5S-0331 [1] CAMSHAFT (Inlet)  
38. 2L-3845 [2] DOWEL  
39. 1P-1192 [1] RETAINER  
 

#UEG0023S0079
 

2N-4671: CAMSHAFT GROUP

2N4671 CAMSHAFT GROUP--Part 2 of 2
Serial No. 36J373-Up
c134002 UEG0023S
2N4671 CAMSHAFT GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-7344 [1] COVER  
2. 4S-8729 H SEAL 232"  
3. 7L-5542 [1] COVER  
4. 5B-9603 [26] BOLT  
5. 3B-4506 [72] LOCKWASHER  
6. 0T-0431 [54] WASHER  
7. 2S-2817 [1] COVER  
8. 1A-2029 [8] BOLT  
9. 3S-5496 [16] SEAL  
10. 0S-1571 [4] BOLT  
  4M-5397 [4] LOCK  
11. 3S-2935 [1] GASKET  
12. 1B-4203 [14] NUT  
13. 3S-2891 [1] GASKET  
14. 2N-0141 [1] GEAR ASSEM. (40 Teeth)  
  7S-2245 [1] DOWEL  
    (Part of 2N141 Assem.)
15. 2N-4724 [1] CAMSHAFT ASSEM. (Inlet L.H.)  
  2N-0147 [1] PIN (Part of 2N4724 Assem.)  
16. 1P-3171 [2] GASKET  
17. 1D-4706 [28] BOLT  
18. 8S-9191 [14] BOLT  
  9M-6527 [14] WASHER  
19. 1P-3177 [1] CAMSHAFT (Exhaust)  
20. 3S-2894 [1] GEAR ASSEM. (40 Teeth)  
21. 7S-2245 [1] DOWEL  
    (Part of 3S2894 Assem.)
22. 8H-9872 [1] POINTER  
23. 9S-1370 [1] STUD (1.812" long)  
24. 0L-0659 [1] STUD (1.375" long)  
25. 2N-0146 [1] COVER ASSEM.  
26. 2F-0194 [2] DOWEL  
    (Part of 2N146 Assem.)
27. 7L-7576 [1] SHAFT  
28. 1B-4202 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  H   ORDER BY THE FOOT
 

Information:

Engine News
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material
1979/09/19
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/30
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13
Use Correct Specifications To Check Piston Ring Gaps
1981/06/03
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
Piston For Rectangular Rings Available Again
1983/07/06
New Connecting Rod And Main Bearings Used
1983/11/30
Usage Of Pistons With Rectangular Rings
1984/01/18
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
Stronger Material Used In Undersize Connecting Rod Bearings
1977/04/22
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy
1977/10/12
Reference Chart For Main And Connecting Rod Bearings
1977/11/30
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets
1978/12/13
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of 4N9001 And 4N9002 Connecting Rods{1218}
Installation Of Oversize Connecting Rod Bearings{1219}
Installation Of Oversize Connecting Rod Bearings{1219}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Pistons And Rings
D348 INDUSTRIAL & MARINE ENGINES
Pistons And Rings (With Keystone Piston Ring Groove)
D348 INDUSTRIAL & MARINE ENGINES
Connecting Rods
D348 INDUSTRIAL & MARINE ENGINES
Bearing Surface (Journal) For Connecting Rods
D348 INDUSTRIAL & MARINE ENGINES
Connecting Rod Bearings
D348 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Disassembly and Assembly
Connecting Rod Bearings
D348 INDUSTRIAL & MARINE ENGINES
Pistons
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Use Correct Specifications To Check Piston Ring Gaps{1215}
1981/05/25
Do Not Use "V" Mark As Reference To Install Pistons With Keystone-Type Rings{1214,1215}
1981/12/07
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Usage Of Pistons With Rectangular Rings{1214,1215}
1984/01/09
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Stronger Material Used In Undersize Connecting Rod Bearings{1219}
1977/04/18
New Main And Connecting Rod Bearings Are Made Of Higher Strength Material{1230}
1977/08/22
Improved Oversize And Undersize Connecting Rod And Main Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/10/10
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D348 :

FLYWHEEL ASSEMBLY
7L-4261 FLYWHEEL ASSEMBLY
CONNECTING ROD AND PISTON
2S-0708 CONNECTING ROD AND PISTON
FLYWHEEL
7L-4261 FLYWHEEL
GASKET KITS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT REPLACEMENT BEARINGS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
6N-1675 BEARING AND ROD KIT
DRIVE GP-CAMSHAFT
7L-4489 DRIVE GP-CAMSHAFT
DRIVE GP-CAMSHAFT
7L-4489 DRIVE GP-CAMSHAFT
CAMSHAFT
7L-4734 CAMSHAFT
CAMSHAFT
7L-4734 CAMSHAFT
CAMSHAFT
2N-4671 CAMSHAFT
CAMSHAFT
2N-4671 CAMSHAFT
CAMSHAFT GROUP
2N-4671 CAMSHAFT GROUP

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.