AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7L8708 WOODWARD GOVERNOR GROUP--Type 2 Serial No. 36J1 to 36J362 inclusive 8L8919 Governor parts are shown on Page 86F D348


FUEL SYSTEM
GOVERNOR GP

INDUSTRIAL ENGINE D348 INDUSTRIAL ENGINE 36J
 D348 ENGINE 36J00001-00560 UEG0023S D348 36J   (1968)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR SERVICE GROUP
4N-4777 GOVERNOR SERVICE GROUP
WOODWARD GOVERNOR GROUP
7L-8708 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
7L-8708 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
7L-8708 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
2N-0503 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
2N-0503 WOODWARD GOVERNOR GROUP
 

#UEG0023S0370
 

7L-8708: WOODWARD GOVERNOR GROUP

7L8708 WOODWARD GOVERNOR GROUP--Type 2
Serial No. 36J1 to 36J362 inclusive
8L8919 Governor parts are shown on Page 86F
c136903 UEG0023S
7L8708 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-4576 [1] NAMEPLATE  
2. 3L-3911 [1] SWITCH (Toggle)  
3. 1N-8276 [1] LEVER  
4. 3B-4504 [2] LOCKWASHER  
  4B-4276 [4] WASHER  
5. 1B-4330 [2] NUT  
6. 2N-3789 [1] LINK ASSEM.  
  8L-5781 [1] GUIDE  
7. 1B-4203 [1] NUT  
8. 8L-5778 [1] SPRING  
9. 3H-4976 [1] ROD END  
10. 2B-1940 [1] NUT  
11. 2N-3787 [1] NUT  
12. 2N-3788 [1] ROD  
13. 6F-0612 [1] NUT  
  6L-7751 [1] ROD END  
14. 1B-7182 [1] BOLT  
  1D-4716 [1] NUT  
15. 8L-8919 YC [1] GOVERNOR  
    (See Separate Illustration)
16. 5M-6214 C [1] PLUG  
17. 7L-6361 [1] CHANNEL ASSEM.  
18. 1D-4538 [4] BOLT  
  4B-5270 [4] WASHER  
19. 3L-3825 [4] SPACER  
20. 9F-6580 [1] BOLT  
21. [1] ADAPTER ASSEM.  
22. 4J-9780 [1] PLUG  
23. 8H-9180 [1] SEAL  
24. [1] BEARING  
25. 5B-2113 [1] BEARING  
26. 3D-4603 C [1] PLUG  
27. 6L-2142 [4] BUSHING  
28. 5F-1749 [4] DOWEL  
    (Parts of 7L8706 Assem.)
29. 1N-8288 [1] GEAR (20 Teeth)  
30. 5L-4828 [4] KEY  
31. 7L-8472 [1] SHAFT  
  2J-6356 [1] RING  
32. 7L-4985 [1] SCREW  
  2L-1331 [1] NUT  
  2L-1333 [1] LOCK  
33. 0S-1588 [2] BOLT (1.25" long)  
34. 0S-1571 [3] BOLT (1.75" long)  
35. 7L-8499 [1] LEVER ASSEM.  
36. 7L-8433 [1] SHAFT  
  5B-4690 [1] PIN  
37. 7H-3639 [1] PIN  
    (Parts of 7L8499 Assem.)
38. 3S-2130 [1] PLATE  
39. 3S-2129 [1] PINION (14 Teeth)  
40. 9F-7283 [1] SEAL  
41. 1S-7104 [1] SEAL  
42. 2H-3738 [1] BOLT  
  1M-7390 [1] LOCK  
43. 2A-0762 [2] BOLT  
  7M-0168 [1] LOCK  
44. 3B-4505 [5] LOCKWASHER  
45. 8L-5790 [1] LEVER  
46. 7H-7954 [2] BOLT  
47. 7L-8655 [1] GASKET  
48. 1L-3047 [2] WASHER  
49. 1N-8290 [1] GEAR (33 Teeth)  
50. 5L-4804 [1] SLEEVE ASSEM.  
51. 7L-8496 [1] SPACER  
  2A-4639 [1] BOLT  
52. 0L-2070 [4] BOLT  
53. 6L-3401 [1] GASKET  
54. 7M-8410 [1] PIN  
55. 3B-4506 [12] LOCKWASHER  
56. 2A-5546 [1] BOLT  
  [1] WIRING DIAGRAM  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0023S0371
 

7L-8708: WOODWARD GOVERNOR GROUP

7L8708 WOODWARD GOVERNOR GROUP--Type 3
Serial No. 36J1 to 36J362 inclusive
8L8919 Governor parts are shown on Page 86F
c136904 UEG0023S
7L8708 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-4576 [1] NAMEPLATE  
2. 3L-3911 [1] SWITCH (Toggle)  
3. 1N-8276 [1] LEVER  
4. 3B-4504 [2] LOCKWASHER  
  4B-4276 [4] WASHER  
5. 1B-4330 [2] NUT  
  2N-3789 [1] LINK ASSEM.  
6. 3H-4976 [1] ROD END  
7. 1B-4203 [1] NUT  
8. 8L-5778 [1] SPRING  
9. 2N-6982 C [1] GUIDE ASSEM.  
10. 1H-3244 C [1] LOCKWASHER  
11. 2N-3788 [1] ROD  
12. 6F-0612 [1] NUT  
  6L-7751 [1] ROD END  
13. 1A-2029 C [2] BOLT  
14. 1B-7182 [1] BOLT  
  1D-4716 [1] NUT  
15. 8L-8919 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
16. 5M-6214 [1] PLUG  
17. 7L-6361 [1] CHANNEL ASSEM.  
18. 1D-4538 [4] BOLT  
  4B-5270 [4] WASHER  
19. 3L-3825 [4] SPACER  
20. 9F-6580 [1] BOLT  
21. 7L-8706 [1] ADAPTER ASSEM.  
22. 4J-9780 [1] PLUG  
23. 8H-9180 [1] SEAL  
24. 4B-2090 [1] BEARING  
25. 5B-2113 [1] BEARING  
26. 3D-4603 [1] PLUG  
27. 6L-2142 [4] BUSHING  
28. 5F-1749 [4] DOWEL  
29. 1N-8288 [1] GEAR (20 Teeth)  
30. 5L-4828 [4] KEY  
31. 7L-8472 [1] SHAFT  
  2J-6356 [1] RING  
32. 7L-4985 [1] SCREW  
  2L-1331 [1] NUT  
  2L-1333 [1] LOCK  
33. 0S-1588 [2] BOLT (1.25" long)  
34. 0S-1571 [3] BOLT (1.75" long)  
35. 7L-8499 [1] LEVER ASSEM.  
36. 7L-8433 [1] SHAFT  
  5B-4690 [1] PIN  
37. 7H-3639 [1] PIN  
38. 3S-2130 [1] PLATE  
39. 3S-2129 [1] PINION (14 Teeth)  
40. 9F-7283 [1] SEAL  
41. 1S-7104 [1] SEAL  
42. 2H-3738 [1] BOLT  
  1M-7390 [1] LOCK  
43. 2A-0762 [2] BOLT  
  7M-0168 [1] LOCK  
44. 3B-4505 [5] LOCKWASHER  
45. 8L-5790 [1] LEVER  
46. 7H-7954 [2] BOLT  
47. 7L-8655 [1] GASKET  
48. 1L-3047 [2] WASHER  
49. 1N-8290 [1] GEAR (33 Teeth)  
50. 5L-4804 [1] SLEEVE ASSEM.  
51. 7L-8496 [1] SPACER  
  2A-4639 [1] BOLT  
52. 0L-2070 [4] BOLT  
53. 6L-3401 [1] GASKET  
54. 7M-8410 [1] PIN  
55. 3B-4506 C [16] LOCKWASHER  
56. 2A-5546 [1] BOLT  
57. 2N-3919 C [1] PLATE  
  2N-3920 [6] SHIM  
58. 8H-3127 C [1] BOLT  
  1B-4427 [1] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0023S0372
 

2N-0503: WOODWARD GOVERNOR GROUP

2N503 WOODWARD GOVERNOR GROUP--Type 1
Serial No. 36J363-Up
2N6262 Shut-Off and 8L8919 Governor parts are shown on Pages 82D and 86F
c144169 UEG0023S
2N0503 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8919 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
2. 4B-3388 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
3. 4N-3992 [1] LEVER ASSEM.  
  4N-6917 C [1] LEVER ASSEM.  
  4N-6916 [1] LEVER  
4. 2N-6341 [1] PIN  
  8F-4610 [1] RING  
  1K-0502 [1] WASHER  
5. 2N-6345 [1] SPRING  
6. 2N-7353 [1] CLAMP  
7. 2N-7268 [1] ROD ASSEM.  
  2N-7211 [1] ROD  
  7H-3639 [1] PIN  
8. 4F-2294 [1] NUT  
9. 7L-4186 [1] ROD END  
10. 2R-0504 [1] NUT  
11. 7H-3641 [1] ROD END  
12. 4F-2294 [1] NUT  
13. 7H-7954 [2] BOLT  
14. 3B-4506 [11] LOCKWASHER  
15. 1N-9993 [1] HOUSING ASSEM.  
  1N-8373 [1] HOUSING  
  5H-1472 [1] BALL  
16. 9M-4314 [1] PLUG  
17. 8L-2654 [1] PLUG  
18. 4H-0921 [2] BEARING  
19. 2S-7905 [2] PLUG  
20. 2A-3630 [2] DOWEL  
21. 2M-2489 [1] SEAL  
22. 1F-4622 [1] BEARING  
23. 5M-6228 [1] BEARING  
24. 6L-2142 [2] BUSHING  
25. 1N-9990 [1] SHAFT  
  2N-8611 [2] RING  
26. 1N-8424 [1] GEAR (20 Teeth)  
27. 2N-8613 [1] WASHER  
28. 5M-6214 [2] PLUG  
29. 0S-1591 [3] BOLT  
30. 2N-9421 [1] SPRING  
31. 9F-7283 [1] SEAL  
32. 2N-8807 [1] SHAFT ASSEM.  
  1N-9991 [1] SHAFT  
33. 2N-3925 [1] COLLAR  
  2L-3605 [1] PIN  
34. 1N-9992 [1] PINION (14 Teeth)  
35. 9F-6580 [1] BOLT  
  7H-8909 [1] NUT  
36. 3B-4504 [5] LOCKWASHER  
37. 1N-9997 [1] LEVER  
38. 1S-0219 [1] BOLT  
  2F-4159 [1] LOCK  
39. 1N-9998 [1] SHAFT  
40. 5S-9507 [1] SCREW  
41. 5S-9607 [1] NUT  
42. 8L-4891 [1] BOLT  
43. 7S-9352 [1] LEVER  
44. 1S-7105 [1] PIN  
45. 1S-7104 [1] SEAL  
46. 8L-6334 [1] LEVER  
  1B-8701 [1] KEY  
47. 0S-1614 [2] BOLT  
48. 1N-8391 [1] COVER  
  1N-8390 [1] GASKET  
49. 1A-2029 [1] BOLT  
50. 2N-8613 [1] WASHER  
51. 3R-6569 [2] BOLT  
52. 1A-5964 [1] BOLT  
53. 1N-8423 [1] GEAR (33 Teeth)  
54. 1N-9994 [1] COUPLING  
55. 2N-7296 [1] SUPPORT  
56. 0S-0509 [2] BOLT  
57. 6L-3401 [1] GASKET  
58. 7H-7954 [2] BOLT  
59. 3L-4576 [1] NAMEPLATE  
60. 3L-3911 [1] SWITCH  
  2N-6262 YH [1] SHUTOFF GROUP  
    (Separate Illustration)
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0023S0373
 

2N-0503: WOODWARD GOVERNOR GROUP

2N503 WOODWARD GOVERNOR GROUP--Type 2
Serial No. 36J363-Up
2N6262 Manual Shut-Off and 3N2174 Governor parts are shown on Pages 82D & 86E
c144170 UEG0023S
2N0503 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2174 Y [1] GOVERNOR  
    (Separate Illustration)
2. 4B-3388 [1] BOLT  
  3B-4505 [1] LOCKWASHER  
3. 4N-3992 [1] LEVER ASSEM.  
  4N-6917 C [1] LEVER ASSEM.  
  4N-6916 [1] LEVER  
4. 2N-6341 [1] PIN  
  8F-4610 [1] RING  
  1K-0502 [1] WASHER  
5. 2N-6345 [1] SPRING  
6. 2N-7353 [1] CLAMP  
7. 2N-7268 [1] ROD ASSEM.  
  2N-7211 [1] ROD  
  7H-3639 [1] PIN  
8. 4F-2294 [1] NUT  
9. 7L-4186 [1] ROD END  
10. 2R-0504 [1] NUT  
11. 7H-3641 [1] ROD END  
12. 4F-2294 [1] NUT  
13. 7H-7954 [2] BOLT  
14. 3B-4506 [11] LOCKWASHER  
15. 1N-9993 [1] HOUSING ASSEM.  
  1N-8373 [1] HOUSING  
  5H-1472 [1] BALL  
16. 9M-4314 [1] PLUG  
17. 8L-2654 [1] PLUG  
18. 4H-0921 [2] BEARING  
19. 2S-7905 [2] PLUG  
20. 2A-3630 [2] DOWEL  
21. 2M-2489 [1] SEAL  
22. 1F-4622 [1] BEARING  
23. 5M-6228 [1] BEARING  
24. 6L-2142 [2] BUSHING  
25. 1N-9990 [1] SHAFT  
  2N-8611 [2] RING  
26. 1N-8424 [1] GEAR (20 Teeth)  
27. 2N-8613 [1] WASHER  
28. 5M-6214 [2] PLUG  
29. 0S-1591 [3] BOLT  
30. 2N-9421 [1] SPRING  
31. 9F-7283 [1] SEAL  
72. 2N-8807 [1] SHAFT ASSEM.  
  1N-9991 [1] SHAFT  
33. 2N-3925 [1] COLLAR  
  2L-3605 [1] PIN  
34. 1N-9992 [1] PINION (14 Teeth)  
35. 9F-6580 [1] BOLT  
  7H-8909 [1] NUT  
36. 3B-4504 [5] LOCKWASHER  
37. 1N-9997 [1] LEVER  
38. 1S-0219 [1] BOLT  
  2F-4159 [1] LOCK  
39. 1N-9998 [1] SHAFT  
40. 5S-9507 [1] SCREW  
41. 5S-9607 [1] NUT  
42. 8L-4891 [1] BOLT  
43. 7S-9352 [1] LEVER  
44. 1S-7105 [1] PIN  
45. 1S-7104 [1] SEAL  
46. 8L-6334 [1] LEVER  
  1B-8701 [1] KEY  
47. 0S-1614 [2] BOLT  
48. 1N-8391 [1] COVER  
  1N-8390 [1] GASKET  
49. 1A-2029 [1] BOLT  
50. 2N-8613 [1] WASHER  
51. 3R-6569 [2] BOLT  
52. 1A-5964 [1] BOLT  
53. 1N-8423 [1] GEAR (33 Teeth)  
54. 1N-9994 [1] COUPLING  
55. 2N-7296 [1] SUPPORT  
56. 0S-0509 [2] BOLT  
57. 6L-3401 [1] GASKET  
58. 7H-7954 [2] BOLT  
59. 3L-4576 [1] NAMEPLATE  
60. 3L-3911 [1] SWITCH  
  2N-6262 YH [1] SHUTOFF GROUP  
    (Separate Illustration)
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0023S0374
 

2N-0503: WOODWARD GOVERNOR GROUP

2N503 WOODWARD GOVERNOR GROUP--Type 3
Serial No. 36J363-Up
2N6262 Manual Shut-Off and 3N2174 Governor parts are shown on Pages 82D & 86E
c145317 UEG0023S
2N0503 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-2174 J [1] GOVERNOR  
2. 4B-3388 [1] BOLT  
  3B-4505 [1] LOCKWASHER  
3. 4N-3992 [1] LEVER ASSEM.  
  4N-6917 [1] LEVER ASSEM.  
  4N-6916 [1] LEVER  
4. 2N-6341 [1] PIN  
  8F-4610 [1] RING  
  1K-0502 [1] WASHER  
5. 2N-6345 [1] SPRING  
6. 2N-7353 [1] CLAMP  
7. 2N-7268 [1] ROD ASSEM.  
  2N-7211 [1] ROD  
  7H-3639 [1] PIN  
8. 4F-2294 [1] NUT  
9. 7L-4186 [1] ROD END  
10. 2R-0504 [1] NUT  
11. 7H-3641 [1] ROD END  
12. 4F-2294 [1] NUT  
13. 7H-7954 [2] BOLT  
14. 3B-4506 [11] LOCKWASHER  
15. 4N-5189 C [1] HOUSING ASSEM.  
  5H-1472 [1] BALL  
17. 8L-2654 [1] PLUG  
18. 4H-0921 [2] BEARING  
19. 2S-7905 [2] PLUG  
20. 2A-3630 [2] DOWEL  
21. 2M-2489 [1] SEAL  
22. 1F-4622 [1] BEARING  
23. 5M-6228 [1] BEARING  
24. 6L-2142 [2] BUSHING  
25. 2B-2695 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
26. 4N-5357 [1] COVER  
  4N-5356 [1] GASKET  
27. 5J-7389 [1] PLUG  
28. 3M-7045 [1] PLUG  
29. 0S-1591 [3] BOLT  
30. 2N-9421 [1] SPRING  
31. 9F-7283 [1] SEAL  
32. 2N-8807 [1] SHAFT ASSEM.  
  1N-9991 [1] SHAFT  
33. 2N-3925 [1] COLLAR  
  2L-3605 [1] PIN  
34. 1N-9992 [1] PINION (14 teeth)  
35. 9F-6580 [1] BOLT  
  7H-8909 [1] NUT  
36. 3B-4504 [5] LOCKWASHER  
37. 1N-9997 [1] LEVER  
38. 1S-0219 [1] BOLT  
  2F-4159 [1] LOCK  
39. 1N-9998 [1] SHAFT  
40. 5S-9507 [1] SCREW  
41. 5S-9607 [1] NUT  
42. 8L-4891 [1] BOLT  
43. 7S-9352 [1] LEVER  
44. 1S-7105 [1] PIN  
45. 1S-7104 [1] SEAL  
46. 8L-6334 [1] LEVER  
  1B-8701 [1] KEY  
47. 0S-1614 [2] BOLT  
48. 1N-8391 [1] COVER  
  1N-8390 [1] GASKET  
49. 1A-2029 [1] BOLT  
50. 2N-8613 [1] WASHER  
51. 3R-6569 [2] BOLT  
52. 1A-5964 [1] BOLT  
53. 1N-8423 [1] GEAR (33 teeth)  
54. 1N-9994 [1] COUPLING  
55. 2N-7296 [1] SUPPORT  
56. 0S-0509 [2] BOLT  
57. 6L-3401 [1] GASKET  
58. 7H-7954 [2] BOLT  
59. 3L-4576 [1] NAMEPLATE  
60. 3L-3911 [1] SWITCH  
61. 1N-9990 [1] SHAFT  
  2N-8611 [2] RING  
62. 1N-8424 [1] GEAR (20 teeth)  
63. 2N-8613 [1] WASHER  
64. 5M-6213 C [2] PLUG  
65. 5M-6214 [2] PLUG  
  2N-6262 JH [1] SHUTOFF GROUP  
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  J   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0023S0375
 

2N-0503: WOODWARD GOVERNOR GROUP

2N503 WOODWARD GOVERNOR GROUP--Type 4
Serial No. 36J363-Up
2N6262 Manual Shut-Off and 3N2174 Governor parts are shown on Pages 82D & 86E
c206901 UEG0023S
2N0503 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-3388 [1] BOLT  
  3B-4505 [1] LOCKWASHER  
2. 4N-3992 [1] LEVER ASSEM.  
  4N-6917 [1] LEVER ASSEM.  
  4N-6916 [1] LEVER  
3. 5B-8075 C [1] PIN (small)  
4. 2N-6341 [1] PIN (large)  
  6H-5474 C [1] RING  
  1K-0502 [1] WASHER  
5. 2N-6345 [1] SPRING  
6. 2N-7353 [1] CLAMP  
7. 2N-7268 [1] ROD ASSEM.  
  2N-7211 [1] ROD  
  7H-3639 [1] PIN  
8. 4F-2294 [1] NUT  
9. 7L-4186 [1] ROD END  
10. 2R-0504 [1] NUT  
11. 7H-3641 [1] ROD END  
12. 4F-2294 [1] NUT  
13. 7H-7954 [2] BOLT  
14. 3B-4506 C [10] LOCKWASHER  
15. 3N-2174 J [1] GOVERNOR  
16. 4N-5189 [1] HOUSING ASSEM.  
  5H-1472 [1] BALL  
17. 3D-4603 C [2] PLUG  
18. 4H-0921 [2] BEARING  
19. 2S-7905 [2] PLUG  
20. 2A-3630 [2] DOWEL  
21. 2M-2489 [1] SEAL  
22. 1F-4622 [1] BEARING  
23. 5M-6228 [1] BEARING  
24. 6L-2142 [2] BUSHING  
25. 2B-2695 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
26. 4N-5357 [1] COVER  
  4N-5356 [1] GASKET  
27. 5J-7389 [1] PLUG  
28. 3M-7045 [1] PLUG  
29. 0S-1591 [2] BOLT  
30. 2N-9421 [1] SPRING  
31. 9F-7283 [1] SEAL  
32. 2N-8807 [1] SHAFT ASSEM.  
  1N-9991 [1] SHAFT  
33. 2N-3925 [1] COLLAR  
  2L-3605 [1] PIN  
34. 1N-9992 [1] PINION (14 teeth)  
35. 9F-6580 [1] BOLT  
  7H-8909 [1] NUT  
36. 3B-4504 [5] LOCKWASHER  
37. 1N-9997 [1] LEVER  
38. 1S-0219 [1] BOLT  
  2F-4159 [1] LOCK  
39. 1N-9998 [1] SHAFT  
40. 5S-9507 [1] SCREW  
41. 5S-9607 [1] NUT  
42. 8L-4891 [1] BOLT  
43. 7S-9352 [1] LEVER  
44. 1S-7105 [1] PIN  
45. 1S-7104 [1] SEAL  
46. 8L-6334 [1] LEVER  
  1B-8701 [1] KEY  
47. 0S-1614 [2] BOLT  
48. 1N-8391 [1] COVER  
  1N-8390 [1] GASKET  
49. 1A-2029 [1] BOLT  
50. 2N-8613 [1] WASHER  
51. 3R-6569 [2] BOLT  
52. 1A-5964 [1] BOLT  
53. 1N-8423 [1] GEAR (33 teeth)  
54. 1N-9994 [1] COUPLING  
55. 2N-7296 [1] SUPPORT  
56. 0S-0509 [2] BOLT  
57. 6L-3401 [1] GASKET  
58. 7H-7954 [2] BOLT  
59. 3L-4576 [1] NAMEPLATE  
60. 3L-3911 [1] SWITCH  
61. 1N-9990 [1] SHAFT  
  2N-8611 [2] RING  
62. 1N-8424 [1] GEAR (20 teeth)  
63. 2N-8613 [1] WASHER  
64. 5M-6213 [2] PLUG  
65. 5M-6214 [2] PLUG  
66. 8F-8544 C [1] BOLT  
  1B-4218 [1] WASHER  
  2N-6262 JH [1] SHUTOFF GROUP  
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  J   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0023S0376
 

3N-2174: WOODWARD GOVERNOR GROUP

3N2174 WOODWARD GOVERNOR GROUP
Serial No. 36J363-Up
Part of 2N503 Woodward Governor Group shown on Pages 86D and 86D-2
c140877 UEG0023S
3N2174 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9F-9626 [1] BUSHING  
  3L-2401 [1] GAUGE  
  3L-2402 [1] ELBOW  
  6L-4304 [1] CONTROLET ASSEM.  
  3L-6745 [1] CONTROLET ASSEM.  
    (Part of 6L4304 Assem.)
  6L-4252 [1] PANEL ASSEM.  
  2F-6766 [1] GEAR ASSEM.  
    (Part of 6L4252 Assem.)
  3H-8076 [1] PISTON ASSEM.  
  5H-6500 [1] COVER ASSEM.  
  9F-9597 [1] GEAR (17 Teeth)  
    (Parts of 6L4304 Assem.)
  2F-6814 [1] PLUNGER  
  3L-6778 [1] PLATE  
  2F-7318 [1] GEAR ASSEM.  
  7L-8458 [1] SPRING  
  5H-6503 [1] LEVER  
    (Parts of 5H6500 Assem.)
  9F-9635 [2] SEAT  
    (Part of 3L6745 Assem.)
  9F-9596 [1] DRIVE ASSEM.  
  9F-9599 [1] DRIVE ASSEM.  
    (Part of 9F9596 Assem.)
  6L-5417 [1] SPRING  
    (Parts of 6L4304 Assem.)
  3L-6746 [1] SEAT  
  2F-6818 [2] PISTON  
  2F-6802 [2] SPRING  
  9F-9630 [4] RING  
  3H-8275 [4] PLUG  
  2F-6707 [2] VALVE ASSEM.  
    (Parts of 3L6745 Assem.)
  6L-4249 [1] BASE ASSEM.  
  2F-6674 [1] SHAFT  
    (Part of 6L4249 Assem.)
  6L-4251 [1] COVER AND MOTOR ASSEM.  
  2F-6761 [1] SPRING  
  3N-3366 [1] SPRING ASSEM.  
  5H-6475 [1] ROD ASSEM.  
  5H-6477 [1] NUT  
  2F-6686 [1] BEARING  
  2F-6689 [1] SPRING  
  5H-6476 [1] ROD & PIN ASSEM.  
    (Parts of 5H6475 Assem.)
  3N-3685 [1] BALLHEAD ASSEM.  
  3N-3367 [1] CASE ASSEM.  
  2N-1922 [1] PIN  
  4B-4863 [1] WASHER  
  2F-6713 [1] COTTER PIN  
    (Parts of 5H6500 Assem.)
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6L-3629 [1] KIT (Hardware)  
    (Includes Pointers, Pins, Rings, Laminations, Washers, Nuts, "O" Rings, Lockwashers, Seals, Cotter Pins, Lockwire and Screws)
  6L-4227 [1] KIT (Gasket)  
    (Includes Gaskets)
  6L-4299 [1] KIT (Repair)  
    (Includes Valve Assemblies, Pins, Plugs, Bearings, Springs, Studs, Cover Assembly, Pistons, Knobs, Ring, Set Screws, Washer and Seat)
 

#UEG0023S0377
 

8L-8919: GOVERNOR GP-WOODWARD

8L8919 WOODWARD GOVERNOR GROUP
Part of 7L8708 and 2N503 Woodward Governor Groups shown on Pages 86A, 86B & 86C
c136897 UEG0023S
8L8919 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3L-2401 [1] GAUGE  
  3L-2402 [1] ELBOW  
  6L-4304 [1] CONTROLET ASSEM.  
  3L-6745 [1] CONTROLET ASSEM.  
    (Part of 6L4304 Assem.)
  6L-4252 [1] PANEL ASSEM.  
  2F-6766 [1] GEAR ASSEM.  
    (Part of 6L4252 Assem.)
  3H-8076 [1] PISTON ASSEM.  
  5H-6500 [1] COVER ASSEM.  
  9F-9597 [1] GEAR (17 Teeth)  
    (Parts of 6L4304 Assem.)
  2F-6814 [1] PLUNGER  
  3L-6778 [1] PLATE  
  2F-7318 [1] GEAR ASSEM.  
  7L-8458 [1] SPRING  
  5H-6503 [1] LEVER  
    (Parts of 5H6500 Assem.)
  9F-9635 [2] SEAT  
    (Part of 3L6745 Assem.)
  9F-9596 [1] DRIVE ASSEM.  
  9F-9599 [1] DRIVE ASSEM.  
    (Part of 9F9596 Assem.)
  6L-5417 [1] SPRING  
    (Parts of 6L4304 Assem.)
  2F-6700 [12] LAMINATION  
  6L-5602 [1] SLEEVE  
  3K-4897 [1] PIN  
  9F-9598 [1] GEAR ASSEM.  
    (Parts of 6L4304 Assem.)
  3L-6746 [1] SEAT  
  2F-6818 [2] PISTON  
  2F-6802 [2] SPRING  
  9F-9630 [4] RING  
  3H-8275 [4] PLUG  
  2F-6707 [2] VALVE ASSEM.  
    (Parts of 3L6745 Assem.)
  6L-4249 [1] BASE ASSEM.  
  2F-6674 [1] SHAFT  
    (Part of 6L4249 Assem.)
  6L-4251 [1] COVER AND MOTOR ASSEM.  
  2F-6761 [1] SPRING  
  3N-3366 [1] SPRING ASSEM.  
  5H-6475 [1] ROD ASSEM.  
  5H-6477 [1] NUT  
  2F-6686 [1] BEARING  
  2F-6689 [1] SPRING  
  5H-6476 [1] ROD & PIN ASSEM.  
    (Parts of 5H6475 Assem.)
  3N-3685 [1] BALLHEAD ASSEM.  
  3N-3367 [1] CASE ASSEM.  
  2N-1922 [1] PIN  
  4B-4863 [1] WASHER  
  2F-6713 [1] COTTER PIN  
    (Parts of 5H6500 Assem.)
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  6L-3629 [1] KIT (Hardware)  
    (Includes Pointers, Pins, Rings, LAMINATIONS, WASHERS, NUTS, "O"-RINGS, LOCKWASHERS, SEALS, COTTER PINS, LOCKWIRE AND SCREWS)
  6L-4227 [1] KIT (Gasket)  
    (Includes Gaskets)
  6L-4299 [1] KIT (Repair)  
    (Includes Valve Assemblies, PINS, PLUGS, BEARINGS, SPRINGS, STUDS, COVER ASSEMBLY, PISTONS, KNOBS, RING, SET SCREWS, WASHER AND SEAT)
 

#UEG0023S0378
 

4N-5190: WOODWARD GOVERNOR DRIVE GROUP

4N5190 WOODWARD GOVERNOR DRIVE GROUP--Electric--Part 1 of 3--Type 1
Note: 2N9045 Actuator is available
c148112 UEG0023S
4N5190 WOODWARD GOVERNOR DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-9575 [1] BOLT  
2. 4B-4277 [1] WASHER  
3. 4B-3388 [1] BOLT  
4. 3B-4505 [1] LOCKWASHER  
5. 4N-3996 [1] LEVER ASSEM.  
    (Includes)
  4N-6916 [1] LEVER  
  2N-6345 [1] SPRING  
6. 2N-6341 [1] PIN  
  6H-5474 [1] RING  
  1K-0502 [1] WASHER  
  5B-8075 [1] PIN (small)  
7. 2N-9398 [1] CLAMP  
8. 2R-0504 [1] NUT  
9. 7H-3641 [1] ROD END  
10. 4F-2294 [1] NUT  
11. 8L-8424 [1] CONNECTOR  
12. 2N-9403 [1] ROD ASSEM.  
    (Includes)
  9L-0274 [1] ROD  
  7H-3639 [1] PIN  
13. 7L-4186 [1] ROD END  
14. 4F-2294 [1] NUT  
15. 8L-5855 [1] COUPLING  
16. 1N-8424 [1] GEAR (20 teeth)  
17. 2N-8611 [2] RING  
18. 2N-8613 [1] WASHER  
19. 2N-9421 [1] SPRING  
20. 2N-8807 [1] SHAFT ASSEM.  
    (Includes)
  1N-9991 [1] SHAFT  
21. 2N-3925 [1] COLLAR  
  2L-3605 [1] PIN  
22. 8L-6334 [1] LEVER  
  1B-8701 [1] KEY  
23. 1A-2029 [1] BOLT  
24. 3B-4506 [1] LOCKWASHER  
25. 1S-5923 [1] WASHER  
26. 1N-8423 [1] GEAR (33 teeth)  
27. 2N-9404 [1] SHAFT  
28. 4N-5189 [1] HOUSING ASSEM.  
    (Includes)
  5H-1472 [1] BALL  
29. 2B-2695 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
30. 4N-5357 [1] COVER  
  4N-5356 [1] GASKET  
31. 5J-7389 [1] PLUG  
32. 4H-0921 [2] BEARING  
33. 6L-2142 [2] BUSHING  
34. 2A-3630 [2] DOWEL  
35. 2M-2489 [1] SEAL  
36. 1F-4622 [1] BEARING  
37. 5N-6228 [1] BEARING  
38. 2S-7905 [2] PLUG  
39. 3M-7045 [1] PLUG  
40. 3D-4603 [2] PLUG  
41. 1N-9998 [1] SHAFT  
42. 5S-9507 [1] SCREW  
43. 5S-9607 [1] NUT  
44. 8L-4891 [1] BOLT  
45. 9F-6580 [1] BOLT  
46. 7H-8909 [1] NUT  
  3B-4504 [1] LOCKWASHER  
47. 1S-0219 [1] BOLT  
  2F-4159 [1] LOCK  
48. 1N-9997 [1] LEVER  
49. 9F-2247 C [1] PLUG  
  C   INDICATES CHANGE
 

#UEG0023S0379
 

4N-5190: WOODWARD GOVERNOR DRIVE GROUP

4N5190 WOODWARD GOVERNOR DRIVE GROUP--Electric--Part 2 of 3--Type 1
2N6262 Manual Shut-Off parts are shown on Page 82D
c145599 UEG0023S
4N5190 WOODWARD GOVERNOR DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D348 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG  
2. 4N-5187 [1] TUBE ASSEM.  
3. 5K-9246 [1] CONNECTOR  
4. 3B-4506 [8] LOCKWASHER  
5. 3B-4505 [2] LOCKWASHER  
6. 1N-5946 [2] STUD  
7. 1B-4202 [2] NUT  
8. 6L-3528 [1] GASKET  
9. 1A-5964 [1] BOLT  
10. 0S-1594 [4] BOLT  
11. 5L-9200 [1] ADAPTER  
12. 6L-3401 [1] GASKET  
13. 2N-7296 [1] SUPPORT  
14. 0S-0509 [2] BOLT  
15. 1L-6939 [1] FITTING  
16. 0S-1591 [3] BOLT  
17. 9F-7283 [1] SEAL  
18. 1N-9992 [1] PINION  
19. 7S-9352 [1] LEVER  
20. 1S-7105 [1] PIN  
21. 1S-7104 [1] SEAL  
22. 0S-1614 [2] BOLT  
23. 3B-4504 [4] LOCKWASHER  
24. 1N-8391 [1] COVER  
25. 1N-8390 [1] GASKET  
26. 3R-6569 [2] BOLT  
  2N-6262 YJ [1] SHUT OFF GROUP  
    (Separate Illustration)
  J   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Improved Woodward Governor Groups
1979/01/10
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Service Kit Is Available For Woodward UG8 Governor
1979/09/19
New Plug With Straight-Threads Used In Engine Variable Timing Drive
1980/06/04
Woodward Governor Available For Parallel Generator Applications
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Use The Correct Governor For Parallel Applications
1982/02/24
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Governor Drive Gears And Weight Assemblies
1983/09/14
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
Hydramechanical Governor Fuel Setting Information
1985/06/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Spring Used In Fuel Ratio Control
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Improved Gasket Prevents Oil Leakage From The Governor
1978/01/18
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 8N4904 Printed Circuit Board Conversion Kit For Woodward UG8 Governors{1264, 1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Service Letter-NACD
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Equipment
D348 INDUSTRIAL & MARINE ENGINES
Governor
D348 INDUSTRIAL & MARINE ENGINES
Governor Linkage Adjustment
D348 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump<BR> (7L7566) (2N799) (2N144) (3N2078)
D348 INDUSTRIAL & MARINE ENGINES
Variable Timing Drive For The Fuel Injection Pump Camshaft<BR> (4S9498) (4N6680)
D348 INDUSTRIAL & MARINE ENGINES
Governor Actuator<BR> (Woodward EG-3P)
D348 INDUSTRIAL & MARINE ENGINES
Governor<BR> (Woodward UG-8)
D348 INDUSTRIAL & MARINE ENGINES
Governor Air Actuator Linkage
D348 INDUSTRIAL & MARINE ENGINES
Governor Air Actuators<BR> (2N6006, 1N9318)
D348 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump (Earlier Engine)
D348 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump (Later Engine)
D348 INDUSTRIAL & MARINE ENGINES
Variable Timing Unit
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
D348 INDUSTRIAL & MARINE ENGINES
Governor
D348 INDUSTRIAL & MARINE ENGINES
Governor (Earlier Engine)
D348 INDUSTRIAL & MARINE ENGINES
Governor (Later)
D348 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
D348 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Plug With Straight-Threads Used In Engine Variable Timing Drive{1272}
1980/05/19
Woodward Governor Available For Parallel Generator Applications{1289,1264}
1981/04/06
Use The Correct Governor For Parallel Applications{1289,1264}
1982/02/22
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Gasket Prevents Oil Leakage From The Governor{1264}
1978/01/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Improved Woodward Governor Groups{1264,1289}
1979/01/08
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Service Kit Is Available For Woodward UG8 Governor{1289}
1979/08/27

Caterpillar Parts SIS Catalog D348 :

WOODWARD GOVERNOR GROUP
7L-8708 WOODWARD GOVERNOR GROUP
GOVERNOR SERVICE GROUP
4N-4777 GOVERNOR SERVICE GROUP
GOVERNOR SERVICE GROUP
4N-4777 GOVERNOR SERVICE GROUP
CONVERSION GP-GOVERNOR
4N-6685 CONVERSION GP-GOVERNOR
CONTROL GP-GOVERNOR
8L-4445 CONTROL GP-GOVERNOR
AIR ACTUATED GOVERNOR CONTROL GROUP
3N-2653 AIR ACTUATED GOVERNOR CONTROL GROUP
CONTROL GP-GOVERNOR
4N-5358 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-5326 CONTROL GP-GOVERNOR
WOODWARD GOVERNOR GROUP
7L-8708 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
2N-0503 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
2N-0503 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
2N-0503 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
2N-0503 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
3N-2174 WOODWARD GOVERNOR GROUP
GOVERNOR GP-WOODWARD
8L-8919 GOVERNOR GP-WOODWARD
WOODWARD GOVERNOR DRIVE GROUP
4N-5190 WOODWARD GOVERNOR DRIVE GROUP

Truck sale:

1972 CAT D348
USD $13,500 
1972 CAT D348

Hawthorne Cat
San Marcos, California
 
 
CAT D348

EURO AUCTIONS
United Kingdom
 
 
CAT D348

Yoder & Frey Auctioneers
Ashland, Ohio
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.