AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5S4034 FINAL DRIVE, WHEEL AND BRAKE GROUP--29.50 x 29 Tubeless Tires--4 Required Serial No. 36H1134-Up. 3K61 Wheel Brake parts are shown on Page 95. Refer also to Pages 164 through 165C and 197 for special parts 824B


POWER TRAIN
AXLE GP
BRAKING SYSTEM
BRAKE GP
POWER TRAIN
AXLE GP
FRAME AND BODY
FRAME GP
STEERING SYSTEM
CYLINDER GP

WHEEL DOZER 824B WHEEL DOZER 36H
 824B TRACTOR 36H00581-01138 (MACHINE) UEG0026S 824B 36H   (1965)

POWER TRAIN

AXLE GP
FINAL DRIVE WHEEL AND BRAKE
5S-4034 FINAL DRIVE WHEEL AND BRAKE
FINAL DRIVE WHEEL AND BRAKE
5S-4034 FINAL DRIVE WHEEL AND BRAKE
FINAL DRIVE, WHEEL AND BRAKE GROUP
5S-4034 FINAL DRIVE, WHEEL AND BRAKE GROUP
AXLE SHAFT GROUP
8K-0073 AXLE SHAFT GROUP
WHEEL AND BRAKE GROUP
4S-6206 WHEEL AND BRAKE GROUP
4S-6206 WHEEL AND BRAKE GROUP
 

#UEG0026S0240
 

5S-4034: FINAL DRIVE, WHEEL AND BRAKE GROUP

5S4034 FINAL DRIVE, WHEEL AND BRAKE GROUP--29.50 x 29 Tubeless Tires--4
Required
Serial No. 36H1134-Up. 3K61 Wheel Brake parts are shown on Page 95. Refer also
to Pages 164 through 165C and 197 for special parts
c138795 UEG0026S
5S4034 FINAL DRIVE, WHEEL AND BRAKE GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9194 [2] FLANGE  
2. 2B-7409 [1] PLUG  
3. 2D-6513 [1] CUP  
  4D-7995 [1] CONE  
4. 5F-2465 [1] CUP  
  5F-2466 [1] CONE  
5. 4D-1570 [1] GEAR (110 Teeth)  
6. 4D-3151 [6] BEARING  
7. 4D-1569 [3] GEAR (44 Teeth)  
8. 3D-8418 [3] SPACER  
9. 2D-2444 [1] SEAL  
10. 3D-5851 [1] BAND  
11. 3D-5852 [1] RING  
12. 3D-8835 [1] DRIVER  
13. 3D-8422 [1] SEAL  
14. 4D-3188 [6] SPACER  
15. 3D-9060 [6] SPACER  
16. 3D-8416 [3] PIN  
17. 2F-6067 [3] RING  
18. 7K-3734 [10] BOLT  
  4S-8746 LOCKWIRE 4 feet  
19. 2S-0635 [4] BOLT  
  4S-8743 LOCKWIRE 3 feet  
20. 7D-4864 [1] PAD  
21. 7D-5295 [1] COVER  
22. 7K-3736 [1] RING  
  7K-3735 [1] SHIM PACK  
23. 2A-3852 [1] PLUG  
  1S-3889 [1] WASHER  
  5F-1678 [1] SEAL  
24. 4D-1577 [1] SEAL  
25. 4D-5780 [1] CARRIER ASSEM.  
26. 2D-8153 [6] STUD  
  1D-4719 [6] NUT  
  3B-4508 [6] LOCKWASHER  
27. 1B-4331 [22] NUT  
  3B-4512 [22] LOCKWASHER  
28. 5F-0304 [1] PLUG  
  1S-3888 [1] WASHER  
  3H-3385 [1] SEAL  
29. 6F-4855 [1] SEAL  
30. 6H-1717 [8] BOLT  
  4F-7356 [4] LOCK  
31. 4D-3173 [4] RETAINER  
32. 5D-5452 [1] HUB (110 Teeth)  
33. 3D-2239 [1] VALVE ASSEM.  
  2D-2510 [1] VALVE  
  6F-3930 [1] CORE  
34. 6F-3931 [1] CAP  
35. 3S-9040 [1] WHEEL ASSEM.  
  4D-6579 [22] STUD  
36. 3D-0490 [27] STUD  
37. 4M-0661 [1] SEAL  
38. 6D-2347 [1] RETAINER ASSEM.  
  0S-0130 [3] PIN  
39. 5M-1177 R [1] SEAL GROUP  
  4M-0660 [2] RING  
40. 5D-5419 [1] SPACER  
41. 7K-4055 [1] HOUSING ASSEM.  
42. 9M-3948 [18] STUD  
  1B-4333 [18] NUT  
  3B-4516 [18] LOCKWASHER  
43. 7M-5130 [1] PIN  
44. 1H-8278 [1] SEAL  
45. 1M-9015 [1] SEAL  
46. 5D-5444 [1] RETAINER ASSEM.  
  5D-5443 [3] PIN  
47. Y [1] BRAKE  
    (Separate Illustration)
48. 4K-1435 [1] PLUG  
  4K-1388 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0026S0241
 

1V-9229: WHEEL BRAKE GROUP

1V9229 WHEEL BRAKE GROUP
Part of 4S6206, 4S6207, 4S6205, 4S6208, 9S1625, 9S1624 and 9K4826 Wheel and
Brake Groups shown on Pages 167D, 169D, 171D, 173B-2, 173D, 173H and
173R-4. AN ATTACHMENT
c152040 UEG0026S
1V9229 WHEEL BRAKE GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-5376 [1] DRUM ASSEM.  
  8S-4501 [12] LINING AND SHOE ASSEM.  
  [12] SPRING  
    (Parts of 1V9232 Assem.)
  1V-9232 [1] BRAKE ASSEM.  
  8S-4496 [2] FRAME AND TORQUE BAR ASSEM.  
  4D-2297 [4] SEAL  
    (Parts of 1V9232 Assem.)
  4D-5536 [1] GUARD  
  1V-6586 [1] TUBE ASSEM.  
    (Part of 1V9232 Assem.)
  0S-1625 [36] BOLT  
  4D-3704 [36] WASHER  
  1F-7958 [27] NUT  
  3B-4508 [27] LOCKWASHER  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  8S-4502 [1] KIT (Retracting Spring)  
    (Includes 12 Springs)
  8S-4500 [1] KIT (Brake Lining)  
    (Includes Springs and Lining and Shoe Assemblies)
 

#UEG0026S0242
 

3K-0061: WHEEL BRAKE GROUP

3K61 WHEEL BRAKE GROUP--Replaced by 1V9229
Part of Fianl Drive, Wheel and Brake, 4S6206, 4S6207, 4S6205, 4S6208, 9S1625,
9S1624, 8S9619, 8S9620, 9K4826, 9K4830, 8S9632 and 8S9633 Wheel and Brake Groups
shown on Pages 94 through 94C, 167, 167B, 167D, 169, 169B, 169D, 171, 171B, 171D,
173, 173B, 173B-2, 173C-1, 173D, 173F, 173H, 173K, 173M, 173P, 173R, 173R-4,
173R-6, 173T, 173V, 173X and 173Z. Note: 1V9295 Brake Expander Service Group
consisting of: 1--Tube and Shield Assembly (1V6586 N/S) and 1--Form GMG00065,
is available for replacement of each 8S3094 Tube Assembly
c106724 UEG0026S
3K0061 WHEEL BRAKE GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-5376 [1] DRUM ASSEM.  
  8S-4501 [12] LINING AND SHOE ASSEM.  
  [12] SPRING  
    (Parts of 8S3089 Brake Assem.)
  8S-3089 [1] BRAKE ASSEM.  
  8S-4496 [2] FRAME AND TORQUE BAR ASSEM.  
  4D-2297 [4] SEAL  
    (Parts of 8S3089 Brake Assem.)
  4D-5536 [1] GUARD  
  8S-3094 [1] TUBE ASSEM.  
    (Part of 8S3089 Brake Assem.)
  0S-1625 [36] BOLT  
  4D-3704 [36] WASHER  
  1F-7958 [27] NUT  
  3B-4508 [27] LOCKWASHER  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  8S-4502 [1] KIT (Retracting Spring)  
    (Includes 12 Springs)
  8S-4500 [1] KIT (Brake Lining)  
    (Includes Springs and Lining and Shoe Assemblies)
 

#UEG0026S0243
 

8K-0073: AXLE SHAFT GROUP

8K73 AXLE SHAFT GROUP
Serial No. 36H1134-Up
c138131 UEG0026S
8K0073 AXLE SHAFT GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-0041 [1] SHAFT  
2. 7S-1577 [1] SPACER  
3. 7D-9354 [1] GEAR (19 Teeth)  
4. 4D-0141 [1] RING  
 

#UEG0026S0244
 

4K-1003: FRONT FRAME

FRONT FRAME (4K1003 N/S)
c203596 UEG0026S
4K1003 FRONT FRAME Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5S-4081 [1] FRAME ASSEM.  
  6J-1153 [1] BRACKET ASSEM.  
    (PART OF FRAME ASSEM. 5S4081)
  6J-1152 [2] BEARING  
    (PART OF BRACKET ASSEM. 6J1153)
  2S-1640 [2] BRACKET  
    (PART OF FRAME ASSEM 5S4081)
  3K-6557 [1] BRACKET  
    (PART OF FRAME ASSEM. 5S4081)
  7S-6623 [1] BEARING  
    (PART OF FRAME ASSEM 5S4081)
  3K-6454 [2] SEAL  
  9M-3616 [2] BRACKET  
    (PART OF FRAME ASSEM 5S4081)
  3B-8489 [2] FITTING  
  2J-5649 [2] PIN  
  9M-2421 C [2] WASHER  
  0L-1178 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  C   INDICATES CHANGE
 

#UEG0026S0245
 

8S-1002: REAR FRAME

REAR FRAME (8S1002 N/S)
Serial No. 36H581 to 36H1043 and 36H1045 to 36H1051 inclusive
c106643 UEG0026S
8S1002 REAR FRAME Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3K-6370 [1] PIN  
  3K-6399 [1] SPACER  
  3K-6455 [1] SEAL  
  3K-6358 [1] CAP  
  3K-6401 [1] SHIM  
  9H-6260 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3K-6396 [1] BEARING ASSEM.  
  3K-6455 [1] SEAL  
  3K-6384 [1] CAP  
  3K-6397 [1] SPACER  
  1A-1460 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  3K-6412 [1] SHIM  
  3K-6446 [1] PLATE  
  0L-1178 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  1K-7588 [1] BOSS  
    (PART OF FRAME ASSEM. 8S1909)
  4S-8033 [2] PIN  
  3B-4639 [2] COTTER PIN  
  1J-1798 [2] YOKE  
  1A-5822 [3] BOLT  
  2M-0849 [3] WASHER  
  8B-2133 [2] BOSS  
  7F-5227 [2] BOLT  
  5H-1504 [2] WASHER  
  3S-0335 [1] ROD  
  4L-6730 [2] NUT  
  1D-4608 [7] BOLT  
  7M-2360 [7] WASHER  
  1B-4264 [1] SPACER  
  4S-8032 [1] BRACKET  
    (PART OF FRAME ASSEM 8S1909)
  3K-9919 [1] PIN  
  3B-8485 [1] FITTING  
  3J-1310 [2] SPACER  
  2S-4393 [1] BRACKET ASSEM.  
  2J-3349 [4] BLOCK  
    (PART OF FRAME ASSEM. 8S1909)
  3B-8489 [1] FITTING  
  8S-1909 [1] FRAME ASSEM.  
  9M-5846 [1] BLOCK  
    (PART OF FRAME ASSEM 8S1909)
  5M-8291 [12] LUG  
  1J-7540 [2] BOSS  
    (PARTS OF FRAME ASSEM. 8S1909)
  7K-1972 [2] EYE  
    (PART OF 8S1909 ASSEM.)
  0L-1178 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  9M-2421 [2] WASHER  
  2J-5649 [2] PIN  
  3B-8489 [2] FITTING  
  1A-1460 [2] BOLT  
  1D-4719 [2] NUT  
  1D-4624 [4] BOLT  
  1B-4331 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  1S-2340 [2] CLAMP  
  1S-2594 [2] SHIM (036" THICK)  
  1S-2595 [2] SHIM (060" THICK)  
  1S-2596 [4] SHIM (014" THICK)  
 

#UEG0026S0246
 

8S-1002: REAR FRAME GROUP

8S1002 REAR FRAME GROUP
Serial No. 36H1044 and 36H1052-Up
c134192 UEG0026S
8S1002 REAR FRAME GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3K-6370 [1] PIN  
  3K-6399 [1] SPACER  
  3K-6455 [1] SEAL  
  3K-6358 [1] CAP  
  3K-6401 [1] SHIM  
  9H-8260 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3K-6396 [1] BEARING ASSEM.  
  3K-6455 [1] SEAL  
  3K-6384 [1] CAP  
  3K-6397 [1] SPACER  
  1A-1460 [8] BOLT  
  3B-4508 [8] LOCKWASHER  
  3K-6412 [1] SHIM  
  3K-6446 [1] PLATE  
  0L-1178 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  1K-7588 [1] PIN  
    (PART OF FRAME ASSEM. 8K8108)
  4S-8033 [2] PIN  
  3B-4639 [2] COTTER PIN  
  1J-1798 [2] YOKE  
  1A-5822 [3] BOLT  
  2M-0849 [3] WASHER  
  8B-2133 [2] BOSS  
  7F-5227 [2] BOLT  
  5H-1504 [2] WASHER  
  3S-0335 [1] ROD  
  4L-6730 [2] NUT  
  1D-4608 [7] BOLT  
  7M-2360 [7] WASHER  
  1B-4264 [1] SPACER  
  4S-8032 [1] BRACKET  
    (PART OF FRAME ASSEM. 8K8108)
  3K-9919 [1] PIN  
  3B-8485 [1] FITTING  
  3J-1310 [2] SPACER  
  2S-4393 [1] BRACKET ASSEM.  
  2J-3349 [4] BLOCK  
    (PART OF FRAME ASSEM. 8K8108)
  3B-8489 [1] FITTING  
  8K-8108 [1] FRAME ASSEM.  
  5B-1983 [5] BOSS  
    (PART OF 8K8108 ASSEM.)
  9M-5846 [1] BLOCK  
  [1] BAR  
    (PARTS OF 8K8108 ASSEM.)
  5M-8291 [12] LUG  
  1J-7540 [2] BOSS  
    (PARTS OF FRAME ASSEM. 8K8108)
  7K-1972 [2] EYE  
    (PART OF 8K8108 ASSEM.)
  0L-1178 [2] BOLT  
  3B-4512 [2] LOCKWASHER  
  9M-2421 [2] WASHER  
  2J-5649 [2] PIN  
  3B-8489 [2] FITTING  
  1A-1460 [2] BOLT  
  1D-4719 [2] NUT  
  1D-4624 [4] BOLT  
  1B-4331 [4] NUT  
  3B-4512 [4] LOCKWASHER  
  1S-2340 [2] CLAMP  
  1S-2594 [2] SHIM (.036" THICK)  
  1S-2595 [2] SHIM (.060" THICK)  
  1S-2596 [4] SHIM (.014" THICK)  
 

#UEG0026S0247
 

6J-7590: STEERING CYLINDER GROUP

6J7590 STEERING CYLINDER GROUP--5" Bore x 28.80" Stroke--2 Required
Serial No. 36H581 to 36H959 inclusive
c103807 UEG0026S
6J7590 STEERING CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3J-6654 [1] ROD ASSEM.  
  4J-3420 [1] RING  
  4J-3348 [1] PISTON  
  2K-4512 [1] BEARING  
    (PART OF CYLINDER ASSEM. 6J7868)
  2J-3950 [1] NUT  
  6J-7868 [1] CYLINDER ASSEM.  
  5J-5020 [1] SEAL ASSEM.  
  5F-3144 [1] SEAL  
  2K-4096 [1] RING  
  2K-4434 [1] PACKING  
  4J-3515 [1] SEAL  
  2K-4512 [1] BEARING  
    (PART OF ROD ASSEM. 3J6654)
  0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2K-4418 [1] GLAND  
  2K-4437 [2] SHIM. (.032" THICK)  
  5J-0390 [3] SHIM (010" THICK)  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  6J-7869 [1] HEAD  
 

#UEG0026S0248
 

6J-7590: STEERING CYLINDER GROUP

6J7590 STEERING CYLINDER GROUP--5" Bore x 28.08" Stroke--2 Required
Serial No. 36H960 to 36H1014 inclusive
c110150 UEG0026S
6J7590 STEERING CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3J-6654 [1] ROD ASSEM.  
  4J-3420 [1] RING  
  4J-3348 [1] PISTON  
  2K-4512 [1] BEARING  
    (PART OF CYLINDER ASSEM 6J7868)
  2J-3950 [1] NUT  
  6J-7868 [1] CYLINDER ASSEM.  
  5J-5020 [1] SEAL ASSEM.  
  5F-3144 [1] SEAL  
  2K-4096 [1] RING  
  5J-3616 C [1] SEAL  
  5J-8225 C [1] SEAL  
  4J-3515 [1] SEAL  
  2K-4512 [1] BEARING  
    (PART OF ROD ASSEM. 3J6654)
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  7J-8271 [1] HEAD  
  C   INDICATES CHANGE FROM PREVIOUS
 

#UEG0026S0249
 

7K-9718: CONTROL GP-BUCKET

7K9718 STEERING CYLINDER GROUP (7K9401 N/S)--(Changes 1 & 2)--5" Bore x 28.80" Stroke--2 Required
Serial No. 36H1015-Up
c203604 UEG0026S
7K9718 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 824B WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7J-9715 [1] ROD ASSEM.  
  4J-3420 [1] RING  
  4J-3348 [1] PISTON  
  5P-0094 H [2] SEAL  
  7J-9708 [1] BEARING  
    (PART OF 7J9717 ASSEM.)
  2J-3950 [1] NUT  
  7J-9717 [1] CYLINDER ASSEM.  
  5J-5020 [1] SEAL ASSEM.  
  5F-3144 [1] SEAL  
  2K-4096 [1] RING  
  5J-3616 [1] SEAL  
  5J-8225 [1] SEAL  
  4J-3515 [1] SEAL  
  7J-9708 [1] BEARING  
    (PART OF 7J9715 ASSEM.)
  5P-0094 H [2] SEAL  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  9J-2043 [1] HEAD  
  H   NOT PART OF 7J9718 CYLINDER GR
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Final Drive, Wheels, Brakes And Axles<BR> (824, 825, 834, 835)
824 & 834 TRACTORS, 825, 826 & 835 COMPACTORS POWER TRAIN
Final Drive, Wheels, Brakes And Axles<BR> (826)
824 & 834 TRACTORS, 825, 826 & 835 COMPACTORS POWER TRAIN
Trunnion And Axle
824 & 834 TRACTORS, 825, 826 & 835 COMPACTORS POWER TRAIN
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for Wheel Dozer and Integrated Toolcarrier Axle Housing {0679, 3260}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Thermal Spray Procedures for IT And Wheel Dozer Spindle {0679, 4205}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Axles
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Planetary Carrier Assemblies
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Final Drive Ring Gears and Hubs
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
824-825 Final Drive Ring Gears and Hubs
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
834-835 Final Drive Ring Gears And Hub
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Wheel Bearings And Duo-Cone Seals
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Brake Drums
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Spindle Housings
824 & 834 WHEEL TRACTORS 825, 826 & 835 COMPACTORS POWER TRA
Service Magazine
New Recommendations for Selecting the Oil Viscosity for the Differentials and Final Drives {3258, 4011, 4051, 7581}
2001/04/02
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29

Caterpillar Parts SIS Catalog 824B :

FINAL DRIVE WHEEL AND BRAKE
5S-4034 FINAL DRIVE WHEEL AND BRAKE
FINAL DRIVE WHEEL AND BRAKE
5S-4034 FINAL DRIVE WHEEL AND BRAKE
FINAL DRIVE WHEEL AND BRAKE
5S-4034 FINAL DRIVE WHEEL AND BRAKE
1S-1938 REAR AXLE HOUSING AND TRUNNION
REAR AXLE HOUSING AND TRUNNION
1S-1938 REAR AXLE HOUSING AND TRUNNION
1S-1983 REAR AXLE HOUSING AND TRUNNION
REAR AXLE HOUSING AND TRUNNION
1S-1983 REAR AXLE HOUSING AND TRUNNION
FRONT AXLE HOUSING GROUP
3K-9596 FRONT AXLE HOUSING GROUP
WHEEL BRAKE GROUP
1V-9229 WHEEL BRAKE GROUP
WHEEL BRAKE GROUP
3K-0061 WHEEL BRAKE GROUP
AXLE SHAFT GROUP
8K-0073 AXLE SHAFT GROUP
FRONT FRAME
4K-1003 FRONT FRAME
REAR FRAME
8S-1002 REAR FRAME
REAR FRAME GROUP
8S-1002 REAR FRAME GROUP
STEERING CYLINDER GROUP
6J-7590 STEERING CYLINDER GROUP
STEERING CYLINDER GROUP
6J-7590 STEERING CYLINDER GROUP

Truck sale:

 
 
CAT 824B

BLOUNT PARTS & EQUIPMENT
 
 
CAT 824B

BLOUNT PARTS & EQUIPMENT
1969 CAT 824B
USD $19,000 
1969 CAT 824B

Compass Equipment
Atlanta, Georgia
CAT 824B
 
CAT 824B

TRB Equipment Company
Hacienda Heights, California
 
 
CAT 824B

WESTERN CONSTRUCTION AUCTIONS
Perris, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.