AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (5S5130 N/S)--Side View Part 1 of 2 Serial No. 72G1098 to 72G1100 and 72G1102-Up. 2P8776 Cylinder Block parts are shown on Page 24B. See Page 26 for Gasket Kit 14E


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
BASIC ENGINE
PISTON & ROD GP
FLYWHEEL GP

MOTOR GRADER 14E MOTOR GRADER 72G
 NO. 14E MOTOR GRADER / POWER SHIFT / 72G00001-01340 (MACHINE) UEG0029S 14E 72G   (1969)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
5S-6778 CYLINDER BLOCK ASSEMBLY
 

#UEG0029S0040
 

5S-5130: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S5130 N/S)--Side View Part 1 of 2
Serial No. 72G1098 to 72G1100 and 72G1102-Up. 2P8776 Cylinder Block
parts are shown on Page 24B. See Page 26 for Gasket Kit
c139368 UEG0029S
5S5130 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-9135 [1] LOCK  
2. 1A-1460 [13] BOLT  
3. 5M-9132 [1] LOCK  
4. 5M-6213 [6] PLUG  
5. 9H-5921 [1] GASKET  
6. 5M-9136 [1] LOCK  
7. 5M-9134 [1] LOCK  
8. 5M-9131 [1] LOCK  
9. 2P-8889 C [6] LINER  
10. 5S-6670 C [18] SEAL  
11. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
12. 2P-8776 YC [1] BLOCK ASSEM.  
    (Separate Illustration)
13. 5B-8030 [1] SPACER  
14. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
15. 0S-1594 [8] BOLT  
16. 3B-4506 [62] LOCKWASHER  
17. 5S-7134 [1] GASKET  
18. 5S-7135 [1] GASKET  
19. 9S-1759 [1] TUBE  
20. 0S-1588 [20] BOLT  
21. 8S-8206 [1] PAN ASSEM.  
22. 9H-6067 [1] SEAL  
23. 8S-0501 [1] TUBE ASSEM.  
24. 8S-1965 [1] GASKET  
25. 1A-2029 [8] BOLT  
26. 0L-1351 [26] BOLT  
27. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
28. 8S-1961 [1] PLATE ASSEM.  
29. 4M-2969 [1] GASKET  
30. 0T-0102 [1] BOLT  
  0L-0364 [1] LOCK  
31. 7S-3573 [1] HOUSING (Flywheel)  
32. 2A-3798 [2] DOWEL  
33. 4B-3938 [1] PLUG  
34. 8M-3023 [6] ORIFICE  
35. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
36. 5M-6214 [1] PLUG  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0029S0041
 

5S-5130: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (5S5130 N/S)--End View Part 2 of 2
Serial No. 72G1098 to 72G1100 and 72G1102-Up
Refer also to Page 140 for special parts
c139369 UEG0029S
5S5130 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-1234 [1] BUSHING ASSEM.  
2. 0L-1143 [9] BOLT  
3. 3B-4506 C [17] LOCKWASHER  
4. 0S-1594 [8] BOLT  
5. 9S-3187 [1] LOCK  
6. 1B-4203 [6] NUT  
7. 9S-8991 [1] COVER ASSEM.  
8. 8S-6814 [2] DOWEL  
9. 3B-2460 [1] STUD  
10. 0T-0101 [4] STUD  
11. 9H-4891 [1] GASKET  
12. 2N-2753 [1] COVER  
13. 1C-2251 [2] BOLT  
14. 5S-8055 [1] GASKET  
15. 1A-2029 [3] BOLT  
16. 7S-1803 [1] CAP ASSEM.  
  7S-1801 [1] ANCHOR  
17. 8S-3995 [1] GAUGE ASSEM.  
18. 9S-1796 [1] TUBE ASSEM.  
19. 9S-3188 [1] LOCK  
20. 4M-4419 [1] LOCK  
21. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
22. 5S-3096 [1] SUPPORT ASSEM.  
23. 8S-1326 [1] FITTING  
24. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
25. 1P-2698 [1] PIPE  
26. 4B-4278 C [3] WASHER  
  C   INDICATES CHANGE
 

#UEG0029S0042
 

CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY
Part of Cylinder Block and Covers shown on Page 22
Note: For Field Replacement order 5S6778 Block plus 1--9S5603 Hardware Kit
c102826 UEG0029S
None CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-1312 [2] DOWEL  
2. 3S-8313 [2] PLUG  
3. 7M-4046 [4] BEARING  
4. 4B-5387 [2] PLUG  
5. 5B-7652 [2] DOWEL  
6. 5S-8462 [1] STUD  
7. 8B-6349 [2] DOWEL  
8. 4B-9782 [1] BALL  
9. 9M-5477 [1] BEARING  
10. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER  
11. 8S-4676 [7] BEARING CAP GROUP  
  8S-4674 [2] SHIM (Long)  
  8S-4673 [6] SHIM (Short)  
    (Parts of 8S4676 Bearing Cap Group)
12. 8S-0835 [1] DOWEL  
13. 1H-0974 [1] DOWEL  
14. 5M-6213 [1] PLUG  
 

#UEG0029S0043
 

5S-6778: CYLINDER BLOCK ASSEMBLY

5S6778 CYLINDER BLOCK ASSEMBLY
Serial No. 72G140 to 72G148, 72G150 to 72G1097 and 72G1101 inclusive
Part of Cylinder Block and Covers shown on Pages 22B and 22D
Note: For Field Replacement order 5S6778 Block plus 1--9S5603 Hardware Kit
c112398 UEG0029S
5S6778 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [ 4] BEARING  
2. 5M-6213 [ 1] PLUG  
3. 8B-1312 [ 2] DOWEL  
4. 4B-5387 [ 2] PLUG  
5. 1H-0974 [ 1] DOWEL  
6. 5B-7652 [ 2] DOWEL  
7. 8S-0835 [ 1] DOWEL  
8. 3S-8313 [ 2] PLUG  
9. 8B-6349 [ 2] DOWEL  
10. 5S-8462 [ 1] STUD  
11. 9M-5477 [ 1] BEARING  
12. 4B-9782 [ 1] BALL  
13. 7S-3224 [ 14] BOLT  
  2S-5658 [ 14] WASHER  
14. 8S-4676 [ 7] BEARING CAP GROUP  
  8S-4674 [ 2] SHIM (long)  
  8S-4673 [ 6] SHIM (short)  
    -OR-
  1P-2717 [ 7] BEARING CAP  
 

#UEG0029S0044
 

2P-8776: CYLINDER BLOCK AS

2P8776 CYLINDER BLOCK ASSEMBLY
Serial No. 72G1098 to 72G1100 and 72G1102-Up
Part of Cylinder Block and Covers shown on Page 22F
Note: For Field Replacement order 2P8776 Block plus 1--2P8782 Hardware Kit
c114554 UEG0029S
2P8776 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [4] BEARING  
2. 5M-6213 [1] PLUG  
3. 8B-1312 [2] DOWEL  
4. 4B-5387 [2] PLUG  
5. 1H-0974 [1] DOWEL  
6. 5B-7652 [2] DOWEL  
7. 8S-0835 [1] DOWEL  
8. 3S-8313 [2] PLUG  
9. 8B-6349 [2] DOWEL  
10. 5S-8462 [1] STUD  
11. 9M-5477 [1] BEARING  
12. 4B-9782 [1] BALL  
13. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER  
14. 1P-2717 [7] BEARING CAP  
 

#UEG0029S0045
 

7S-5128: CRANKSHAFT

CRANKSHAFT (7S5128 N/S)
c113103 UEG0029S
7S5128 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0716 C [2] PLATE  
2. 5S-5871 [1] CRANKSHAFT ASSEM.  
3. 9F-2247 [6] PLUG  
4. 5H-2671 [1] KEY  
5. 4M-9933 [1] GEAR (40 Teeth)  
6. 3S-9730 [7] BEARING  
7. 5S-9021 [1] SEAL  
8. 0S-1595 [6] BOLT  
9. 3B-4508 [6] LOCKWASHER  
10. 8S-1503 [1] DAMPER ASSEM.  
11. 5S-8168 [1] PULLEY  
12. 6B-5310 [1] BOLT  
13. 5S-9948 [1] WASHER  
14. 5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (With Sleeve for Worn Flange)
 

#UEG0029S0046
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UEG0029S0046 UEG0029S
None CRANKSHAFT BEARING REPLACEMENT GROUPS Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0029S0047
 

GASKET KITS

GASKET KITS
UEG0029S0047 UEG0029S
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9S-3366 DIESEL ENGINE BASIC  
  9S-3367 DIESEL ENGINE SUPPLEMENTARY  
  9S-3368 VALVE GRINDING  
  8S-7057 WATER PUMP  
  9S-3370 TRANSFER GEAR, BEVEL GEAR AND FLYWHEEL CLUTCH  
  9S-3371 TRANSMISSION  
 

#UEG0029S0048
 

5S-6429: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (5S6429 N/S)--6 Required
Serial No. 72G1 to 72G416 inclusive
Note: 8S4635 Piston & Liner Group, consisting of: 1--Piston Assembly,
1--Liner & 2--Seal, is available
c112030 UEG0029S
5S6429 CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-9017 [1] PISTON ASSEM.  
2. 7S-8378 [1] RING (Top)  
3. 5S-6750 [1] RING (Intermediate)  
4. 9S-7788 [1] RING (Oil)  
    (Parts of 5S9017 Piston Assem.)
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010"Undersize)  
  2S-0503 [1] BEARING (.020"Undersize)  
  7M-7826 [1] BEARING (.030"Undersize)  
6. 5S-6360 [1] ROD ASSEM.  
  7S-9347 [1] BEARING  
7. 1P-9956 [2] BOLT  
8. 5S-6348 [2] NUT  
    (Parts of 5S6360 Rod Assem.)
9. 9H-4016 [1] PIN  
10. 9H-4015 [2] RETAINER  
  7S-9404 [1] RING GROUP  
    (Consists of complete set of Rings FOR ONE PISTON)
 

#UEG0029S0049
 

7S-3207: FLYWHEEL

FLYWHEEL (7S3207 N/S)--Type 1
c103843 UEG0029S
7S3207 FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 14E MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7S-3579 [1] FLYWHEEL ASSEM.  
  0S-1601 [9] BOLT  
  1M-7341 [1] LOCK  
  1M-2910 [2] RING  
  2S-7037 [1] GEAR (156 TEETH)  
    (PART OF FLYWHEEL ASSEM. 7S3579)
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
3306 VEHICULAR ENGINE
Cylinder Liner
3306 VEHICULAR ENGINE
Cylinder Liner Projection
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog 14E :

5S-5130 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-5130 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
5S-6687 CYLINDER HEAD AND VALVE MECHANISM
5S-5130 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
5S-6778 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
CRANKSHAFT
7S-5128 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
GASKET KITS
CONNECTING ROD AND PISTON
5S-6429 CONNECTING ROD AND PISTON

Truck sale:

Caterpillar 14E
 
Caterpillar 14E
- motor graders
NMC
Caterpillar 314E STL, Crawler Excavators, Construction
104,500 
Caterpillar 314E STL, Crawler Excavators, Construction
- Crawler Excavators
HOLT OF CALIFORNIA
Caterpillar 314E, Crawler Excavators, Construction
80,003 
Caterpillar 314E, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
128,589 
Caterpillar 314E, Crawler Excavators, Construction


 
165,000 
Caterpillar 314EL, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.