AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9K4046 BUCKET GROUP--Rock Loading--10 Cubic Yard--167" Wide 9K4047 Bucket parts are shown on Page 202D-1 992


WORK TOOLS
BUCKET GP
GROUND ENGAGING TOOLS (G.E.T.)

WHEEL LOADER 992 WHEEL LOADER 25K
 992 WHEEL LOADER 25K00001-00698 (MACHINE) UEG0033S 992 25K   (1968)

WORK TOOLS

BUCKET GP
BUCKET GROUP
8K-8478 BUCKET GROUP
BUCKET GROUP
8K-8478 BUCKET GROUP
BUCKET GROUP
9K-4046 BUCKET GROUP
BUCKET GROUP
7K-7064 BUCKET GROUP
BUCKET ASSEMBLY
8K-7190 BUCKET ASSEMBLY
BUCKET ASSEMBLY
8K-8501 BUCKET ASSEMBLY
 

#UEG0033S0620
 

9K-4046: BUCKET GROUP

9K4046 BUCKET GROUP--Rock Loading--10 Cubic Yard--167" Wide
9K4047 Bucket parts are shown on Page 202D-1
c140728 UEG0033S
9K4046 BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9K-4047 Y [1] BUCKET ASSEM.  
    (Separate Illustration)
2. 8J-4143 [2] BIT  
3. 8J-3960 [9] COVER  
4. 7J-9558 [18] PIN  
5. 7J-9559 [20] SPRING  
6. 7J-9552 [9] TIP  
7. 8J-4067 [8] EDGE  
8. [2] PIN  
9. 1J-3527 [16] BOLT  
  2J-3507 [16] NUT  
  3K-5234 [16] WASHER  
10. 5J-6881 [2] EDGE  
  6J-5945 [3] EDGE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0033S0621
 

7K-7064: BUCKET GROUP

7K7064 BUCKET GROUP--Rock Loading with Teeth--10 Cubic Yard--156.50" Wide
PROVIDES WELDED ON ADAPTERS WITHOUT BOTTOM STRAPS. Only separate parts serviced
c139094 UEG0033S
7K7064 BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3656 [2] BAR  
2. 6K-8687 [1] PLATE ASSEM. (R.H.)  
  6S-1187 [1] PLATE  
3. 6K-8689 [1] PLATE  
4. 6S-0937 [1] PLATE  
5. 6K-8688 [1] PLATE ASSEM. (L.H.)  
  6S-1187 [1] PLATE  
6. 6K-8689 [1] PLATE  
7. 6S-0937 [1] PLATE  
8. 7K-7204 [1] EDGE ASSEM.  
  7K-7189 [1] CUTTING EDGE  
9. 6S-1183 [1] CORNER (R.H.)  
  6S-1184 [1] CORNER (L.H.)  
10. 7K-0039 [6] ADAPTER  
11. 6K-0004 H [6] PIN  
12. 6S-1151 [1] PLATE (R.H.)  
13. 6K-8730 [3] PLATE ASSEM.  
14. 6K-7086 [1] PLATE  
15. 6K-7117 [2] PLATE  
16. 6K-7107 [1] PLATE ASSEM. (R.H.-Outer)  
17. 6K-7109 [1] PLATE ASSEM. (R.H.-Inner)  
18. 6K-7110 [1] PLATE ASSEM. (L.H.-Inner)  
19. 6K-7108 [1] PLATE ASSEM. (L.H.-Outer)  
20. 6S-1152 [1] PLATE (L.H.)  
21. 7K-4603 H [6] TIP  
22. 6K-0003 H [6] PLUG  
  7K-7065 [1] BUCKET ASSEM.  
    (Only Separate Parts Serviced Consists of Parts Shown Minus Parts Marked H)
 

#UEG0033S0622
 

8K-7190: BUCKET ASSEMBLY

8K7190 BUCKET ASSEMBLY--10 Cubic Yard--171" Wide
c135749 UEG0033S
8K7190 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3656 [1] BAR  
2. 8K-7419 [1] PLATE (R.H.)  
  8K-7420 [1] PLATE (L.H.)  
3. 8K-6489 [1] CORNER (R.H.)  
  8K-6490 [1] CORNER (L.H.)  
4. 8K-6604 [1] CUTTING EDGE  
5. 8K-7421 [2] PLATE  
6. 8K-7333 [1] PLATE ASSEM. (R.H.-Outer)  
7. 8K-7335 [1] PLATE ASSEM. (R.H.-Inner)  
8. 8K-7336 [1] PLATE ASSEM. (L.H.-Inner)  
9. 8K-7334 [1] PLATE ASSEM. (L.H.-Outer)  
10. 6K-7086 [2] PLATE  
 

#UEG0033S0623
 

8K-8501: BUCKET ASSEMBLY

8K8501 BUCKET ASSEMBLY--Rock Loading
Part of 8K8478 Bucket Group shown on Pages 202B and 202B-1
c157389 UEG0033S
8K8501 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3656 C [2] BAR  
2. 8K-7419 [2] PLATE  
3. 8K-6489 [1] CORNER (R.H.)  
  8K-6490 [1] CORNER (L.H.)  
4. 8K-8494 [1] CUTTING EDGE ASSEM.  
  8K-6604 [1] CUTTING EDGE  
5. 7J-9555 [3] ADAPTER (R.H.)  
  7J-9554 [2] ADAPTER (Center)  
  7J-9556 [3] ADAPTER (L.H.)  
6. 8K-7421 [2] PLATE  
7. 8K-7333 [1] PLATE ASSEM. (R.H.-Outer)  
8. 8K-7335 [1] PLATE ASSEM. (R.H.-Inner)  
9. 8K-7336 [1] PLATE ASSEM. (L.H.-Inner)  
10. 8K-7334 [1] PLATE ASSEM. (L.H.-Outer)  
11. 6K-7086 [2] PLATE  
 

#UEG0033S0624
 

9K-4047: BUCKET ASSEMBLY

9K4047 BUCKET ASSEMBLY
Part of 9K4046 Bucket Group shown on Page 202B-1
c140735 UEG0033S
9K4047 BUCKET ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-3656 [1] BAR  
2. 8K-7419 [2] PLATE  
3. 8J-4889 [4] RETAINER  
4. 8J-5033 [1] SUPPORT ASSEM.  
  8J-4992 [1] SUPPORT  
5. 8J-3984 [2] ADAPTER (Outer)  
6. 8J-3961 [7] ADAPTER (Inner)  
7. 6K-7086 [2] PLATE  
8. 8K-7421 [2] PLATE  
9. 8K-7333 [1] PLATE ASSEM. (R.H.-Outer)  
10. 8K-7335 [1] PLATE ASSEM. (R.H.-Inner)  
11. 8K-7336 [1] PLATE ASSEM. (L.H.-Inner)  
12. [2] PLATE  
13. 8K-7334 [1] PLATE ASSEM. (L.H.-Outer)  
 

#UEG0033S0625
 

8J-5365: BIT AND CUTTING EDGE GROUP

8J5365 BIT AND CUTTING EDGE GROUP--Field Installation--Type 1
FOR USE WITH 6K8929, 6K7121, 7K8416 AND 7K8425 BUCKETS
c139483 UEG0033S
8J5365 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5034 [1] SUPPORT ASSEM.  
  8J-4975 [1] SUPPORT  
2. 8J-3961 [7] ADAPTER  
3. 8J-3984 [2] ADAPTER  
4. 2J-3507 [17] NUT  
5. 3K-5234 [17] WASHER  
6. 8J-3962 [7] CUTTING EDGE  
7. 5J-6881 [3] CUTTING EDGE (1.125" Thick)  
    -OR-
  8J-4973 H [3] SOLE (1.625" Thick)  
8. 8J-3960 [8] COVER  
9. 7J-9552 [8] TIP (13" long)  
    -OR-
  7J-9551 H [8] TIP (11" long)  
10. 4J-9058 [17] BOLT  
11. 6J-5945 [2] CUTTING EDGE (1.125" Thick)  
    -OR-
  8J-4974 H [2] SOLE (1.625" Thick)  
12. 7J-9558 [16] PIN  
13. 7J-9559 [18] SPRING  
14. 8J-3937 [2] PIN  
15. 8J-4889 [4] RETAINER  
16. 8J-4143 [2] END BIT  
  H   NOT PART OF 8J5365 BIT & CUTTI
 

#UEG0033S0626
 

8J-5365: BIT AND CUTTING EDGE GROUP

8J5365 BIT AND CUTTING EDGE GROUP--Field Installation--Type 2
FOR USE WITH 6K8929, 6K7121, 7K8416 AND 7K8425 BUCKETS SHOWN ON PAGES 201 AND 202A
c162760 UEG0033S
8J5365 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5034 [1] SUPPORT ASSEM.  
    (Includes)
  8J-4975 [1] SUPPORT  
2. 8J-3961 C [6] ADAPTER  
3. 3G-1345 C [2] ADAPTER  
4. 2J-3507 [17] NUT  
5. 3K-5234 [17] WASHER  
6. 8J-3962 [7] CUTTING EDGE  
7. 8J-9853 C [3] PLATE 2.86 cm(1.125 in.) thick  
    -OR-
  8J-4973 H [3] SOLE 4.128 cm(1.625 in.) long  
8. 8J-3960 [8] COVER  
9. 9J-4553 C [8] TIP 33.02 cm(13 in.) long  
    -OR-
  7J-9551 H [8] TIP 27.94 cm(11 in.) long  
10. 4J-9058 [17] BOLT  
11. 8J-9854 C [2] PLATE 2.86 cm(1.125 in.) long  
    -OR-
  8J-4974 H [2] SOLE 4.128 cm(1.625 in.) long  
12. 9J-4558 C [16] PIN  
13. 7J-9559 [18] SPRING  
14. 9J-8441 C [2] PIN  
15. 8J-4889 [4] RETAINER  
16. 8J-4143 [2] END BIT  
17. 9J-1550 C [2] PLATE  
  C   INDICATES CHANGE
  H   NOT PART OF 8J5365 BIT & CUTTI
 

#UEG0033S0627
 

8J-5364: BIT AND CUTTING EDGE GROUP

8J5364 BIT AND CUTTING EDGE GROUP--Field Installation--Type 1
FOR USE WITH 9K472, 8K7189, 8K8478 AND 8K7190 BUCKETS SHOWN ON PAGES 202, 202B,
202B-1 AND 202C
c163747 UEG0033S
8J5364 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5033 [1] SUPPORT ASSEM.  
    (Includes)
  8J-4992 [1] SUPPORT  
2. 8J-3961 [7] ADAPTER  
3. 8J-3984 [2] ADAPTER  
4. 2J-3507 [16] NUT  
5. 3K-5234 [16] WASHER  
6. 8J-4067 [8] CUTTING EDGE  
7. 8J-9853 C [2] CUTTING EDGE 3.51 cm(1.38 in.) thick  
    -OR-
  8J-4973 H [2] SOLE 4.13 cm(1.625 in.) thick  
8. 8J-3960 [9] COVER  
9. 9J-4553 C [9] TIP 32.99 cm(12.99 in.) long  
    -OR-
  7J-9551 H [9] TIP 27.94 cm(11 in.) long  
10. 4J-9058 [16] BOLT  
11. 8J-9854 C [3] CUTTING EDGE 3.51 cm(1.38 in.) thick  
    -OR-
  8J-4974 H [3] SOLE 4.13 cm(1.625 in.) thick  
12. 9J-4558 C [18] PIN  
13. 7J-9559 [20] SPRING  
14. 8J-3937 [2] PIN  
15. 8J-4889 [4] RETAINER  
16. 8J-4143 [2] END BIT  
  C   INDICATES CHANGE
  H   NOT PART OF 8J5364 BIT & CUTTI
 

#UEG0033S0628
 

8J-5364: BIT AND CUTTING EDGE GROUP

8J5364 BIT AND CUTTING EDGE GROUP--Field Installation--Type 2
FOR USE WITH 9K472, 8K7189, 8K8478 AND 8K7190 BUCKETS SHOWN ON PAGES 202, 202B, 202B-1 & 202C
c163748 UEG0033S
8J5364 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5033 [1] SUPPORT ASSEM.  
    (Includes)
  8J-4992 [1] SUPPORT  
2. 8J-3961 [7] ADAPTER  
3. 3G-1345 C [2] ADAPTER  
4. 2J-3507 [16] NUT  
5. 3K-5234 [16] WASHER  
6. 8J-4067 [8] CUTTING EDGE  
7. 8J-9853 C [2] CUTTING EDGE 3.51 cm(1.38 in.) thick  
    -OR-
  8J-4973 CH [2] SOLE 4.13 cm(1.625 in.) thick  
8. 8J-3960 [9] COVER  
9. 9J-4553 C [9] TIP 32.99 cm(12.99 in.) long  
    -OR-
  7J-9551 CH [9] TIP 27.94 cm(11 in.) long  
10. 4J-9058 [16] BOLT  
11. 8J-9854 C [3] CUTTING EDGE 3.51 cm(1.38 in.) thick  
    -OR-
  8J-4974 CH [3] SOLE 4.13 cm(1.625 in.) thick  
12. 9J-4558 C [18] PIN  
13. 7J-9559 [20] SPRING  
14. 9J-8441 C [2] PIN  
15. 8J-4889 [4] RETAINER  
16. 8J-4143 [2] END BIT  
17. 9J-1550 C [2] PLATE  
  C   INDICATES CHANGE
  H   NOT PART OF 8J5364 BIT & CUTTI
 

#UEG0033S0629
 

8J-5363: BIT AND CUTTING EDGE GROUP

8J5363 BIT AND CUTTING EDGE GROUP--Field Installation--Type 1
FOR USE WITH 9K472, 8K7189, 8K8478 AND 8K7190 BUCKETS SHOWN ON
PAGES 202, 202B, 202B-1 AND 202C
c157779 UEG0033S
8J5363 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 992 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-4143 [2] BIT  
2. 9J-8441 [2] PIN  
3. 3K-5234 [18] WASHER  
4. 2J-3507 [18] NUT  
5. 8J-4889 [4] RETAINER  
6. 8J-4069 [3] CUTTING EDGE (L.H.)  
7. 8J-4067 [2] CUTTING EDGE (center)  
8. 8J-3960 [9] COVER  
9. 9J-4553 [9] TIP (abrasion)  
    -OR-
  7J-9551 H [9] TIP (short)  
    -OR-
  7J-9552 H [9] TIP (long)  
10. 4J-9058 [18] BOLT  
11. 9J-1463 [5] PLATE 3.5 cm(1.38 in.) thick  
    -OR-
  8J-5090 H [5] CUTTING EDGE .41 cm(1.625 in.) thick  
12. 9J-1476 [2] PLATE 3.5 cm(1.38 in.) thick  
    -OR-
  8J-5091 [2] CUTTING EDGE .41 cm(1.625 in.) thick  
13. 8J-4068 H [3] CUTTING EDGE (R.H.)  
14. 7J-9559 [20] SPRING  
15. 9J-4458 [18] PIN  
16. 8J-4141 [1] SUPPORT ASSEM.  
    (Includes)
17. 8J-3984 [2] ADAPTER  
18. 8J-3961 [7] ADAPTER  
  H   NOT PART OF 8J5363 BIT AND CUT
 

Information:

Special Instruction
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation And Weld Procedure For Improved Cutting Edges On Rock Buckets{6102, 6801}
Installation And Weld Procedure For Improved Cutting Edges On Rock Buckets{6102, 6801}
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Replacing Base Edge Assemblies In Large Wheel Loader Buckets{0679, 6101, 6102, 6131, 6132, 6801, 6818}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
992 WHEEL LOADER VEHICLE SYSTEMS
Bucket
992B WHEEL LOADER VEHICLE SYSTEMS
Service Magazine
Use Larger Bucket Adapters And Tips{6800,6803,6805}
1985/03/11
Bucket Dump Shock Now Cushioned To Give Protection To The Lift Arms And Components{5051,5057,5122}
1977/10/10
Replacement Tip Or Boss Assemblies Are Available For The Ends Of Bucket Lift Arms{6119}
1978/01/09
What To Do If Bucket Falls When Engine Stops{5050,5059}
1978/09/18
New Cutting Edges On Rock Buckets Do Not Require Preheating{6102,6801}
1989/02/27
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Procedures are Available for Replacing Base Edge Assemblies, Repairing Adapter Weld, and Edge Assembly Cracks on Large Wheel Loader Buckets {6101, 6102, 6131, 6132, 6801, 6818}
2010/09/13
Improved K170 Corner Tip Adapter is Now Available {6131, 6800, 6803}
2011/03/18
Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}

Caterpillar Parts SIS Catalog 992 :

BUCKET GROUP
8K-8478 BUCKET GROUP
BUCKET GROUP
8K-8478 BUCKET GROUP
BUCKET ASSEMBLY
8K-7189 BUCKET ASSEMBLY
BUCKET GROUP
7K-8425 BUCKET GROUP
BUCKET ASSEMBLY
7K-8416 BUCKET ASSEMBLY
BUCKET GROUP
9K-0472 BUCKET GROUP
BUCKET ASSEMBLY
6K-7141 BUCKET ASSEMBLY
BUCKET GROUP
6K-8929 BUCKET GROUP
BUCKET GROUP
7K-7064 BUCKET GROUP
BUCKET ASSEMBLY
8K-7190 BUCKET ASSEMBLY
BUCKET ASSEMBLY
8K-8501 BUCKET ASSEMBLY
BUCKET ASSEMBLY
9K-4047 BUCKET ASSEMBLY
BIT AND CUTTING EDGE GROUP
8J-5365 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
8J-5365 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
8J-5364 BIT AND CUTTING EDGE GROUP
BIT AND CUTTING EDGE GROUP
8J-5364 BIT AND CUTTING EDGE GROUP

Truck sale:

 
USD $57,500 
2000 CAT 992

Zadoon Equipment
Wisconsin
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.