SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSBASIC ENGINE
FLYWHEEL GPPISTON & ROD GP
CAMSHAFT GP
OPERATOR STATION
PANEL GPFUEL SYSTEM
GOVERNOR GPSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS#UEG0040S0040
GASKET KITS
 GASKET KITS
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#UEG0040S0041
8L-5074: FLYWHEEL
  FLYWHEEL (8L5074 N/S)
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#UEG0040S0042
7L-0472: PISTON & ROD GP
  7L472 CONNECTING ROD AND PISTON GROUP--10.5:1 Ratio--6 Required
8L4446 CONNECTING ROD AND PISTON GROUP--8:1 Ratio--6 Required
Also part of 8L4447 and 7L311 Engine Arrangements listed on Page 6A
Only separate parts serviced
8L4446 CONNECTING ROD AND PISTON GROUP--8:1 Ratio--6 Required
Also part of 8L4447 and 7L311 Engine Arrangements listed on Page 6A
Only separate parts serviced
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 8L-4166 | [1] | PISTON GP (10.51 RATIO) | |
| 8L-4165 | [1] | PISTON GP (8.1 RATIO) | ||
| (EACH INCLUDES) | ||||
| 2. | 5S-7570 | [2] | RING-PISTON TOP | |
| 3. | 9S-2412 | [2] | RING (OIL) | |
| 4. | 9H-4015 | [2] | RETAINER-PIN | |
| 5. | 7M-7821 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 2S-0502 | [1] | BEARING-.254MM US | ||
| 2S-0503 | [1] | BEARING-.508MM US | ||
| 7M-7826 | [1] | BEARING-.762MM US | ||
| 6. | 5S-6360 | [1] | ROD AS-CONNECTION | |
| 7S-9347 | [1] | BEARING | ||
| 7. | 1P-9956 C | [2] | BOLT-CONNECTING ROD | |
| 8. | 5S-6348 | [2] | NUT-SPECIAL | |
| 9. | 7N-9804 C | [1] | PIN-PISTON | |
| 8L-6370 | [1] | RING GP-PISTON (INCL A COMPLETE SET OF | ||
| RINGS FOR ONE PISTON) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#UEG0040S0043
5S-6438: CAMSHAFT GROUP
  5S6438 CAMSHAFT GROUP
Also part of 7L311 Basic Engine Arrangement listed on Page 6A
Only separate parts serviced
Also part of 7L311 Basic Engine Arrangement listed on Page 6A
Only separate parts serviced
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | [4] | BOLT | ||
| 2. | [1] | GEAR (80 Teeth) | ||
| 3. | [1] | CAMSHAFT | ||
| 4. | [2] | BOLT | ||
| 5. | [1] | WASHER | ||
| 6. | [1] | LOCK | ||
| 7. | [1] | LOCK | ||
#UEG0040S0044
8L-3886: SERVICE METER GROUP
  8L3886 SERVICE METER GROUP
Also part of 7L311 Basic Engine Arrangement listed on Page 6A
Also part of 7L311 Basic Engine Arrangement listed on Page 6A
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 9M-3866 | [1] | GASKET | |
| 2. | 9M-3865 | [1] | WINDOW | |
| 3. | 3S-9557 | [4] | SCREW | |
| 4. | 8S-4678 | [1] | HOUSING ASSEM. | |
| 5. | 8H-5124 | [1] | PLATE | |
| 6. | 7B-3028 | [2] | SCREW | |
| 7. | 4H-1722 | [1] | SEAL | |
| 8. | 8S-4677 | [1] | BEARING | |
| (Parts of 8S4678 Housing Assem.) | ||||
| 9. | 0S-1618 H | [1] | BOLT | |
| 10. | 3B-4505 H | [2] | LOCKWASHER | |
| 11. | 4B-5158 | [2] | SCREW | |
| 12. | 1D-4539 H | [1] | BOLT | |
| 8H-5262 | [1] | COUNTER ASSEM. | ||
| 13. | 8H-5961 | [1] | COUNTER | |
| 14. | 8H-5261 | [1] | GEAR (48 Teeth) | |
| (Parts of 8H5262 Counter Assem.) | ||||
| 15. | 9M-7660 | [1] | GASKET | |
| 16. | 4S-7001 | [1] | RETAINER ASSEM. | |
| 5B-6904 | [1] | SPRING | ||
| (Part of 4S7001 Retainer Assem.) | ||||
| 17. | 6B-8241 | [1] | GASKET | |
| 18. | 8M-8515 H | [1] | SEAL | |
| 19. | 5H-1351 | [1] | PIN | |
| 20. | 8L-3885 | [1] | SHAFT ASSEM. | |
| 21. | 7H-4282 | [1] | GEAR (14 Teeth) | |
| 22. | 1B-8703 | [1] | KEY | |
| 23. | 1F-3129 | [1] | PIN | |
| (Parts of 8L3885 Shaft Assem.) | ||||
| 24. | 8B-4128 | [1] | COVER | |
| H | NOT PART OF 8L3886 SERVICE MET | |||
#UEG0040S0045
5L-9022: INSTRUMENT PANEL
  INSTRUMENT PANEL (5L9022 N/S)--Shut-off
Serial No. 68D1 to 68D778, 68D801 to 68D803, 68D805 to 68D807,
68D810 to 68D844 and 68D846 to 68D853 inclusive
Serial No. 68D1 to 68D778, 68D801 to 68D803, 68D805 to 68D807,
68D810 to 68D844 and 68D846 to 68D853 inclusive
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 5H-4349 | [1] | HOSE ASSEM. (22" long) | |
| 2. | 4B-1256 | [2] | SCREW | |
| 3. | 1B-4330 | [6] | NUT | |
| 3B-4504 | [6] | LOCKWASHER | ||
| 4. | 3L-6304 | [2] | BRACE | |
| 5. | 2L-8077 | [1] | TERMINAL | |
| 6. | 4S-8787 | WIRE (Order by the Foot) 2" | ||
| 7. | 2L-8074 | [1] | TERMINAL | |
| 8. | 4B-1219 | [8] | SCREW | |
| 4B-2040 | [8] | NUT | ||
| 9B-1117 | [8] | LOCKWASHER | ||
| 9. | 7B-2742 | [4] | BOLT | |
| 10. | 7H-4155 | [4] | SHOCKMOUNT | |
| 11. | 4H-5451 | [1] | FITTING | |
| 12. | 5L-2574 | [1] | PANEL ASSEM. | |
| 13. | 6L-2308 | [1] | SWITCH (Snap) | |
| 14. | 6L-2309 | [1] | SWITCH (Stop) | |
| 15. | 6L-2310 | [1] | GAUGE (Oil Pressure) | |
| 16. | 6L-2311 | [1] | GAUGE (Water Temperature) | |
| (Parts of 5L2574 Panel Assem.) | ||||
| 17. | 4L-2697 | [2] | SPACER | |
| 18. | 0T-0055 | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 4B-4278 | [2] | WASHER | ||
| 19. | 3L-6303 | [1] | BRACKET | |
| 20. | 4B-0418 | [1] | CLIP | |
| 21. | 4B-6029 | [1] | GROMMET | |
| 22. | 2B-5721 | [1] | GASKET | |
| 23. | 5B-1959 | [1] | ADAPTER | |
| 24. | 3B-6768 | [1] | BUSHING | |
| 25. | 3B-9406 | [1] | FITTING | |
#UEG0040S0046
5L-9022: INSTRUMENT PANEL
  INSTRUMENT PANEL (5L9022 N/S)--Shut-off
Serial No. 68D779, 68D800, 68D804, 68D808,
68D809, 68D845 and 68D854-Up
Serial No. 68D779, 68D800, 68D804, 68D808,
68D809, 68D845 and 68D854-Up
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 5L-1393 | [1] | HOSE ASSEM. (16" Long Overall) | |
| 2. | 4B-1256 | [2] | SCREW | |
| 3. | 1B-4330 | [6] | NUT | |
| 3B-4504 | [6] | LOCKWASHER | ||
| 4. | 3L-6304 | [2] | BRACE | |
| 5. | 2L-8077 | [1] | TERMINAL | |
| 6. | 4S-8787 | WIRE (Order by the foot) 2" | ||
| 7. | 2L-8074 | [1] | TERMINAL | |
| 8. | 4B-1219 | [8] | SCREW | |
| 4B-2040 | [8] | NUT | ||
| 9B-1117 | [8] | LOCKWASHER | ||
| 9. | 7B-2742 | [4] | BOLT | |
| 10. | 7H-4155 | [4] | SHOCKMOUNT | |
| 11. | 2L-6094 | [1] | ELBOW | |
| 12. | 5L-2574 | [1] | PANEL ASSEM. | |
| 13. | 6L-2308 | [1] | SWITCH (Snap) | |
| 14. | 6L-2309 | [1] | SWITCH (Stop) | |
| 15. | 6L-2310 | [1] | GAUGE (Oil Pressure) | |
| 16. | 6L-2311 | [1] | GAUGE (Water Temperature) | |
| 17. | 4L-2697 | [2] | SPACER | |
| 18. | 0T-0055 | [2] | BOLT | |
| 3B-4506 | [2] | LOCKWASHER | ||
| 4B-4278 | [2] | WASHER | ||
| 19. | 3L-6303 | [1] | BRACKET | |
| 20. | 4B-0418 | [2] | CLIP | |
| 21. | 4B-6029 | [2] | GROMMET | |
| 22. | 2B-5721 | [1] | GASKET | |
| 23. | 5B-1959 | [1] | ADAPTER | |
| 24. | 2N-6573 | [1] | TUBE | |
| 25. | 1F-7552 | [1] | FITTING | |
| 1F-1344 | [1] | NUT | ||
| 26. | 3B-8995 | [1] | FITTING | |
| 1F-1344 | [1] | NUT | 
#UEG0040S0047
7L-0463: GOVERNOR AND DRIVE GROUP
  7L463 GOVERNOR AND DRIVE GROUP--Part 1 of 3
Serial No. 68D1 to 68D345, 68D347 to 68D357 and 68D367 to 68D370 inclusive
Only separate parts serviced. When complete Group is required order 2N3897 shown on Page 22C-2
Serial No. 68D1 to 68D345, 68D347 to 68D357 and 68D367 to 68D370 inclusive
Only separate parts serviced. When complete Group is required order 2N3897 shown on Page 22C-2
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 1B-8702 | [1] | KEY | |
| 2. | 7L-0156 | [1] | LEVER | |
| 3. | 7L-0152 | [1] | SHAFT | |
| 4. | 0S-1618 | [2] | BOLT | |
| 5. | 3B-4505 | [3] | LOCKWASHER | |
| 6. | 7L-0552 | [1] | GASKET | |
| 7. | 0S-1615 | [3] | BOLT | |
| 9M-6293 | [1] | LOCK | ||
| 8. | 2S-4421 | [1] | WEIGHT ASSEM. | |
| 9. | 2S-0101 | [2] | WEIGHT | |
| 10. | 1S-5440 | [2] | DOWEL | |
| (Parts of 2S4421 Weight Assem.) | ||||
| 11. | 7L-0457 | [1] | HOUSING ASSEM. | |
| 8M-8403 | [1] | GUIDE | ||
| 2S-7905 | [1] | PLUG | ||
| 12. | 8H-9180 | [1] | SEAL | |
| 13. | 9S-0798 | [1] | BEARING | |
| 14. | 8S-0134 | [1] | BEARING | |
| (Parts of 7L457 Housing Assem.) | ||||
| 15. | 8L-4341 | [1] | SHAFT | |
| 16. | 7B-8105 | [1] | RING | |
| 17. | 5D-0353 | [1] | BOLT | |
| 8L-5394 | [1] | WASHER | ||
| 18. | 1B-9575 | [2] | BOLT | |
| 19. | 7L-0155 | [1] | GEAR (36 Teeth-Drive) | |
| 20. | 1S-4741 | [1] | CYLINDER | |
| 21. | 9F-6580 | [1] | BOLT | |
| 3B-4504 | [1] | LOCKWASHER | ||
| 22. | 7L-0288 | [1] | SHAFT ASSEM. (11 Teeth) | |
#UEG0040S0048
7L-0463: GOVERNOR AND DRIVE GROUP
  7L463 GOVERNOR AND DRIVE GROUP--Part 2 of 3
Serial No. 68D1 to 68D345, 68D347 to 68D357 and 68D367 to 68D370 inclusive
Only separate parts serviced. When complete Group is required order 2N3897 shown on Page 22C-2
Serial No. 68D1 to 68D345, 68D347 to 68D357 and 68D367 to 68D370 inclusive
Only separate parts serviced. When complete Group is required order 2N3897 shown on Page 22C-2
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 8M-8997 | [1] | SEAL | |
| 2. | 7L-8777 | [1] | SLEEVE | |
| 3. | 7S-8447 | [1] | PISTON AND VALVE ASSEM. | |
| 4. | 3K-0810 | [1] | RING | |
| 5. | 7M-7193 | [2] | RACE | |
| 6. | 7M-7219 | [1] | BEARING | |
| 7. | 2S-0007 | [1] | SLEEVE | |
| 8. | 8M-8726 | [1] | DOWEL | |
| 9. | 3S-9639 | [1] | SEAT ASSEM. | |
| 10. | 1S-0219 | [1] | BOLT | |
| 2F-4159 | [1] | LOCK | ||
| 11. | 1N-8061 | [1] | LEVER ASSEM. | |
| 12. | 5L-8991 | [1] | GASKET | |
| 13. | 1A-9579 | [1] | BOLT | |
| 14. | 3B-4505 | [3] | LOCKWASHER | |
| 15. | 8L-5344 | [1] | COVER ASSEM. | |
| 16. | 4B-9880 | [1] | BALL | |
| (Part of 8L5344 Cover Assem.) | ||||
| 17. | 7L-0153 | [1] | COVER | |
| 18. | 2S-7314 | [1] | GASKET | |
| 19. | 8H-9181 | [1] | SPRING | |
| 20. | 8M-9140 | [1] | SPRING (Outer) | |
| 21. | 9M-6302 | [2] | WASHER | |
| 22. | 9M-6303 | [1] | SPRING (Inner) | |
| 23. | 8M-8993 | [1] | RING | |
| 24. | 2S-0008 | [1] | SEAT | |
| 25. | 2B-2695 | [1] | BOLT | |
#UEG0040S0049
7L-0463: GOVERNOR AND DRIVE GROUP
  7L463 GOVERNOR AND DRIVE GROUP--Part 3 of 3
Serial No. 68D1 to 68D345, 68D347 to 68D357 and 68D367 to 68D370 inclusive
Only separate parts serviced. When complete Group is required order 2N3897 shown on Page 22C-2
Serial No. 68D1 to 68D345, 68D347 to 68D357 and 68D367 to 68D370 inclusive
Only separate parts serviced. When complete Group is required order 2N3897 shown on Page 22C-2
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments | 
|---|---|---|---|---|
| 1. | 2S-8061 | [1] | BOLT (Adjusting) | |
| 2. | 7L-0149 | [1] | BOLT | |
| 5M-3034 | [1] | NUT | ||
| 4M-9648 | [1] | WASHER | ||
| 3. | 0S-1617 | [4] | BOLT | |
| 3B-4505 | [4] | LOCKWASHER | ||
| 4. | 7L-0290 | [1] | HOUSING ASSEM. | |
| 8L-6376 | [1] | BEARING | ||
| 5. | 2F-4547 | [2] | DOWEL | |
| 6. | 5M-6214 | [1] | PLUG | |
| (Parts of 7L290 Housing Assem.) | ||||
| 7. | 3H-2023 | [1] | DOWEL | |
| 8. | 5M-6228 | [1] | BEARING | |
| 9. | 9F-4522 | [1] | GASKET | |
| 10. | 9M-4690 | [1] | PLUG | |
| 11. | 1F-4622 | [1] | BEARING | |
| 12. | 2M-2489 | [1] | SEAL | |
| 13. | 8L-4843 | [1] | LEVER | |
| 14. | 5H-9839 | [1] | PIN | |
| 15. | 7L-0224 | [1] | SHAFT | |
Information:
SERVICE EQUIPMENT AND SUPPLIES
 
GASKET & SEAL KITS
 
Engine News 
                               
Special Instruction 
  
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
      Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
      Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
      Installation Of Crankshaft Seals And Wear Sleeves{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
      Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
      Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
      Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
     Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD 
  
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
     Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia 
      
Service Letter-CFEL 
      
Service Letter-CSARL 
      
Service Letter-Americas 
      
Service Letter-Brazil 
      
Service Letter-Truck/Ag/Marine 
      
Service Letter-China 
      
Service Letter-Asia 
      
Service Letter-APD 
      
Service Magazine 
                                   
 
 
 
 
 
 
 
 
 
 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
 


