COOLING SYSTEM
RADIATOR GPPOWER TRAIN
WHEEL GPDIFFERENTIAL & BEVEL GEAR GP
WHEEL GP
DIFFERENTIAL & BEVEL GEAR GP
WHEEL GP
DIFFERENTIAL & BEVEL GEAR GP
COOLING SYSTEM
RADIATOR GP#UEG0044S0430
1V-0132: VANDALISM PROTECTION ARRANGEMENT
1V132 VANDALISM PROTECTION ARRANGEMENT--Factory Installation
FOR USE WITH CAB OR CANOPY
FOR USE WITH CAB OR CANOPY
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS#UEG0044S0431
2S-6096: COVER GP-PROTECTION
2S6096 PROTECTION COVER GROUP--Radiator Cap
Also part of 1V132 Vandalism Protection Arrangement listed on Page 134B
Also part of 1V132 Vandalism Protection Arrangement listed on Page 134B
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-2846 | [1] | RETAINER-GASKET | |
| 2. | 9S-9979 | [1] | RING-RETAINING | |
| 3. | 2P-3230 C | [1] | GASKET | |
| 4. | 1M-8649 | [1] | RING-RETAINING | |
| 5. | 5P-8502 | [1] | PADLOCK GROUP (RADIATOR CAP) | |
| 5P-8500 | [2] | KEY | ||
| 6. | 7N-2957 C | [1] | COVER-RADIATOR CAP | |
| 7. | 7N-5565 C | [1] | CAP-RADIATOR | |
| 8. | 2S-6097 C | [1] | TANG | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#UEG0044S0432
7K-8755: RIM GROUP
7K8755 RIM GROUP--4 Required--17.50 x 25 Tubeless Tires
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | RIM ASSEM. | ||
| [1] | VALVE ASSEM. | |||
| 2. | [1] | STEM | ||
| 3. | [1] | NUT | ||
| 4. | [1] | WASHER | ||
| 5. | [1] | GROMMET | ||
| 6. | [1] | HOUSING ASSEM. | ||
| 7. | [1] | CORE | ||
| 8. | [1] | CAP | ||
| 9. | [1] | SEAL | ||
| 10. | [8] | NUT | ||
| 11. | [1] | FLANGE | ||
| 12. | [1] | RING | ||
#UEG0044S0433
7K-1579: DIFFERENTIAL GROUP
7K1579 DIFFERENTIAL GROUP--Torque Proportioning--Type 1
Serial No. 62K1 to 62K4226 inclusive
FOR USE WITH FRONT AND REAR AXLE
Serial No. 62K1 to 62K4226 inclusive
FOR USE WITH FRONT AND REAR AXLE
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 7K-1821 | [2] | GEAR | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 5K-5613 | [4] | PINION (6 Teeth-Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 7K-2356 | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 5K-5614 | [8] | PINION (5 Teeth-Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 C | [2] | RING (Internal) | |
| 13. | 0S-0214 | [24] | BOLT | |
| 4S-8743 H | LOCKWIRE 56" | |||
| 14. | 6K-1815 | [8] | PIN | |
| 15. | 5K-5522 | [1] | CASE | |
| 16. | 7K-1578 | [2] | COVER ASSEM. | |
| 17. | 6K-1984 | [2] | DOWEL | |
| 7K-8647 J | [1] | PLATE | ||
| 4B-4158 J | [4] | SCREW | ||
| (Mounted on R.H. side of Dash) | ||||
| H | ORDER BY THE FOOT | |||
| J | NOT SHOWN | |||
| C | INDICATES CHANGE | |||
#UEG0044S0434
7K-5419: RIM GROUP
7K5419 RIM GROUP--4 Required--15.50 x 25 Tubeless Tires
Only separate parts serviced
When Complete Group is required order 7K3659
Only separate parts serviced
When Complete Group is required order 7K3659
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-5420 | [1] | RIM ASSEM. | |
| 6K-0249 | [1] | VALVE ASSEM. | ||
| 2. | [1] | STEM | ||
| 3. | 2D-2631 | [1] | NUT | |
| 4. | 2D-2630 | [1] | WASHER | |
| 5. | 2D-2629 | [1] | GROMMET | |
| 6. | 6D-0443 | [1] | HOUSING ASSEM. | |
| 7. | 2D-2628 | [1] | CORE | |
| 8. | 2D-2633 | [1] | CAP | |
| (Parts of 6D443 Assem.) | ||||
| 9. | 4K-4879 | [1] | SEAL | |
| 10. | 6K-9316 | [8] | NUT | |
| 11. | 4K-4880 | [1] | FLANGE | |
| 12. | 4K-4881 | [1] | RING | |
#UEG0044S0435
7K-1579: DIFFERENTIAL GROUP
7K1579 DIFFERENTIAL GROUP--Torque Proportioning--Type 2
Serial No. 62K1 to 62K4226 inclusive
FOR USE WITH FRONT AND REAR AXLE
Serial No. 62K1 to 62K4226 inclusive
FOR USE WITH FRONT AND REAR AXLE
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 9K-8597 C | [2] | GEAR | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 9K-8560 C | [4] | PINION (6 Teeth Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 9K-9921 C | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 9K-8561 C | [8] | PINION (5 Teeth Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 C | [1] | RING (Internal) | |
| 13. | 0S-0214 | [24] | BOLT | |
| 4S-8743 H | LOCKWIRE 56 IN | |||
| 14. | 9K-8318 C | [8] | PIN | |
| 15. | 9K-6968 C | [1] | CASE | |
| 16. | 9K-4914 C | [2] | COVER ASSEM. | |
| 17. | 6K-1984 | [2] | DOWEL | |
| 18. | 9K-4909 | [1] | BEARING | |
| 7K-8647 J | [1] | PLATE | ||
| 4B-4158 | [4] | SCREW | ||
| (Mounted on R.H. Side of Dash) | ||||
| H | ORDER BY THE FOOT | |||
| J | NOT SHOWN | |||
| C | INDICATES CHANGE | |||
#UEG0044S0436
7K-1579: DIFFERENTIAL GROUP
7K1579 DIFFERENTIAL GROUP--Torque Proportioning--Type 3
Serial No. 62K1 to 62K4226 inclusive
FOR USE WITH FRONT AND REAR AXLE
Serial No. 62K1 to 62K4226 inclusive
FOR USE WITH FRONT AND REAR AXLE
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 9K-8597 | [2] | GEAR | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 9K-8560 | [4] | PINION (6 teeth center) | |
| 6. | 5K-5611 | [4] | SHAFT (center) | |
| 7. | [8] | PLATE (wear) | ||
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 9K-8561 | [8] | PINION (5 teeth-outer) | |
| 11. | 5K-5706 | [8] | SHAFT (outer) | |
| 12. | 2D-1523 | [1] | RING (internal) | |
| 13. | 5H-9707 C | [24] | BOLT | |
| 3P-1389 CH | LOCKWIRE 14.22 dm(56 in.) | |||
| 14. | 9K-8318 | [8] | PIN | |
| 15. | 9K-8915 C | [1] | CASE | |
| 16. | 9K-4914 | [2] | COVER ASSEM. | |
| (Includes) | ||||
| 17. | 6K-1984 | [2] | DOWEL | |
| 18. | 9K-4909 | [1] | BEARING | |
| 7K-8647 J | [1] | PLATE | ||
| 4B-4158 | [4] | SCREW | ||
| (Mounted on R.H. Side of Dash) | ||||
| H | ORDER BY THE DECIMETRE | |||
| J | NOT SHOWN | |||
| C | INDICATES CHANGE | |||
#UEG0044S0437
7K-3659: RIM GROUP
7K3659 RIM GROUP--15.50 X 25 Tubeless Tires--4 Required
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-3913 | [1] | RIM ASSEM. | |
| 2. | 6K-0249 C | [1] | VALVE ASSEM. | |
| (Includes) | ||||
| 3. | 2D-2631 | [1] | NUT | |
| 4. | 2D-2630 | [1] | WASHER | |
| 5. | 2D-2629 | [1] | GROMMET | |
| 6. | 6D-0443 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 7. | 2D-2628 | [1] | CORE | |
| 8. | 2D-2633 | [1] | CAP | |
| 9. | 4K-4879 | [1] | SEAL | |
| 10. | 6K-9316 | [8] | NUT | |
| 11. | 7K-3657 | [1] | FLANGE | |
| 12. | 7K-3658 | [1] | RING | |
| C | INDICATES CHANGE | |||
#UEG0044S0438
8K-7610: DIFFERENTIAL GROUP
8K7610 DIFFERENTIAL GROUP--Torque Proportioning
Serial No. 62K4227-Up
FOR USE WITH FRONT AND REAR AXLE
Serial No. 62K4227-Up
FOR USE WITH FRONT AND REAR AXLE
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS#UEG0044S0439
9K-1394: DIFFERENTIAL GROUP
9K1394 DIFFERENTIAL GROUP--Type 1
Serial No. 62K4227-Up
Part of 8K7610 Differential Group
Serial No. 62K4227-Up
Part of 8K7610 Differential Group
Parts for your 920 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [2] | DISC | ||
| 2. | [2] | SPRING | ||
| 3. | [2] | GEAR | ||
| 4. | [2] | RING (External) | ||
| 5. | [4] | PINION (6 Teeth Center) | ||
| 6. | [4] | SHAFT (Center) | ||
| 7. | [8] | PLATE (Wear) | ||
| 8. | [1] | CASE | ||
| 9. | [4] | PIN | ||
| 10. | [8] | PINION (5 Teeth Outer) | ||
| 11. | [8] | SHAFT (Outer) | ||
| 12. | [1] | RING (Internal) | ||
| 13. | [24] | BOLT | ||
| H | LOCKWIRE 56 in. | |||
| 14. | [8] | PIN | ||
| 15. | [2] | COVER ASSEM. | ||
| 16. | [2] | DOWEL | ||
| H | ORDER BY THE FOOT | |||
Information:
COOLING SYSTEM
RADIATOR GP
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Instructions for Use of Cat<SUP>®</SUP> Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}
Instructions for Use of Cat® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}
Instructions for Use of Cat® Coolant Conditioner for Modular Core Aluminum Radiators {1350, 1350, 1352, 1353, 1395}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Tool Operating Manual
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Service Magazine
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23
1987/03/23



