AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3N9492 AIR STARTING SILENCER GROUP FOR USE WITH 3N9499, 3N9497, 3N9500 AND 3N9498 AIR STARTING MOTOR GROUPS SHOWN ON PAGES 59A, 59B, 61A AND 61B D379


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
WIRING GP
STARTING GP-AUTOMATIC
STARTING MOTOR GP

INDUSTRIAL ENGINE D379 INDUSTRIAL ENGINE 68B
 D379B ENGINE 68B01616-02539 UEG0049S D379 68B   (1961)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
CHANGEOVER GP
4N-6019 CHANGEOVER GP
CHANGEOVER GP
4N-4985 CHANGEOVER GP
SILENCER GP-AIR STARTING
3N-9492 SILENCER GP-AIR STARTING
SILENCER GP-AIR STARTING
7L-6912 SILENCER GP-AIR STARTING
HYDRAULIC STARTING SYSTEM
6L-9457 HARDWARE GP
 

#UEG0049S0160
 

3N-9492: SILENCER GP-AIR STARTING

3N9492 AIR STARTING SILENCER GROUP
FOR USE WITH 3N9499, 3N9497, 3N9500 AND 3N9498 AIR STARTING MOTOR GROUPS SHOWN
ON PAGES 59A, 59B, 61A AND 61B
c156562 UEG0049S
3N9492 SILENCER GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4725 [1] SILENCER  
2. 0L-0478 [1] BOLT  
  1B-4203 [1] NUT  
  5M-2894 [1] WASHER  
  1H-0767 [1] SPACER  
3. 3B-4506 [7] LOCKWASHER  
4. 5N-2595 [1] BRACKET  
5. 1A-2029 [2] BOLT  
  4B-1040 [8] WASHER  
6. 5N-2596 [1] BRACKET  
7. 0S-1625 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  8D-1251 [2] SPACER  
8. 3B-7296 [1] NIPPLE  
9. 3B-6500 [1] ELBOW  
10. 3N-9382 [1] PIPE  
11. 0S-1571 [4] BOLT  
12. 3N-9309 [1] FLANGE  
13. 1H-4768 [1] GASKET  
14. 5F-6658 [1] JAR  
15. 7H-2444 [1] SEAL  
16. 2L-3658 [1] STRAP  
  8F-3273 [1] LINING  
 

#UEG0049S0161
 

7L-6912: SILENCER GP-AIR STARTING

7L6912 AIR SILENCER AND VAPOR ARRESTER GROUP
Replaced by 3N9422 shown on Page 64C
FOR USE WITH AIR STARTING MOTORS
c104941 UEG0049S
7L6912 SILENCER GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] SILENCER  
2. [1] GASKET  
3. [1] ELBOW  
4. [2] BOLT (3.25" Long)  
5. [4] LOCKWASHER  
6. [2] BOLT (1.25" Long)  
7. [1] GASKET  
8. [4] BOLT  
9. [4] LOCKWASHER  
10. [1] JAR  
11. [1] RING  
 

#UEG0049S0162
 

HYDRAULIC STARTING SYSTEM

HYDRAULIC STARTING SYSTEM
FOR TEMPERATURES BELOW 60 DEGREES F. USE EITHER GLOW PLUGS, WATER
HEATER OR ETHER STARTING AIDS. CANNOT BE USED WITH CHARGING
GENERATORS OR ALTERNATORS
UEG0049S0162 UEG0049S
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6L-9457 Y [1] HARDWARE AND DRIVE GROUP  
  2L-3333 [1] HYDRAULIC GAUGE  
  2L-8342 [1] HYDRAULIC HAND PUMP  
  2L-8343 [1] ACCUMULATOR  
  [1] DIAGRAM FOR USE ABOVE 60 DEGREES F.  
  6L-2852 [3] RESERVOIR MOUNTING STRAP  
  6L-2666 [1] STARTER CONTROL VALVE FOR USE ABOVE 40 DEGREES F.  
  6L-2853 [1] RESERVOIR FOR USE ABOVE 60 DEGREES F.  
  6L-4241 [1] RESERVOIR FOR USE BELOW 60 DEGREES F.  
  6L-4694 [1] STARTER CONTROL VALVE FOR USE BELOW 40 DEGREES F.  
  6L-8720 [1] RECHARGING PUMP ASSEMBLY  
  7L-8656 [1] HYDRAULIC CRANKING MOTOR FOR USE ABOVE 60 DEGREES F.  
  7L-8657 [1] HYDRAULIC CRANKING MOTOR FOR USE BELOW 60 DEGREES F.  
  2N-3341 [1] FILTER  
  3L-4238 [8] ACCUMULATOR BRACKET ASSEMBLY  
  4B-4277 [2] WASHER  
  5B-5620 [2] BOLT  
  2L-5683 [2] CLAMP ACCUMULATOR  
  2L-5684 [1] SUPPORT ACCUMULATOR CLAMP  
  4M-5280 [2] NUT  
  3N-9503 [4] ACCUMULATOR ASSEMBLY PISTON TYPE  
    EACH INCLUDES:
  1S-8411 [1] TAG  
  3N-9502 [1] PLATE WARNING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0049S0163
 

6L-9457: HARDWARE GP

6L9457 HARDWARE AND DRIVE GROUP--Type 1
Part of Hydraulic Starting System listed on Page 65
UEG0049S0163 UEG0049S
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1B-8707 [1] KEY DRIVE PULLEY  
  2B-0941 [2] SPACER GUARD ASSEMBLY TO BRACKET ASSEMBLY  
  3B-1915 [2] BOLT GUARD ASSEMBLY TO ACCESSORY DRIVE HOUSING  
  3B-4505 [2] LOCKWASHER 5/16"  
  3B-4506 [5] LOCKWASHER 3/8"  
  3B-4508 [4] LOCKWASHER 1/2"  
  3B-4510 [5] LOCKWASHER 5/8"  
  3B-4622 [1] COTTER PIN DRIVE PULLEY ACCESSORY SHAFT  
  3B-5412 [1] NUT DRIVE PULLEY  
  4B-3388 [2] BOLT PUMP TO BRACKET ASSEMBLY  
  4B-4277 [4] WASHER BOLT  
  4B-4278 [10] WASHER BOLT  
  4B-4280 [4] WASHER U-BOLT  
  4B-4281 [4] WASHER  
  5B-7852 [1] COVER FLYWHEEL HOUSING  
  5B-8978 [2] TEE RESERVOIR ASSEMBLY  
  8B-2664 [2] BUSHING VALVE REDUCER  
  8B-2664 [6] BUSHING ACCUMULATOR  
  8B-7179 [1] SET SCREW PULLEY TO PUMP SHAFT  
  1D-4716 [2] NUT BOLT  
  1D-4717 [1] NUT BOLT  
  1D-4719 [4] NUT U-BOLT  
  1D-4720 [2] NUT BOLT  
  2D-0058 [5] UNION-STRAIGHT HOSE COUPLING  
  2D-3134 [2] U-BOLT VALVE  
  2D-8910 [2] UNION 90 DEGREES  
  3D-8884 [1] ELBOW 90 DEGREES HIGH PRESSURE TO GAUGE  
  4D-3763 [8] COUPLING  
  4D-4917 [3] FITTING ADAPTER-UNION ACCUMULATOR  
  6F-0253 [3] LOCKWASHER BOLT  
  2H-3940 [3] UNION 90 DEGREES  
  2H-9091 [1] UNION-STRAITH MOTOR OUTLET  
  4H-2243 [16] COUPLING HIGH PRESSURE HOSE  
  3L-6309 [1] VEE BELT PUMP DRIVE  
  4L-7412 [2] ADAPTER RECHARGING PUMP  
  5L-1156 [1] PULLEY PUMP DRIVE  
  5L-1413 [1] PULLEY R.H. UPPER FRONT ACCESSORY DRIVE  
  5L-3940 [1] GUARD ASSEMBLY PUMP DRIVE  
  5L-5502 [2] SERVICE TEE HIGH PRESSURE LINES  
  6L-2959 [300"] HOSE  
  6L-4697 [3] SCREW STARTING MOTOR  
  6L-7345 [1] BRACKET ASSEMBLY PUMP MOUNTING  
  6L-9456 [1] BRACKET ASSEMBLY PUMP MOUNTING  
  5S-9630 [240"] HOSE  
  0S-1566 [2] BOLT  
  0S-1571 [1] BOLT GUARD ASSEMBLY TO BRACKET ASSEMBLY  
  0S-1592 [3] BOLT COVER TO HOUSING  
  0S-1594 [2] BOLT BRACKET TO ACCESSORY DRIVE HOUSING  
  [1] WASHER DRIVE PULLEY  
 

#UEG0049S0164
 

6L-9457: HARDWARE GP

6L9457 HARDWARE AND DRIVE GROUP--Type 2
Part of Hydraulic Starting System listed on Page 65
c131180 UEG0049S
6L9457 HARDWARE GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-4697 [3] BOLT (1.50" long)  
  6F-0253 [3] LOCKWASHER (Shakeproof)  
  0S-1592 [3] BOLT (1.25" long)  
2. 3B-4510 [5] LOCKWASHER  
3. 5B-7852 [1] COVER  
4. 5L-3940 [1] GUARD ASSEM.  
5. 3B-1915 [2] BOLT  
6. 3B-4506 [5] LOCKWASHER  
  4B-4278 [10] WASHER  
7. 1B-8707 [1] KEY  
8. 5L-1413 [1] PULLEY  
  3B-5412 [1] NUT  
  3B-4622 [1] COTTER PIN  
  9S-1302 [1] WASHER  
9. 2H-3940 [1] UNION  
10. 4L-7412 [2] ADAPTER  
11. 6L-7345 [1] BRACKET ASSEM.  
12. 4B-3388 [2] BOLT  
  1D-4716 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  4B-4277 [4] WASHER  
13. 2D-8910 [1] UNION  
14. 5L-1156 [1] PULLEY  
  8B-7179 [1] SCREW  
15. 0S-1571 [1] BOLT  
  1D-4717 [1] NUT  
  2B-0941 [1] SPACER  
16. 6L-9456 [1] BRACKET ASSEM.  
17. 0S-1566 [2] BOLT  
  1D-4720 [2] NUT  
  4B-4281 [4] WASHER  
18. 0S-1594 [2] BOLT  
19. 3L-6309 [1] BELT  
  2H-3940 [2] UNION 90 degrees (.50" ext. thd.)  
  2D-8910 [1] UNION 90 degrees (.375" ext. thd.)  
  3D-8884 [1] ELBOW 90 degrees  
    (High Pressure to Gauge)
  5L-5502 [2] TEE-HIGH PRESSURE LINES  
  5B-8978 [2] TEE-RESERVOIR ASSEM.  
  6L-2959 H HOSE 240"  
  9S-0671 H HOSE (high pressure) 240"  
  4D-3763 [8] COUPLING  
  2D-3134 [2] U-BOLT VALVE  
  1D-4719 [4] NUT U-BOLT  
  3B-4508 [4] LOCKWASHER (.50" Dia.)  
  4B-4280 [4] WASHER U-BOLT  
  3B-7284 [2] NIPPLE  
  7B-9684 [1] VALVE  
  2H-9091 [3] UNION (.50" ext. thd.)-(Straight)  
  8B-2664 [2] BUSHING-VALVE REDUCER  
  8B-2664 [6] BUSHING-ACCUMULATOR  
  2D-0058 [3] COUPLING (Reducing)  
  4H-2243 [16] COUPLING High Pressure  
  4D-4917 [3] TEE  
    (NOT SHOWN)
  H   ORDER BY THE INCH
 

#UEG0049S0165
 

6L-9457: HARDWARE GP

6L9457 HARDWARE AND DRIVE GROUP--Type 3
Part of Hydraulic Starting System listed on Page 65
c146705 UEG0049S
6L9457 HARDWARE GP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-4697 [3] BOLT (1.50" long)  
  6F-0253 [3] LOCKWASHER (Shakeproof)  
  0S-1592 [3] BOLT (1.25" long)  
2. 3B-4510 [5] LOCKWASHER  
3. 5B-7852 [1] COVER  
4. 5L-3940 [1] GUARD ASSEM.  
5. 3B-1915 [2] BOLT  
6. 3B-4506 [5] LOCKWASHER  
  4B-4278 [10] WASHER  
7. 1B-8707 [1] KEY  
8. 5L-1413 [1] PULLEY  
  3B-5412 [1] NUT  
  3B-4622 [1] COTTER PIN  
  9S-1302 [1] WASHER  
9. 2H-3940 [1] UNION  
10. 4L-7412 [2] ADAPTER  
11. 6L-7345 [1] BRACKET ASSEM.  
12. 4B-3388 [2] BOLT  
  1D-4716 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  4B-4277 [4] WASHER  
13. 2D-8910 [1] UNION  
14. 5L-1156 [1] PULLEY  
  8B-7179 [1] SCREW  
15. 0S-1571 [1] BOLT  
  1D-4717 [1] NUT  
  2B-0941 [1] SPACER  
16. 6L-9456 [1] BRACKET ASSEM.  
17. 0S-1566 [2] BOLT  
  1D-4720 [2] NUT  
  4B-4281 [4] WASHER  
18. 0S-1594 [2] BOLT  
19. 3L-6309 [1] BELT  
  2H-3940 [2] UNION 90 degrees (.50" ext. thd.)  
  2D-8910 [1] UNION 90 degrees (.375" ext. thd.)  
  3D-8884 [1] ELBOW 90 degrees  
    (High Pressure to Gauge)
  5L-5502 [2] TEE-HIGH PRESSURE LINES  
  5B-8978 [2] TEE-RESERVOIR ASSEM.  
  5P-1400 CJ HOSE 305 cm(120.07 in.)  
  9S-0671 CH HOSE (high pressure) (480 in.)  
  3N-6922 C [2] COUPLING  
  2D-3134 [2] U-BOLT VALVE  
  1D-4719 [4] NUT U-BOLT  
  3B-4508 [4] LOCKWASHER (.50" Dia.)  
  4B-4280 [4] WASHER U-BOLT  
  3B-7284 [2] NIPPLE  
  7B-9684 [1] VALVE  
  2H-9091 [3] UNION (.50" ext. thd.)-(Straight)  
  7D-0702 C [1] UNION  
  8B-2664 C [7] BUSHING  
  007-0950 C [1] ADAPTER  
  4H-2243 C [22] COUPLING (high pressure)  
  4D-4917 [3] TEE  
    (NOT SHOWN)
  H   ORDER BY THE INCH
  J   ORDER BY THE CENTIMETRE
  C   INDICATES CHANGE
 

#UEG0049S0166
 

8L-4849: WIRING GP

8L4849 WIRING GROUP
Refer to Automatic Start-Stop Chart shown on Pages 67, 67A & 67A-1 for usage
UEG0049S0166 UEG0049S
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4S-8784 WIRE (NO. 6) 5 FOOT  
  4S-8785 WIRE (NO. 10) 6 FOOT  
  4S-8787 WIRE (NO. 14) 35 FOOT  
  2L-8049 [2] TERMINAL (NO. 10 SCREW)  
  2L-8052 [1] TERMINAL (3/8" SCREW)  
  2L-8054 [2] TERMINAL (1/2" SCREW)  
    (USED WITH NO. 6 WIRE)
  2L-8065 [2] TERMINAL (NO. 8 SCREW)  
  2L-8067 [3] TERMINAL (1/4" SCREW)  
  2L-8071 [2] TERMINAL (1/2" SCREW)  
    (USED WITH NO. 10 WIRE)
  2L-8074 [2] TERMINAL (NO. 6 SCREW)  
  2L-8076 [21] TERMINAL (NO. 10 SCREW)  
  2L-8079 [2] TERMINAL (3/8" SCREW)  
    (USED WITH NO. 14 WIRE)
  5P-1475 [2] TERMINAL SPRING SPADE (14-16 NO. 8 SCREW)  
  5P-1476 [2] TERMINAL SPRING SPADE (14-16 NO. 10 SCREW)  
  5P-1477 [2] TERMINAL SPRING SPADE (10-12 NO. 8 SCREW)  
  5P-1478 [2] TERMINAL SPRING SPADE (10-12 NO. 10 SCREW)  
  5D-5569 [1] CONNECTOR SEALING GRIP  
  1H-5166 [6] CLIP (3.50" LONG)  
  2H-2143 [1] MARKER (CARD OF)  
  2H-2965 [2] SPLICE WIRE  
  4H-8310 [2] STRAP CONNECTOR  
  2L-9724 [6] CLIP (2.50" LONG)  
  5L-2579 [2] GROMMET JUNCTION BOX  
  6L-8150 [1] JUMPER TERMINAL STRIP  
  8L-8413 [75] TIE (5.50" LONG)  
  [3] SPLICE WIRE  
  3S-2093 [6] TIE (7.31" LONG)  
  3N-5681 [1] TIE CABLE  
 

#UEG0049S0167
 

1N-8294: AUTOMATIC START-STOP ARRANGEMENT

1N8294 AUTOMATIC START-STOP ARRANGEMENT--24 Volt
Replaced by 3N878 shown on Page 67A
FOR USE WITH WOODWARD GOVERNOR
UEG0049S0167 UEG0049S
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8L-4244 Y [1] JUNCTION BOX GROUP  
  8L-4249 Y [1] CONTACTOR GROUP  
  8L-4849 Y [1] WIRING GROUP  
  1N-8292 Y [1] ELECTRIC STARTING MOTOR GROUP  
  1N-8293 Y [1] SOLENOID SHUT-OFF GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0049S0168
 

3N-0878: START/STOP AR-AUTOMATIC

3N878 AUTOMATIC START-STOP ARRANGEMENT--32 Volt
Only separate parts serviced
UEG0049S0168 UEG0049S
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8L-4249 Y [1] CONTACTOR GROUP  
  8L-4849 Y [1] WIRING GROUP  
  1N-8293 Y [1] SOLENOID SHUT-OFF GROUP  
  3N-0742 Y [1] ELECTRIC STARTING MOTOR GROUP  
  3N-0857 Y [1] JUNCTION BOX GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0049S0169
 

1N-8292: ELECTRIC STARTING MOTOR GROUP

1N8292 ELECTRIC STARTING MOTOR GROUP--32 Volt
Part of 1N8294 Automatic Start-Stop Arrangement listed on Page 67
8L5938 Motor parts are shown on Page 68
c105216 UEG0049S
1N8292 ELECTRIC STARTING MOTOR GROUP Parts scheme
  For full view, you need register

Parts for your D379 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5L-5891 [1] SWITCH (Magnetic)  
  2M-0912 [1] TERMINAL  
    (Part of Cable Assem. 6F9279)
  6F-9009 [1] BAND  
  2M-0913 [1] TERMINAL  
    (Part of Cable Assem. 6F9279)
  6F-9279 [1] CABLE ASSEM.  
  5B-7852 [1] COVER  
  0S-1592 [3] BOLT  
  3B-4510 [3] LOCKWASHER  
  6F-9008 [1] BRACKET  
  4B-2152 [4] BOLT  
  1B-4201 [4] NUT  
  3B-4504 [4] LOCKWASHER  
  4B-4276 [4] WASHER  
  3H-0510 [1] GASKET  
  0S-1566 [3] BOLT  
  3B-4510 [3] LOCKWASHER  
  8L-5938 Y [1] MOTOR  
    (See Separate Illustration)
  3H-0510 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

Information:

General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
New Air Starting Motor Group Available
1982/08/25
New Air Starting Motor Has A Slip-Clutch Type Drive Gear
1983/10/26
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors
1987/02/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts
1987/03/01
Testing The Starter On The Engine
1987/05/01
Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01
Be Sure Battery Cable To Starter Connection Has Correct Torque
1988/03/01
Magnetic Switches (Starter Relays) Improved
1988/03/01
Air Starter Relay Valve Improved
1991/07/01
Improved Remanufactured Electric Starting Motors are Now Available {1453}
2003/11/01
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Solenoid (Starting Motor) &minus; Replace{1467}
Solenoid (Starting Motor) − Replace{1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starting Motors
D399, G399, D398, G398, D379, G379 ENGINES
Starter Solenoids
D399, G399, D398, G398, D379, G379 ENGINES
Prelube Motor Relay; (Later Type)
D399, G399, D398, G398, D379, G379 ENGINES
Air Valves For Air Starting System
D399, G399, D398, G398, D379, G379 ENGINES
Prelubrication Pump And Air Motor
D399, G399, D398, G398, D379, G379 ENGINES
Air Starting Motors<BR> (3H3170, 3H3171)
D399, G399, D398, G398, D379, G379 ENGINES
Prelube Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Starter Motor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Starter Solenoids
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Pressure Regulating Valve For Air Starting Motor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Air Starting Motor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Hydraulic Starting Motor
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Charging Pump For Hydraulic Starting
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Hand Pump For Hydraulic Starter
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Pressure Accumulator For Hydraulic Starter
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor
Starting Motor - Delco 50-MT
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
Starting Motor - Delco 50-MT
General Information
Starting Motor - Delco 50-MT
Normal Operation
Starting Motor - Delco 50-MT
Testing and Adjusting
Engaged Starting Motor - Troubleshoot
Electronic Modular Control Panel II (EMCP II) For MUI Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Magnetic Switch - Test
Electronic Modular Control Panel II (EMCP II) For MUI Engines
Starting Motor Solenoid - Test
Starting Motor - Delco 50-MT
Field Winding - Test
Starting Motor - Delco 50-MT
Armature - Test
Starting Motor - Delco 50-MT
Brush and Brush Holder - Check
Starting Motor - Delco 50-MT
Pinion Drive - Check
Starting Motor - Delco 50-MT
No Load - Test
Starting Motor - Delco 50-MT
Pinion Clearance - Adjust
Starting Motor - Delco 50-MT
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Pinion Does Not Engage Ring Gear
Starting Motor - Delco 50-MT
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Pinion Continues to Engage after Engine Starts
Starting Motor - Delco 50-MT
Starting Motor Does Not Turn or Turns Slowly
Starting Motor - Delco 50-MT
Disassembly and Assembly
Air Starting Motor
D399, G399, D398, G398, D379, G379 ENGINES
Prelubrication Oil Pump (D399)
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Sump Pump
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Electric Starting Motors
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Air Starter
D379, D398, D399 INDUSTRIAL & MARINE ENGINES
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
Starting Motor - Delco 50-MT
Starting Motor - Disassemble
Starting Motor - Delco 50-MT
Starting Motor - Assemble
Starting Motor - Delco 50-MT
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
New Air Starting Motor Group Available{1451}
1982/07/19
New Air Starting Motor Has A Slip-Clutch Type Drive Gear{1451}
1983/10/17
New Start Switch Used {1416,1453}
1986/07/07
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Air Starter Relay Valve Improved{1462}
1991/06/24

Caterpillar Parts SIS Catalog D379 :

CHANGEOVER GP
4N-4985 CHANGEOVER GP
CHANGEOVER GP
4N-6019 CHANGEOVER GP
VALVE GP-WHISTLE
3L-9922 VALVE GP-WHISTLE
MOTOR AS-AIR
6L-6731 MOTOR AS-AIR
MOTOR GP-AIR STARTING
3H-3170 MOTOR GP-AIR STARTING
LUG
3H-3171 LUG
LUG
3H-3171 LUG
LUBRICATOR GP-AIR MOTOR
4N-7556 LUBRICATOR GP-AIR MOTOR
SILENCER GP-AIR STARTING
7L-6912 SILENCER GP-AIR STARTING
HYDRAULIC STARTING SYSTEM
6L-9457 HARDWARE GP
HARDWARE GP
6L-9457 HARDWARE GP
HARDWARE GP
6L-9457 HARDWARE GP
8L-4849 WIRING GP
1N-8294 AUTOMATIC START-STOP ARRANGEMENT
3N-0878 START/STOP AR-AUTOMATIC

Truck sale:

CATERPILLAR D379 1988
 
CATERPILLAR D379 1988
- STATIONARY - DIESEL
ZEPPELIN POWER SYSTEMS
Am Holzhafen 7 - Bremen -
CATERPILLAR D379 1988
 
CATERPILLAR D379 1988
- STATIONARY - DIESEL
ZEPPELIN POWER SYSTEMS
Am Holzhafen 7 - Bremen -
 
 
CAT D379

Jeff Martin Auctioneers
Stanton, Texas
1980 CAT D379
Call 
1980 CAT D379

Empire Power Systems
PHOENIX, Arizona
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.