AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View--Part 2 of 2 Serial No. 41K1837 to 41K2502, 2561 to 2563, 2566 to 2578, 2580 to 2585, 2587 to 2596, 2598 & 41K2599 inclusive Refer also to Page 134 for special parts 930


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
BASIC ENGINE
FLYWHEEL GP
CRANKSHAFT GP

WHEEL LOADER 930 WHEEL LOADER 41K
 930 WHEEL LOADER 41K00001-03207 (MACHINE) UEG0055S 930 41K   (1968)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8774 CYLINDER BLOCK AS
 

#UEG0055S0020
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View--Part 2 of 2
Serial No. 41K1837 to 41K2502, 2561 to 2563, 2566 to 2578, 2580 to 2585, 2587 to 2596, 2598 & 41K2599 inclusive
Refer also to Page 134 for special parts
c135455 UEG0055S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 2N-2753 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 9S-8991 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 0T-0101 [4] STUD  
    (Parts of 9S8991 Cover Assem.)
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [1] LOCK  
19. 7S-7043 [2] BUSHING  
20. 7S-7779 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [2] LOCKWASHER  
30. 1A-2029 [3] BOLT  
31. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
32. 8S-8234 [1] PAN ASSEM.  
 

#UEG0055S0021
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--Side View--Part 1 of 2
Serial No. 41K2503 to 41K2560, 2564, 2565, 2579, 2586, 2597 and 41K2600-Up
2P8774 Cylinder Block parts are shown on Page 24A. See Page 26 for Gasket Kits
c141069 UEG0055S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8889 C [4] LINER  
2. 5S-6670 [12] SEAL  
3. 8M-9307 [1] PLUG  
  6F-7062 [1] GASKET  
4. 0L-1351 [21] BOLT  
5. 3B-4506 [62] LOCKWASHER  
6. 5M-1903 [1] COVER  
7. 4M-2250 [1] GASKET  
8. 2P-8774 RYC [1] BLOCK ASSEM.  
    (Separate Illustration)
9. 9S-2273 [1] PLATE ASSEM.  
  5S-7190 [1] STUD  
10. 5S-7134 [1] GASKET  
11. 0S-1594 [8] BOLT  
12. 5M-6214 [1] PLUG  
13. 5S-7135 [1] GASKET  
14. 0L-1143 [9] BOLT  
15. 0S-1588 [18] BOLT  
16. 9S-1760 [1] TUBE  
17. 3B-8998 [2] FITTING  
  1F-1344 [1] NUT  
18. 9S-1799 [1] COVER  
  8S-0877 [1] GASKET  
19. 9H-6067 [1] SEAL  
20. 8S-0499 [1] TUBE ASSEM.  
21. 8S-1963 [1] GASKET  
22. 1A-2029 [6] BOLT  
23. 5S-6045 [1] GASKET  
24. 8S-1959 [1] PLATE ASSEM.  
25. 4F-4879 [1] BOLT  
  0L-0364 [1] LOCK  
26. 7S-0566 [1] HOUSING (Flywheel)  
27. 5M-6213 [4] PLUG  
28. 8M-3023 [4] ORIFICE  
29. 9H-5921 [1] GASKET  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0055S0022
 

7S-7742: CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS (7S7742 N/S)--End View--Part 2 of 2
Serial No. 41K2503 to 41K2560, 2564, 2565, 2579, 2586, 2597, and 41K2600-Up
Refer also to Page 134 for special parts
c135455 UEG0055S
7S7742 CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [8] BOLT  
2. 9S-3188 [1] LOCK  
3. 9S-3187 [1] LOCK  
4. 2N-2753 [1] COVER  
5. 9H-4891 [1] GASKET  
6. 1B-4203 [6] NUT  
7. 3B-4506 [11] LOCKWASHER  
8. 9S-8991 [1] COVER ASSEM.  
9. 3B-2460 [1] STUD  
10. 8S-6814 [2] DOWEL  
11. 0T-0101 [4] STUD  
    (Parts of 9S8991 Cover Assem.)
12. 1C-2251 [2] BOLT  
13. 5S-8055 [1] GASKET  
14. 7S-1803 [1] CAP ASSEM.  
15. 5S-8115 [1] GAUGE ASSEM.  
16. 9S-1796 [1] TUBE ASSEM.  
17. 7S-0637 [1] PIPE  
  7S-1801 [1] ANCHOR  
18. 4M-4419 [1] LOCK  
19. 7S-7043 [2] BUSHING  
20. 7S-7779 [1] SUPPORT ASSEM.  
21. 8S-1326 [1] FITTING  
22. 0S-1595 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
23. 7S-1234 [1] BUSHING ASSEM.  
24. 5M-9131 [1] LOCK  
25. 0S-1587 [13] BOLT  
26. 5M-9136 [1] LOCK  
27. 5M-9132 [1] LOCK  
28. 7M-7205 [2] LOCK  
29. 3B-4508 [2] LOCKWASHER  
30. 1A-2029 [3] BOLT  
31. 4B-2363 [1] PLUG  
  6F-4868 [1] GASKET  
32. 8S-8234 [1] PAN ASSEM.  
 

#UEG0055S0023
 

5S-6407: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY (5S6407 N/S)
Serial No. 41K1 to 41K2502, 2561 to 2563, 2566 to 2578, 2580 to 2585, 2587 to 2596, 2598 & 41K2599 inclusive
Part of Cylinder Block and Covers shown on Pages 22 and 23A
Note: For Field Replacement order 8S3711 Service Block Assembly
c130130 UEG0055S
5S6407 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 8B-1312 [2] DOWEL  
3. 5B-7652 [2] DOWEL  
4. 4B-5387 [3] PLUG  
5. 3S-8313 [2] PLUG  
6. 8B-6349 [2] DOWEL  
7. 5S-8462 [1] STUD  
8. 9M-5477 [1] BEARING  
9. 1H-0974 [1] DOWEL  
10. 8S-4676 [5] CAP GROUP  
  8S-4674 [10] SHIM (Long)  
    (2 in each 8S4676 Group)
  8S-4673 [30] SHIM (Short)  
    (6 in each 8S4676 Group)
    -or-
  1P-2717 [5] BEARING CAP  
11. 7S-3224 [10] BOLT  
12. 2S-5658 [10] WASHER  
13. 8S-0835 [1] DOWEL  
14. 5S-6420 [2] BEARING  
15. 4B-9782 [5] BALL  
16. 5S-6419 [4] BEARING  
17. 2A-3798 [2] DOWEL  
18. 7M-4046 [2] BEARING  
 

#UEG0055S0024
 

2P-8774: CYLINDER BLOCK AS

2P8774 CYLINDER BLOCK ASSEMBLY
Serial No. 41K2503 to 41K2560, 2564, 2565, 2579, 2586, 2597 and 41K2600-Up
Part of Cylinder Block and Covers shown on Page 23C
Note: For Field Replacement order 2P8774 plus 1-2P8783 Hardware Kit
c114501 UEG0055S
2P8774 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLUG  
2. [2] DOWEL  
3. [2] DOWEL  
4. [3] PLUG  
5. [2] PLUG  
6. [2] DOWEL  
7. [1] STUD  
8. [1] BEARING  
9. [1] DOWEL  
10. [5] BEARING CAP  
11. [10] BOLT  
12. [10] WASHER  
13. [1] DOWEL  
14. [2] BEARING  
15. [5] BALL  
16. [4] BEARING  
17. [2] DOWEL  
18. [2] BEARING  
 

#UEG0055S0025
 

5S-6431: CRANKSHAFT

CRANKSHAFT (5S6431 N/S)
c114220 UEG0055S
5S6431 CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-9730 [5] BEARING  
  2P-0716 [2] PLATE  
  9F-2247 [4] PLUG  
    (PART OF CRANKSHAFT ASSEM. 5S5252)
  5S-9022 [1] SEAL  
    -OR-
  5S-6297 [1] SEAL ASSEM.  
    (WITH SLEEVE FOR WORN FLANGE)
  5S-5252 [1] CRANKSHAFT ASSEM.  
  6B-5310 [1] BOLT  
  5S-9948 [1] WASHER  
  5S-9021 [1] SEAL  
  4M-9933 [1] GEAR (40 TEETH)  
  5H-2671 [1] KEY  
    (PARTS OF CRANKSHAFT ASSEM. 5S5252)
  5S-8038 [1] PULLEY  
 

#UEG0055S0026
 

CRANKSHAFT BEARING REPLACEMENT GROUPS

CRANKSHAFT BEARING REPLACEMENT GROUPS
UEG0055S0026 UEG0055S
None CRANKSHAFT BEARING REPLACEMENT GROUPS Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UEG0055S0027
 

GASKET KITS

GASKET KITS
UEG0055S0027 UEG0055S
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8S-9686 DIESEL ENGINE COMPLETE  
  9S-6384 DIESEL ENGINE SUPPLEMENTARY  
  9S-6385 VALVE GRINDING  
  8S-7057 WATER PUMP  
  9S-6386 TRANSMISSION  
  9S-6387 TORQUE CONVERTER  
  9S-6388 TRANSFER GEARS  
 

#UEG0055S0028
 

7S-7877: FLYWHEEL GP

7S7877 FLYWHEEL GROUP
c101372 UEG0055S
7S7877 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-1701 [9] BOLT  
2. 1M-7341 [1] LOCK  
3. 7S-7876 [1] FLYWHEEL ASSEM.  
4. 4S-5737 [1] GEAR (130 Teeth)  
    (Part of 7S7876 Flywheel Assem.)
 

#UEG0055S0029
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
UEG0055S0029 UEG0055S
  For full view, you need register

Parts for your 930 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    BEARINGS FOR REBORED CYLINDER BLOCK
  6N-3822 [5] BEARING MAIN  
    (.020 OVERSIZE AND .010 UNDERSIZE)
  6N-3823 [5] BEARING MAIN  
    (.020 OVERSIZE)
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3304 VEHICULAR ENGINE
Cylinder Liner
3304 VEHICULAR ENGINE
Cylinder Liner Projection
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Crankshaft Main Bearings
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Cylinder Liners
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Camshaft Bearings
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Improved Engine Design Uses Cylinder Block With Spacer Plate{1000}
1979/04/09
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines {1210,1211}
1999/01/18
Improved Seal Kits for Cylinder Liner Kits {1216}
2005/11/14

Caterpillar Parts SIS Catalog 930 :

CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
GLOW PLUG GP
5S-8500 GLOW PLUG GP
BREATHER AND FUMES DISPOSAL
5S-6437 BREATHER AND FUMES DISPOSAL
MUFFLER
MUFFLER
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
7S-7742 CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
5S-6407 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AS
2P-8774 CYLINDER BLOCK AS
CRANKSHAFT
5S-6431 CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
GASKET KITS
FLYWHEEL GP
7S-7877 FLYWHEEL GP

Truck sale:

Caterpillar 930M, Wheel Loaders, Construction
167,500 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 930M, Wheel Loaders, Construction
245,800 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 930M, Wheel Loaders, Construction
135,763 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 930M, Wheel Loaders, Construction
201,289 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 930M, Wheel Loaders, Construction
140,000 
Caterpillar 930M, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.