OPERATOR STATION
PANEL GPFUEL SYSTEM
PUMP GP-FUEL PRIMINGPUMP GP-FUEL TRANSFER
FILTER GP-FUEL
PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION
LINES GP-FUEL
LUBRICATION SYSTEM
PUMP GP-ENGINE OILOPERATOR STATION
PANEL GP#UEG0055S0050
9S-7993: SERVICE METER
SERVICE METER (9S7993 N/S)
Serial No. 41K798-Up
Serial No. 41K798-Up
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9S-3033 | [ 1] | CLAMP | |
2. | 1A-6240 | [ 1] | WASHER | |
3. | 1T-0416 | [ 2] | BOLT | |
3F-9556 | [ 2] | LOCKWASHER | ||
4. | 9S-7992 | [ 1] | SERVICE METER ASSEM. | |
9S-4131 | [ 1] | KIT (Service Meter Window) | ||
(Includes Window, Gasket & Screws) | ||||
5. | 8F-7242 | [ 1] | WASHER | |
6. | 9S-3032 | [ 1] | CLAMP | |
7. | 4M-8303 | [ 1] | SEAL |
#UEG0055S0051
7S-1251: FUEL PRIMING PUMP GROUP
7S1251 FUEL PRIMING PUMP GROUP
9H2256 Pump shown on Page 37
9H2256 Pump shown on Page 37
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8S-0210 | [1] | TUBE (Outlet) | |
2. | 3B-8998 | [3] | FITTING | |
1F-1344 | [1] | NUT | ||
3. | 9H-2256 Y | [1] | PUMP GROUP (Fuel Priming) | |
4. | 8S-0211 | [1] | TUBE (Inlet) | |
5. | 1H-7922 | [1] | FITTING | |
1F-1344 | [1] | NUT | ||
6. | 2B-2695 | [2] | BOLT | |
3B-4505 | [2] | LOCKWASHER | ||
7. | 7S-1129 | [1] | BRACKET | |
Y | SEPARATE ILLUSTRATION |
#UEG0055S0052
7S-4430: FUEL TRANSFER PUMP GROUP
7S4430 FUEL TRANSFER PUMP GROUP
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2F-8616 | [1] | NUT | |
2. | 8H-9806 | [1] | GEAR (11 Teeth-Drive) | |
3. | 3H-1489 | [1] | KEY | |
4. | 8S-4375 | [1] | CAGE ASSEM. | |
5. | 8F-6058 | [1] | BUSHING | |
6. | 4S-7756 | [2] | SEAL | |
7. | 6J-2419 | [2] | SEAL | |
8. | 7S-4439 | [1] | RING | |
9. | 7S-2374 | [1] | GASKET | |
10. | 7S-4434 | [1] | BODY ASSEM. | |
11. | 2S-6838 | [1] | SHAFT | |
12. | 8F-6058 | [1] | BUSHING | |
13. | 3B-4505 H | [2] | LOCKWASHER | |
14. | 4B-3388 H | [2] | BOLT | |
15. | 8S-4368 | [1] | GEAR (10 Teeth-Idler) | |
16. | 8S-5581 | [1] | COVER ASSEM. | |
17. | 8S-5575 | [1] | SEAL | |
18. | 7S-4433 | [2] | FERRULE | |
19. | 7H-3171 | [1] | PLUG | |
20. | 8M-0874 | [1] | PLUNGER ASSEM. | |
21. | 8M-3210 | [1] | SPRING | |
22. | 2A-1913 | [1] | GASKET | |
23. | 7S-4440 | [1] | BOLT | |
24. | 7S-6701 | [2] | SCREW (1.75" long) | |
25. | 9F-6641 | [4] | SCREW (1.25" long) | |
26. | 8S-4373 | [1] | SHAFT ASSEM. (10 Teeth-Drive) | |
H | NOT PART OF 7S4430 FUEL TRANSF |
#UEG0055S0053
5S-9666: FUEL FILTER GROUP
5S9666 FUEL FILTER GROUP
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-1927 | [1] | NEEDLE ASSEM. | |
2. | 7F-3901 | [1] | SEAT | |
3. | 1H-9722 | [1] | PLUG | |
4. | 5S-9580 | [1] | BASE | |
5. | 9S-4167 | [1] | STUD | |
6. | 1P-2299 Y | [1] | FILTER ASSEM. | |
7. | 1B-9575 | [3] | BOLT | |
8F-7242 | [8] | WASHER | ||
8. | 5S-9020 | [1] | GASKET | |
9. | 5S-6333 | [1] | ADAPTER | |
10. | 8H-9402 | [1] | ADAPTER | |
11. | 9H-4557 | [2] | SEAL | |
12. | 5S-9060 | [1] | GASKET | |
13. | 9F-2247 | [1] | PLUG | |
14. | 5M-6214 | [3] | PLUG | |
15. | 4B-3388 | [2] | BOLT 1.25 in.(28.58 mm) long | |
16. | 1D-4538 | [3] | BOLT 2.25 in.(57.15 mm) long | |
Y | SEPARATE ILLUSTRATION |
#UEG0055S0054
9H-2256: PUMP ASSEMBLY
9H2256 PUMP ASSEMBLY
Part of 7S1251 Fuel Priming Pump shown on Page 35
Part of 7S1251 Fuel Priming Pump shown on Page 35
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS#UEG0055S0055
7S-8831: FUEL PUMP HOUSING GROUP
7S8831 FUEL PUMP HOUSING GROUP--Type 1
Part of Fuel Pump Housing and Governor shown on Page 32
Part of Fuel Pump Housing and Governor shown on Page 32
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4M-0411 | [4] | BONNET | ||
8H-9204 | [4] | WASHER | ||
2M-4314 | [4] | BUSHING | ||
9B-1363 | [4] | SPRING | ||
9H-5746 | [4] | CHECK | ||
1M-3506 | [4] | RING | ||
9H-5797 | [4] | PLUNGER AND BARREL ASSEM. | ||
1S-0206 | [4] | SPRING | ||
9H-5729 | [4] | WASHER | ||
3S-9735 | [4] | LIFTER ASSEM. | ||
4M-1474 | [2] | PIN | ||
4F-6024 | [2] | DOWEL | ||
1S-1953 | [1] | BEARING | ||
(Parts of Housing Assem. 7S8830 | ||||
8H-9208 | [1] | DOWEL | ||
(Part of Gear Assem. 5S5058) | ||||
1S-0214 | [1] | SPRING | ||
2S-7905 | [1] | PLUG | ||
(Part of Housing Assem. 7S8830) | ||||
0L-0472 | [1] | BOLT | ||
2H-3504 | [1] | LOCK | ||
8H-9208 | [1] | DOWEL | ||
(Part of Camshaft Assem. 8H9207) | ||||
7M-5940 | [1] | PLATE | ||
5S-5058 | [1] | GEAR ASSEM. | ||
(66 Teeth) | ||||
2A-3746 | [1] | PLUG | ||
2M-8604 | [1] | BEARING | ||
3D-4603 | [1] | PLUG | ||
(Parts of Housing Assem. 7S8830) | ||||
1M-1077 | [4] | SEAL | ||
8M-3020 | [4] | DOWEL | ||
8M-3019 | [4] | DOWEL | ||
(Parts of Housing Assem. 7S8830) | ||||
2M-4208 | [4] | SPACER (.174" Thick) | ||
2M-4209 | [4] | SPACER (.178" Thick) | ||
2M-4210 | [4] | SPACER (.182" Thick) | ||
2M-4211 | [4] | SPACER (.186" Thick) | ||
2M-4212 | [4] | SPACER (.190" Thick) | ||
5M-2691 | [4] | SPACER (.194" Thick) | ||
5M-2697 | [4] | SPACER (.170" Thick) | ||
5S-7189 | [4] | SPACER (.198" Thick) | ||
(Use as required) | ||||
9H-1296 | [1] | BEARING | ||
(Part of Housing Assem. 7S8830) | ||||
2S-0825 | [1] | RACK | ||
9H-1284 | [1] | BEARING | ||
(Part of Housing Assem. 7S8830) | ||||
1M-0690 | [1] | SLEEVE | ||
(Part of Camshaft Assem. 8H9207) | ||||
8H-9207 | [1] | CAMSHAFT ASSEM. | ||
7S-8830 | [1] | HOUSING ASSEM. |
#UEG0055S0056
7S-8831: FUEL PUMP HOUSING GROUP
7S8831 FUEL PUMP HOUSING GROUP--Type 2
Part of Fuel Pump Housing and Governor shown on Page 32
Part of Fuel Pump Housing and Governor shown on Page 32
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
4M-0411 | [4] | BONNET | ||
8H-9204 | [4] | WASHER | ||
2M-4314 | [4] | BUSHING | ||
9B-1363 | [4] | SPRING | ||
9H-5746 | [4] | CHECK | ||
1M-3506 | [4] | RING | ||
9H-5797 | [4] | PLUNGER AND BARREL ASSEM. | ||
1S-0206 | [4] | SPRING | ||
9H-5729 | [4] | WASHER | ||
3S-9735 | [4] | LIFTER ASSEM. | ||
4M-1474 | [2] | PIN | ||
4F-6024 | [2] | DOWEL | ||
1S-1953 | [1] | BEARING | ||
(Parts of Housing Assem. 7S8830 | ||||
8H-9208 | [1] | DOWEL | ||
(Part of Gear Assem. 5S5058) | ||||
1S-0214 | [1] | SPRING | ||
2S-7905 | [1] | PLUG | ||
(Part of Housing Assem. 7S8830) | ||||
0L-0472 | [1] | BOLT | ||
2H-3504 | [1] | LOCK | ||
8H-9208 | [1] | DOWEL | ||
(Part of Camshaft Assem. 8H9207) | ||||
7M-5940 | [1] | PLATE | ||
5S-5058 | [1] | GEAR ASSEM. | ||
(66 Teeth) | ||||
2A-3746 | [1] | PLUG | ||
2M-8604 | [1] | BEARING | ||
2S-7905 C | [1] | PLUG | ||
(Parts of Housing Assem. 7S8830) | ||||
1M-1077 | [4] | SEAL | ||
1P-0233 C | [4] | DOWEL | ||
1P-0231 C | [4] | BALL | ||
1P-0234 C | [4] | DOWEL | ||
1P-0232 C | [4] | BALL | ||
(Parts of Housing Assem 7S8830) | ||||
2M-4208 | [4] | SPACER (.174 Thick) | ||
2M-4209 | [4] | SPACER (.178" Thick) | ||
2M-4210 | [4] | SPACER (.182" Thick) | ||
2M-4211 | [4] | SPACER (.186" Thick) | ||
2M-4212 | [4] | SPACER (.190" Thick) | ||
5M-2691 | [4] | SPACER (.194" Thick) | ||
5M-2697 | [4] | SPACER (.170" Thick) | ||
5S-7189 | [4] | SPACER (.198" Thick) | ||
(Use as required) | ||||
9H-1296 | [1] | BEARING | ||
(Part of Housing Assem. 7S8830) | ||||
2S-0825 | [1] | RACK | ||
9H-1284 | [1] | BEARING | ||
(Part of Housing Assem. 7S8830) | ||||
1M-0690 | [1] | SLEEVE | ||
(Part of Camshaft Assem 8H9207) | ||||
8H-9207 | [1] | CAMSHAFT ASSEM. | ||
7S-8830 | [1] | HOUSING ASSEM. | ||
C | INDICATES CHANGE |
#UEG0055S0057
5S-9922: FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES (5S9922 N/S)
Serial No. 41K1 to 41K2502, 2561 to 2563, 2566 to 2578, 2580 to 2585, 2587 to 2596, 2598 & 41K2599 inclusive
Serial No. 41K1 to 41K2502, 2561 to 2563, 2566 to 2578, 2580 to 2585, 2587 to 2596, 2598 & 41K2599 inclusive
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [1] | LINE ASSEM. (No. 4) | ||
2. | [1] | LINE ASSEM. (No. 3) | ||
3. | [1] | LINE ASSEM. (No. 2) | ||
4. | [1] | LINE ASSEM. (No. 1) | ||
5. | [4] | NUT | ||
6. | [4] | BODY | ||
7. | [4] | VALVE SERVICE GROUP | ||
8. | [1] | SEAL ASSEM. | ||
9. | [1] | SEAL | ||
10. | C | [1] | FITTING | |
11. | [1] | CLIP | ||
12. | [1] | TUBE | ||
13. | [1] | BOLT (1.125" Long) | ||
14. | [5] | LOCKWASHER | ||
15. | [2] | SEAL | ||
16. | [1] | BOLT (1.125" Long) | ||
17. | [1] | BRACKET | ||
18. | [1] | COVER | ||
[1] | GASKET | |||
19. | [1] | SEAL | ||
20. | [2] | BOLT (1" Long) | ||
21. | [1] | BOLT (4" Long) | ||
[1] | LOCKWASHER | |||
22. | [1] | BOLT (1.75" Long) | ||
23. | [1] | SEAL | ||
C | INDICATES CHANGE |
#UEG0055S0058
5S-9922: FUEL INJECTION VALVES AND LINES GROUP
5S9922 FUEL INJECTION VALVES AND LINES GROUP
Serial No. 41K2503 to 41K2560, 2564, 2565, 2579, 2586, 2597 & 41K2600-Up
Serial No. 41K2503 to 41K2560, 2564, 2565, 2579, 2586, 2597 & 41K2600-Up
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5S-7214 | [1] | LINE ASSEM. (No. 4) | |
2. | 5S-7213 | [1] | LINE ASSEM. (No. 3) | |
3. | 5S-7212 | [1] | LINE ASSEM. (No. 2) | |
4. | 5S-7211 | [1] | LINE ASSEM. (No. 1) | |
5. | 5H-7225 | [4] | NUT | |
6. | 8S-2389 | [4] | BODY | |
7. | 8M-1584 | [4] | VALVE SERVICE GROUP | |
8. | 6F-1069 | [1] | SEAL ASSEM. | |
9. | 5B-3718 | [1] | SEAL | |
10. | 1P-9328 | [1] | FITTING | |
11. | 9S-1350 | [1] | CLIP | |
12. | 5S-7223 | [1] | TUBE | |
13. | 1A-2029 | [1] | BOLT 2.86 cm(1.125 in.) long | |
14. | 3B-4506 | [5] | LOCKWASHER | |
15. | 8M-5248 | [2] | SEAL | |
16. | 8M-5260 | [1] | SEAL | |
17. | 2P-3949 C | [1] | BRACKET | |
18. | 5M-3154 | [1] | COVER | |
7H-3270 | [1] | GASKET | ||
19. | 8M-5253 | [1] | SEAL | |
20. | 0S-1594 C | [3] | BOLT 2.54 cm(1 in.) long | |
21. | 1B-2886 C | [1] | BOLT 9.53 cm(3.75 in.) long | |
3B-4508 | [1] | LOCKWASHER | ||
22. | 0S-1571 | [1] | BOLT 4.45 cm(1.75 in.) long | |
C | INDICATES CHANGE |
#UEG0055S0059
7S-9463: OIL PUMP
7S9463 OIL PUMP
Serial No. 41K1 to 41K188 inclusive
Serial No. 41K1 to 41K188 inclusive
Parts for your 930 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1A-2029 | [2] | BOLT | |
7H-1861 | [2] | LOCK | ||
2. | 6H-4208 | [1] | LOCK | |
3. | 0S-1590 | [4] | BOLT | |
4. | 2P-2221 | [1] | ELBOW ASSEM. | |
5. | 4B-3938 | [2] | PLUG | |
6. | 0S-1594 | [2] | BOLT | |
7. | 8S-9300 | [1] | BELL ASSEM. | |
8. | 8M-0904 | [1] | GASKET | |
9. | 7S-9461 Y | [1] | PUMP GROUP | |
(Separate Illustration) | ||||
10. | 8S-8874 | [1] | LOCK | |
11. | 0T-0329 | [1] | LOCK | |
12. | 7H-1796 | [1] | GASKET | |
Y | SEPARATE ILLUSTRATION |
Information:
OPERATOR STATION
PANEL GP
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Instructions for Installing Indicator Kit on Certain Cat<SUP>®</SUP> Products {7431}
Instructions for Installing Indicator Kit on Certain Cat® Products {7431}
Instructions for Installing Indicator Kit on Certain Cat® Products {7431}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01