POWER TRAIN
WHEEL GPDIFFERENTIAL & BEVEL GEAR GP
FRAME AND BODY
COUNTERWEIGHT GPPOWER TRAIN
DIFFERENTIAL & BEVEL GEAR GPPOWER TRAIN
WHEEL GP#UEG0055S0440
4K-6271: RIM GROUP
4K6271 RIM GROUP--4 Required--17.50 x 25 Tubeless Tires--Type 2
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4K-4907 | [1] | FLANGE | ||
| 4K-4881 | [1] | RING | ||
| (NOT SHOWN-NOT PART OF RIM GROUP) | ||||
| 6K-9316 | [10] | NUT | ||
| 6K-0249 | [1] | VALVE ASSEM | ||
| CONSISTING OF | ||||
| 2D-2628 | [1] | CORE | ||
| 2D-2633 | [1] | CAP | ||
| (PART OF HOUSING ASSEM. 6D443) | ||||
| 6D-0443 | [1] | HOUSING ASSEM. | ||
| [1] | STEM | |||
| 2D-2631 | [1] | NUT | ||
| 2D-2630 | [1] | WASHER | ||
| 2D-2629 | [1] | GROMMET | ||
| 9K-5780 | [1] | RIM ASSEM. | ||
| 4K-4879 | [1] | SEAL | ||
#UEG0055S0441
7K-8752: RIM GROUP
7K8752 RIM GROUP--4 Required--20.50 x 25 Tubeless Tires--Type 1
Serial No. 41K395-Up
Serial No. 41K395-Up
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-8753 | [1] | RIM ASSEM. | |
| 2. | 2D-5279 | [2] | FLANGE | |
| 3. | 3K-7757 | [1] | BAND | |
| 4. | 2D-5272 | [1] | RING | |
| 5. | 6D-0337 | [1] | VALVE ASSEM. | |
| 8D-2707 | [1] | SPUD ASSEM. | ||
| 6. | 2D-2629 | [1] | GROMMET | |
| 7. | 2D-2631 | [1] | NUT | |
| 2D-2630 | [1] | WASHER | ||
| 8. | 6D-0443 | [1] | HOUSING ASSEM. | |
| 9. | 2D-2628 | [1] | CORE | |
| 10. | 2D-2633 | [1] | CAP | |
| 11. | 2D-2443 | [1] | SEAL | |
| 12. | 3K-0453 | [10] | NUT |
#UEG0055S0442
7K-8752: RIM GROUP
7K8752 RIM GROUP--4 Required--20.50 x 25 Tubeless Tires--Type 2
Serial No. 41K395-Up
Serial No. 41K395-Up
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | C | [1] | RIM ASSEM. | |
| 2. | [2] | FLANGE | ||
| 3. | [1] | BAND | ||
| 4. | [1] | RING | ||
| 5. | [1] | VALVE ASSEM. | ||
| [1] | SPUD ASSEM. | |||
| 6. | [1] | GROMMET | ||
| 7. | [1] | NUT | ||
| [1] | WASHER | |||
| 8. | [1] | HOUSING ASSEM. | ||
| 9. | [1] | CORE | ||
| 10. | [1] | CAP | ||
| 11. | [1] | SEAL | ||
| 12. | C | [10] | NUT | |
| C | INDICATES CHANGE | |||
#UEG0055S0443
5K-5606: DIFFERENTIAL GROUP
5K5606 DIFFERENTIAL GROUP--Torque Proportioning--Type 1
Serial No. 41K1 to 41K2564 inclusive
FOR USE WITH FRONT AND REAR AXLE
6K5810 Differential Group, consisting of: 2-5K5606 Differential Groups, is available
Serial No. 41K1 to 41K2564 inclusive
FOR USE WITH FRONT AND REAR AXLE
6K5810 Differential Group, consisting of: 2-5K5606 Differential Groups, is available
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 5K-5617 | [2] | GEAR (14 Teeth) | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 5K-5613 | [4] | PINION (6 Teeth-Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 7K-2356 | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 5K-5614 | [8] | PINION (5 Teeth-Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 C | [2] | RING | |
| 13. | 4K-7502 | [12] | BOLT | |
| 14. | 6K-1815 | [8] | PIN | |
| 15. | 5K-5522 | [1] | CASE | |
| 16. | 0S-0214 | [24] | BOLT | |
| 17. | 8M-4867 | LOCKWIRE 5 feet | ||
| 18. | 5K-5615 | [2] | COVER ASSEM. | |
| 19. | 6K-1984 | [2] | DOWEL | |
| 7K-8647 | [1] | PLATE (Instruction) | ||
| 4B-4158 | [4] | SCREW | ||
| (NOT SHOWN-Mounted on R.H. Side Dash) | ||||
| C | INDICATES CHANGE | |||
#UEG0055S0444
5K-1616: SIDE COUNTERWEIGHT GROUP
5K1616 SIDE COUNTERWEIGHT GROUP--740 pounds
FOR USE WITH SIDE DUMP BUCKET OR MULTI-PURPOSE BUCKET
FOR USE WITH SIDE DUMP BUCKET OR MULTI-PURPOSE BUCKET
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS#UEG0055S0445
5K-5606: DIFFERENTIAL GROUP
5K5606 DIFFERENTIAL GROUP--Torque Proportioning--Type 2
Serial No. 41K1 to 41K2564 inclusive
FOR USE WITH FRONT AND REAR AXLE
6K5810 Differential Group consisting of: 2-5K5606 Differential Groups, is available
Serial No. 41K1 to 41K2564 inclusive
FOR USE WITH FRONT AND REAR AXLE
6K5810 Differential Group consisting of: 2-5K5606 Differential Groups, is available
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 9K-8598 C | [2] | GEAR (14 Teeth) | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 9K-8560 C | [4] | PINION (6 Teeth - Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 9K-8559 C | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 9K-8561 C | [8] | PINION (5 Teeth - Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 C | [1] | RING | |
| 13. | 4K-7502 | [12] | BOLT | |
| 14. | 9K-8318 C | [8] | PIN | |
| 15. | 9K-6968 C | [1] | CASE | |
| 16. | 0S-0214 | [24] | BOLT | |
| 17. | 8M-4867 | LOCKWIRE 5 Feet | ||
| 18. | 9K-4916 C | [1] | COVER ASSEM. | |
| 19. | 6K-1984 | [2] | DOWEL | |
| 20. | 9K-4910 C | [2] | COVER ASSEM. | |
| 21. | 6K-1984 | [2] | DOWEL | |
| 22. | 9K-4909 | [1] | BEARING | |
| C | INDICATES CHANGE | |||
#UEG0055S0446
8K-5992: DIFFERENTIAL GP
8K5992 DIFFERENTIAL GROUP--Torque Proportioning--Type 1
Serial No. 41K2565-Up
FOR USE WITH FRONT AND REAR AXLE
8K5994 Differential Group, consisting of: 2-8K5992 Differential Groups, is available
Serial No. 41K2565-Up
FOR USE WITH FRONT AND REAR AXLE
8K5994 Differential Group, consisting of: 2-8K5992 Differential Groups, is available
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | C | [2] | GEAR (14 Teeth) | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 5K-5613 | [4] | PINION (6 Teeth-Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 7K-2356 | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 5K-5614 | [8] | PINION (5 Teeth-Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 | [1] | RING | |
| 13. | 4K-7502 | [12] | BOLT | |
| 14. | 6K-1815 | [8] | PIN | |
| 15. | 9K-6968 C | [1] | CASE | |
| 16. | 0S-0214 | [24] | BOLT | |
| 17. | 4S-8743 H | LOCKWIRE 5 feet | ||
| 18. | 5K-5615 | [2] | COVER ASSEM. | |
| 19. | 6K-1984 | [2] | DOWEL | |
| 7K-8647 | [1] | PLATE (Instruction) | ||
| 4B-4158 | [4] | SCREW | ||
| (NOT SHOWN-Mounted on R.H. Side Dash) | ||||
| C | INDICATES CHANGE | |||
| H | ORDER BY THE FOOT | |||
#UEG0055S0447
5K-5606: DIFFERENTIAL GROUP
5K5606 DIFFERENTIAL GROUP--Torque Proportioning--Type 3
Serial No. 41K1 to 41K2564 inclusive
FOR USE WITH FRONT AND REAR AXLE
6K5810 Differential Group consisting of: 2-5K5606 Differential Groups is available
Serial No. 41K1 to 41K2564 inclusive
FOR USE WITH FRONT AND REAR AXLE
6K5810 Differential Group consisting of: 2-5K5606 Differential Groups is available
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 9K-8598 | [2] | GEAR (14 Teeth) | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 9K-8560 | [4] | PINION (6 Teeth - Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 9K-8559 | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 9K-8561 | [8] | PINION (5 Teeth - Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 | [1] | RING | |
| 13. | 4K-7502 | [12] | BOLT | |
| 14. | 9K-8318 | [8] | PIN | |
| 15. | 9K-8915 C | [1] | CASE | |
| 16. | 9S-1381 C | [24] | BOLT | |
| 17. | 8M-4867 | LOCKWIRE 5 Feet | ||
| 18. | 9K-4916 | [1] | COVER ASSEM. | |
| 19. | 6K-1984 | [2] | DOWEL | |
| 20. | 9K-4910 | [2] | COVER ASSEM. | |
| 21. | 6K-1984 | [2] | DOWEL | |
| 22. | 9K-4909 | [1] | BEARING | |
| C | INDICATES CHANGE | |||
#UEG0055S0448
8K-5992: DIFFERENTIAL GP
8K5992 DIFFERENTIAL GROUP--Torque Proportioning--Type 3
Serial No. 41k2565-Up
FOR USE WITH FRONT AND REAR AXLE
8K5994 Differential Group, consisting of 2-8K5992 Differential Groups is available
Serial No. 41k2565-Up
FOR USE WITH FRONT AND REAR AXLE
8K5994 Differential Group, consisting of 2-8K5992 Differential Groups is available
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 8K-5993 | [2] | GEAR (28 Teeth) | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 9K-8560 | [4] | PINION (6 Teeth-Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 9K-9921 | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 9K-8561 | [8] | PINION (5 Teeth-Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 | [1] | RING | |
| 13. | 4K-7502 | [12] | BOLT | |
| 14. | 9K-8318 | [8] | PIN | |
| 15. | 9K-8915 C | [1] | CASE | |
| 16. | 5H-9707 C | [24] | BOLT | |
| 17. | 3P-1389 CH | LOCKWIRE 14.22 dm(56 in.) | ||
| 18. | 9K-4916 | [2] | COVER ASSEM. | |
| 19. | 6K-1984 | [2] | DOWEL | |
| 20. | 9K-4910 | [1] | COVER ASSEM. | |
| 21. | 6K-1984 | [1] | DOWEL | |
| 22. | 9K-4909 | [1] | BEARING | |
| 7K-8647 J | [1] | PLATE (Instruction) | ||
| 4B-4158 | [4] | SCREW | ||
| C | INDICATES CHANGE | |||
| H | ORDER BY THE DECIMETRE | |||
| J | NOT SHOWN-MOUNTED ON R.H. SIDE DASH | |||
#UEG0055S0449
8K-5992: DIFFERENTIAL GP
8K5992 DIFFERENTIAL GROUP--Torque Proportioning--Type 2
Serial No. 41K2565-Up
FOR USE WITH FRONT AND REAR AXLE
8K5994 Differential Group, consisting of 2-8K5992 Differential Groups, is available
Serial No. 41K2565-Up
FOR USE WITH FRONT AND REAR AXLE
8K5994 Differential Group, consisting of 2-8K5992 Differential Groups, is available
Parts for your 930 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5612 | [2] | DISC | |
| 2. | 5K-5608 | [2] | SPRING | |
| 3. | 8K-5993 C | [2] | GEAR (28 Teeth) | |
| 4. | 8F-0737 | [2] | RING | |
| 5. | 9K-8560 C | [4] | PINION (6 Teeth-Center) | |
| 6. | 5K-5611 | [4] | SHAFT (Center) | |
| 7. | 9K-9921 C | [8] | PLATE (Wear) | |
| 8. | 5K-5610 | [6] | LOCK | |
| 9. | 6K-1814 | [4] | PIN | |
| 10. | 9K-8561 C | [8] | PINION (5 Teeth-Outer) | |
| 11. | 5K-5706 | [8] | SHAFT (Outer) | |
| 12. | 2D-1523 | [1] | RING | |
| 13. | 4K-7502 | [12] | BOLT | |
| 14. | 9K-8318 C | [8] | PIN | |
| 15. | 9K-6968 | [1] | CASE | |
| 16. | 0S-0214 | [24] | BOLT | |
| 17. | 4S-8743 H | LOCKWIRE 5 ft | ||
| 18. | 9K-4916 C | [2] | COVER ASSEM. | |
| 19. | 6K-1984 | [2] | DOWEL | |
| 20. | 9K-4910 C | [1] | COVER ASSEM. | |
| 21. | 6K-1984 | [1] | DOWEL | |
| 22. | 9K-4909 | [1] | BEARING | |
| 7K-8647 J | [1] | PLATE (Instruction) | ||
| 4B-4158 | [4] | SCREW | ||
| C | INDICATES CHANGE | |||
| H | ORDER BY THE FOOT | |||
| J | NOT SHOWN-MOUNTED ON R.H. SIDE | |||
Information:
POWER TRAIN
WHEEL GP
Special Instruction
Dismounting and Mounting Tires on the Single Piece Drop Center Rims{4202}
Dismounting and Mounting Tires on the Single Piece Drop Center Rims{4202}
Dismounting and Mounting Tires on the Single Piece Drop Center Rims{4202}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>®</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Planetary Final Drives for Small and Medium Wheel Loaders and Small Integrated Tool Carriers{4050, 4051}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Disassembly and Assembly
Service Magazine




