AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6J6791 BLADE GROUP 8S Bulldozer Serial No. 44K6918 to 44K7509 inclusive For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up 8U


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP

BULLDOZER 8U BULLDOZER 20F
 8A, 8C, 8R, 8S & 8U BULLDOZERS 20F00001-UP UEG0063S 8U 20F   (1970)

WORK TOOLS

BLADE GP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
 

#UEG0063S0020
 

6J-6791: BLADE GROUP

6J6791 BLADE GROUP
8S Bulldozer Serial No. 44K6918 to 44K7509 inclusive
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c223578 UEG0063S
6J6791 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3411 [1] BRACKET ASSEM.  
2. 8J-3072 [1] CAP  
3. 6J-4795 [2] PIN  
4. 8J-2979 [20] SHIM  
5. 6J-9078 [1] MOLDBOARD ASSEM.  
6. 9J-1655 C [1] SHOE (R.H.)  
  9J-1656 [1] SHOE (L.H.)  
7. 8J-4922 C [1] BRACKET  
8. 9J-3676 C [2] BRACKET (L.H.)  
9. 8J-4924 C [1] PLATE  
10. 7J-8765 C [2] DEFLECTOR ASSEM.  
11. 8J-3410 [2] BRACKET ASSEM.  
12. 8J-3072 [1] CAP  
13. 5J-8769 [1] END BIT (R.H.)  
  5J-8770 [1] END BIT (L.H.)  
    28.58 mm(1.125 in.) thick
    - OR -
  7J-3459 [1] END BIT (R.H.)  
  7J-3460 [1] END BIT (L.H.)  
    41.28 mm(1.625 in.) thick
14. 3B-8489 [2] FITTING  
15. 6J-7116 [2] CUTTING EDGE  
    25.40 mm(1 in.) thick
    - OR -
  7J-2971 [2] CUTTING EDGE  
    41.28 mm(1.625 in.) thick
16. 5J-2409 [34] BOLT  
  2J-3505 [34] NUT  
  9H-1031 [20] WASHER  
17. 6J-5790 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
18. 9J-3675 C [2] BRACKET (R.H.)  
19. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
20. 2J-2450 [1] PLATE (Serial No.)  
  4B-4159 [2] DRIVE SCREW  
21. 6J-3705 [2] BRACKET  
22. 5J-0697 [2] CONNECTOR  
23. 6J-5179 [2] RETAINER  
  6J-9286 H [4] PLATE  
    (To Provide Patch Plates)
  C   INDICATES CHANGE
  H   NOT PART OF 6J6791 GROUP
 

#UEG0063S0021
 

6J-6791: BLADE GROUP

6J6791 BLADE GROUP
8S Bulldozer Serial No. 44K7510-Up
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c223579 UEG0063S
6J6791 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3411 [1] BRACKET ASSEM.  
2. 8J-3072 [1] CAP  
3. 6J-4795 [2] PIN  
4. 8J-2979 [20] SHIM  
5. 6J-9078 [1] MOLDBOARD ASSEM.  
6. 9J-1655 [1] SHOE (R.H.)  
  9J-1656 [1] SHOE (L.H.)  
7. 8J-4922 [1] BRACKET  
8. 9J-7534 C [2] BRACKET ASSEM. (L.H.)  
9. 8J-4924 [1] PLATE  
10. 7J-8765 C [2] DEFLECTOR ASSEM.  
11. 8J-3410 [1] BRACKET ASSEM.  
12. 8J-3072 [1] CAP  
13. 5J-8769 [1] END BIT (R.H.)  
  5J-8770 [1] END BIT (L.H.)  
    28.58 mm(1.125 in.) thick
    - OR -
  7J-3459 H [1] END BIT (R.H.)  
  7J-3460 H [1] END BIT (L.H.)  
    41.28 mm(1.625 in.) thick
14. 3B-8489 [2] FITTING  
15. 6J-7116 [2] CUTTING EDGE  
    25.40 mm(1 in.) thick
    - OR -
  7J-2971 [2] CUTTING EDGE  
    41.28 mm(1.625 in.) thick
16. 5J-2409 [34] BOLT  
  2J-3505 [34] NUT  
  9H-1031 [20] WASHER  
17. 6J-5790 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
18. 9J-7533 C [2] BRACKET ASSEM. (R.H.)  
19. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
20. 2J-2450 [1] PLATE  
    (Serial No.)
  4B-4159 [2] DRIVE SCREW  
21. 6J-3705 [2] BRACKET  
22. 5J-0697 [2] CONNECTOR  
23. 6J-5179 [2] RETAINER  
  6J-9286 H [4] PLATE  
    (To Provide Patch Plates)
  C   INDICATES CHANGE
  H   NOT PART OF 6J6791 GROUP
 

#UEG0063S0022
 

6J-6791: BLADE GROUP

6J6791 BLADE GROUP
8S Bulldozer Serial No. 69E1 to 69E462 inclusive
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
j5515e UEG0063S
6J6791 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-6820 [1] BRACKET ASSEM.  
2. 6J-6832 [1] RETAINER  
3. 5J-5022 [2] END BIT (Upper)  
4. 6J-2844 [2] END BIT (Lower)  
5. 6J-6811 [1] SHOE ASSEM. (Right Hand)  
  6J-6812 [1] SHOE ASSEM. (Left Hand)  
6. 6J-9505 [2] DEFLECTOR  
7. 5A-9472 H [1] PLATE (Serial No.)  
  4B-4159 H [2] DRIVE SCREW  
8. 6J-7313 [1] BRACKET ASSEM. (Right Hand)  
9. 6J-7314 [1] BRACKET ASSEM. (Left Hand)  
10. 3B-8489 [2] FITTING  
11. 6J-4795 [2] PIN  
12. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
13. 6J-5179 [2] RETAINER  
14. 5J-0697 [2] CONNECTOR  
15. 5J-8769 [1] END BIT (Right Hand)  
  5J-8770 [1] END BIT (Left Hand)  
16. 5J-2409 [34] BOLT  
  2J-3505 [34] NUT  
  9H-1031 [20] WASHER  
17. 6J-3705 [2] BRACKET  
18. 7J-9566 [2] BRACKET  
19. 6J-7116 [2] CUTTING EDGE  
  H   NOT PART OF 6J6791 BLADE GROUP
 

#UEG0063S0023
 

6J-6791: BLADE GROUP

6J6791 BLADE GROUP
8S Bulldozer Serial No. 69E463-Up
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
j7401e UEG0063S
6J6791 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-4924 [1] PLATE  
2. 8J-4922 [1] BRACKET  
3. 7J-8765 [2] DEFLECTOR ASSEM.  
4. 5A-9472 H [1] PLATE (Serial No.)  
  4B-4159 H [2] DRIVE SCREW  
5. 8J-3410 [1] BRACKET ASSEM. (R.H.)  
6. 8J-3411 [1] BRACKET ASSEM. (L.H.)  
7. 8J-3072 [2] CAP  
    (1 Each in 8J3410 & 8J3411 Bracket Assem)
8. 8J-2979 [20] SHIM (0.80mm)  
9. 3B-8489 [2] FITTING  
10. 6J-5169 [1] RETAINER  
11. 5J-5022 [2] END BIT (Upper)  
12. 6J-4795 [2] PIN  
13. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
14. 6J-5179 [2] RETAINER  
15. 6J-2844 [2] END BIT (Lower)  
16. 5J-0697 [2] CONNECTOR  
17. 6J-6811 [1] SHOE ASSEM. (R.H.)  
  6J-6812 [1] SHOE ASSEM. (L.H.)  
18. 5J-8769 [1] END BIT (R.H.)  
  5J-8770 [1] END BIT (L.H.)  
19. 5J-2409 [34] BOLT  
  2J-3505 [34] NUT  
20. 6J-3705 [2] BRACKET  
21. 7J-9566 [2] BRACKET  
22. 6J-7116 [2] CUTTING EDGE  
23. 9H-1031 [20] WASHER  
  H   NOT PART OF 6J6791 BLADE GROUP
 

#UEG0063S0024
 

8J-0965: CUTTING EDGE AND END BIT GROUP

8J965 CUTTING EDGE AND END BIT GROUP
8S Bulldozer Serial No. 44K1-Up
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c112394 UEG0063S
8J0965 CUTTING EDGE AND END BIT GROUP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [14] BOLT  
2. [34] NUT  
3. [34] WASHER  
4. [20] BOLT  
5. [2] EDGE  
6. [1] END BIT (R.H.)  
  [1] END BIT (L.H.)  
 

#UEG0063S0025
 

9J-1880: END BIT GROUP

9J1880 END BIT GROUP
8S Bulldozer Serial No. 44K1-Up. Provides forged end bits
Only separate parts serviced. AN ATTACHMENT
c999999 UEG0063S
9J1880 END BIT GROUP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
47. 8T-4183 M [10] BOLT (M12X1.75X40MM)  
48. 8T-4194 M [20] BOLT (M12X1.75X50MM)  
49. 1P-5767 [22] FLANGE-HALF  
50. 4Q-0707 [2] CONNECTOR-QUICK  
51. 4Q-0579 [2] CAP-QUICK  
52. 107-3636 [2] CONNECTOR  
53. 107-3637 [2] SEAL  
54. 005-6985 [2] NIPPLE AS  
55. 132-7100 [2] CAP-DUST  
56. 6V-8634 [2] CONNECTOR-O-RING  
57. 127-6816 [2] PLATE  
58. 142-0473 [2] HOSE AS  
59. 6V-8398 [4] SEAL-O-RING (16.03MM OD)  
60. 132-9172 [2] PLATE  
61. 6V-8995 [2] UNION-BULKHEAD (13/16-16 THD)  
62. 6V-9169 [2] NUT-BULKHEAD (11/16-16 THD)  
63. 142-0472 [2] HOSE AS  
64. 178-4943 [1] HOSE AS  
65. 178-4942 [2] HOSE AS  
66. 131-4063 [1] TUBE AS  
67. 131-4064 [1] TUBE AS  
68. 132-9174 [2] HOSE AS  
69. 143-4294 [2] HOSE AS  
70. 137-1594 [7] VALVE AS-BALL  
71. 7X-2543 M [14] BOLT (M10X1.5X120MM)  
72. 9S-4191 [7] PLUG-O-RING (9/16-18 THD)  
73. 8T-4184 M [28] BOLT (M12X1.75X45MM)  
74. 141-8032 [1] PLATE  
75. 113-2004 M [4] BOLT-HEX (M12X1.75X45MM)  
76. 5K-9090 [3] SEAL-O-RING (23.52MM ID)  
77. 8T-4244 [2] NUT (M12X1.75 THD)  
78. 130-9862 [1] BRACKET  
79. 6V-8998 [1] UNION-O-RING (1-7/16-12 THD)  
80. 6V-9172 [1] NUT-BULKHEAD (1-7/16 - 12 THD)  
81. 6V-8994 [2] UNION-BULKHEAD (11/16-16 THD)  
82. 6V-9168 [2] NUT (11/16-16 THD)  
83. 7Y-4199 [2] HOSE AS  
  I   SEE HOSE FABRICATION GUIDE
  M   METRIC PART
 

#UEG0063S0026
 

6J-6350: BLADE GP

6J6350 BLADE GROUP
8U Bulldozer Serial No. 45K1 to 45K1441 inclusive
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c112344 UEG0063S
6J6350 BLADE GP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-7314 [1] BRACKET ASSEM.  
2. 7J-5622 [1] CAP  
3. 6J-4795 [2] PIN  
4. 6J-6348 [1] MOLDBOARD ASSEM.  
5. 6J-9803 [1] REINFORCEMENT (R.H.)  
  6J-9804 [1] REINFORCEMENT (L.H.)  
6. 6J-6185 [1] SHOE ASSEM. (R.H.)  
  6J-6186 [1] SHOE ASSEM. (L.H.)  
7. 6J-6360 [2] END BIT (Lower)  
8. 5J-5022 [2] END BIT (Upper)  
9. 6J-6820 [1] BRACKET ASSEM.  
10. 6J-9505 [2] DEFLECTOR  
11. 6J-7313 [1] BRACKET ASSEM.  
12. 7J-5622 [1] CAP  
13. 5J-8767 [1] END BIT (R.H.)  
  5J-8768 [1] END BIT (L.H.)  
    (1.125" Thick)
    -OR-
  7J-3457 H [1] END BIT (R.H.)  
  7J-3458 H [1] END BIT (L.H.)  
    (1.625" Thick)
14. 3B-8489 [2] FITTING  
15. 5J-6894 [1] CUTTING EDGE (Center)  
    (1.00" Thick)
    -OR-
  7J-2973 [1] CUTTING EDGE (Center)  
    (1.625" Thick)
16. 5J-2409 [36] BOLT  
  2J-3505 [36] NUT  
  9H-1031 [36] WASHER  
17. 6J-5790 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
18. 6J-6795 [2] BRACKET  
19. 6J-9284 [2] CUTTING EDGE  
    (1.00" Thick)
    -OR-
  7J-2974 [2] CUTTING EDGE  
    (1.625" Thick)
20. 2J-2442 [1] PLATE (Serial No.)  
  4B-4159 [2] DRIVE SCREW  
21. 6J-3705 [2] BRACKET  
22. 5J-0697 [2] CONNECTOR  
23. 6J-5179 [2] RETAINER  
24. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
  6J-9420 [1] WEAR PLATE (L.H.)  
  6J-9419 [1] WEAR PLATE (R.H.)  
  6J-9286 [4] PLATE  
    (To Provide Patch Plates-Not Shown)
  H   NOT PART OF 6J6350 GROUP
 

#UEG0063S0027
 

6J-6350: BLADE GP

6J6350 BLADE GROUP
8U Bulldozer Serial No. 45K1442 to 45K1745 inclusive
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c137041 UEG0063S
6J6350 BLADE GP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3411 [1] BRACKET ASSEM.  
2. 8J-3072 [1] CAP  
3. 8J-2979 [20] SHIM  
4. 6J-6348 [1] MOLDBOARD ASSEM.  
5. 6J-9803 [1] REINFORCEMENT (R.H.)  
  6J-9804 [1] REINFORCEMENT (L.H.)  
6. 6J-6185 [1] SHOE ASSEM. (R.H.)  
  6J-6186 [1] SHOE ASSEM. (L.H.)  
7. 6J-6360 [2] END BIT (Lower)  
8. 5J-5022 [2] END BIT (Upper)  
9. 6J-6820 [1] BRACKET ASSEM.  
10. 6J-9505 [2] DEFLECTOR  
11. 8J-3410 [1] BRACKET ASSEM.  
12. 8J-3072 [1] CAP  
13. 5J-8767 [1] END BIT (R.H.)  
  5J-8768 [1] END BIT (L.H.)  
    (1.125" Thick)
    -OR-
  7J-3457 H [1] END BIT (R.H.)  
  7J-3458 H [1] END BIT (L.H.)  
    (1.625" Thick)
14. 3B-8489 [2] FITTING  
15. 5J-6894 [1] CUTTING EDGE (Center)  
    (1.00" Thick)
    -OR-
  7J-2973 H [1] CUTTING EDGE (Center)  
    (1.625" Thick)
16. 5J-2409 [36] BOLT  
  2J-3505 [36] NUT  
  9H-1031 [36] WASHER  
17. 6J-5790 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
18. 7J-9566 [2] BRACKET  
19. 6J-9284 [2] CUTTING EDGE  
    (1.00" Thick)
    -OR-
  7J-2974 [2] CUTTING EDGE  
    (1.625" Thick)
20. 2J-2442 [1] PLATE (Serial No.)  
  4B-4159 [2] DRIVE SCREW  
21. 6J-3705 [2] BRACKET  
22. 5J-0697 [2] CONNECTOR  
23. 6J-5179 [2] RETAINER  
24. 6J-4795 [2] PIN  
25. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
  H   NOT PART OF 6J6350 GROUP
 

#UEG0063S0028
 

6J-6350: BLADE GP

6J6350 BLADE GROUP
8U Bulldozer Serial No. 45K1746 to 45K2282 inclusive
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c139580 UEG0063S
6J6350 BLADE GP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3411 [1] BRACKET ASSEM.  
2. 8J-3072 [1] CAP  
3. 8J-2979 [20] SHIM  
4. 6J-6348 [1] MOLDBOARD ASSEM.  
5. 6J-9803 [1] REINFORCEMENT (R.H.)  
  6J-9804 [1] REINFORCEMENT (L.H.)  
6. 6J-6185 [1] SHOE ASSEM. (R.H.)  
  6J-6186 [1] SHOE ASSEM. (L.H.)  
7. 6J-6360 [2] END BIT (Lower)  
8. 5J-5022 [2] END BIT (Upper)  
9. 8J-4924 C [1] PLATE  
10. 7J-8765 C [2] DEFLECTOR ASSEM.  
11. 8J-3410 [1] BRACKET ASSEM.  
12. 8J-3072 [1] CAP  
13. 5J-8767 [1] END BIT (R.H.)  
  5J-8768 [1] END BIT (L.H.)  
    (1.125" Thick)
    -OR-
  7J-3457 H [1] END BIT (R.H.)  
  7J-3458 H [1] END BIT (L.H.)  
    (1.625" Thick)
14. 3B-8489 [2] FITTING  
15. 5J-6894 [1] CUTTING EDGE (Center)  
    (1.00" Thick)
    -OR-
  7J-2973 H [1] CUTTING EDGE (Center)  
    (1.625" Thick)
16. 5J-2409 [36] BOLT  
  2J-3505 [36] NUT  
  9H-1031 [36] WASHER  
17. 6J-5790 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
18. 7J-9566 [2] BRACKET  
19. 6J-9284 [2] CUTTING EDGE  
    (1.00" Thick)
    -OR-
  7J-2974 [2] CUTTING EDGE  
    (1.625" Thick)
  2J-2442 [1] PLATE (Serial No.)  
  4B-4159 [2] DRIVE SCREW  
21. 6J-3705 [2] BRACKET  
22. 5J-0697 [2] CONNECTOR  
23. 6J-5179 [2] RETAINER  
24. 6J-4795 [2] PIN  
25. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
26. 8J-4922 C [1] BRACKET  
  C   INDICATES CHANGE
  H   NOT PART OF 6J6350 GROUP
 

#UEG0063S0029
 

6J-6350: BLADE GP

6J6350 BLADE GROUP
8U Bulldozer Serial No. 45K2283 to 45K2444 inclusive
For D8 Tractors Serial No. 36A5106-Up and 46A19392-Up
c150787 UEG0063S
6J6350 BLADE GP Parts scheme
  For full view, you need register

Parts for your 8U BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-3411 [1] BRACKET ASSEM.  
    (Includes)
2. 8J-3072 [1] CAP  
3. 8J-2979 [20] SHIM  
4. 6J-6348 [1] MOLDBOARD ASSEM.  
    (Includes)
5. 9J-1648 C [1] SHOE (R.H.)  
6. 9J-1647 C [1] SHOE (L.H.)  
7. 9J-3675 C [2] BRACKET ASSEM. (R.H.)  
9. 8J-4924 [1] PLATE  
10. 7J-8765 [2] DEFLECTOR ASSEM.  
11. 8J-3410 [1] BRACKET ASSEM.  
12. 8J-3072 [1] CAP  
13. 5J-8767 [1] END BIT (R.H.)  
  5J-8768 [1] END BIT (L.H.)  
    1.125 in. (2.86 cm) thick
    -OR-
  7J-3457 H [1] END BIT (R.H.)  
  7J-3458 H [1] END BIT (L.H.)  
    1.625 in. (4.13 cm) thick
14. 3B-8489 [2] FITTING  
15. 5J-6894 [1] CUTTING EDGE (Center)  
    1.00 in. (2.54 cm) thick
    -OR-
  7J-2973 H [1] CUTTING EDGE (Center)  
    1.625 in. (4.13 cm) thick
16. 5J-2409 [36] BOLT  
16. 2J-3505 [36] NUT  
  9H-1031 [36] WASHER  
17. 6J-5790 H [1] HITCH BRACKET GROUP  
    (Consists of 2 Brackets)
18. 9J-3676 C [2] BRACKET ASSEM. (L.H.)  
19. 6J-9284 [2] CUTTING EDGE  
    1.00 in. (2.54 cm) thick
    -OR-
  7J-2974 [2] CUTTING EDGE  
    1.625 in. (4.13 cm) thick
20. 2J-2442 [1] PLATE (Serial No.)  
  4B-4159 [2] DRIVE SCREW  
21. 6J-3705 [2] BRACKET  
22. 5J-0697 [2] CONNECTOR  
23. 6J-5179 [2] RETAINER  
24. 6J-4795 [2] PIN  
25. 2H-3757 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
26. 8J-4922 [1] BRACKET  
  C   INDICATES CHANGE
  H   NOT PART OF 6J6350 GROUP
 

Information:

Special Instruction
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Service Magazine
Blocks And Retainer Used In Push Arm And Brace Groups To Better Hold Linkage Pins{6061,6072,6073,6051,6053,6056}
1981/01/26
Special Instruction SEHS9429-01 Available for Spherical Bearings for Bulldozers and Rippers{7551,6050,6313}
1995/01/16

Caterpillar Parts SIS Catalog 8U :

BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
CUTTING EDGE AND END BIT GROUP
8J-0966 CUTTING EDGE AND END BIT GROUP
6J-9040 BLADE GROUP
BLADE GROUP
6J-9040 BLADE GROUP
6J-9040 BLADE GROUP
BLADE GROUP
6J-9040 BLADE GROUP
6J-9040 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
BLADE GROUP
6J-6791 BLADE GROUP
CUTTING EDGE AND END BIT GROUP
8J-0965 CUTTING EDGE AND END BIT GROUP
9J-1880 END BIT GROUP
BLADE GP
6J-6350 BLADE GP
BLADE GP
6J-6350 BLADE GP
BLADE GP
6J-6350 BLADE GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.